Flyin Optronics' MMWDM utilizes thin film coating technology and proprietary design of non-flux metal bonding micro optics packaging. It provides low insertion loss, high channel isolation, low temperature sensitivity and epoxy free optical path. Features l Wide Operating Wavelength Range l Low inertion loss l Ultra Flat Wide Passband l High Channel Isolation l High stability and reliability l Epoxy-free on Optical Path Applications l System Monitoring l WDM Network l Transmitters and Fiber lasers l Fiber Optical amplifier l Fiberoptic Instruments standard package
Flyin optronics' micro-optical wdm utilizes thin film coating technology and proprietary design of non-flux metal bonding micro optics packaging. It provides low insertion loss, high channel isolation, low temperature sensitivity and epoxy free optical path. Features Wide operating wavelength range Low insertion loss Ultra flat wide passband High channel isolation High stability and reliability Epoxy-free on optical path Applications Testing instruments Ftth tri-play system
FWDM is based on proven thin-film folter technology.This WDM is widely used in fiber optical communication system and EDFA where flat and broad operating bands are needed.
ItemUnitParametersNote Pass Port (C-P) Central Wavelength Wavelength Range Insertion Loss Flatness Isolation @ Reflect Port (C-R) Central Wavelength Wavelength Rangenm Insertion LossdB FlatnessdBIsolation @ DirectivitydB Optical Return LossdB Polarization Dependent LossdB PMDps Thermal StabilitydB/ Optical PowermW500 Tensile LoadN& Operating Temperature Storage Temperature Fiber typeSMF-28e Package dimensionmmTBD TBD
Features :
Polarization-maintaining optical wavelength division multiplexer is an optical fiber wavelength division multiplexer made of polarization-maintaining optical fibers.It is Widely used in optical communication networks, optical EDFA, sensing systems and other optical communications.
Ruik's Polarization Maintaining Filter Coupler is one type of passive components, which divides the light into any proportions. PM Filter Coupler Features Applications Low Insertion Loss EDFA & Raman Amplifier High Return Loss Fiber Sensor High Extinction Ratio Fiber Optical Instrument Specifications Parameter Value Type - 1x2 2x2 Center Wavelength 1310,1550nm 1064nm 1310,1550nm 1064nm Operating Wavelength Range ±40nm ±20nm ±40nm ±20nm Max. Excess Loss 0.7dB 0.8dB 1.0dB 1.2dB Uniformity (only for 50/50) 0.4dB 0.5dB 0.6dB 0.8dB Coupling Ratio 01/99~50/50dB Min. Extinction Ratio at 23 20dB 20dB 18dB 18dB(Both axis working) Min. Extinction Ratio at 23 22dB(Fast axis blocked) Min. Return Loss 50dB Max. Optical Power(CW) 300mW Max.Tensile Load 5N Fiber Type Tap Port SMF-28E, Hi1060 or PM Panda fiber Fiber Type Port 1 & 3 PM Panda fiber Operating Temperature -5~+70 Storage Temperature -40~+85 For device with connector, IL is 0.3dB higher, RL is 5dB lower, ER is 2dB lower. The default connector key is aligned to slow axis. Company introduction: RUIK-Tech Communication is a manufacturer and supplier of Optical Passive Components with ISO9001:2015 certified. We design advanced and cost-effective passive components for various industries which include Fiber Laser, Sensing Applications, CATV, Telecommunication, Medical Systems, Gyroscope, etc. Our main products include High Power Components up to 100W (20kW), Polarization Maintaining (PM) and Single-mode Fiber Components with ranging from 780nm to 2000nm. We also provide Customized components to our customers. High power Optical Fiber Components: -Optical Fiber Isolator, up 100W; -Free Space Isolator, up to 100W; -Optical Circulator, up to 30W; -Pump Laser Protector; -Band Pass Filter; -Nx1 Pump Combiner; -Cladding Power Stripper; -Mode Field Adapter; -(N+1)x1 Pump & Signal Combiner, 200W/port; Polarization Maintaining Fiber Components: -In-Line Polarizer/Depolarizer; -In-Line Faraday Isolator; -Optical Circulator; -Fused WDM / Coupler; -Filter WDM / Coupler; -Fiber DWDM -Fiber Mirror; -Faraday Rotator; -Fiber Patchcord / Jumper; -PLC Splitter Module; -Tap / WDM / Isolator Hybrid; Manual Variable Optical Attenuator; -1x2 Polarization Beam Splitter / Combiner (PBS/C) -1x2 Isolator & Polarization Beam Splitter / Combiner (IPBS/C)
