Traditional / wooden musical instruments for early childhood.
Wooden drums ..Comes in sizes from 12 cms -15 cms - 20 cms up to 100 cms . Outer shell comes in painting aborgine designs, carving desings. We can also do the designs as per clients requirement. Comes in light brown and dark brown colour. Each piece with brown paper wrap and suitable qty packed in an export carton.
Coal, batubara.Broker
Wood, guitar, coffee green beans.
Piano bench, woodworking products, door.
SONYKS portable rugged GWT unit with 40 data channels. C/w large 10.4" multi-touch display, integrated pump. Incl. 2 batt., PSU, user manual and rugged case. Highlights : First unit with full onboard screen for GWT; top efficiency Unmatched signal-to-noise ratio with broadband and FMC Support non-Eddyfi rings; also Magneto-strictive collars SPECS : Batteries - typical life 8-10 hours Cooling Sealed and fanless Data storage SSD, 256 GB Display resolution 1024 768 Display size 26.4 cm (10.4") Display type Capacitive multi-touch, with 3 mm (1/8 in), chemically strengthened glass cover. Non-reflective (AR coating), anti-fingerprint (oleophobic coating), optically bonded LCD and touchscreen. Passive backlight enhancement Nb. of transmit channels 40 Batteries - type 2x li-ion, rechargeable, DOT compliant Compliance IEC 61010-1, CE, UKCA, WEEE, FCC Part 15, ICES-001 Data readback on PC software Yes Output voltage 200V peak to peak Probe recognition and setup (ChipID) Automatic with Sonyks tooling including ring type, size, serial number, pipe and angular orientation Harness available Yes Automated self-check Onboard capacitance and resistance testing Connectivity Gigabit Ethernet, Wi-Fi 6 (802.11ax), USB 2.0 (Ã??3), HDMI Dimensions (W x D x H) 355 288 127 mm (14.0 11.3 5.0 in) Focussing options C-Scan imaging; Time delay focussing GPS Accurate positioning to 2.5 m (8.2 ft) Internal pump Yes IP rating IP54 Laptop connectivity Yes Maximum sample range 125ms (365m longitudinal mode; 200m torsional mode) Max averaging 128 Nb. of receive channels 40 Onboard pump SSD, 256 GB Receiver Gain Up to 100dB Supported rings Sonyks Piezo and Magneto tools, Teletest and other commercial piezo-based rings Supported Technologies/Techniques GWT, LRUT, MRUT Storage Wi-Fi or Gigabit Ethernet Transduction compatibility Magnetostrictive and Piezoelectric transducers Weight (with batteries) 7.2kg (15.9 lb) APPLICATIONS : Corrosion Under Insulation (CUI) on insulated pipes and pipelines High-speed, high-efficiency pipeline corrosion screening Distribution, gathering, feeder or transmission pipelines Pipeline integrity programs Small diameter piping Unpiggable pipes Power plant pipelines Buried pipeline inspection Flanged pipes River crossings Road crossings Drill riser inspection Stainless steel pipe inspection Chemical plant piping Food piping
Children books and comics.
Due to its versatility the hand-held multifunction calibrator Pascal series is ideally suited for on-field testing and calibration of industrial measuring instruments. The typical application is the calibration of pressure transmitters, temperature transmitters, pressure gauges, temperature probes and other measuring devices. The calibration data are stored in the instruments memory. The communication with a PC is used to remotely control the unit and to download the calibration reports.
