This Hybrid Device is widely used in Roman EDFA,It has low insertion loss, high isolation, high stability and reliability.
SANDI SDP series Pure Sine Wave Inverter is the one of the most advanced technology DC to AC conversion products in the world, it's suitable use for areas without electricity, providing a complete power solution for strict demand applications. With SVPWM technology it has high conversion efficiency, high instantaneous power and low losses power output pure sine wave, applying to capacitive, inductive and nonlinear mixed-load, with superior load capacity, perfect protection function: overload, short circuit, low/over battery voltage, improper operation etc. This Inverter is very suitable for solar power systems, wind power generation systems, wind and solar hybrid generation systems. The inverter can supply AC power to all kinds of electric equipment, air conditioners, electric motors, refrigerators, fluorescent lights, televisions, electric fans and other industrial power supply. Technical Features: 1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions and convenient replacement and maintenance. 2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection. 3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance. 4, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converterâ??s usage, which reduced the cost of equipment investment, easy to connect wires and control. 5, The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy ±1%. 6, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel. 7, Output AC Power is suitable for all types of electrical equipment, CNC machines, electric tools, motors, pump and air conditioner etc. It has higher efficiency and higher capability of driving load. 8, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation, the electric parts are completely closed to prevent electric shock. 9, Wide input voltage can be set according to customerâ??s requirement. Input voltage range can be selected from 100-300V, 200-500V or 500-850V, suitable for solar/wind system without backup batteries, it can save many cost and maximization use the solar/wind energy. 10, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance.
SANDI SDP series Pure Sine Wave Inverter is the one of the most advanced technology DC to AC conversion products in the world, it is suitable use for areas without electricity, providing a complete power solution for strict demand applications. With SVPWM technology it has high conversion efficiency, high instantaneous power and low losses power output pure sine wave, applying to capacitive, inductive and nonlinear mixed-load, with superior load capacity, perfect protection function: overload, short circuit, low/over battery voltage, improper operation etc, which wonâ??t cause mechanical failures. This Inverter is very suitable for solar power systems solar hybrid generation systems. The inverter can supply AC power to all kinds of electric equipment, air conditioners, electric motors, refrigerators, fluorescent lights, televisions, electric fans and other industrial power supply. Technical Features: 1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions and convenient replacement and maintenance. 2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection. 3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance. 4, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. 5, The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy �±1%. 6, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel. 7, Output AC Power is suitable for all types of electrical equipment, CNC machines, electric tools, motors, pump and air conditioner etc. It has higher efficiency and higher capability of driving load. 8, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation, the electric parts are completely closed to prevent electric shock. 9, Wide input voltage can be set according to customerâ??s requirement. Input voltage range can be selected from 100-300V, 200-500V or 500-850V, suitable for solar system without backup batteries, it can save many cost and maximization use the solar energy. 10, Using SVPWM space vector algorithms, high conversion efficiency, high instantaneous power and low losses conversion efficiency up to 94%. 11, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance.
SANDI SDP series Pure Sine Wave Inverter is the one of the most advanced technology DC to AC conversion products in the world, it's suitable use for areas without electricity, providing a complete power solution for strict demand applications. With SVPWM technology it has high conversion efficiency, high instantaneous power and low losses power output pure sine wave, applying to capacitive, inductive and nonlinear mixed-load, with superior load capacity, perfect protection function: overload, short circuit, low/over battery voltage, improper operation etc, which wonâ??t cause mechanical failures. This Inverter is very suitable for solar power systems, wind power generation systems, wind and solar hybrid generation systems. The inverter can supply AC power to all kinds of electric equipment, air conditioners, electric motors, refrigerators, TV, electric fans and other industrial power supply. Technical Features: 1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions and convenient replacement and maintenance. 2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection. 3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance. 4, According to the product configuration conditions, adjustment the system usage mode: DC(Battery/Solar) priority or AC mains bypass priority can be set. 5, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converterâ??s usage, which reduced the cost of equipment investment, easy to connect wires and control. 6, The output voltage can be set between -40 % to +20 % of rated voltage. 7, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel. 8, Output AC Power is suitable for all types of electrical equipment, CNC machines, electric tools, motors, pump and air conditioner etc. It has higher efficiency and higher capability of driving load. 9, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation, the electric parts are completely closed to prevent electric shock. 10, Using SVPWM space vector algorithms, high conversion efficiency, high instantaneous power and low losses conversion efficiency up to 94%. 11, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance.
