Cat. No : 601430050. Truenat COVID-19 Chip-based Real Time PCR Test is a semi quantitative detection of SARS CoV-2 RNA in human oropharyngeal and nasopharyngeal swab specimen and aids in detection and confirmation of SARS CoV-2 infection and diagnosis of COVID-19. The test detects the E and Orf1a genes of the virus. Providing you the best range of Molbio Trueprep Auto Universal Cartridge Based Sample Prep Device, Molbio Trueprep AUTO Universal Cartridge Based Sample Prep Kit, Molbio Trueprep AUTO MTB Sample Pre Treatment Pack Kit, Molbio Trueprep AUTO Universal Sample Pre-treatment Pack and Molbio Trueprep AUTO Transport Medium for Swab Specimen Pack with effective & timely delivery.
COVID-19 Chip-based Real Time PCR Test is a semi quantitative detection of RNA in human oropharyngeal and nasopharyngeal swab specimen and aids in detection and confirmation of infection and diagnosis of COVID-19. The test detects the E and Orf1a genes of the virus.
EXTRUPLUS P1 (POTATO BASED) is a Physically modified, Clean-Label, Gluten free, Plant based, Vegan and Non GMO starch. EXTRUPLUS P1 (POTATO BASED) is used as a perfect additive for Extruded & Oil Fried Snacks, Papad , Pasta and Noodles etc. EXTRUPLUS P1 (POTATO BASED) has no preservative and no Mono sodium Glutamate. FEATURES AND BENEFITS: ï?· Helps to reduce cooking time. ï?· Reducing oil consumption. ï?· Improves Crispiness ï?· Improves Expansion & Volume ï?· Improves texture. ï?· Enhance product's flavor. ï?· 100% Natural and 100% vegetarian product APPLICATION: *EXTRUPLUS P1(POTATO BASED) can be used in all type of extruded products like corn puffs, veggie straw snacks, pork rinds, cheese snacks (puffs and curls), Tortilla/Tostada Chips. *EXTRUPLUS P1(POTATO BASED) is also suitable for Bajji Bonda Mix. *EXTRUPLUS P1(POTATO BASED) can be applied for Pasta and Noodles. *Replace 2-5 % of rice flour with EXTRUPLUS P1(POTATO BASED) and add at the time of blending, after adding all raw materials. DOSAGE For excellent results, use 2-5% EXTRUPLUS P1(POTATO BASED) of total batch size.
Taste-In is a Physically Modified starch, Vegan, Gluten-Free, Plant-based, Non-GMO starch. It is produced by Physical modification of starch to enhance its properties. It is used as functional food ingredient and non- meat extender to enhance the textural properties, water holding capacity and freeze thaw stability of frozen veg/meat products such as Sausage, Ham, Meat balls, Nuggets, Burger Patties, Veg patties, Veg Cutlet, Cheese bites, Vegan and Plant based Sausage, Meatless meat balls, etc., In RTC Veg Products: Taste-InTM can also be used as extender in RTC vegetable products to enhance the texture and preventing syneresis. It also provides excellent freeze-thaw stability to the product without affecting the original texture and taste of the product. ï?· It can be used in Veg Products such as Veg cutlet, Veg patties, cheese bites, finer chips, Mashed potato snacks, veg balls, Veg nuggets, veg fingers ï?· It can also be used in Vegan and Plant based sausages, meatless meat balls, etc., where it mimics the texture of meat and enhances the texture and mouth feel of the product DOSAGE Use 10 to 15% Taste-InTM of total batch size. For excellent results, use upto 20% Taste-In of total batch size.
