Profile:
MPM8000 is a powerful multifunction power meter with modular design, which can be applied for monitoring and controlling of the electrical system. MPM8000 can measure and analyze real time data, such as U, I, P, Q, S,COS, F, kWh, kVAr, etc. MPM8000 has the following functions: RS-485 communication port, 2 energy pulse output (include active energy and reactive energy), Max/min data record, and SOE event record. MPM8000 can extend functions by choosing the external optional modules: harmonic analysis, 8 remote signals on/off mode, programmable 4 analog outputs (0~5V or 4~20mA optional), data
storage, Profibus Com. protocol, Ethernet communication functions. The multi-tariff function allows the user to measure energy in any interval (the min. interval is 30min.), which can read the sum, sharp, peak, valley, flat energy data in 30 days, and measure 2nd to 63rd harmonics in statistics.
EMC and safety standard
IEC61000-4-2 (GB/T17626.2) IEC61000-4-8 (GB/T17626.8)
IEC61000-4-4 (GB/T17626.4) IEC61010-1 (GB/T4793.1)
Measured Scope:
The meter MPM8000 can be applied in single phase, 3-Ph 3Wire, 3-Ph 4Wire system. It can be applied vastly in the field of secondary measurement in high Voltage, low Voltage system, or transmission of measured data.
Measured accuracy
Parameters
Display
Direction
Accuracy
Voltage
0~9999.9kV
Class 0.2 scope:5%~100%V
Current
0~9999.9kA
Class 0.2 scope: 5%~100%A
Zero sequence Current Class 0.5
Power factor
-1~+1
Directional
Class 1
Frequency
45~65Hz
¡À0.01Hz
Active Power
-9999~9999MW
Directional
Class 0.5
Reactive Power
-9999~9999MVAr
Directional
Class 0.5
Apparent Power
0~9999MVA
Class 0.5
Active Demand
-9999~9999MW
Class 1.0
Reactive Demand
-9999~9999MVAr
Class 1.0
Active Energy
0~9999999.99Mwh
Directional
Class 1.0
Reactive Energy
0~9999999.99MVArh
Directional
Class 2.0
Multifunction power meter PD194E-9F2
It is YOYIK special sale. Deyang YOYIK power spare parts service is committed to thermal power plants, hydropower station spare parts production and supply. Long-term for the power plant to provide a large number of steam turbine spare parts, turbine generator spare parts, boiler spare parts, turbine spare parts accessories, water turbine generator spare parts, generator cover plastic seal, steam turbine cylinder head high temperature sealant, Oil cooler, mirror plate, steam turbine heating rods and other power plant spare parts spare parts. Welcome to inquire
Yoyik can offer many spare parts for power plants as below:
#DF-Multifunction power meter PD194E-9F2-DF
Transducer DBS/Q-231
Eddy Current Sensor PR6423/001-031
Level Gauge AL501-D51002
LVDT transmitter XCBSQ-01/500-01-00
pt 100 temperature probe WZPM2-201T
digital stabilizer control card FBMSVH
Splitter EHM-01-12D
power module unit AC100-450V
linear displacement transducer sensor TD-1-400
Differential Pressure Gauge 5NN-K5-M4-CIA
Sensor Proximity Turbin TM0702-05
optical linear position sensor BTL5-E10-M300-P-S32
speed sensor M16*1D-100-02-01
Pressure Switch B-4-24-B-IP65-06-JL-NH
pickup sensor price G-065-02-01
VOLTMETER 6L2-V
Ultrasonic Level Transmitter MPM626W6E22C3
Sensor DF310880-90-04-02
LVDT transmitter XCBSQ-01/200-01-22
VIBRATION PROTECTIVE TRANSMITTER SDJ-101
LVDT Sensor TDZ-1C-03
ac transducer switch 4RN-EE45-M4-C1A
LVDT Sensor 7000AT
Temperature switch T768TS040XCNC4 20/95C
magnetostrictive position sensor TDZ-1-H
k type probe sensor WRNK2-231
heat expansion sensor DT-2
high temperature inductive sensor CWY-DO-815008
Brake Switch RC771BZ090Z
magnetic pick up sensor NE6103-050-150-03-09-01-00
Eddy Current Sensor PR6422/003-101
high pressure limit switch 453941-N12065
Excitation Cable BXR-300/500V-240
absolute linear position sensor 8000TDGN
Embedded intermediate relay GZY-210/110V
Oxygen Analyzer Heater Assembly AZ200 721
Multifunction power meter PD194E-9F2
MPM8000 is a powerful multifunction power meter with modular design, which can be applied for monitoring and controlling of the electrical system. MPM8000 can measure and analyze real time data, such as U, I, P, Q, S, COS¦µ, F, kWh, kVAr, etc. MPM8000 has the following functions: RS-485 communication port, 2 energy pulse output (include active energy and reactive energy), Max/min data record, and SOE event record. MPM8000 can extend functions by choosing the external optional modules: harmonic analysis, 8 remote signals on/off mode, programmable 4 analog outputs (0~5V or 4~20mA optional), data storage, Profibus Com. protocol, Ethernet communication functions. The multi-tariff function allows the user to measure energy in any interval (the min. interval is 30min.), which can read the sum, sharp, peak, valley, flat energy data in 30 days, and measure 2nd to 63rd harmonics in statistics.
