Product Name IE3 Efficiency Electric Motor Generator Stator Rotor Core Material Cold rolled non-oriented silicon steel Supplier WISCO, BAO STEEL ,SHOUGANG GROUP,TISCO Standard DIN GB ISO JIS Range 80mm -- 1250mm Manufacturing Type Compound Die, Single Notching, Progressive Die, Die Casting, Centrifugal Cast Service OEM Packing PP + Solid Sea-worthy Carton with Desiccant Delivery Time 50 - 120 Days Application Three phase Induction motors, pumps, generators.
Principal Power steering system consists of a cylinder, a pump and handle. The oil is pressured from hydraulic pump and a handle(orbitrol) control a cylinder. The cylinder helps rudder move and the required oil is supplied from the hydraulic pump. Cylinder is classified Single, Rotary, Twin, Two rudders by torque and appearance Pump is classified Pulley type drived by engine and Power unit drived by electric motor We offer 7 kinds of handles with various appearance and functions. Features Narrow handle diameter helps you operate with small energy and power steering system offers light operation On where you put the handle, the rudder is fixed Structure that the rudder does not rotate even when the tide power the rudder When engine stops, manual steering is capable (Handle becomes heavy) You can choose the combination fit to your vessel Application Vessel above 350 HP A wide range of vessel from fishing boat to ferry
Principle Electric steering system is equl with the power steering system equipped a solenoid valve. It is the system which steers with solenoid valve by comparing resistance values of electric handle and rudder angle sensor It consists of a cylinder and a pump, an solenoid valve and a electric handle. The cylinder makes the rudder move and the pump supplies the oil to the cylinder. Handle is to swap the direction of hydraulic pressure Cylinder is classified Single, Rotary, Twin, Two rudders by torque and appearance Pump is classified Pulley type drived by engine and Power unit drived by electric motor We offer 7 kinds of handles with various appearance and functions. You can choose the combination fit to your vessel Key features Narrow handle diameter helps you operate with small energy and power steering system offers light operation The number of rotation wheel is 2.8 like the hydraulic handle Analogue type of a indicator for handle and a rudder angle indicator are applied. Controlled by Joystick / Autopilot USB port Autopilot can be used together. Application Vessel above 350HP A wide range of vessel from fishing boat to ferry
Stator and Rotor We provide Steering Control Unite Stator and Rotor, Hebei DENENG Trade Co., Ltd leading products are hydraulic motor and steering control units, which widely used in agricultural machinery, engineering machinery, plastic injection machinery, fishing machinery, mining machinery, oil-drilling equipment , combined harvesters, large horsepower tractor etc. With professional manufacturing experience and great innovative spirit, DENENG products has been sold to worldwide market and popular received by European, North American, South East Asia and Middle East customers.
Uses of base oil sn500 Base oil sn500 use in manufacturing of many lubricants oil , who produce base oil mostly use sn500 as additive in their other product also blenders and compounders are other user of base oil different grades as well as sn500 , mostly base oil add from 1% up to 20% as additive to other products . base oil use in different oil as well is engine oil , motor oil , hydraulic oil , gear oil etc.
1. Stator and rotor used for motor. 2. Precision polish 3. Material: silicon sheet steel 4. All are automatic lamination We promise to provide: In-time response on letters, telephone calls or fax In-time supply the quotation and mould designs In-time communication on the technical points In-time sending pictures for the mould machining progress and mould Finishing schedule In-time mould delivery. You can offer drawing. We guarantee you try our best to meet the requirements. Wooden box and according to customer's demands.
External rotot motor Axial fan motor Induction motor Refrigeration
Motor Stator Lamination and Rotor for Electric Submersilbe Pump Systems with No burrs and Contamination We can make Manual mould and High speed mould. Two types of moulds for manual. But our parts will not have big burrs and no cantamination. We use manual stack. High speed mould is the best ,no burrs ,parts are also very smoothly.But mould fee is very high. We have matched insepction equipments. Both manual mould and high speed mould our price is very competitive ,please kindly contact us for further news.
Material:cold rolled silicon steel Frame size:80-710 Process: cutting-punching-stacking Lamination treatment: annealing/oxidation/painting Seaworthy packing
Product Name motor stator stamping segment lamination Material cold rolled non-oriented silicon steel Supplier WISCO, BAO STEEL ,SHOUGANG GROUP,TISCO Process Heat treatment, Annealing and Turning Surface Standard DIN GB ISO JIS Range customized Stacked length Max 1100mm Service OEM&ODM Packing PP + Solid Sea-worthy Carton with special process of antirust Delivery Time 10 Days if existing compound tools are available/50 Days if we need to making tools
1)Material Stainless steel 2)Used for various kinds of motors 3)Specification: As per customers requirment to design. 4)High quality and reasonable price 5)Packaging Details: Wooden box or according to customer's demands 6)Delivery Time: Depend on order 7)Payment Terms: L/C, T/T, MoneyGram 8)Supply Ability: 50000 Set/Sets per Year . Service ability: In-time response on letters, telephone calls or fax In-time supply the quotation and mould designs In-time communication on the technical points In-time sending pictures for the mould machining progress and mould Finishing schedule In-time mould delivery. wooden box and according to customer's demands.
2m3 Removable Concrete Mixer Trucks - Mixing tank capacity: 3.2m3 - Concrete capacity: 2m3 - Dimension: 3600mm*1900 mm*1800 mm - Weight: 1.350kg - Hydraulic motor: BM 160 Manufactured and shipped from Viet Nam. Buyer signs papers and buys directly from factory. Buyer can visit factory.