DATA SHEET FOR EPOXY EPOXY COATING :- INTRODUCTION - EPOXY COATING (HYB) is a two part high solids solvent free epoxy phenolic resin based coating system designed for hard wearing, smooth surface finish for floors, walls and on steel structures. Nonskid surface finish can be achieved on floor, if required. FEATURES: 1) Hard Wearing 2) Non Dusting 3) Excellent Surface Finish 4) Non Smelling 5) Good Aesthetics 6) Highly Chemical Resistant APPLICATION: 1.Stir well before mixing Part A and Part B and mix in the prescribed ratio. 2.Apply one coat of EPOXY primer on the clean and dry surface. 3.EPOXY COATING (HYB) should be applied on the surface by brush or roller within 24 hrs. After application of primer coat it should be allowed to air dry for min. 4 hrs. Preferable in a dust free atmosphere. 4.Apply min. 2 coats with the intercoat interval of 6-8 hrs. PRODUCT SPECIFICATIONS: Application - Brush, Roller Mixing Ratio - As Directed on Packing Port Life - 30 Mins. Drying Time - Touch Dry- 30 Min, Hard Dry 6 Hrs. - Intercoat Interval 6-8 Hrs. Min. - Dry Film Thickness 125-150 Microns/per coat - depending on porosity Covering Capacity - 6-8 sq.met/kg per coat depending on porosity, roughness & method of application. Color Shades - All Standard Shades RECOMMENDED USES: 1) Food & Pharmaceutical 2) Work Shop 3) Clean Room Application 4) Chemical Resistant Coating for Concrete& Steel 5) Petrochemical, Fertilizer plants METHOD OF APPLICATION: SURFACE PREPARATION The long-term durability of the applied Epoxy coating (HYB) epoxy coating is dependent on the adhesion between sub-base and coating material. It is most important therefore, that the substrate surfaces are correctly prepared prior to application. 1.Before application of the Epoxy coating (HYB) surface should be free from loose partials, rust, oils, grease or earlier coatings and should be totally dry. 2.New concrete or cementations surface should be placed at least 28 days and have a moisture content of less than 5% before application of Epoxy coating (HYB) 3.After surface is dry, all repair work like sealing of joints, cracks filling of cavities and crevices should be carried out. HEALTH & SAFETY - Keep the containers tightly closed when not in use. Avoid contact with skin & eyes. It comes in contact with the body, wash affected parts with plenty of water and contact a doctor. Other known sector for Epoxy floor lining, Epoxy garage floor lining, Concrete epoxy lining, Concrete floor epoxy lining, Epoxy pipe lining, Marine epoxy lining, Sub marine epoxy lining, Basement lining epoxy floor shield, Louisiana, Oregon, Chip lining color epoxy floor, Aviation lining epoxy interior.
Product Description : The PaxView COVID -19 real-time RT-PCR Kit detects the novel coronavirus, COVID-19 using one-step real-time RT-PCR in a single tube intended for in vitro diagnostic use. The target genes for the detecton of the virus are Orf1ab and N gene. The sequence of primers and probes for the amplification were adapted from sources published by China CDC and WHO. The kit includes primers and probe set targeting the human RNase P gene that serves as an internal positive control for the real-time RT-PCR. Price of product ( USD price or FOB price) : 1no testing 20 USD 1kit testing = 96no testing 1kit = 96no * 24 USD = 2208 USD (base on Qty negociable) Product origin ; korea Key Specifications/Special Features : 1. with in 3hour testing result in come 2. One item 96person can check 3. 100% correct result coming then other method 4. It is same process in korea Minimum Order Size and Packgaing details : 50kit in box 500 x 460 x350 6kg MOQ : 500
RT PCR-Detection Kit
Basmati & non basmati rice: 1121 raw basmati, 1121 steam basmati, 1121 white sella basmati, 1121 golden sella basmati, 1509 steam, 1509 sella, 1509 golden sella, 1401 steam, 1401 sella, 1401 golden sella, pusa, sugandha rice, sharbati, ir 64 parboiled. fmcg: confectionaries, biscuits, potato chips, beverages, grocery items, canned fish, edible oil, palm oil, personal care products. food ingredient: food color, food flavor, caramel, soya lecithin, spice oils & oleoresins, polyglycerol polyricinoleate (pgpr). power : diesel generator, sine wave inverter, solar inverter, mppt inverters, tall tubular batteries, smf batteries. automotive batteries: 2 wheeler batteries, 3 wheeler batteries, car batteries, truck batteries. tyre: bicycle tyres, 2 wheeler tyres, 3w tyres, car tyres, suv tyres, truck & bus bias & radial tyres, tractor tyre, otr tyres. adhesive/ glue: wood adhesive, industrial adhesive, solvent based adhesive, sprayable adhesive, contact adhesive. corn starch..
COVID-19 RT-PCR TEST - NO RNA PURIFICATION NEEDED! Results in less than 60 minutes, very easy-to-use. Made in USA, with clinical validations all over the world. FDA-EUA approved and CE cleared.