All our instruments fulfill all important requirements and regulations concerning electromagnetic compatibility and safety isolation (IEC61000, IEC1010 standard and EN61010 standard). The devices have been developed, manufactured and tested in accordance with Quality Assurance System ISO 9001.
194Q is a high-end multifunction power analyzer manufactured by Blue Jay. higher measurement accuracy and powerful functions. With its four direct access keys and TFT displays friendly full text interface helps user operate device more easy in 3P3W or 3P4W LV installation. All monitored data is available via a digital RS485 communication port running Modbus Protocol.
It can be used as a data gathering device for an intelligent Power Distribution System or Plant Automation System. Provide Harmonic measurement with multi-tariff record user can easy establish accounting standards for different time. Max 52th harmonic individual monitor let user clear grasp of the present electrical grid quality.
118102 Multifunction Power Meter Suppliers
Short on time? Let Multifunction Power Meter sellers contact you.
Using electrical parameters means using several
analog or digital single-function products such as
ammeters, voltmeters or watt meters.
BJ194E-2SY, with its four direct access keys and
LCD displays, helps you use all the parameters in
3P3W or 3P4W LV installation.
These parameters can be centralized on a PC or
PLC through an RS 235 link using MODBUS
protocol. The casing is designed so that the
installer can easily fit the meter to the door of a
cabinet.
To facilitate and optimize the operators work, the
BJ194E uses one of the most functional principles
for integrating communications or metering.
Using electrical parameters means using several
analog or digital single-function products such as
ammeters, voltmeters or watt meters.
The BJ-194e-3S4 is a digital LV three-phase
measurement device.
It displays simultaneously on the 3 phases the
most frequent values for an electrical installation or
for monitoring generator sets.
Using electrical parameters means using several
analog or digital single-function products such as
ammeters, voltmeters or watt meters.
BJ194E-9SY, with its four direct access keys and
LCD displays, helps you use all the parameters in
3P3W or 3P4W LV installation.
These parameters can be centralized on a PC or
PLC through an RS 235 link using MODBUS
protocol. The casing is designed so that the
installer can easily fit the meter to the door of a
cabinet.
To facilitate and optimize the operators work, the
BJ194E uses one of the most functional principles
for integrating communications or metering.
BJ-194Z is a high-end multifunction power meter
manufactured by Blue Jay. It is the ideal choice for
monitoring and controlling of power distribution
systems. With its four direct access keys and LED
displays, helps you use all the parameters in 3P3W
or 3P4W LV installation.
It can be used as a data gathering device for an
intelligent Power Distribution System or Plant
Automation System.
All monitored data is available via a digital RS485
communication port running Modbus-RTU Protocol.
Ethernet communication are also options.
BJ-194Z is a high-end multifunction power meter
manufactured by Blue Jay. It is the ideal choice for
monitoring and controlling of power distribution
systems. With its four direct access keys and LCD
displays, helps you use all the parameters in 3P3W
or 3P4W LV installation.
It can be used as a data gathering device for an
intelligent Power Distribution System or Plant
Automation System.
All monitored data is available via a digital RS485
communication port running Modbus-RTU Protocol.
Ethernet communication are also options.
