Properties of ATMP.Na4:
ATMP.Na4 is the salt of ATMP, it can inhibit the scale formation, calcium carbonate in particular, in water system. ATMP.Na4 can be used in circulating cool system in power plant, oil refinery plant and oilfield refill water system. ATMP.Na4 has good synergistic effects with other additives, in neutral to acidic condition, no ammonia smell is let off.
Specification of ATMP.Na4:
Appearance Colorless or light yellow transparent liquid
Active content (ATMP)% 29.4-32.4
Active content (ATMP.Na4) % 38.0-42.0
PH (1% water solution) 6.5-7.5
Fe(Fe3+)ppm 35 max
Density (20C) g/cm3 1.35-1.45
Package and Storage of ATMP.Na4:
Normally In 250kg net Plastic Drum, IBC drum can also be used as required. Storage for ten months in room shady and dry place.
Properties of ATMP.Na5:
ATMP.Na5 is the salt of ATMP, it can inhibit calcium carbonate particularly in water treatment system . ATMP.Na5 can be used in circulating cool system in power plant, oil refinery plant and oilfield refill water system . ATMP.Na5 is a general low cost scale inhibitor, it has good corrosion inhibition to zinc salt and phosphate, its chelating ability is good as well.
Specification of ATMP.Na5:
Appearance Colorless or light yellow transparent liquid
Active content (ATMP)% 27.8-30.7
Active content (ATMP.Na5) % 38.0-42.0
Total phosphoric acid(PO43-) % 26.6-28.6
Chloride (Cl-) % 1.0 max
PH (1% water solution) 10.0-11.0
Fe·+Fe3+·¼ppm 20 max
Density (20 C) g/cm3 1.38-1.48
Usage of ATMP.Na5:
ATMP.Na5 is used together with other organophosphonic acid, polycarboxylic acid or salt to form organic alkaline agents. ATMP.Na5can be used in circulating cool water system for all water quality.
Polyacrylic acid (paa)
Cas 9003-01-4
Properties:
Paa is innoxious and soluble in water, it can be used in situations of alkaline and high concentration without scale sediment. Paa can disperse the microcrystals or microsand of calcium carbonate, calcium phosphate and calcium sulfate. Paa is used as scale inhibitor and dispersant for circulating cool water system, papermaking, weave, dyeing, ceramic, painting, etc.
40%, 50% paa are also supplied.
Usage:
Paa can be used as scale inhibitor and dispersant in circulating cool water systems in power plants, iron & steel factories, chemical fertilizer plants, refineries and air conditioning systems. Dosage should be in accordance with water quality and equipment materials. When used alone, 1-15mg/l is preferred.
Package and storage:
Normally in 200kg net plastic drum, ibc drum can also be used as required. Storage for one year in room shady and dry place.
Polyacrylic Acid Sodium (PAAS)
CAS 9003-04-7
Properties:
PAAS is innoxious and soluble in water, it can be used in situations of alkaline and high concentration without scale sediment. PAAS can disperse the microcrystals or microsand of calcium carbonate, calcium phosphate and calcium sulfate. PAAS is used as scale inhibition and dispersant for circulating cool water system, papermaking, weave, dyeing, ceramic, painting, etc.
Notes: Solid content 40%, 45% and 50% are also available
Usage:
PAAS can be used as scale inhibitor and dispersant in circulating cool water systems in power plants, iron & steel factories, chemical fertilizer plants, refineries and air conditioning systems. Dosage should be in accordance with water quality and equipment materials. When used alone, 2-15mg/L is preferred. When used as dispersant, the dosage should be determined by experiment.
Package and Storage:
25kg or 200kg in plastic barrel. Storage for ten months in room shady and dry place.
Properties of ATMP:
ATMP has excellent chelation, low threshold inhibition and lattice distortion ability. It can prevent scale formation, calcium carbonate in particular, in water system. ATMP has good chemical stability and is hard to be hydrolyzed in water system. At high concentration, it has good corrosion inhibition.
ATMP is used in industrial circulating cool water system and oilfield water pipeline in fields of thermal power plant and oil refinery plant. ATMP can decrease scale formation and inhibit corrosion of metal equipment and pipeline. ATMP can be used as chelating agent in woven and dyeing industries and as metal surface treatment agent.
The solid state of ATMP is crystal powder, soluble in water, easily deliquescence, suitable for usage in winter and freezing districts. Because of its high purity, it can be used in woven & dyeing industries and as metal surface treatment agent.
Specification of ATMP:
Appearance
colorless or light yellow transparent liquid
White crystal powder
Active acid % 48.0-52.0 95min
Chloride (as Cl-)% 2.0(or1.0) min 1.0 min
pH value (1%solution) 2.0 max 2.0 max
Fe (as Fe3+) (ppm) 20 20
Density (20C)g/cm3 1.33 min -
Colour APHA (Hazen) 40 max -
Package and Storage of ATMP:
ATMP liquid: Normally In 250kg net Plastic Drum, IBC drum can also be used as required ATMP solid: 25kg inner liner polyethylene (PE) bag, outer plastic woven bag, or confirmed by clients.
Storage for ten months in room shady and dry place.
Product Name: 2-Phosphonobutane -1,2,4-Tricarboxylic Acid(PBTCA) 50%
Synonyms : PBTCA 50%
M.F.: C7H11O9PCAS No.: 37971-36-1
Performance
Water Treatment chemical PBTCA, a good corrosion inhibitors, is widely used in circulating cool water system and oilfield water injection system antifouling treatment.
Water Treatment chemical PBTCA is used as a corrosion inhibitor for industrial water treatment. This product has excellent complexing ability with Ca2 +, Zn2 +, Cu2 +, Mg2 +.
The suitable PH range is from 7.0 to 9.5. It can operate at high temperature, high hardness, and high alkalinity conditions.
It allows coolingwater concentration factor increased to seven or more.
