Medical Meltblown. Made in - Ukraine; Density - 25 gm2 Roll Width - 175mm Roll length - from 1000m BFE - 98-99% PFE - 98-99% It is possible to make a density of 25 to 50 gm2, a width of 50 to 1000 mm. Certificates of quality and compliance with European standards. Abifarm is a national Ukrainian manufacturer of nonwoven materials.
Worsted and carded fabrics, covers, plaids.
Recycled polyester staple fiber, nonwoven materials.
Spunbond-nonwoven-fabric.
Rose hips (lat. Hip rose, fruit) can be used in many different variations. First of all, rosehip is a powerful bactericidal, anti-inflammatory and phytoncidal agent. Thanks to the record content of vitamin C, it gives a boost of immunity and increases the body's resistance to viruses and infections. The picking season is from September to November. Workers pick the berries by hand as they ripen. Raw material is delivered to the company, where it is dried in a heated, temperature-controlled room. Then, berries are cleaned of peduncles and twigs, leaves, defects and unripe berries. - Wild plants. - Humidity (9% -10%). - Maximum amount - Purification method: color-sorting machine - Packaging (weight 25 kg) - Production capacity - from 100000 tons
From rowan berries are prepared healing infusions, drinks, teas, jams, jellies, juices. The rowan berries grow wild in ecologically clean regions of Ukraine. They are harvested in the forests, on the hills. The rowan berries turn red as early as August, but they are usually picked in October after the first frosts. Raw material is delivered to our company, where it is dried in a thermostatically controlled room. After that, the fruits are cleaned of peduncles and twigs, leaves, and unripe berries. - Wild plants - Natural drying - Humidity (9%-11%) - Maximum amount of green up to 0,1%. - Cleaning method: color-sorting machine - Packaging (weight 25 kg)
Hawthorn berries contain antioxidants, therefore, they help improve blood circulation, regulate the contraction of the heart muscle and help cleanse blood vessels. Ursulic acid has a cardiostimulating effect and dilates blood vessels. Therefore, most often hawthorn berries are used to treat: angina pectoris; hypertension; arrhythmias; myocardial infarction. The biologically active substances that make up the hawthorn fruit have a calming effect, positively affecting the nervous system. Hawthorn berries are harvested during their full ripening from August to the end of October. Ripe berries are collected in bags or baskets, cutting off the whole inflorescence with berries or berries separately. The raw material is taken to a rockery where it is dried in a heated, temperature-controlled room. The berries are then cleaned of stalks and twigs, leaves, pips, defects, and unripe berries. * Wild-growing plants * Max drying temperature 50 degrees C * Humidity 8-9% * Purification method: color-sorting machine * Packaging weight 25 kg OR on request * Production capacity from 20 tons per season * High nutrient content from the south of Ukraine The price may vary depending on the volume and season. Ecologically clean Odessa region in Ukraine allows us to collect wild plants with a high content of nutrients. At your request, we will provide a photo and any information about a particular batch. Fito-Export, medicinal herbs supply partner for your business.
Rosehips (lat. Rosa Canina) are especially rich in vitamin C, it gives a boost of immunity and increases the body's resistance to viruses and infections. It is a powerful bactericidal, anti-inflammatory and phytoncidal agent. Season of picking is from September to November. White-flowered and red-flowered species of wild rose, which we collect in the Odessa region of Ukraine, are one of the record holders for the content of vitamin C. Rosehips are also contain carotenoids, beta-carotene, lutein, zeaxanthin, andlycopene. Rosehip products help to strengthen immune system, improve skin, reduce arthritis pain. Workers carefully hand pick berries fully ripen. Raw material product is taken to our facility where it gets cleaned with water and dried in a temperature-controlled heating room. Then berries are cleaned of peduncles and twigs, leaves, defects and unripe berries. Each batch get tested and receives a quality certificate. * Wild plants * Max drying temperature 50 degrees C * Humidity (9% -10%). * Purification method: color-sorting machine * Packaging weight 25 kg OR on request * Production capacity from 100000 tons per season * High nutrient content from the south of Ukraine The price may vary depending on the volume and season. Ecologically clean Odessa region in Ukraine allows us to collect wild plants with a high content of nutrients. At your request, we will provide a photo and any information about a particular batch. Fito-Export, medicinal herbs supply partner for your business.
