Oilfield Wellhead Manual Plug Valve Suppliers and Manufacturers

Industrial Valve Like: Ball Valve, Gate Valve, Globe Valve, Check Valve, Butterfly Valve, Sluice Valve, Air Valve, Plug Valve as per Engineering Standard

Apple washing peeling remove seeds half cutting in-one-machine, also can process pear and other same fruits and vegetables. Parameters : Number of valve openings: determined by the user Production capacity: 45-50 pcs/min, 16 plugs (one circle) Peeling thickness: 1.1-1.3 mm adjustable Suitable fruit diameter: 65-120 mm remove seeds diameter: 22 mm (can be determined according to user requirements) Peel removal rate: 95 % or more . (normal apples, non rotten fruits, dry scars, irregular fruits.) Excluding both ends. Total power of equipment: 2.25 kw Equipment specifications: host; 1800 * 1050 * 2100, auxiliary equipment 3300 * 1200 * 900 Equipment weight : 850 kg Equipment gas consumption: 0.65 m3/min Advanced technology : small area,efficient,sanitary,easy operate and clean,saving labor costs . Apple process machine apple machinery fruit machinery ,pear /apple/round fruits/vegetable peeler, fruit process machine ,apple/pear peeling machinery ,apple /pear seeds remove machine/machinery Canned apple /pear /fruits making machine applesauce making machine applesauce process machinery /equipment, apple ring making machine ,apple production line apple plant ,apple/pear half cutting machinery

Factory Automatic Hot Eye Onion peeling process machine,from small capacity to big capacity Onion peeling process: the onion is manually fed into the hopper --- the conveyor belt automatically feeds the onion into the peeling box for peeling --- after peeling, the onion goes into the peeling roller. Under the action of high-pressure air at the side, the first and second layers of the onion are peeled off and sent out to complete the whole processing process. Features: 1. Advanced technology, reasonable mechanism, beautiful appearance, safe and reliable use, all stainless steel. 2. Automatic peeling without damage. 3. The depth of peeling is even. 4. The feeding belt is used for automatic feeding, which is simple in design and convenient in use. 5. Less peeling, high recovery rate of finished products, and over 98% of finished products. 6. Mechanical processing eliminates the hidden danger of manual processing of infectious diseases and unsanitary products. Parameters 1.process arrange diameter of round shape onion 30-150mm. 2.capacity 1000-1500kg/h 3.Power 3kw 4.Voltage 380V 5.Air Compressor :flow 1.5m2/min, pressure 0.7MPa ,power 11kw 6.Machine size 1.5*1.3*1.4m 7.Weight 420kg Start working flowing: 1.Fill onion in the loading box 2.Start the pneumatic valve switch 3.Start the power-supply switch 4.According to onion drying or fresh to adjust loading speed button/air pressure ,in order to ensure the clean degree of removing onion skin 5.When finished adjusting ,The equipment operates normally and automatically.

Product : Valves Brand : Renaissance Pipe Fitting Inc. Sizes : Refer the specification Condition : New Rating : 4.6, based on 112 reviews price : Start from 5 USD RFP India is Indias wellknown manufacturer supplier and exporter of Valves which is a device that regulates directs or controls the flow of a fluid gases liquids fluidized solids or slurries by opening closing or partially obstructing various passageways Valves are technically valves fittings but are usually discussed as a separate category In an open valve fluid flows in a direction from higher pressure to lower pressure It is being made up from different materials like Stainless Steel Carbon Steel Alloy Steel Gun Metal Brass Bronze Forge Cast Iron Cast Steel and Mild Steel Meanwhile Valves are quite diverse and may be classified into a number of basic types such as Ball Valve Butterfly valve Ceramic Disc valve Check valve Choke Valve Diaphragm valve Gate valve Globe valve Knife Valve Needle Valve Pinch Valve Piston Valve Plug Valve and so on

Medbar Karman Cannula Manual Vacuum Aspirator Single Valve

Raw melting material - aluminum scraps, cans, engine waste etc. Output capacity - 5-30 tons/h, customized Automation - Full automatic/ half automatic (based on output requirement and investment budget Ingot type - ADC12 (7.5kg/ 10kg / customized) 1. After cleaning the oil and grease of waste aluminum, manually put it into the furnace with a forklift; 2. Ignition for melting furnace .Heat up to 680C, and input appropriate proportion of alloy elements. Heat up to 800C, melt and stir evenly, then fetch samples to the spectrometer for testing. Every lot of production need to do testing . 3. Put A tool that attracts iron into the furnace by forklift, to suck away the iron in the aluminum water. 4. Put the slag agent into Alu liquid to remove the slag. After slag removed , put the slags into Aluminum ash separation machine , and let the aluminum water and ash separate. The proportion of slag agent and aluminum liquid is 1:500 5.Open the drain valve and the aluminum water flows automatically to the ingot production line After the ingot casting is completed, the ingot stacking robot will stack the ingots, which means the production is completed.