Flyin optronics' micro-optical wdm utilizes thin film coating technology and proprietary design of non-flux metal bonding micro optics packaging. It provides low insertion loss, high channel isolation, low temperature sensitivity and epoxy free optical path. Features L wide operating wavelength range L low insertion loss L ultra flat wide passband L high channel isolation L high stability and reliability L epoxy-free on optical path Applications L testing instruments L ftth tri-play system Standard package
Ruik's FWDM Device is a device to combine the two different wavelengths from the fibers to one output fiber. PM FWDM Device Features Applications Low Insertion Loss CATV System High Return Loss CWDM/DWDM Module High Reliability & Stability EPon/Gpon Networks Specifications Parameters Values Type 0698 5598 5506 5548 Transmission Wavelength 1020~1080nm 1520~1580nm 1520~1580nm 1535~1565nm Reflection Wavelength 960~990nm 960~990nm 1020~1080nm 1480±10nm Max.Insertion Loss of Transmission Channel 0.8dB 0.7dB 0.8dB 0.8dB Max.Insertion Loss of Reflection Channel 0.6dB 0.5dB 0.6dB 0.6dB Min.Transmission Isolation@Reflection Wavelength 25dB 30dB 25dB 25dB Min.Reflection Isolation@Transmission Wavelength 15dB 15dB 15dB 15dB Max.Channel Flatness 0.4dB Min.Extinction Ratio at 23 18dB Max. Wavelength Thermal Stability 0.003nm/ Max. Insertion Loss Thermal Stability 0.005dB/ Min.Return Loss 50N Max.Power Handling (CW) 300mW Operating Temperature 0~+70 Storage Temperature -40~+85 For device with connector, IL is 0.3dB higher, RL is 5dB lower, ER is 2dB lower. The default connector key is aligned to slow axis. Company introduction: High power Optical Fiber Components: -Optical Fiber Isolator, up to 100W; -Free Space Isolator, up to 100W; -Optical Circulator, up to 30W; -Pump Laser Protector; -Band Pass Filter; -Nx1 Pump Combiner; -Cladding Power Stripper; -Mode Field Adapter; -(N+1)x1 Pump & Signal Combiner, 200W/port; Polarization Maintaining Fiber Components: -In-Line Polarizer/Depolarizer; -In-Line Faraday Isolator; -Optical Circulator; -Fused WDM / Coupler; -Filter WDM / Coupler; -Fiber DWDM -Fiber Mirror; -Faraday Rotator; -Fiber Patchcord / Jumper; -PLC Splitter Module; -Tap / WDM / Isolator Hybrid; Manual Variable Optical Attenuator; -1x2 Polarization Beam Splitter / Combiner (PBS/C) -1x2 Isolator & Polarization Beam Splitter / Combiner (IPBS/C)
Ruik's FWDM Device is a device to combine the two differnt wavelength from the fibers to one output fiber. RUIK-Tech Communication is a manufacturer and supplier of Optical Passive Components with ISO9001:2015 certified. We design advanced and cost-effective passive components for various industries which include Fiber Laser, Sensing Applications, CATV, Telecommunication, Medical Systems, Gyroscope, etc. Our main products include High Power Components up to 100W (20kW), Polarization Maintaining (PM) and Single-mode Fiber Components with ranging from 780nm to 2000nm. We also provide Customized components to our customers. High power Optical Fiber Components: -Optical Fiber Isolator, up 100W; -Free Space Isolator, up to 100W; -Optical Circulator, up to 30W; -Pump Laser Protector; -Band Pass Filter; -Nx1 Pump Combiner; -Cladding Power Stripper; -Mode Field Adapter; -(N+1)x1 Pump & Signal Combiner, 200W/port; Polarization Maintaining Fiber Components: -In Line Polarizer/Depolarizer; -In Line Faraday Isolator; -Optical Circulator; -Fused WDM / Coupler; -Filter WDM / Coupler; -Fiber DWDM -Fiber Mirror; -Faraday Rotator; -Fiber Patch cord / Jumper; -PLC Splitter Module; -Tap / WDM / Isolator Hybrid; Manual Variable Optical Attenuator; -1x2 Polarization Beam Splitter / Combiner (PBS/C) -1x2 Isolator & Polarization Beam Splitter / Combiner (IPBS/C)