SANDI SDP series Pure Sine Wave Inverter is the one of the most advanced technology DC to AC conversion products in the world, it's suitable use for areas without electricity, providing a complete power solution for strict demand applications. With SVPWM technology it has high conversion efficiency, high instantaneous power and low losses power output pure sine wave, applying to capacitive, inductive and nonlinear mixed-load, with superior load capacity, perfect protection function: overload, short circuit, low/over battery voltage, improper operation etc, which won't cause mechanical failures. This Inverter is very suitable for solar power systems, wind power generation systems, wind and solar hybrid generation systems. The inverter can supply AC power to all kinds of electric equipment, air conditioners, electric motors, refrigerators, fluorescent lights, televisions, electric fans and other industrial power supply. Technical Features: 1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions and convenient replacement and maintenance. 2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection. 3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance. 4, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. 5, The output voltage can be set between -40% to +20% of rated voltage. 6, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel. 7, Output AC Power is suitable for all types of electrical equipment, CNC machines, electric tools, motors, pump and air conditioner etc. It has higher efficiency and higher capability of driving load. 8, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation. 9, Wide input voltage can be set according to customerâ??s requirement. Input voltage range can be selected from 100-300V, 300-500V or 500-850V, suitable for solar system without backup batteries, it can save many cost and maximization use the solar energy. 10, Using SVPWM space vector algorithms, high conversion efficiency, high instantaneous power and low losses conversion efficiency up to 94%. 11, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance. 12, European CE (EMC, LVD, UL1741) and ISO9001 certificates.
SANDI SDP series Pure Sine Wave Inverter is the one of the most advanced technology DC to AC conversion products in the world, it's suitable use for areas without electricity, providing a complete power solution for strict demand applications. With SVPWM technology it has high conversion efficiency, high instantaneous power and low losses power output pure sine wave, applying to capacitive, inductive and nonlinear mixed-load, with superior load capacity, perfect protection function: overload, short circuit, low/over battery voltage, improper operation etc, which wonâ??t cause mechanical failures. This Inverter is very suitable for solar power systems, wind power generation systems, wind and solar hybrid generation systems. The inverter can supply AC power to all kinds of electric equipment, air conditioners, electric motors, refrigerators, fluorescent lights, televisions, electric fans and other industrial power supply. Technical Features: 1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions and convenient replacement and maintenance. 2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection. 3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance and reduces the hidden cost of machine failure to repair. 4, According to the product configuration conditions, adjustment the system usage mode: DC(Battery/Solar) priority or AC mains bypass priority can be set. 5, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. 6, The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy �±1%. 7, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel. 8, Output AC Power is suitable for all types of electrical equipment, CNC machines, electric tools, motors, pump and air conditioner etc. It has higher efficiency and higher capability of driving load. 9, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation, the electric parts are completely closed to prevent electric shock. 10, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance. 11, European CE (EMC, LVD, UL1741) and ISO9001 certificates.