Other names for wild garlic: cowleekes, cows's leek, cowleek, buckrams, broad-leaved garlic, wood garlic, bear leek, Eurasian wild garlic, bear's garlic or bear's onion. Leaves, stems and bulbs have a strong garlic smell due to the content of alliin glycoside and essential oil. The plant has a lot of ascorbic acid, in the leaves up to 0.73% Bear onion increases appetite, increases the secretion of digestive glands, enhances the motor function of the intestine. In addition, the plant has a bactericidal, antihelminthic, fungicidal and antiscorbutic effect. Ramson prevents the accumulation of cholesterol in the blood, stimulates cardiac activity, lowers blood pressure and contributes to the normalization of metabolism. Ecologically clean Odessa region in Ukraine allows us to collect wild plants with a high content of nutrients. At your request, we will provide a photo and any information about a particular batch. Fito-Export, medicinal herbs supply partner for your business.
In scientific medicine, Motherwort is used as a sedative similar to valerian preparations, as well as an effective remedy for the treatment and prevention of cardiovascular diseases. Motherwort is also used to treat epilepsy, Graves' disease, thrombosis, gastrointestinal diseases, menstrual irregularities, neuroses, arterial hypertension and other diseases. Motherwort has a beneficial effect on carbohydrate and fat metabolism, reduces the level of glucose, lactic and pyruvic acids, cholesterol, total lipids in the blood, and normalizes protein metabolism. The price may vary depending on the volume and season. Ecologically clean Odessa region in Ukraine allows us to collect wild plants with a high content of nutrients. At your request, we will provide a photo and any information about a particular batch. Fito-Export, medicinal herbs supply partner for your business.
Wild black elderberry from the Odessa region of Ukraine with the maximum amount of useful substances in comparison with other regions and organized cultivation. Elderberries contain vitamins C and E, carotene, essential oils, glucose and fructose, tannins, salibutsin, chrysanthemum, various amino acids. Black elderberry are widely used in pharmaceuticals to create drugs for the treatment of diabetes mellitus, hepatitis, gastric and duodenal ulcers. In food industry black elderberry is for pies, jellies, jams, ice cream, yogurt and alcoholic beverages. In folk medicine it has been used for centuries as a medicinal plant because anthocyanins are known phytochemicals that are good for human health. Elderberry harvesting season usually lasts from mid-August to mid-September, depending on the region and variety. The harvesting climate in the south of Ukraine preserves all the useful properties of elderberries Elderberries are harvested fully ripe. Drying takes place on modern drying equipment under the supervision of specialists with the maximum heating temperature of 50 C. Next, elderberries are triple-cleaned. We offer black elderberries in two forms: whole berry and crushed into powder. The price may vary depending on the volume and season. We will provide any additional information upon your request. Fito-Export, medicinal plant supply partner for your business. Contact: Sergey Chekhovsky * Wild plants * Quality 99.9% purity * Max amount of green as low as 0.1% * Purification method: color-sorting machine * Max drying temperature 50 C * Humidity 10% - 12% * Packaging weight 25 kg OR on request * Production capacity 50 tons per season * High nutrient content from the south of Ukraine
Sunflower oil , wood pellets , hardwood charcoal , firewood , briquettes , canola oil , corn oil , pallets , wood lumber , double a4 copy , rice , copper wire scrap , milk powder , corn , urea.