.1 Description
DEM8900-1/DEM8900-2/DEM8900-3 (short form for DEM8900) is designed by adopting the updated microprocessor and digital signal processing technology, which can be applied for monitoring the electrical system. DEM8900 can measure and analyze the real time electrical parameters, such as I,kWh,kvarh., Meanwhile, DEM8900 has functions of multi-tariff,RS485 communication ( MODBUS protocol),analog output, remote input and electrical pulse output.
All our instruments fulfill all important requirements and regulations concerning electromagnetic compatibility and safety isolation (IEC61000, IEC1010 standard and EN61010 standard). The devices have been developed, manufactured, and tested in accordance with Quality Assurance System ISO 9001.
1.2 Measured parameters
Note 1. DEM8900-1 measure current, active energy, active power (optional, with analog output)
2. DEM8900-2 measure current, reactive energy, reactive power (optional, with analog output)
3. DEM8900-3 measure Current, active energy, reactive energy, active/reactive power (optional, with analog output)
1.3 EMC and Safety standard
IEC61000-4-2 (GB/T17626.2)
IEC61000-4-8 (GB/T17626.8)
IEC61000-4-4 (GB/T17626.4)
IEC61010-1 (GB/T4793.1).
1.Product Profile
QAM8300-1M power quality analyzer is an integrated monitoring, analyzing and controlling device that offers electrical parameter metering, harmonics metering and analysis, waveform sampling, measurement of Voltage swell, dip, interrupt, Voltage unbalanced ratio, fault record, event record, data record. QAM8300-1M can monitor and detect if the power quality fulfills IEC and EN standard. With its powerful I/O functions with exterior device, QAM8300-1M can perform harmonic control, PF adjustment, and demand monitoring functions.
QAM8300-1M fulfils all the important requirements of IEC 61000-4-30 Class A standard.
QAM8300-1M can work with our power quality monitoring and management software to provide energy management solutions for enterprises. With its strong networking capability, QAM8300-1M can display and record all the data records on the interactive trend chart. A data report can be formed periodically. The report can be used for fault analysis, statistics, real time monitoring purpose.
QAM8300-1M fulfills IEC61000-4-30 A: 2003,IEC61000-4-15:2003,IEC61000-4-7:2002,EN50160,2004 etc standards.
2.Measurement Accuracy
U, I: 0.1%
U, I peak value, peak factor, flicker: 0.5%
3 phase Voltage unbalanced ratio: 0.2%
3 phase Current unbalanced ratio: 0.5% Frequency: 0 .002Hz
Power factor: 0 .002
Power: 0.2%
Energy: Active energy 0.2% IEC60687:1992(GB/T17883-1999) Reactive energy 0.2% IEC61268(1995) (GB/T17882-1999)
Harmonics: IEC61000-4-30 class A Interharmonics: IEC 61000-4-30 class A Harmonic distortion rate: 2.5%
3.EMC and safety test
EN61326-1 EN61000-4-2/3/4/5/12
IEC/EN61010-2001.
CPM-12D is a din rail mounting multifunction power meter with high accuracy measurement for single phase and three-phase system.
Measuring all basic parameters ; V, I, P, Q, kWh, kVarh etc..
1 RS485 Modbus RTU communication port as default,
LCD display in front panel with buttons for programming.
Auto wiring change (see remark as below) via software
CE and FCC approved
Remark: Auto wiring change have certain condition limit, please refer to operation manual for further details.
 Applications
Energy management system
Factory automation
Intelligent power panel
Industrial automation
Power Grid automation
Community power monitoring
Intelligent green building
FU2200A digital Ethernet power meter with data logger is a three-phase multifunction power and energy meter manufactured by GFUVE. It provides excellent value for monitoring power and energy management systems. It may be used as data gathering devices for intelligent power distribution or plant automation systems. All monitored data is available via a standard digital RS485 communication port, which is based on the Modbus RTU protocol.
FU2200A Ethernet power meter has the PC software and the data logger function, which can set by end users from 1min to 60min intervals to record. You can read the data through a PC. Also, you can share the data in the Internet LAN. By the way, it can measure the harmonics. Back of power meter FU2200A with Ethernet port.