SANDI SDP series Pure Sine Wave Inverter is the one of the most advanced technology DC to AC conversion products in the world, itâ??s suitable use for areas without electricity, providing a complete power solution for strict demand applications. With SVPWM technology it has high conversion efficiency, high instantaneous power and low losses power output pure sine wave, applying to capacitive, inductive and nonlinear mixed-load, with superior load capacity, perfect protection function: overload, short circuit, low/over battery voltage, improper operation etc, which wonâ??t cause mechanical failures. This Inverter is very suitable for solar power systems, wind power generation systems, solar hybrid generation systems. The inverter can supply AC power to all kinds of electric equipment, air conditioners, electric motors, refrigerators, fluorescent lights, televisions, electric fans and other industrial power supply. Technical Features: 1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions and convenient replacement and maintenance. 2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection. 3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance and reduces the hidden cost of machine failure to repair. 4, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converterâ??s usage, which reduced the cost of equipment investment, easy to connect wires and control. 5, The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy �±1%. 6, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel. 8, Output AC Power is suitable for all types of electrical equipment, CNC machines, electric tools, motors, pump and air conditioner etc. It has higher efficiency and higher capability of driving load. 9, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation. 10, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance. 11, European CE (EMC, LVD, UL1741) and ISO9001 certificates.
SANDI SDP series Pure Sine Wave Inverter is the one of the most advanced technology DC to AC conversion products in the world, it's suitable use for areas without electricity, providing a complete power solution for strict demand applications. With SVPWM technology it has high conversion efficiency, high instantaneous power and low losses power output pure sine wave, applying to capacitive, inductive and nonlinear mixed-load, with superior load capacity, perfect protection function: overload, short circuit, low/over battery voltage, improper operation etc, which won't cause mechanical failures. This Inverter is very suitable for solar power systems, solar hybrid generation systems. The inverter can supply AC power to all kinds of electric equipment, air conditioners, electric motors, refrigerators, fluorescent lights, TV, electric fans and other industrial power supply. Technical Features: 1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions and convenient replacement and maintenance. 2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection. 3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance. 4, According to the product configuration conditions, adjustment the system usage mode: DC(Battery/Solar) priority or AC mains bypass priority. 5, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. 6, The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy �?�±1%. 7, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel. 8, Output AC Power is suitable for all types of electrical equipment, CNC machines, electric tools, motors, pump and air conditioner etc. It has higher efficiency and higher capability of driving load. 9, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation. 10, Wide input voltage can be set according to customer's requirement. Input voltage range can be selected from 100-300V, 200-500V or 500-850V, suitable for solar system without backup batteries, it can save many cost and maximization use the solar energy. 11, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance.
SANDI SDP series Pure Sine Wave Inverter is the one of the most advanced technology DC to AC conversion products in the world, itâ??s suitable use for areas without electricity, providing a complete power solution for strict demand applications. With SVPWM technology it has high conversion efficiency, high instantaneous power and low losses power output pure sine wave, applying to capacitive, inductive and nonlinear mixed-load, with superior load capacity, perfect protection function: overload, short circuit, low/over battery voltage, improper operation etc, which wonâ??t cause mechanical failures. This Inverter is very suitable for solar power systems, solar hybrid generation systems. The inverter can supply AC power to all kinds of electric equipment, air conditioners, electric motors, refrigerators, fluorescent lights, televisions, electric fans and other industrial power supply. 1, The core components are all imported, adopting the sixth generation IPM module from Mitsubishi, which has stable performance, long service life, strong protection functions and convenient replacement and maintenance. 2, Adopt the central processor DSP28335 chip from American TI Company, respond quickly and accurately, and provide stable and clean power for the load to provide protection. 3, The whole machine adopts modular design and plug-in design, which is convenient for maintenance. 5, Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. 6, The output voltage can be set between -40 % to +20 % of rated voltage. And the output voltage is very accuracy �±1%. 7, The DC input voltage range can be set. Over-voltage point, under-voltage point, over-voltage recovery point, under-voltage recovery point all can be setting via the LCD panel. 8, Output AC Power is suitable for all types of electrical equipment, CNC machines, electric tools, motors, pump and air conditioner etc. It has higher efficiency and higher capability of driving load. 9, Humanized safety design, using isolation transformer design, input and output are completely electrically isolated, input and output are equipped with circuit breakers, which saving costs for the user and easy to installation. 10, Wide input voltage can be set according to customerâ??s requirement. Input voltage range can be selected from 100-300V, 200-500V or 500-850V, suitable for solar system without backup batteries, it can save many cost and maximization use the solar energy. 11, Using SVPWM space vector algorithms, high conversion efficiency, high instantaneous power and low losses conversion efficiency up to 94%. 12, Powerful data display function. LCD + LED display, can display input and output voltage, current, KWH, fault display, convenient for customers to quickly find faults and guide maintenance.
