Cas 9003-01-4 Properties: Paa(polyacrylic acid) is innoxious and soluble in water, it can be used in situations of alkaline and high concentration without scale sediment. Paa(polyacrylic acid) can disperse the microcrystals or microsand of calcium carbonate, calcium phosphate and calcium sulfate. Paa(polyacrylic acid) is used as scale inhibitor and dispersant for circulating cool water system, papermaking, weave, dyeing, ceramic, painting, etc. Specification: Appearance Colorless or light yellow transparent liquid Solid content % 30 min Free monomer (ch2=ch-cooh) % 0.5 max Density (20 centigrade)g/cm3 1.09 min Ph(1% solution) 3.0 max 40%, 50% paa(polyacrylic acid) are also supplied. Usage: Paa(polyacrylic acid) can be used as scale inhibitor and dispersant in circulating cool water systems in power plants, iron & steel factories, chemical fertilizer plants, refineries and air conditioning systems. Dosage should be in accordance with water quality and equipment materials. When used alone, 1-15mg/l is preferred. Package and storage: Normally in 200kg net plastic drum, ibc drum can also be used as required. Storage for one year in room shady and dry place.
CAS 9003-04-7 Properties: PAAS(Polyacrylic Acid Sodium) is innoxious and soluble in water, it can be used in situations of alkaline and high concentration without scale sediment. PAAS(Polyacrylic Acid Sodium) can disperse the microcrystals or microsand of calcium carbonate, calcium phosphate and calcium sulfate. PAAS(Polyacrylic Acid Sodium) is used as scale inhibition and dispersant for circulating cool water system, papermaking, weave, dyeing, ceramic, painting, etc. Specification: Appearance Colorless or light yellow transparent liquid Solid content % 30 min Free monomer (CH2=CH-COOH) % 0.5 max Density (20 centigrade)g/cm3 1.15 min pH(1% solution) 6.0~8.0 Notes: Solid content 40%, 45% and 50% are also available. Usage: PAAS(Polyacrylic Acid Sodium) can be used as scale inhibitor and dispersant in circulating cool water systems in power plants, iron & steel factories, chemical fertilizer plants, refineries and air conditioning systems. Dosage should be in accordance with water quality and equipment materials. When used alone, 2-15mg/L is preferred. When used as dispersant, the dosage should be determined by experiment. Package and Storage: 25kg or 200kg in plastic barrel. Storage for ten months in room shady and dry place.
Polyacrylic acid (paa) Cas 9003-01-4 Properties: Paa is innoxious and soluble in water, it can be used in situations of alkaline and high concentration without scale sediment. Paa can disperse the microcrystals or microsand of calcium carbonate, calcium phosphate and calcium sulfate. Paa is used as scale inhibitor and dispersant for circulating cool water system, papermaking, weave, dyeing, ceramic, painting, etc. 40%, 50% paa are also supplied. Usage: Paa can be used as scale inhibitor and dispersant in circulating cool water systems in power plants, iron & steel factories, chemical fertilizer plants, refineries and air conditioning systems. Dosage should be in accordance with water quality and equipment materials. When used alone, 1-15mg/l is preferred. Package and storage: Normally in 200kg net plastic drum, ibc drum can also be used as required. Storage for one year in room shady and dry place.
PAAS can disperse the microcrystals or microsand of calcium carbonate, calcium phosphate and calcium sulfate. PAAS is used as scale inhibition and dispersant for circulating cool water system, papermaking, weave, dyeing, ceramic, painting, etc. Specification: Appearance: colorless or light yellow transparent liquid Solid content : 30 % min Free monomer (CH2=CH-COOH): 0.5% max Density (20 cnetigrade): 1.15 g/cm3 min pH(1% solution): 6.0~8.0 Notes: Solid content 40%, 45% and 50% are also available Usage: PAAS can be used as scale inhibitor and dispersant in circulating cool water systems in power plants, iron & steel factories, chemical fertilizer plants, refineries and air conditioning systems. Dosage should be in accordance with water quality and equipment materials. When used alone, 2-15mg/L is preferred. When used as dispersant, the dosage should be determined by experiment. 25kg or 200kg in plastic barrel. Storage for ten months in room shady and dry place.
Appearance: Colorless or light yellow transparent liquid Solid content % : 30 min Free monomer (CH2=CH-COOH) % :0.5 max Density (20íµ)g/cm3: 1.09 min pH(1% solution) :3.0 max 40%, 50% PAA are also supplied. Normally In 200kg net Plastic Drum, IBC drum can also be used as required
Cas 9003-01-4 Properties: Polyacrylic acid (paa) is innoxious and soluble in water, it can be used in situations of alkaline and high concentration without scale sediment. Paa can disperse the microcrystals or microsand of calcium carbonate, calcium phosphate and calcium sulfate. Paa is used as scale inhibitor and dispersant for circulating cool water system, papermaking, weave, dyeing, ceramic, painting, etc. Specification: Items index Appearance colorless or light yellow transparent liquid Solid content % 30 min Free monomer (ch2=ch-cooh) % 0.5 max Density (20¦)g/cm3 1.09 min Ph(1% solution) 3.0 max 40%, 50% paa are also supplied. Usage: Paa can be used as scale inhibitor and dispersant in circulating cool water systems in power plants, iron & steel factories, chemical fertilizer plants, refineries and air conditioning systems. Dosage should be in accordance with water quality and equipment materials. When used alone, 1-15mg/l is preferred. Normally in 200kg net plastic drum, ibc drum can also be used as required.