Our test kit has been approved and endorsed by Singapore's MOH (Ministry of Health) and HSA (Health Science Authority) since last year and we have been constantly supplying to the APAC countries during this period. (Japan, India, Singapore, Malaysia, Indonesia and etc.) * CE mark was attained in December 2020. * Our Tepat 1.0 SARS-CoV-2 RT-PCR provides for high-throughput, sensitive and specific detection of SARS-CoV-2 RNA extracted from nasopharyngeal swabs*. It can detect 6 copies of viral RNA per reaction with > 95% confidence. Clinical validation shows 100% sensitivity, with no cross-reaction with non-SARS-CoV-2 species. Key Highlights 1.5 hours from RNA to results Multiplex RdRp and M viral genes detection enhances sensitivity and specificity 100% coverage with 100% identity of all SARS-CoV-2 genomes in the world Detects 6 copies of viral RNA Whole process control: human RNase P
The COVID-19 RT-PCR Detection Kit is a real-time RT-PCR test intended for the qualitative detection of nucleic acid from the SARS-CoV-2 in upper and lower respiratory specimens (such as anterior nasal swabs, mid-turbinate nasal swabs, nasopharyngeal swabs, oropharyngeal swabs, sputum, lower respiratory tract aspirates, bronchoalveolar lavage, and nasopharyngeal wash/aspirate or nasal aspirate) from individuals suspected of COVID-19 by their healthcare provider. Testing is limited to laboratories certified under the Clinical Laboratory Improvement Amendments (CLIA) of 1988, 42 U.S.C. 263a, to perform high complexity tests. Results are for the identification of SARS-CoV-2 RNA. The SARS-CoV-2 RNA is generally detectable in upper and lower respiratory specimens during the acute phase of infection. Positive results are indicative of the presence of SARS-CoV-2 RNA; clinical correlation with patient history and other diagnostic information is necessary to determine patient infective status. The agent detected may not be the definite cause of disease. Positive results do not rule out bacterial co-infection with other viruses. Laboratories within the United States and its territories are required to report all positive results to the appropriate public health authorities. Negative results do not preclude SARS-CoV-2 infection and should not be used as the sole basis for patient management decisions. Negative results must be combined with clinical observations, patient history, and epidemiological information. The COVID-19 RT-PCR Detection Kit is intended for use by qualified trained clinical laboratory personnel specifically instructed and trained in the techniques of real-time PCR and in vitro diagnostic procedures. The COVID-19 RT-PCR Detection Kit is only for use under the Food and Drug Administration's Emergency Use Authorization. PRINCIPLE OF DETECTION This product is a fluorescent probe-based Taqman RT-PCR assay system. Firstly, the RNA of SARS-CoV-2 will be reverse transcribed into cDNA by reverse transcriptase, and then PCR amplification will be performed with cDNA as template. During amplification of the template, the TaqMan probe will be degraded due to the 5'-3 polymerase activity and exonuclease activity of Taq DNA polymerase, then the separation of fluorescent reporter and quencher enables the fluorescent signal to be detected by instrument. The ORF1ab gene of SARS-CoV-2 will be detected qualitatively by FAM channel, the N gene of SARS-CoV-2 will be detected qualitatively by JOE channel, the E gene of SARS-CoV-2 will be detected qualitatively by ROX channel, and the internal reference will be detected by CY5 channel. dUTP and UNG enzyme are used in the kit to prevent contamination of the amplified products. Internal reference is used in the kit for quality control starting from sample collection
Indication: Qualitative detection of nucleic acid from SARS-CoV-2 in upper and lower respiratory specimens (such as anterior nasal swabs, mid-turbinate nasal swabs, nasopharyngeal swabs, oropharyngeal swabs, sputum, lower respiratory tract aspirates, bronchoalveolar lavage, and nasopharyngeal wash/aspirate or nasal aspirate) from individuals suspected of COVID-19 by their healthcare provider. Emergency use of this test is limited to authorized laboratories. Authorized Laboratories: Laboratories certified under the Clinical Laboratory Improvement Amendments of 1988 (CLIA), 42 U.S.C. 263a, to perform high complexity tests. This letter is in response to your1 request that the Food and Drug Administration (FDA) issue an Emergency Use Authorization (EUA) for emergency use of your product,2 pursuant to Section 564 of the Federal Food, Drug, and Cosmetic Act (the Act) (21 U.S.C. 360bbb-3). On February 4, 2020, pursuant to Section 564(b)(1)(C) of the Act, the Secretary of the Department of Health and Human Services (HHS) determined that there is a public health emergency that has a significant potential to affect national security or the health and security of United States citizens living abroad, and that involves the virus that causes COVID-19. Pursuant to Section 564 of the Act, and on the basis of such determination, the Secretary of HHS then declared that circumstances exist justifying the authorization of emergency use of in vitro diagnostics for detection and/or diagnosis of the virus that causes COVID-19 subject to the terms of any authorization issued under Section 564(a) of the Act. Having concluded that the criteria for issuance of this authorization under Section 564(c) of the Act are met, I am authorizing the emergency use of your product, described in the Scope of Authorization of this letter (Section II), subject to the terms of this authorization. I. Criteria for Issuance of Authorization I have concluded that the emergency use of your product meets the criteria for issuance of an authorization under Section 564(c) of the Act, because I have concluded that: 1. The SARS-CoV-2 can cause a serious or life-threatening disease or condition, including severe respiratory illness, to humans infected by this virus; 2. Based on the totality of scientific evidence available to FDA, it is reasonable to believe that your product may be effective in diagnosing COVID-19, and that the known and potential benefits of your product when used for diagnosing COVID-19, outweigh the known and potential risks of your product; and, 3. There is no adequate, approved, and available alternative to the emergency use of your product. 4 II. Scope of Authorization I have concluded, pursuant to Section 564(d)(1) of the Act, that the scope of this authorization is limited to the indication above.