Ruik's Isolator & WDM Hybrid is a device to combine the functions of isolator and WDM devices. PM Isolator & WDM Hybrid Features Applications Low Insertion Loss Fiber Laser High Return Loss Fiber Amplifier High Isolation Testing Equipment High Extinction Ratio High Reliability & Stability Specifications Parameter Value Stage - Single Dual Single Dual Signal Channel Signal Wavelength Range 1064�10nm 1550�15nm Max. Insertion Loss 2.6dB 3.8dB 0.9dB 1.0dB Typ. Peak Signal Reversed Isolation, at 23 40dB 52dB 40dB 52dB Min. Signal Reversed Isolation, at 23 28dB 45dB 28dB 45dB Min. Isolation (Com to Pass @ Ref band Wavelength) 30dB Min. Extinction Ratio at 23 20dB Reflection Channel Wavelength Range 960~990nm Max. Insertion Loss 0.6dB Min. Isolation (Com to Ref @ Pass band Wavelength) 15dB Min. Extinction Ratio at 23 18dB Min. Return Loss 50dB Max. Insertion Loss Thermal Stability 0.005dB/ Max. Optical Power(CW) 300mW Max. Tensile Load 5N Operating Temperature -5~+70 Storage Temperature -40~+85 For device with connector, IL is 0.3dB higher, RL is 5dB lower, ER is 2dB lower. The default connector key is aligned to slow axis. Company introduction: High power Optical Fiber Components: -Optical Fiber Isolator, up to 100W; -Free Space Isolator, up to 100W; -Optical Circulator, up to 30W; -Pump Laser Protector; -Band Pass Filter; -Nx1 Pump Combiner; -Cladding Power Stripper; -Mode Field Adapter; -(N+1)x1 Pump & Signal Combiner, 200W/port; Polarization Maintaining Fiber Components: -In-Line Polarizer/Depolarizer; -In-Line Faraday Isolator; -Optical Circulator; -Fused WDM / Coupler; -Filter WDM / Coupler; -Fiber DWDM -Fiber Mirror; -Faraday Rotator;
Introduction: 4-hydroxyethyl piperazine ethosulfonic acid (HEPES) is an important hydrogen ion buffer, which has a good buffer ability in the pH range of 6.8 to 8.2, and can control a constant pH for a long time. Using a concentration of 10 ~ 50mmol/L, the general culture medium containing 20mmol/L 4-hydroxyethyl piperazine taurine can have a good buffer capacity, and has no toxic effect on cells. Application: HEPES (4-hydroxyethyl piperazinethesulfonic acid) is a non-ionic amphoteric buffer with high polarity, and is inert to a variety of chemical reagents and enzymes. It does not participate in and interfere with the process of biochemical reactions, and has no inhibitory effect on enzyme chemical reactions. Therefore, it can be used specifically for the research of proteins and enzymes that are highly volatile and ph-sensitive to organelles and very volatile. Buffer solution preparation: (1)hepes buffer can be directly added to the prepared culture medium according to the desired concentration, and then filtered to remove bacteria. 2.38 g HEPES was added to each 1000ml of culture medium, the pH was adjusted to 7.2 with lNNaOH after dissolution, and the bacteria were removed by filtration before use. At this time, the concentration of HEPES was 10mmol/L. (2) 100x storage solution (lmol/L) could also be prepared. Before use, 99ml culture solution was added to lml storage solution, and the final concentration was 10mmol/L. lmol/L (100x) hepes buffer was prepared as follows: 23.8gHEPES was dissolved in 90ml double distilled water, the pH was adjusted to 7.5-8.0 with lNNaOH, and then the water was fixed to 100ml, filtered to remove bacteria, divided into vials (2ml/ bottle), and stored at 4�ºC or -20�ºC. Purpose: 1.Biological buffer; Reaction buffer, prehybridization buffer and hybridization buffer for isolation and analysis of RNA nuclear fraction; For RNA with T4RNA 2.Molecular biology grade is used for RNA3' -end labeling with T4 RNA ligase 3.Cell-cell adhesion, short-term cell aggregation culture, cleaning of tissue and cell buffer