Ruik's bandpass filter device is designed to transmit the light of narrow bandwidth, blocking the others. BPF is applied in a fiber laser. High Power Optical Bandpass Filter Features Applications Low Insertion Loss Fiber Laser High Return Loss Test Instrument High Extinction Ratio Fiber Sensor High Reliability & Stability EDFA Specifications Parameter Value Center Wavelength 976, 1030, 1064, 1550nm Min. Pass Band Width (@-0.5dB) nm As Customized Max. Stop Bandwidth (@-25dB) nm As Customized Max. Insertion Loss of Passband 0.8dB Max. Polarization Dependent Loss at 23, only for PI 0.15dB Min. Extinction Ratio at 23, only for PM 20dB Min. Return loss 50dB Max. Power Handling (CW) 20W or Specified Max. Peak Power for ns Pulse 10kW or Specified Max. Tensile Load 5N Operating Temperature 0 ~ +65 Storage Temperature -40 ~ +85 With connectors, the handing power will be only 1W, IL is 0.3dB higher, RL is 5dB lower, ER is 2dB lower. The default connector key is aligned to slow axis. Company introduction; RUIK-Tech Communication is a manufacturer and supplier of Optical Passive Components with ISO9001:2015 certified. We design advanced and cost-effective passive components for various industries which include Fiber Laser, Sensing Applications, CATV, Telecommunication, Medical Systems, Gyroscope, etc. Our main products include High Power Components up to 100W (20kW), Polarization Maintaining (PM) and Single-mode Fiber Components with ranging from 780nm to 2000nm. We also provide Customized components for our customers. High power Optical Fiber Components: -Optical Fiber Isolator, up to 100W; -Free Space Isolator, up to 100W; -Optical Circulator, up to 30W; -Pump Laser Protector; -Band Pass Filter; -Nx1 Pump Combiner; -Cladding Power Stripper; -Mode Field Adapter; -(N+1)x1 Pump & Signal Combiner, 200W/port; Polarization Maintaining Fiber Components: -In-Line Polarizer/Depolarizer; -In-Line Faraday Isolator; -Optical Circulator; -Fused WDM / Coupler; -Filter WDM / Coupler; -Fiber DWDM -Fiber Mirror; -Faraday Rotator; -Fiber Patchcord / Jumper; -PLC Splitter Module; -Tap / WDM / Isolator Hybrid; Manual Variable Optical Attenuator; -1x2 Polarization Beam Splitter / Combiner (PBS/C) -1x2 Isolator & Polarization Beam Splitter / Combiner (IPBS/C)
Ruik's bandpass filter device is designed to transmitt the light of narrow bandwidth, blocking the others. BPF is applied in fiber laser. RUIK-Tech Communication is a manufacturer and supplier of Optical Passive Components with ISO9001:2015 certified. We design advanced and cost-effective passive components for various industries which include Fiber Laser, Sensing Applications, CATV, Telecommunication, Medical Systems, Gyroscope, etc. Our main products include High Power Components up to 100W (20kW), Polarization Maintaining (PM) and Single-mode Fiber Components with ranging from 780nm to 2000nm. We also provide Customized components to our customers. High power Optical Fiber Components: -Optical Fiber Isolator, up 100W; -Free Space Isolator, up to 100W; -Optical Circulator, up to 30W; -Pump Laser Protector; -Band Pass Filter; -Nx1 Pump Combiner; -Cladding Power Stripper; -Mode Field Adapter; -(N+1)x1 Pump & Signal Combiner, 200W/port; Polarization Maintaining Fiber Components: -In Line Polarizer/Depolarizer; -In Line Faraday Isolator; -Optical Circulator; -Fused WDM / Coupler; -Filter WDM / Coupler; -Fiber DWDM -Fiber Mirror; -Faraday Rotator; -Fiber Patch cord / Jumper; -PLC Splitter Module; -Tap / WDM / Isolator Hybrid; Manual Variable Optical Attenuator; -1x2 Polarization Beam Splitter / Combiner (PBS/C) -1x2 Isolator & Polarization Beam Splitter / Combiner (IPBS/C)
The PM FWDM provides wavelength division multiplexing while maintaining signal polarization. The PM FWDM is characterized with low insertion loss,high return loss,high extinction ratio and excellent environmental stability and reliability. It is ideal for high speed WDM network systems.