Polyacrylic acid (paa) Cas: 9003-01-4 Properties: Paa is innoxious and soluble in water, it can be used in situations of alkaline and high concentration without scale sediment. Paa can disperse the microcrystals or microsand of calcium carbonate, calcium phosphate and calcium sulfate. Paa is used as scale inhibitor and dispersant for circulating cool water system, papermaking, weave, dyeing, ceramic, painting, etc. Usage: Paa can be used as scale inhibitor and dispersant in circulating cool water systems in power plants, iron & steel factories, chemical fertilizer plants, refineries and air conditioning systems. Dosage should be in accordance with water quality and equipment materials. When used alone, 1-15mg/l is preferred. Keywords: paa Related products: polyacrylic acid (paa) Polyacrylic acid sodium (paas) Polyhydric alcohol phosphate ester (pape) Package and storage: Normally in 200kg net plastic drum, ibc drum can also be used as required. Storage for one year in room shady and dry place.
CAS No.: 9003-01-4 Properties: PAA is innoxious and soluble in water, it can be used in situations of alkaline and high concentration without scale sediment. PAA can disperse the microcrystals or microsand of calcium carbonate, calcium phosphate and calcium sulfate. PAA is used as scale inhibitor and dispersant for circulating cool water system, papermaking, weave, dyeing, ceramic, painting, etc. Specification: Appearance: Amber transparent liquid; Solid content %: 50 min Usage: PAA can be used as scale inhibitor and dispersant in circulating cool water systems in power plants, iron & steel factories, chemical fertilizer plants, refineries and air conditioning systems. Dosage should be in accordance with water quality and equipment materials. When used alone, 1-15mg/L is preferred.
Polyacrylic Acid Sodium (PAAS) CAS 9003-04-7 Properties: PAAS is innoxious and soluble in water, it can be used in situations of alkaline and high concentration without scale sediment. PAAS can disperse the microcrystals or microsand of calcium carbonate, calcium phosphate and calcium sulfate. PAAS is used as scale inhibition and dispersant for circulating cool water system, papermaking, weave, dyeing, ceramic, painting, etc. Notes: Solid content 40%, 45% and 50% are also available Usage: PAAS can be used as scale inhibitor and dispersant in circulating cool water systems in power plants, iron & steel factories, chemical fertilizer plants, refineries and air conditioning systems. Dosage should be in accordance with water quality and equipment materials. When used alone, 2-15mg/L is preferred. When used as dispersant, the dosage should be determined by experiment. Package and Storage: 25kg or 200kg in plastic barrel. Storage for ten months in room shady and dry place.
PAAS can disperse the microcrystals or microsand of calcium carbonate, calcium phosphate and calcium sulfate. PAAS is used as scale inhibition and dispersant for circulating cool water system, papermaking, weave, dyeing, ceramic, painting, etc. Specification: Appearance: colorless or light yellow transparent liquid Solid content : 30 % min Free monomer (CH2=CH-COOH): 0.5% max Density (20 centigrade): 1.15 g/cm3 min pH(1% solution): 6.0~8.0 Notes: Solid content 40%, 45% and 50% are also available Usage: PAAS can be used as scale inhibitor and dispersant in circulating cool water systems in power plants, iron & steel factories, chemical fertilizer plants, refineries and air conditioning systems. Dosage should be in accordance with water quality and equipment materials. When used alone, 2-15mg/L is preferred. When used as dispersant, the dosage should be determined by experiment. 25kg or 200kg in plastic barrel. Storage for ten months in room shady and dry place.