Ruik's Tap & Isolator & WDM Hybrid is a device to combine the functions of coupler, isolator and WDM device. PM Tap & Isolator & WDM Hybrid (Faraday Based) Features Applications Low Insertion Loss EDFA High Return Loss Pump Laser High Extinction Ratio Optics Cutting High Isolation Research Specifications Parameter Unit Value Stage - Single Dual Single Dual Signal Wavelength nm 1064±5 1550±15 Signal Wavelength Range nm 1020~1080 1520~1580 Max. Excess Loss, λc, at 23 2.5dB 3.5dB 1.3dB 1.4dB(Input to Output) Min. Signal Isolation, λc,±15 at 23 35dB 45dB 28dB 45dB(Output to Input) Isolation for Channels Signal Channel 30dB Pump Channel 12dB Tap Ratio 1~50% Pump Wavelength Range 980±10nm Max. Insertion Loss (Pump Channel) 0.7dB Min. Extinction Ratio at 23, only for PM Channel 20dB Min. Return Loss 50dB Max. Optical Power(CW) 300mW Max.Tensile Load 5N Operating Temperature -5~+50 Storage Temperature -40~+85 Company introduction: High power Optical Fiber Components: -Optical Fiber Isolator, up 100W; -Free Space Isolator, up to 100W; -Optical Circulator, up to 30W; -Pump Laser Protector; -Band Pass Filter; -Nx1 Pump Combiner; -Cladding Power Stripper; -Mode Field Adapter; -(N+1)x1 Pump & Signal Combiner, 200W/port; Polarization Maintaining Fiber Components: -In Line Polarizer/Depolarizer; -In Line Faraday Isolator; -Optical Circulator; -Fused WDM / Coupler; -Filter WDM / Coupler; -Fiber DWDM -Fiber Mirror; -Faraday Rotator; -Fiber Patch cord / Jumper; -PLC Splitter Module; -Tap / WDM / Isolator Hybrid; Manual Variable Optical Attenuator; -1x2 Polarization Beam Splitter / Combiner (PBS/C) -1x2 Isolator & Polarization Beam Splitter / Combiner (IPBS/C)
Ruik's Isolator & WDM Hybrid is a device to combine the functions of isolator and WDM device. PM Isolator & WDM Hybrid Features Applications Low Insertion Loss Fiber Laser High Return Loss Fiber Amplifier High Isolation Testing Equipment High Extinction Ratio High Reliability & Stability Specifications Parameter Value Stage Single Dual Single Dual Signal Channel Signal Wavelength Range 1064±10nm 1550±15nm Max. Insertion Loss 2.6dB 3.8dB 0.9dB 1.0dB Typ. Peak Signal Reversed Isolation, at 23 40dB 52dB 40dB 52dB Min. Signal Reversed Isolation, at 23 28dB 45dB 28dB 45dB Min. Isolation (Com to Pass @ Ref band Wavelength) 30dB Min. Extinction Ratio at 23 20dB Reflection Channel Wavelength Range 960~990nm Max. Insertion Loss 0.6dB Min. Isolation (Com to Ref @ Pass band Wavelength) 15dB Min. Extinction Ratio at 23 18dB Min. Return Loss 50dB Max. Insertion Loss Thermal Stability 0.005dB/ Max. Optical Power(CW) 300mW Max. Tensile Load 5N Operating Temperature -5~+70 Storage Temperature -40~+85 For device with connector, IL is 0.3dB higher, RL is 5dB lower, ER is 2dB lower. The default connector key is aligned to slow axis. Company introduction: High power Optical Fiber Components: -Optical Fiber Isolator, up to 100W; -Free Space Isolator, up to 100W; -Optical Circulator, up to 30W; -Pump Laser Protector; -Band Pass Filter; -Nx1 Pump Combiner; -Cladding Power Stripper; -Mode Field Adapter; -(N+1)x1 Pump & Signal Combiner, 200W/port; Polarization Maintaining Fiber Components: -In-Line Polarizer/Depolarizer; -In-Line Faraday Isolator; -Optical Circulator; -Fused WDM / Coupler; -Filter WDM / Coupler; -Fiber DWDM -Fiber Mirror; -Faraday Rotator; -Fiber Patchcord / Jumper; -PLC Splitter Module; -Tap / WDM / Isolator Hybrid; Manual Variable Optical Attenuator; -1x2 Polarization Beam Splitter / Combiner (PBS/C) -1x2 Isolator & Polarization Beam Splitter / Combiner (IPBS/C)