TOPO REF KERATOMETER Tomey Model RT-7000, NEW! * 3 systems in one device * Automatic alignment and triggering * Color touch screen * Various topography views * Electronically controlled chin rest * Joystick orientation * Pupil and corneal-measurement Refractive Power Measurement Spherical Refractive Power (S) Measurement Range -25.00 D to +22.00 D (at VD = 12.0 mm) Display Unit 0.01 D / 0.12 D / 0.25 D Cylindrical Refractive Power (C) Measurement Range 0 D to �± 10.00 D (at VD = 12.0 mm) Display Unit 0.01 D / 0.12 D / 0.25 D Astigmatism Axial (A) Measurement Range 0 �° to 180 �° Display Unit 1 �° Minimum Pupil Diameter �? 2.2mm Vertex Distance 0mm / 12.0mm / 13.5mm / 14.0mm / 15.5mm / 16.0mm Measurement Time 0.2 seconds / single eye Corneal Curvature Measurement Corneal Curvature (K1, K2, AVG) Measurement Range 5.00 mm to 11.00 mm Display Unit 0.01 mm Corneal Refractive Power (K1, K2, AVG) Measurement Range 30.68 D to 67.50 D (n = 1.3375) Display Unit 0.01 D Corneal Astigmatism (CYL) Measurement Range 0 D to 10 D (n = 1.3375) Display Unit 0.01 D Axis Of Corneal Astigmatism (AXS) Measurement Range 0 �° to 180 �° Display Unit 1 �° Measurement Area Cornea �? 3.0 mm (at 8.00 mm corneal curvature) Measurement Time 0.1 seconds / single eye Measurement Of Corneal Shape Display Range 9 D to 100 D
Features Assisted acquisition and analysis Automated real-time diagnosis and reporting Digital continuity brick between acquisition and reporting Remote Assistance UT PAUT Modular apps: Choose the software you need Some apps can be used by non-certified personnel Connectivity: Wi-Fi, 4G, etc Windows environment ready for connecting with your software Aerospace specific Automated real-time reporting avoiding dual entries and human errors Light-weight industrial tablet with large screen display Technical specifications Dimensions: 280 mm 198 mm 80 mm 80 mm Weight: 1.7 kg Connectors : - Power supply, transfer of settings and data: USB - Ultrasonic translators: 2 Lemo 00 - Multi-element ultrasonic translators: 1IPEX - Position encoder inputs ( 4) : Fischer 12cts Analog signal output: none Conformity with standards EN 12668-1:2010 and EN 15548- 1:2008 CE marking Indoor and outdoor use Relative humidity in operation 30 % to 80 % (non-condensing) Protection class: IP54 Power supply: 100-240 V AC 50/60 Hz 1.6 0.9 A Pollution degree: 2
Non-Invasive & Non-Destructive Wireless Technology¯ Unlike other devices which must drill into the concrete and physically connect to the rebar to evaluate corrosion, the is completely non-destructive. Fast & Accurate Real Time Data in Seconds Data is collected, analyzed, and stored wirelessly within the mobile app on the tablet provided where it can be easily shared with team members. Automatic Report Generation Simple Detailed corrosion evaluation of reinforced concrete structures is presented as contour maps which are accessible in real-time on the tablet. Recipient of NACE Corrosion Innovation Award iCOR is the most advanced wireless corrosion measurement device for evaluating the health of reinforced concrete structures. iCOR detects corrosion potential, corrosion rate, and in-situ electrical resistivity. In 2019, the iCOR was presented the Corrosion Innovation Award by the National Association of Corrosion Engineers (NACE). Applications Detection of corrosion in reinforcement Measurement of rebar corrosion rate Evaluation of corrosion potential of rebar Measurement of in-situ electrical resistivity Assessment of concrete durability Rehabilitation and repair of concrete structures Software Real-time contour mapping of corrosion rate, electrical resistivity, and corrosion potential Accurate non-subjective algorithm-based interpretations Multiple and directional parameters tested in a single measurement Easy reporting and data exporting Hardware Non-destructive, and non-invasive wireless technology Measurements obtained and evaluated within seconds Simple and easy-to-use with minimal training required Single-person operation device Tablet included with free Android app Award-winning patented technology Patented Technology iCOR benefits from the patented CEPRA technology that makes it possible to estimate the rate of rebar corrosion through a noninvasive, non-destructive approach. This means that the need to connect the device to the rebar to obtain measurements, which is the case for other commercial devices, is eliminated with the iCOR. TECHNICAL SPECIFICATIONS : Testing Time 3 to 30 seconds Corrosion Rate Range 0 to 500 m / year Corrosion Potential Range -800 to 200 mV / CSE Electrical Resistivity Range 0 to 10,000 m INCLUDED : Beta unit, Tablet with hands-free carrying support, Data Analysis App., User manual, Connection sponges, USB cable, Conductive solution, Carrying Case.