Properties: PAAS is innoxious and soluble in water, it can be used in situations of alkaline and high concentration without scale sediment. PAAS can disperse the microcrystals or microsand of calcium carbonate, calcium phosphate and calcium sulfate. PAAS is used as scale inhibition and dispersant for circulating cool water system, papermaking, weave, dyeing, ceramic, painting, etc. Specification: items& index Appearance Colorless or light yellow transparent liquid Solid content %: 30 min Free monomer (CH2=CH-COOH) %: 0.5 max Density (20íµ)g/cm3: 1.15 min pH(1% solution): 6.0~8.0 Notes: Solid content 40%, 45% and 50% are also available Usage: PAAS can be used as scale inhibitor and dispersant in circulating cool water systems in power plants, iron & steel factories, chemical fertilizer plants, refineries and air conditioning systems. Dosage should be in accordance with water quality and equipment materials. When used alone, 2-15mg/L is preferred. When used as dispersant, the dosage should be determined by experiment. 25kg or 200kg in plastic barrel
Appearance: Colorless or light yellow transparent liquid Solid content % :30 min Free monomer (CH2=CH-COOH) % :0.5 max Density (20íµ)g/cm3 :1.15 min pH(1% solution) :6.0~8.0 25kg or 200kg in plastic barrel
Polyacrylic acid (paa) Cas 9003-01-4 Properties of paa: Paa is innoxious and soluble in water, paa can be used in situations of alkaline and high concentration without scale sediment. Paa can disperse the microcrystals or microsand of calcium carbonate, calcium phosphate and calcium sulfate. Paa is used as scale inhibitor and dispersant for circulating cool water system, papermaking, weave, dyeing, ceramic, painting, etc. Specification of paa: Appearancecolorless or light yellow transparent liquid Solid content %30 min Free monomer (ch2=ch-cooh) %0.5 max Density (20c)g/cm31.09 min Ph(1% solution)3.0 max 40%, 50% paa are also supplied. Usage of paa: Paa can be used as scale inhibitor and dispersant in circulating cool water systems in power plants, iron & steel factories, chemical fertilizer plants, refineries and air conditioning systems. Dosage should be in accordance with water quality and equipment materials. When used alone, 1-15mg/l is preferred. Package and storage of paa: Normally in 200kg net plastic drum, ibc drum can also be used as required. Storage for one year in room shady and dry place. Keywords: paa Related products: polyacrylic acid (paa) Polyacrylic acid sodium (paas) Polyhydric alcohol phosphate ester (pape) Paa, paas, pape, polyacrylic acid, polyacrylic acid sodium, polyhydric alcohol phosphate ester Normally in 200kg net plastic drum, ibc drum can also be used as required. Storage for one year in room shady and dry place.
Stearic Acid CAS No.: 57-11-4 Chemical Formula: C18H36O2 CH3(CH2)16COOH Molecular Weight: 284.48 Properties: Pure product is small pieces of wax crystals in white with slightly luster Application: Mainly used in producing stearate; Sodium stearate; Magnesium stearate; Calcium stearate; Lead stearate; Aluminum stearate; Cadmium stearate; Ferric stearate; Potassium stearate. Also widely used in the raw materials such as plastic cold plasticizer; Stabilizer; Surfactant; Stripping punishment; Rubber vulcanization accelerator; Medical relief agent, polishing paste, metal mineral flotation agent, high melting point grease, waterproofing agents and the production of cosmetics cream. Besides, also be used as oil-soluble paint solvents, crayons transfer lubricant, wax Polish, stearic acid glyceride emulsifier, etc.
- Free Fatty Acid : 69.29% - Iodine Value (Wijs) : 10.10 - Moisture and Impurity : 0.98% - Saponification Value : 250.60 - Total Fatty Matter : 95 .83 Packing New drum 180kg/drums
PFAD Is a by-product from refining Crude Palm Oil. It is a light brown solid at room temperature, melting to a brown liquid on heating. Palm Fatty Acid Distillate is used in soap industries, animal feed industries and as raw materials for oleochemical industries. Vitamin E can be extracted from PFAD. Specifications: Free Fatty Acids (as palmitic) 70% min Moisture & Impurities 1.0% max Saponifiable Matter 95% min(basis 97%)
Stearic Acid CAS No.: 57-11-4 Chemical Formula: C18H36O2 CH3(CH2)16COOH Molecular Weight: 284.48 Properties: Pure product is small pieces of wax crystals in white with slightly luster Application: Mainly used in producing stearate; Sodium stearate; Magnesium stearate; Calcium stearate; Lead stearate; Aluminum stearate; Cadmium stearate; Ferric stearate; Potassium stearate. Also widely used in the raw materials such as plastic cold plasticizer; Stabilizer; Surfactant; Stripping punishment; Rubber vulcanization accelerator; Medical relief agent, polishing paste, metal mineral flotation agent, high melting point grease, waterproofing agents and the production of cosmetics cream. Besides, also be used as oil-soluble paint solvents, crayons transfer lubricant, wax Polish, stearic acid glyceride emulsifier, etc.
We are supplier and exporter of Hydrochloric Acid. Hydrochloric acid is a strong inorganic acid that is used in many industrial processes such as refining metal, vinyl chloride mfg , leather processing etc... Hydrochloric Acid: U.N.NO 1789.Chemical Formula HCL Packing : 40 Kgs HDPE Jars or 250 Kgs HDPE Drums. Physical Property : Clear water white liquid having Sp.Gr.at 25oc - 1.14 to l.16 Chemical Property : Acidity as HCL 30-32% Sulphate as H2SO4 not more than 0.1% Iron as (FE) 0.002 to 0.003%
We deals in the following products :- 1) Hydrochloric Acid 2) DOP
PFAD Is a by-product from refining Crude Palm Oil. It is a light brown solid at room temperature, melting to a brown liquid on heating. Palm Fatty Acid Distillate is used in soap industries, animal feed industries and as raw materials for oleochemical industries. Vitamin E can be extracted from PFAD. Specifications: Free Fatty Acids (as palmitic) 70% min Moisture & Impurities 1.0% max Saponifiable Matter 95% min(basis 97%)