Ruik's Tap & Isolator & WDM Hybrid is a device to combine the functions of coupler, isolator and WDM device RUIK-Tech Communication is a manufacturer and supplier of Optical Passive Components with ISO9001:2015 certified. We design advanced and cost-effective passive components for various industries which include Fiber Laser, Sensing Applications, CATV, Telecommunication, Medical Systems, Gyroscope, etc. Our main products include High Power Components up to 100W (20kW), Polarization Maintaining (PM) and Single-mode Fiber Components with ranging from 780nm to 2000nm. We also provide Customized components to our customers. High power Optical Fiber Components: -Optical Fiber Isolator, up 100W; -Free Space Isolator, up to 100W; -Optical Circulator, up to 30W; -Pump Laser Protector; -Band Pass Filter; -Nx1 Pump Combiner; -Cladding Power Stripper; -Mode Field Adapter; -(N+1)x1 Pump & Signal Combiner, 200W/port; Polarization Maintaining Fiber Components: -In Line Polarizer/Depolarizer; -In Line Faraday Isolator; -Optical Circulator; -Fused WDM / Coupler; -Filter WDM / Coupler; -Fiber DWDM -Fiber Mirror; -Faraday Rotator; -Fiber Patch cord / Jumper; -PLC Splitter Module; -Tap / WDM / Isolator Hybrid; Manual Variable Optical Attenuator; -1x2 Polarization Beam Splitter / Combiner (PBS/C) -1x2 Isolator & Polarization Beam Splitter / Combiner (IPBS/C)
Ruik's Tap & Isolator & WDM Hybrid is a device to combine the functions of coupler, isolator and WDM device RUIK-Tech Communication is a manufacturer and supplier of Optical Passive Components with ISO9001:2015 certified. We design advanced and cost-effective passive components for various industries which include Fiber Laser, Sensing Applications, CATV, Telecommunication, Medical Systems, Gyroscope, etc. Our main products include High Power Components up to 100W (20kW), Polarization Maintaining (PM) and Single-mode Fiber Components with ranging from 780nm to 2000nm. We also provide Customized components to our customers. High power Optical Fiber Components: -Optical Fiber Isolator, up 100W; -Free Space Isolator, up to 100W; -Optical Circulator, up to 30W; -Pump Laser Protector; -Band Pass Filter; -Nx1 Pump Combiner; -Cladding Power Stripper; -Mode Field Adapter; -(N+1)x1 Pump & Signal Combiner, 200W/port; Polarization Maintaining Fiber Components: -In Line Polarizer/Depolarizer; -In Line Faraday Isolator; -Optical Circulator; -Fused WDM / Coupler; -Filter WDM / Coupler; -Fiber DWDM -Fiber Mirror; -Faraday Rotator; -Fiber Patch cord / Jumper; -PLC Splitter Module; -Tap / WDM / Isolator Hybrid; Manual Variable Optical Attenuator; -1x2 Polarization Beam Splitter / Combiner (PBS/C) -1x2 Isolator & Polarization Beam Splitter / Combiner (IPBS/C) Contact information; Emily Zeng Cell: +86-133 9231 5792 E-mail: emily(a)ruiktech.com Web: www.ruiktech.com