I. The Brief Introduction. Panel mount digital energy meter LCD multi-function power meter with power pulse output RS485, DI DO analog output function. Panel mount digital energy meter LCD multi-function power meter with power pulse output RS485, DI DO analog output function is one multifunctional instrument with measurement, display, digital communication and input, output, etc function. It can measure multiple electrical parameters such as current, voltage, power, electric energy, frequency and power factor in the power grid. With power pulse output and RS485 communication function. With large screen LCD screen.
There are a variety of extension functions to choose from. Four-way discrete input; Four-way discrete output; Four-way variable output. LCD multifunctional power meter has high performance-price ratio, can replace traditional multiple measuring instruments, convenient field wiring, and improve system reliability. Modbus communication protocol for easy computer programming or reading data. Widely used in a variety of power distribution, metering and various power collection, transmission systems.
II.Functional module, LCD multi-function power meter with power pulse output and RS485 communication function, large screen LCD display meter
*Communication interface: standard 1 way RS-485 communication, Modbus-RTU protocol, baud rate: 9600bps.
*Discrete output: support 4 way relay outputs, capacity: AC250V/5A, DC30V/5A.
*Discrete input: support 4 way dry node inputs.
*Transmission output: support 4 way simulation outputs, 4-20mA/0-20mA or 0-5/0-10V.
*Power pulse output, 1 way active energy, 1 way reactive energy pulse output, constant: 3200imp.
APM-96Q Multifunction Meter With RS485 by Blue Jay is a premium panel mounting power analyzer with advanced features and precise measurement accuracy. with a user-friendly interface and four direct access keys, it is easy to use for 3P3W or 3P4W low voltage (LV) installations. APM-96Q multi-function power meter also has a digital RS485 communication port that uses the Modbus Protocol to transmit monitoring data.
APM-96Q multi-function power meter gathers data for intelligent power distribution or plant automation. It measures harmonics and records multi-tariff data for accounting purposes. It monitors up to 63th harmonic for a clear understanding of electrical grid quality.
Feature:
Class 0.5s for basic power parameter, according to IEC62053-22 standard
Class 0.5s for active energy (kWh), Class 1.0s for reactive energy (kVarh),
Panel mounting size: 96*96mm
ITF technology: galvanic insulation protection for inputs and outputs
Colorful TFT screen display with English characters
Provides THD and 2-63th harmonic individual monitoring with bar graph display
Records multi-tariff energy data
Displays three-phase current and voltage waveforms
Monitoring of Max demand, Grid unbalance, Voltage, and Current deviation.
Voltage drop and flicker monitoring and recording
5 virtual alarms for event tracing
Max 50 SOE records and waveform capture for fault tracing
Optional 128MB memory for logging basic electrical parameters
Optional 3 AO ports for electricity transmitter
Optional 2 DO ports for remote control
Optional 4 DI ports for data collection
Our power cords are engineered for reliability and versatility available in both standard and customized configurations to meet your specific power needs Choose from 2pin and 3pin options to ensure compatibility with a wide range of devices and applications
Key Features
Versatile Pin Options Available in 2pin and 3pin configurations to accommodate various devices and power requirements
Standard Options Premade power cords in commonly used lengths eg 1m 2m 3m for quick and easy deployment
Customized Solutions Tailor your power cord to your exact specifications including length pin configuration and cable color
HighQuality Materials Constructed from durable flameretardant materials to ensure safety and longevity
Safety Certifications Compliant with international safety standards providing peace of mind for users
Flexible Design The flexible cable design allows for easy routing in tight spaces while maintaining durability
Wide Application Range Suitable for home appliances industrial equipment computers and more
Key Advantages
Enhanced Compatibility Ensures reliable connections for a variety of devices reducing the risk of power issues
Customization Options Meet unique requirements by choosing the length pin type and other specifications tailored to your needs
Durable and Safe Built to withstand everyday wear and tear with safety features that protect against overheating and electrical faults
Convenient Lengths Options for different lengths help you manage space efficiently whether at home or in the workplace
CostEffective Solution Highquality materials and customization options provide excellent value and longevity minimizing the need for replacements
Whether you need a standard power cord for everyday use or a customized solution for a specific application weve got you covered Contact us today to find the perfect power cord for your needs
118102 Multifunction Power Meter Suppliers
Short on time? Let Multifunction Power Meter sellers contact you.