Commodity: Covid-19 RT-PCR Detection Kit Spec.96 tests/kit Price:FOB SHANGHAI USD3.30/test, USD316.8/kit $3.60/TEST CIF NY AIRPORT OR OTHER MAJOR AIRPORTS USA OR EUROPE OR S. AMERICA OR MIDDLE EAST Payment: T/T ADVANCE 50% BALANCE BEFORE DEPARTURE OR Sight Irrevocable TRANSFERABLE LC Delivery: By AIR, 50days after receipt and confirmation of LC
Sample Types : Including Nasopharyngeal swab, Oropharyngeal swab, Sputum Controls : Internal control, UNG enzyme and dUTP used to reduce risk of contamination, false positive and false negative results Product Information Upper and lower respiratory specimens such as anterior nasal swabs, mid-turbinate nasal swabs, nasopharyngeal swabs, oropharyngeal swabs, sputum, lower respiratory tract aspirates, bronchoalveolar lavage, and nasopharyngeal wash/aspirate or nasal aspirate. Authorized Laboratories Laboratories certified under the Clinical Laboratory Improvement Amendments of 1988 (CLIA), 42 U.S.C. 263a, to perform high complexity tests. About Emergency Use Authorization (EUA) This test (1) has not been FDA cleared or approved, (2) has been authorized by FDA under an EUA for use by authorized laboratories, (3) has been authorized only for the detection of nucleic acid from SARS-CoV-2, not for any other viruses or pathogens, and (4) is only authorized for the duration of the declaration that circumstances exist justifying the authorization of emergency use of in vitro diagnostics for detection and/or diagnosis of COVID-19 under Section 564(b)(1) of the Act, 21 U.S.C.360bbb-3(b)(1), unless the authorization is terminated or revoked sooner.
What is PET Open Agent Film Chips? PET Open Agent Film Chips are plastic chips made of polyethylene terephthalate (PET) that contain an open agent, which helps to improve the adhesion of inks and coatings to the surface of the film. It is uniformly depressed anti-adhesive, with excellent film-forming properties; polymerization of continuous device production makes the quality high and stable. As an opening agent to be used with film grade base materials to produce various types of films. It can be used in films with special requirement for optical and surface properties or ultra-films below 8u. Can be used directly in foodstuffs after FDA approval.
What is PET Open Agent Film Chips? PET Open Agent Film Chips are plastic chips made of polyethylene terephthalate (PET) that contain an open agent, which helps to improve the adhesion of inks and coatings to the surface of the film. It is uniformly depressed anti-adhesive, with excellent film-forming properties; polymerization of continuous device production makes the quality high and stable. As an opening agent to be used with film grade base materials to produce various types of films. It can be used in films with special requirement for optical and surface properties or ultra-films below 8u. Can be used directly in foodstuffs after FDA approval.
The COVID-19 RT-PCRT est is a real-time reverse transcription polymerase chain reaction (rRT -PCR) test. The test can be run in a singleplex format (three individual assays) or multiplexed into a single reaction and amplification set up.
RTPCR testing kits are used for testing golden test processes to detect Covid19 viruses in patients.
PropylParaben, also called propyl p-hydroxybenzoate, E216, CAS no.94-13-3, the manufacturing process via Paraben. Propylparaben is one of a family of preservatives known as parabens, the compounds of parahydroxybenzoic acid. Function: preventing the growth of fungi. It is used as a preservative in water-based cosmetics, such as creams, lotions, shampoos and bath products. PropylParaben often used as a preservative and anti-fungal agent to prevent molding and to provide a much longer shelf life to chips, jams, jellies in food application. As an experienced PropylParaben manufacturer and supplier, we has been supplying and exporting PropylParaben for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day. PropylParaben powder food grade Specification ITEM SPECIFICATIONS Characters White crystalline powder Purity (on dry base) % 98.0-102.0 Acidity (PH) 4.0-7.0 Melting point (C) 96-99 Sulfate (SO42-) 300 ppm Residue on Ignition (%) 0.10 Completeness of solution Clear and transparent Organic volatile impurities 0.5 Loss on Drying (%) 0.5