Ruik's Isolator & WDM Hybrid is a device to combine the functions of isolator and WDM device RUIK-Tech Communication is a manufacturer and supplier of Optical Passive Components with ISO9001:2015 certified. We design advanced and cost-effective passive components for various industries which include Fiber Laser, Sensing Applications, CATV, Telecommunication, Medical Systems, Gyroscope, etc. Our main products include High Power Components up to 100W (20kW), Polarization Maintaining (PM) and Single-mode Fiber Components with ranging from 780nm to 2000nm. We also provide Customized components to our customers. High power Optical Fiber Components: -Optical Fiber Isolator, up 100W; -Free Space Isolator, up to 100W; -Optical Circulator, up to 30W; -Pump Laser Protector; -Band Pass Filter; -Nx1 Pump Combiner; -Cladding Power Stripper; -Mode Field Adapter; -(N+1)x1 Pump & Signal Combiner, 200W/port; Polarization Maintaining Fiber Components: -In Line Polarizer/Depolarizer; -In Line Faraday Isolator; -Optical Circulator; -Fused WDM / Coupler; -Filter WDM / Coupler; -Fiber DWDM -Fiber Mirror; -Faraday Rotator;
Ruik's Isolator & Polarization Beam Combiner Hybrid is one type of passive component, which combine the functions of Isolator and PBS. RUIK-Tech Communication is a manufacturer and supplier of Optical Passive Components with ISO9001:2015 certified. We design advanced and cost-effective passive components for various industries which include Fiber Laser, Sensing Applications, CATV, Telecommunication, Medical Systems, Gyroscope, etc. Our main products include High Power Components up to 100W (20kW), Polarization Maintaining (PM) and Single-mode Fiber Components with ranging from 780nm to 2000nm. We also provide Customized components to our customers. High power Optical Fiber Components: -Optical Fiber Isolator, up 100W; -Free Space Isolator, up to 100W; -Optical Circulator, up to 30W; -Pump Laser Protector; -Band Pass Filter; -Nx1 Pump Combiner; -Cladding Power Stripper; -Mode Field Adapter; -(N+1)x1 Pump & Signal Combiner, 200W/port; Polarization Maintaining Fiber Components: -In Line Polarizer/Depolarizer; -In Line Faraday Isolator; -Optical Circulator; -Fused WDM / Coupler; -Filter WDM / Coupler; -Fiber DWDM -Fiber Mirror; -Faraday Rotator; -Fiber Patch cord / Jumper; -PLC Splitter Module; -Tap / WDM / Isolator Hybrid; Manual Variable Optical Attenuator; -1x2 Polarization Beam Splitter / Combiner (PBS/C) -1x2 Isolator & Polarization Beam Splitter / Combiner (IPBS/C)
Ruik's Isolator & WDM Hybrid is a device to combine the functions of isolator and WDM device. RUIK-Tech Communication is a manufacturer and supplier of Optical Passive Components with ISO9001:2015 certified. We design advanced and cost-effective passive components for various industries which include Fiber Laser, Sensing Applications, CATV, Telecommunication, Medical Systems, Gyroscope, etc. Our main products include High Power Components up to 100W (20kW), Polarization Maintaining (PM) and Single-mode Fiber Components with ranging from 780nm to 2000nm. We also provide Customized components to our customers. High power Optical Fiber Components: -Optical Fiber Isolator, up 100W; -Free Space Isolator, up to 100W; -Optical Circulator, up to 30W; -Pump Laser Protector; -Band Pass Filter; -Nx1 Pump Combiner; -Cladding Power Stripper; -Mode Field Adapter; -(N+1)x1 Pump & Signal Combiner, 200W/port; Polarization Maintaining Fiber Components: -In Line Polarizer/Depolarizer; -In Line Faraday Isolator; -Optical Circulator; -Fused WDM / Coupler; -Filter WDM / Coupler; -Fiber DWDM -Fiber Mirror; -Faraday Rotator; -Fiber Patch cord / Jumper; -PLC Splitter Module; -Tap / WDM / Isolator Hybrid; Manual Variable Optical Attenuator; -1x2 Polarization Beam Splitter / Combiner (PBS/C) -1x2 Isolator & Polarization Beam Splitter / Combiner (IPBS/C)