Feature 1mW red laser output, test scope more than 5km 650nm highlight red laser output, convert between CW and 2Hz Universal interface adapter, suit for FC, SC and ST. Stable single or multi mode of wavelength, CW or 2KHz Big LCD show working wavelength state One press to shift work wavelength, flexible to operate. Technique Parameter Model DT-605A DT-605B DT-605P Output wavelength 850nm /1300nm 1310nm /1550nm 1300nm /1490nm /1550nm Output power -10dBm -5dBm -5dBm Laser type LD Spectrum range 850nm@10nm ; 1300nm/1310nm/1490nm/1550nm@5nm Stability 0. 01dB@5 minutes£»0. 1dB@24 hours Connector type FC/PC £»Customized ST or SC Fiber type SM¡¢MM Audio load wave 270Hz, 1KHz, 2KHz Display info Wavelength¡¢Battery¡¢carrier wave state Power auto on/off 10 minutes Battery type AA alkaline cell, rechargeable lithium battery Continuous working time >40h
FWDM is based on proven thin-film folter technology.This WDM is widely used in fiber optical communication system and EDFA where flat and broad operating bands are needed.
Otdr of agilent e6000b, anritsu mw9076b, in stock.
1310/1550 dual-wavelength testing; Visible light source, facilitate to inspect fiber break; Complete PC analysis software for you to quickly and efficiently generate a professional OTDR reports; Easy to operate, both the touch-screen panel and keyboard button can completely operate the equipment, meeting different operator¡¦s habits; All important tests can provide a hotkey to operate automatically, to ensure higher test efficiency; 3.5-inch TFT LCD with brightness adjustment support, suit for high luminance environment and night; With auto-sleep function to save power; NI-MH battery-powered, low-voltage protection, continuous working time up to 8 hours; Hardware power switch, thorough stop electrical energy loss, ensures the battery can work longer; We Dodem self design and make OTDR DT630 series handhold OTDR is mainly used for the following tests: Determine fiber optic cable or fiber optic¡¦s failure point, connection point, breakpoint position Describe fiber optic cable or fiber¡¦s loss distribution curve, measure cable, fiber¡¦s length and the loss, attenuation coefficient between two points Measure fiber optic cable, optical fiber connector¡¦s insertion loss Measure fiber optic cable, optical fiber¡¦s reflection loss; DT630 series handhold OTDR can be widely used in metropolitan, WAN, CATV and other communication systems for fiber optic cable or fiber installation, troubleshoot, transformation and maintenance. Specifications: Source type: LCD Connector type: FC (SC, LC) Wavelength: 1310nm 1550nm Fiber type: single mode Attenuation Dead Zone: 6m Event deadzone: 4m Dynamic Range: 28dB Maximum test distance: 80Km Data storage capacity: 180 test curve Size: 220mm¡Ñ110mm¡Ñ70mm Data storage capacity: 180 test curve Size: 220mm¡Ñ110mm¡Ñ70mm