Soya bean, soybeans, soybeans meal, canola oil, sunflower oil, corn, maize, pork , chicken meat, chicken eggs, frozen beef meat, ethanol, raw sugar, wood pulp, sulfate chemical, rennet casein.Exporter
Appearance: White granules identical in shape without tails. Caking is not allowed. MFI at 21.6kg 8-12/7-13 density 0.946-0.953 depending on grade standards ash 0.04-0.1 depending on grade standards purity 85-90 tensile strength at yield 18-20 tensile strength at break 25-30 ultimate elongation 450-550 elasticity 750-920 environmental stress-cracking resistance 500
D6 is also be known as Residual Fuel Oil and is of high-viscosity. This particular fuel oil requires preheating to 220 - 260 Degrees Fahrenheit. D6 is mostly used for generators. D6 is a type of residual fuel, mainly used in power plants and larger ships. The fuel requires to be preheated before it can be used. It is not possible to use it in smaller engines or vessels/vehicles where it is not possible to pre-heat it. D6 is its name in the USA. In other parts of the world it has other names. Residual means the material remaining after the more valuable cuts of crude oil have boiled off. The residue may contain various undesirable impurities including 2 percent water and one-half percent mineral soil. D6 fuel is also known as residual fuel oil (RFO), by the Navy specification of Bunker C, or by the Pacific Specification of PS-400 Recent changes in fuel quality regulation now require further refining of the D6 in order to remove the sulfur, which leads to a higher cost. Despite this recent change, D6 is still less useful because of its viscosity as well as that it needs to be pre-heated before it can be used and contains high amounts of pollutants, such as sulfur. Since it requires pre-heating, it cannot be used in small ships or boats or cars. However large ships and power plants can use the residual fuel oil. The price of D6 diesel traditionally rises during colder months as demand for heating oil rises, which is refined in much the same way.In many parts of the United States and throughout the United Kingdom and Australia, d6 diesel may be priced higher than petrol. D6 Diesel Standards and ClassificationCCAI and CII are two indexes which describe the ignition quality of residual fuel oil, and CCAI is especially often calculated for marine fuels.
Uses of base oil sn500 Base oil sn500 use in manufacturing of many lubricants oil , who produce base oil mostly use sn500 as additive in their other product also blenders and compounders are other user of base oil different grades as well as sn500 , mostly base oil add from 1% up to 20% as additive to other products . base oil use in different oil as well is engine oil , motor oil , hydraulic oil , gear oil etc.
Russian Mazut M100 is a fuel oil that is manufactured to GOST specifications, GOST 10585-75 (not active), GOST 10585-99 Oil fuel (GOST is the Russian system of standards, much like ASTM, for example). Mazut is almost exclusively manufactured in the Russian Federation, This kind of oil is graded as the heavy furnace oil. The product is produced from the remains of raw oil processing. This kind of mazut is produced only from the low sulphur raw oil. This product is typically used for larger boilers in producing steam since the BTU content is high. The most important consideration (not the only consideration) when grading this fuel is the sulfur content, which can mostly be affected by the source feedstock. For shipment purposes, this product is considered a dirty oil product, and because viscosity drastically affect whether it is able to be pumped, shipping has unique requirements. Mazut is much like Number 6 Oil, and is part of the products left over after gasoline and lighter components are evaporated from the crude oil. The main difference between the different types of Mazut-100 is the content of sulphur. The grades are represented by these sulfuric levels: Very Low Sulphur is Mazut M100 with a Sulphur content of 0.5% Low Sulphur is Mazut M100 with a Sulphur content of 0.5% Normal Sulphur is a Mazut M100 with a Sulphur content of 1.0-2.0% High Sulphur is a Mazut M100 with a Sulphur content of 2.0-3.5% The amount of sulfur affects how clean the oil burns, and in turn the emissions it creates, as well as the amount of buildup that accumulates within the engines and furnaces that burns it. M100 prices are often determined by its point of origin and mode of production. Apart from shipping charges and regulations, product quality is considered to be more essential. When petroleum is distilled, fuel oil is produced as a residue or distillate. Any fuel oil is a form of petroleum that is burned to produce energy or heat for running an engine. These are usually low-quality oils that are heated in a furnace or boiler and used in a number of industries. MAZUT is such fuel and is typically used in generating plants and factories. Of course, different plants have expected requirements and specifications of their fuel and this is why MAZUT M100/99 and GOST 10585-75 are produced according to industry ISO standards.