One-Step Adenovirus Ag Rapid Test Formats:Uncut Sheets , Bulk Package, 30Tests/Box ,OEM Specimen:Feces INTENDED USE The Adenovirus Rapid Test Device (Feces) is a rapid visual immunoassay for the qualitative presumptive detection of adenovirus in human fecal specimens. This kit is intended to be used as an aid in the diagnosis of adenovirus infection. INTRODUCTION Acute diarrheal disease in young children is a major cause of morbidity worldwide and is a leading cause of mortality in developing countries. Research has shown that enteric adenoviruses, primarily Ad40 and Ad41, are a leading cause of diarrhea in many of these children, second only to the rotaviruses. These viral pathogens have been isolated throughout the world, and can cause diarrhea in children year round. Infections are most frequently seen in children less than two years of age, but have been found in patients of all ages. Further studies indicate that adenoviruses are associated with 4-15% of all hospitalized cases of viral gastroenteritis. Rapid and accurate diagnosis of gastroenteritis due to adenovirus is helpful in establishing the etiology of gastroenteritis and related patient management. Other diagnostic techniques such as electron microscopy (EM) and nucleic acid hybridization are expensive and labor-intensive. With the self-limiting nature of adenovirus infection, such expensive and labor-intensive tests may not be necessary.
Botanical Name - Pelargonium graveolens Category - Medicinal Form - Dry Part Used - Leaves General Information - "Commonly known as Geranium, Pelargonium graveolens, is an aromatic, perennial and flowering plant which belongs to Geraniaceae family in the order of Geraniales that contains about 230 genera and more than 2500 species4. Pelargonium species probably originates from South Africa and introduced to Europe in the 17th century and have since been hybridized all over the world5. Nowadays the major production of geranium takes place in China and Middle East especially in Egypt and Morocco6. Pelargonium genus has 750 species scattered widely around the world growing as annuals. P. graveolens has been known as â??Shamdani Atriâ?? in Iran. P. graveolens is a shrubby perennial plant growing to a height of 1 m if left unpruned. In the tropical areas it is grown as an annual. The leaves are lobed and contain essential oil. The plant has typical small, pink flowers. Leaves and stalks are the essential parts of this plant. The essential oil is extracted from fresh plant material mainly using steam distillation. P. graveolens essential oil is largely utilized in the perfumery, cosmetic and aromatherapy industries all over the world. It has since become indispensable aromatherapy oil. Geranium oil responds well to the balancing effects of constipation, insomnia, restlessness, nervousness, anxiety, worry, high blood pressure, anger, frustration, emotional upsets, hypercholesterolemia, slow to lose weight and low metabolic forces. " Phytochemicals - "Many chemical constituents such as volatile substances, terpenoids, flavonoids, phenolics, coumarins, cinnamic acids and tannins have been isolated from the plant. Citronellol (29.90%), trans-geraniol (18.03%), 10-epi-�³- eudesmol (8.27%), isomenthone (5.44%), linalool (5.13%), geranyl acetate (4.52%), �³- Cadinene (2.89%), geranyl butyrate (2.53%), geranyltiglate (2.50%) and gemacrene D (2.05%) were identified as the major constituents of the P. graveolens aerial parts essential oil. Phytochemical investigations in 1996 resulted in characterization of the indole alkaloids, elaeocarpidine, and its 20-H isomer epielaeocarpidine in the leaves of geranium. "