Description The Innov-X Omega X-Ray fluorescence spectrometer is a handheld XRF analyser. With its ultra rugged design, diverse field analysis is possible in any conditions. The XRF delivers fast and precise identification and analysis of elements from phosphorus to uranium (P to U). Advantages of Field Portable XRF. In the past, studies relied exclusively on expensive and time consuming analysis based on samples that hopefully characterised the site. The portable XRF has revolutionised environmental investigations by allowing you on-the-spot elemental analysis, in real time. Measure the composition of soils, debris, run-off streams, dust wipes, coatings, corings, paints, plastic and wood instantly,saving you time and money. From phosphorus to lead, from low ppm to 100% - in soils, solids, liquids, powders, cores, fragments, filters & films, slurries and more. One simple test can analyse up to 25 separate elements in seconds, including priority pollutants. Determine zonal and contamination patterns; track pollutant migration caused by extreme weather; perform real-time surveys to delineate and define metals present. In-situ soil analysis for rapid, comprehensive site investigations: Delineate metals present and contamination patterns Measure high volume field tests to minimise laboratory analytical costs Test soil directly through plastic corings or bagged samples Establish contamination boundaries and depth profiles for remediation and disposal Collection of samples to produce rock-solid analytical data at the site: XRF is non-destructive submit same sample for laboratory confirmation Ensure validation requirements/targets are met on-site in real time Prepared soil sample testing assures the maximum possible accuracy Ultimate XRF Performance with Silicon Drift Detector (SDD) Technology The Innov-X Omega Xpress and Omega Xpress Vacuum Alloy Analyzers utilize the latest in detector technology - an innovative, large area Silicon Drift Detector (SDD), commonly used and tested extensively in high end, laboratory based instrumentation. In comparison to a traditional Si PiN Diode detector, the SDD provides: 10x improvement in signal to background ratio Marked resolution improvement, from 195eV to 165eV The capacity to handle 10x more counts Key benefts to the user: >3x improvement in reading speed. Light element (Mg, Al, Si, P, S) analysis in air 3x better limits of detection for sensitive tramp elements
Benefits Environmental studies can now save time and money with real-time, on-the spot elemental analysis - from Magnesium to Uranium, From PPM to 100 % - in solids, liquids, powders, cores, fragments, filters and films, slurries and more. Portable XRF provides cost-effective, timely analysis. Innov-X combined an x-ray tube source, multiple beam filtering and the HP PDA to deliver superior limits of detection, speed, precision and upgrade capability. Features Superior performance of Cr and other metals. Light element Analysis Program (LEAP) analyzes P, S, Cl, K and Ca Utilizes advanced and universal XRF data modeling: Compton Normalization: "Internal Standard" provides for quantitative analysis without site-specific calibrations Fundamental Parameters: Standardless, ideal for samples with high and low concentration of several elements Empirical Calibrations: "Calibration Curves" allows user-generated calibration curves Add new elements and calibrations easily. Innov-X analyzers will meet your requirements today and in the future View spectra on screen Compare spectra for comparative analysis and display results versus standards Stored tests can be re-run with new parameters or models Data security: stores in binary format for data intel
BRUKER S1 TITAN HANDHELD XRF SPECTROMETER The S1 TITAN is among the lightest (1.5 kg, including battery) tube-based handheld XRF analyzers on the market today. Fast analysis speed and exceptional accuracy are two key attributes that help define the S1 TITAN. Other innovative features include an integrated touch-screen color display, 50 kV X-ray tube, SMART GradeTM timing, SharpBeamTM optimized X-ray geometry, Silicon Drift Detector (SDD), and an extremely tough housing that is sealed against humid and dusty environments. Contact our sales team today to learn more about the innovative S1 TITAN! The S1 TITAN series is available in four (4) configurations: models 800, 600, 500 and 200. All models use Brukerâ??s SharpBeamTM technology. The S1 TITAN 800 and 600 use a FAST SDD detector to give you incredibly fast analysis times. The S1 TITAN 500 