Russian Mazut M100 is a fuel oil that is manufactured to GOST specifications, GOST 10585-75 (not active), GOST 10585-99 Oil fuel (GOST is the Russian system of standards, much like ASTM, for example). Mazut is almost exclusively manufactured in the Russian Federation, This kind of oil is graded as the heavy furnace oil. The product is produced from the remains of raw oil processing. This kind of mazut is produced only from the low sulphur raw oil. This product is typically used for larger boilers in producing steam since the BTU content is high. The most important consideration (not the only consideration) when grading this fuel is the sulfur content, which can mostly be affected by the source feedstock. For shipment purposes, this product is considered a product, and because viscosity drastically affect whether it is able to be pumped, shipping has unique requirements. Mazut is much like Number 6 Oil, and is part of the products left over after gasoline and lighter components are evaporated from the crude oil. The main difference between the different types of Mazut-100 is the content of sulphur. The grades are represented by these sulfuric levels: Very Low Sulphur is Mazut M100 with a Sulphur content of 0.5% Low Sulphur is Mazut M100 with a Sulphur content of 0.5% Normal Sulphur is a Mazut M100 with a Sulphur content of 1.0-2.0% High Sulphur is a Mazut M100 with a Sulphur content of 2.0-3.5% The amount of sulfur affects how clean the oil burns, and in turn the emissions it creates, as well as the amount of buildup that accumulates within the engines and furnaces that burns it. M100 prices are often determined by its point of origin and mode of production. Apart from shipping charges and regulations, product quality is considered to be more essential. When petroleum is distilled, fuel oil is produced as a residue or distillate. Any fuel oil is a form of petroleum that is burned to produce energy or heat for running an engine. These are usually low-quality oils that are heated in a furnace or boiler and used in a number of industries. MAZUT is such fuel and is typically used in generating plants and factories. Of course, different plants have expected requirements and specifications of their fuel and this is why MAZUT M100/99 and GOST 10585-75 are produced according to industry ISO standards.
Modern mineral base oils are the result of a long and complex distillation and refining processes. The feedstock used is crude oil. This substance is not of uniform quality but consists of several thousands of hydrocarbon compounds in which the elements carbon and hydrogen are present in all molecules and, in part, are bound to other elements. The hydrocarbons can be divided into three main groups: paraffinic, naphthenic and aromatic. Paraffinic hydrocarbons can be further divided into two subgroups: normal paraffinic and iso- paraffinic. Paraffinic hydrocarbons are the best lubricants. The distillation process in the refinery separates the hydrocarbons contained in the crude into cuts based on the molecule size. Furthermore, as many unwanted substances as possible are removed in the process, such as sulphur, aromatic hydrocarbons, paraffin wax, etc. In other words the mineral oil production process is physical cleaning and the end product is so-called paraffinic base oil. Most of the hydrocarbons in the base oil are paraffinic, but it also contains naphthenic and aromatic molecules. When the finished lubricant, such as motor oil, is made of these, several additive compounds are used to improve the base oil properties. The final outcome can also be so-called naphthenic base oil, where most of the hydrocarbons are naphthenic. Their cold properties are excellent.
Bitumen a black viscous mixture of hydrocarbons obtained naturally or as a residue from petroleum distillation. It is used for road surfacing and roofing. Bitumen is a mixture of Organic Liquids that are highly Viscous, Black, Sticky, Entirely Soluble in Carbon Disulfide, and composed primarily of highly condensed Polycyclic Aromatic Hydrocarbons. Naturally occurring or crude bitumen is a sticky, tar-like form of petroleum which is so thick and heavy that it must be heated or diluted before it will flow. At room temperature, it is much like cold molasses. Refined Bitumen is the residual (bottom) fraction obtained by fractional distillation of crude oil. It is the heaviest fraction and the one with the highest boiling point, boiling at 525 C (977 F). Petroalliance are involved in import and the supply and trade of Bitumen Oil. This oil is a dark and viscous liquid which is sticky in texture. It is widely used in road construction, waterproofing, paints, enamels etc. It is available to clients in different types of settings at highly affordable prices. It is widely acclaimed amongst our client base for its supreme quality. Uses of Bitumens Bitumen is primarily used for construction and paving of roads. Its other uses are for Bituminous Waterproofing Products, including the use of bitumen in the production of roofing felt and for sealing flat roofs.