- Mixing tank capacity: 5.2m3 - Concrete capacity: 3m3 - Dimension: 4250mm*1900 mm*1800 mm - Weight: 1.650kg - Hydraulic motor: BM 160 Manufactured and shipped from Viet Nam. You sign papers and pay directly to the factory. You can visit factory in Viet Nam.
- Mixing tank capacity: 8.6m3 - Concrete capacity: 5m3 - Dimension: 4800mm*2450mm*1900mm - Weight: 2.630kg - Hydraulic motor: BM 200 Buys signs papers and pays directly to factory in Viet Nam. Product is manufactured in Viet Nam. Buyer can visit factory in Viet Nam
- Mixing tank capacity: 7.0m3 - Concrete capacity: 4m3 - Dimension: 4150mm*2200mm*1900mm - Weight: 2.200kg - Hydraulic motor: BM 200 Buyer signs papers and pays directly to factory in Viet Nam. Buyer can visit factory in Viet Nam.
Product Specification Power Range : 1.0 HP to 2.0 HP Operating Speed : 0 - 3100 RPM DC Power Range : 900 Wp - 2000 Wp DC Voltage Range : 70 Vmp - 110 Vmp Head Range : 30 Mtr - 90 Mtr Discharge Range : 8000 LPD - 30000 LPD Type of Duty : S1 - Zero Running Cost - Less Maintenance - Eco-Friendly - Simple Installation - Pollution Free Material Of Construction - Motor Part Grade Mechanical Seal : Graphite Ceramic Motor Shaft : Stainless Steel Motor Body Pipe : SS-304 Lower Hosing : Aluminum Diaphragm : High Nitrile butyl rubber Top Cap : Stainless Steel Bottom Plate : Stainless Steel End Cap : Stainless Steel MATERIAL OF CONSTRUCTION SCREW (HELICAL) PUMP Part Grade Outlet : SS-304 Suction : SS-304 Outer Shell : SS-304 Rotor Screw : Stainless Steel Stator : Rubber Coated Alloy MATERIAL OF CONSTRUCTION â?? CENTRIFUGAL PUMP Part Grade Check valve housing : SS-304 Check valve : PC Suction : SS-304 Outer Shell : SS-304 Impeller : POM Bowl : PC Pump Bush : NBR Pump Sleeve : Stainless Steel Pump Shaft : Stainless Steel Coupling / Pump Couple : Stainless Steel
Centrifugal fan with external rotor motor Backward centrifugal fan Forward centrifugal fan One inlet centrifugal fan Double inlet centrifugal fan Diameter 120----400mm
Monoblock Pumps Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise thereby increasing the life cycle of the motor. salient features High operating efficiency resulting in lower power consumption - Good suction lift characteristics - Specially designed for wide voltage operation. - Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life. - Back pull-out design for easy servicing and repair. - Double shielded ball bearings, so no need of external lubrication. - Mechanical seal is provided as per customers requirement Specification - Power Range : 2.2 Kw - 11.2 Kw (3.0 HP - 15.0 HP) - Version : Three Phase, 380-415V, 50Hz AC Supply - Speed : 2880 RPM - Maximum Total Head : 65 Mtr. - Maximum Flow Rate : 1450 LPM - Maximum Suction Lift : 7 Mtr. - Degree of Protection : IP 44 - Class of Insulation : B0 - Maximum Ambient Tem. : 40 C - Sealing : Stuffing Box - Type of Duty : S1 (Continuous) - Direction of Rotation : Three Phase, Electrically Reversible - Nominal Pumpset Size (Suction X Delivery in inch) : 50 X 40, 50 X 50, 65 X 50, 80 X 65, 80 X 80 100 X 80 and 100 X 100 (All size in mm) Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 1.75 x 10 mÃ?/sec (max.) - Ph Value : 6.5 to 8.5 Material of construction - motor Part Name Material Gland Dori : Graphite String Motor Shaft : EN-19 with SS SLEEVE Motor Body : FG-250 Bearing : SKF End Cover : FG-250 Bracket : FG-250 Flange : FG-250 Casing : FG-250 Impeller : FG-250 Cooling Fan : Aluminium
Falcon regenerative monoset pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise thereby increasing the life cycle of the motor. Salient Features High operating efficiency resulting in lower power consumption. - Good suction lift characteristics. - Specially designed for wide voltage operation. - Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life. - Back pull-out design for easy servicing and repair. - Double shielded ball bearings, so no need of external lubrication. - All Model fitted to Mechanical seal. specification Power Range : 0.37 Kw - 0.75 Kw (0.5 HP - 1.0 HP) - Version : Single Phase, 220-240V, 50Hz AC Supply - Speed : 1440 RPM - Maximum Total Head : 18 Mtr. - Maximum Flow Rate : 4200 LPH - Maximum Suction Lift : 8 Mtr. - Degree of Protection : IP 44 - Class of Insulation : B0 - Maximum Ambient Tem. : 40 C - Sealing : Mechanical Seal - Type of Duty : S1 (Continuous) - Direction of Rotation : Single Phase, Clockwise from driving end - Nominal Pumpset Size (Suction X Delivery) : 25mm X 25mm Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5 material Of construction - Motor Part Name Material Mechanical Seal : Carbon & Ceramic Motor Shaft : SS-410 Motor Body : FG-250 Bearing : SKF End Cover : FG-250 Bracket : FG-250 Flange : FG-250 Casing : FG-250 Impeller : Brass Cooling Fan : Plastic