is configured with a fast, accurate, and affordable standard SDD detector. The S1 TITAN 200 is configured with an economical Si-PIN detector. In addition, the S1 TITAN can be configured with calibrations that are optimized for a variety of sample materials- including a wide range of alloys, various mining & environmental samples, as well as restricted materials. SharpBeamTM technology The S1 TITANs patent pending SharpBeamTM technology optimizes the detector and tube geometry. The optimized geometry has many desirable effects, including: Reduces power requirements Reduces weight Improves measurement precision Improved detection limits Increases battery life S1 TITAN Technical Details NEW! pXRF Specification comparison (PDF) Calibration range (depending on specific calibration): S1 TITAN 800: 37 elements, including light elements Mg, Al & Si S1 TITAN 600: 37 elements, including light elements Mg, Al & Si S1 TITAN 500: 32 elements S1 TITAN 200: 32 elements Weight: 1.5 kg (3.3 lbs) with battery Size: 25 cm x 28 cm x 9 cm (10 in x 11 in x 3.7 in) Sample temperature: S1 TITAN 800: Default to 150 C with Ultralen window. Up to 500C with Kapto window and hot surface adapter. S1 TITAN 600: Default to 150 C with Ultralene window. Up to 500C with Kapton window and hot surface adapter. S1 TITAN 500: up to 500C S1 TITAN 200: up to 500C TITAN Detector ShieldTM: Included on all S1 TITAN models Integrated camera: S1 TITAN 800: Included S1 TITAN 600: Optional S1 TITAN 500: Not available S1 TITAN 200: Not available Detector: S1 TITAN 800: FAST SDD�® S1 TITAN 600: FAST SDD�® S1 TITAN 500: Standard SDD S1 TITAN 200: Si-PIN Collimator options: S1 TITAN 800: 5mm standard. Optional 8mm or 3mm S1 TITAN 600: 5mm S1 TITAN 500: 5mm S1 TITAN 200: 5mm X-ray tube: Rh target; max voltage 50 kV Filter changer: S1 TITAN 800: Five position motorized filter changer S1 TITAN 600: Five position motorized filter changer S1 TITAN 500: Fixed filter S1 TITAN 200: Fixed filter
Product Description Product Info for Sightmark Ghost Hunter 1x24 Night Vision Goggle Binocular Kit Designed to be easy on your eyes, the Sightmark Ghost Hunter 1x24 Night Vision Binocular Goggle Kit SM15070 has a dual tube constuction with a more comfortable viewing system that provides more vivid detail than units made with a single tube system. This Night Vision Binocular from SightMark is equipped with a head mount for comfortable, long-lasting, hands-free operation when the NV bino is flipped down, and can be flipped up when it is not in use. The Sightmark Ghost Hunter NightVision Binocular is equipped with a high-power infrared illuminator providing a bright, clear image. The sightmark Ghost Hunter Nightvision Binocular Goggle Kit has a lightweight, durable polymer construction for increased resilience. This Sightmark Night Vision Binocular Kit includes an automatic shut-off feature, which turns off the unit when exposed to bright light sources, ensuring years of operation. The Sightmark Ghost Hunter Night Vision Binocular is protected by a Limited Lifetime Warranty. Sightmark-Make Your Mark Specifications for Sightmark Ghost Hunter 1x24 Night Vision Goggle Binocular Kit: Color: Black Magnification: 1 x Objective Lens Diameter: 24 mm Eye Relief: 12 mm Exit Pupil: 5 mm Field of View, Linear: 54 m at 100 m Field of View, Angle: 30 degrees Optical Coating: Fully Multi-Coated Binoculars Focus System: Center Focus Interpupillary Distance: 2.5 in Close Focus: 0.9 ft Diopter Adjustment Range: -5 - 5 dpt Water Resistance Level: IPX-3 Length: 5.35 in Weight: 13.8 oz Finish: Glass filled nylon composite Condition: New Package Type: Box Additional Features: Dual tube design for accurate depth perception and environmental awareness, Automatic shutoff when exposed to bright light, Integrated IR illuminator, Hand held and head mountable operation Included Accessories: Lens Cloth, Carring Case, Headmount Magnification Type: Fixed Features of Sightmark Ghost Hunter Binoculars: High quality resolution Close range of focus High power IR illumination Ergonomic design 1/4 tripod and accessory socket Hands free head mount Automatic shut off Lightweight Durable construction Covered by the Sightmark Limited Lifetime Warranty Package Contents: Sightmark 1x24 Nightvision Binoculars Carrying case Lens cloth Head mount
Instrumentation, valve, and mechanical equipment.
Gear, cutting tools.Marking, throphy
Laboratory material testing equipment for soil, concrete & asphalt.
Pump, blower and equipment waste water treatment.Manufacturing and contractor
Hand tools.