ROSSMAX GB102 MANUAL SPHYGMOMANOMETER White enamel 300 mmHg no-pin stop manometer Chrome-plate brass air release valve Latex free cuff Stethoscope 2 years warranty Please Don't Hesitate To Contact Us In Case Of Any Interested

Marine RIB Inflatable boat, RIB boat used for leisure , sport, recreational RIB520 Model RIB-520 Length(cm): 520 Width(cm) : 245 No.of chambers : 3 Tube Diameter(cm) : 53 Net Weight(kg) : 400 Gross Weight(kg) : 410 Horse Power(HP) : 50 Max Persons : 9 Packing size(cm) : 460*180*100 standard equipment: A pair of Oar Foot pump Repair kit(materials,spanner,air valve,manual,glue)

Rigid-inflatable boat (RIB) is made by fiberglass hull and inflatable tube, it is a lightweight but high-performance and high-capacity boat constructed with a solid, shaped V hull . The design is stable and seaworthy. which can be used for a variety of applications including rescue, interception, patrolling,pleasure,leisure and as tenders for larger ships. Rigid Hull Fiberglass Inflatable Boat RIB boat, Fiberglass hull with inflatable tube boat, RIBs 580 Model: RIB580 Full length: 580cm/19ft Full width 245cm Tube Dia: 53cm Hull weight: 422kgs Max person: 12 persons Gross Weight:520kg Recommend HP: 60 to 90 HP Packing size: 560*210*115 cm Materials, 0.9mm or 1.2mm pvc materials or Hypalon materials boat Standard accessories: Repair kit(materials,spanner,air valve,manual,glue)

Rigid Hull Fiberglass Inflatable Boat RIB boat, Fiberglass hull with inflatable tube boat, RIBs 580 Model: RIB580 Full length: 580cm/19ft Full width 245cm Tube Dia: 53cm Hull weight: 422kgs Max person: 12 persons Gross Weight:520kg Recommend HP: 60 to 90 HP Packing size: 560*210*115 cm Materials, 0.9mm or 1.2mm pvc materials or hypalon materials boat Standard accessories: Repair kit(materials,spanner,air valve,manual,glue) Extra accessories: 5 sets life jacket inside aluminum fuel tank Anchor and rope FRP anchor holder Bilge pump 60 A Battery with box Cream color cushion Console(Alu wind screen,Six wire switch,oil gauge) Seat box Steering system Stainless or FRP A Bar with lighter Trailer Hydraulic steering system Stainless Canopy/ T-TOP Canopy Stainless C type ladder FRP Step Butffly type Anchor holder Stainless rail duct New type of square anchor Pull stick Teak floor

Rigid-inflatable boat (RIB) is made by fiberglass hull and inflatable tube, it is a lightweight but high-performance and high-capacity boat constructed with a solid, shaped V hull . The design is stable and seaworthy. which can be used for a variety of applications including rescue, interception, patrolling,pleasure,leisure and as tenders for larger ships. Model: RIB580 Full length: 580cm/19ft Full�  width�  245cm Tube Dia: 53cm Hull weight: 422kgs Max person: 12 persons Gross Weight:520kg Recommend HP:� 60 to 90� HP Packing size: 560*210*115 cm Materials, 0.9mm or 1.2mm pvc materials or Hypalon materials boat Standard accessories: Repair kit(materials,spanner,air valve,manual,glue) Original manufactuer eastsportboat from China. Do not support transport by air. only can send by sea from China Equipment Extra accessories for extra pay: 5 sets life jacket inside fuel tank Anchor and rope FRP anchor holder Bilge pump 60 A Battery with box Cream color cushion Console(Alu wind screen,Six wire switch,oil gauge) Seat box Steering system Stainless or FRP A Bar with lighter Trailer Hydraulic steering system Stainless Canopy/ T-TOP Canopy Stainless C type ladder FRP Step Butffly type Anchor holder Stainless rail duct New type of square anchor Pull stick Teak floor

19ft Rigid hull inflatable RIB boat fiberglass fishing boat RHIB boats rigid-inflatable boat (RIB) is made by fiberglass hull and inflatable tube, it is a lightweight but high-performance and high-capacity boat constructed with a solid, shaped V hull . The design is stable and seaworthy. which can be used for a variety of applications including rescue, interception, patrolling,pleasure,leisure and as tenders for larger ships. Rigid Hull Fiberglass Inflatable Boat RIB boat, Fiberglass hull with inflatable tube boat, RIBs 580 Model: RIB580 Full length: 580cm/19ft Full width 245cm Tube Dia: 53cm Hull weight: 422kgs Max person: 12 persons Gross Weight:520kg Recommend HP: 60 to 90 HP Packing size: 560*210*115 cm Materials, 0.9mm or 1.2mm pvc materials or hypalon materials boat Standard accessories: Repair kit(materials,spanner,air valve,manual,glue) Extra accessories: 5 sets life jacket inside aluminum fuel tank Anchor and rope FRP anchor holder Bilge pump 60 A Battery with box Cream color cushion Console(Alu wind screen,Six wire switch,oil gauge) Seat box Steering system Stainless or FRP A Bar with lighter Trailer Hydraulic steering system Stainless Canopy/ T-TOP Canopy Stainless C type ladder FRP Step Butffly type Anchor holder Stainless rail duct New type of square anchor Pull stick Teak floor

SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".

SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".

SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75200 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".

SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".

SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc ( +10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80 C. When the DC panel has a temperature over 100 C, the module will stop working; when the DC panel has a temperature below 90 C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".