Applicable Standards Design standard: BS5155, EN593, API609 Flange standard: BS EN1092-2 Top flange standard: ISO5211 Face to face standard: BS EN558-1 Pressure test standard: BS EN12266-1, API598 Features and Benefits Wider EPDM seat, replaceable, its suit for different type of flanges. ISO5211 standard top flange, suit for different operations. Eccentric pin on the stem, not destroy stem structure, make sure the safety. Temperature overload protection. Free switch between hand and electric. IP67 protection level. Both ON/OFF type and Regulating type actuator available. Technical Data Nominal diameter: DN50~DN600(2"~24") Nominal pressure: PN16 Working temperature: -5C ~ +85C Sealing test: 1.1PN Shell test: 1.5PN Suitable for: Water, ethylene glycol, non correction medium, etc. Power supply voltage: 220V Protection level: IP67 Environment temperature: -5C ~ 70C Working environment: No corrosive flammable medium, no explosive medium
Features and Benefits Wider EPDM seat, replaceable, its suit for different type of flanges. ISO5211 standard top flange, suit for different operations. Eccentric pin on the stem, not destroy stem structure, make sure the safety. Temperature overload protection. Free switch between hand and electric. IP67 protection level. Both ON/OFF type and Regulating type actuator available. Applicable Standards Design standard: BS5155, EN593, API609 Flange standard: BS EN1092-2 Top flange standard: ISO5211 Face to face standard: BS EN558-1 Pressure test standard: BS EN12266-1, API598 Technical Data Nominal diameter: DN50~DN600(2"~24") Nominal pressure: PN16 Working temperature: -5C ~ +85C Sealing test: 1.1PN Shell test: 1.5PN Suitable for: Water, ethylene glycol, non correction medium, etc. Power supply voltage: 220V Protection level: IP67 Environment temperature: -5 C ~ 70 C Working environment: No corrosive flammable medium, no explosive medium
Features and Benefits Vulcanized EPDM seat. Streamlined SS304 disc, corrosion resistant. ISO5211 standard top flange, suit for different operations. Electrostatically applied Akzo Nobel epoxy powder internally and externally. Temperature overload protection Free switch between hand and electric. IP67 level protection Applicable Standards Design standard: BS5155, EN593, API609 Flange standard: BS EN1092-2 Top flange standard: ISO5211 Face to face standard: BS EN558-1 Pressure test standard: BS EN12266-1, API598
Gate Valves Wafer Valves Knife gate valves Non-return valves Pressure relief valves Actuators Positioners
Ball Valves Screwed / Socket Weld / Butt-weld / Flanged Ends : Ball valves are designed and manufactured to provide maximum service life and dependability. Three Piece and Two Piece design Ball Valves ensure efficiency, reliability and economy. Pneumatic Operated Ball Valves and Electrical Actuated Ball Valves are maintenance friendly and suitable for on-line maintenance . Butterfly Valves High Performance Butterfly Valve 150LB/300LB/600LB ,wafer type with integrally moulded elastomeric body sleeve are designed for longer life and trouble free performance. Gate Valves ATSIPL distributes a full line of Gate Valves, including Wedge Gate Valves, Knife Gate Valves, Lined Gate Valves, Resilient Seated Gate Valves and more. Gate Valves are available from 1/2â?³ through 24â?³ and larger in various material options.
Mini electric actuator 12v, mini electric actuator 12v for ball valve and butterfly valve 1). CNC manufactured 2). Custom made 3). Withstand voltage:1500V 4).IP code:IP67 Electric Actuators: 24V DC, 24V AC, 110V AC,220V AC NEMA 4 and NEMA 7 enclosures Manual override Visual indicator
Product :C.I. Butterfly Valve with Electric Actuator Type of Pattern : Water Type Pressure/Class/Rating : PN 10/PN 16 Body Material Cum Standard : CI to IS:210 Gr FG200 Type of Lining : EPDM Type of Disc : SS CF 8 Stem : AISI-410 End Details : Suitable insertion between flanges as ASME B 16.1 or Class-125 Testing & Certification Ratings: PN10 Body Test Pressure : 1.5MPa (218 Psig) Hyd Seat Test Pressure : 1.1MPa (160 Psig) Hyd PN16 Body Test Pressure : 2.4MPa (348 Psig) Hyd Seat Test Pressure : 1.8MPa (261 Psig) Hyd
Micro silica (silica fume), silica, fly ash, pozzolano, ggbfs and white cement, other cementatious materials and factory/plants specialized spare parts & equipments, automation & switchgear, drives & transmission spares, instrumentation & pump, pneumatic & hydraulic spares, valves & actuators, mechanical parts, high carbon ferro chrome, foundry pig iron, iron ore concentrate, chromite ore, antimony ore, silicon metal 441 (powder), ferro silicon (fesi), iron ore pellet, copper concentrate.
12v 24v 110v 220v 380v electric actuated motorized PVC butterfly valve PVC FRPP, PPR Butterfly Valve Series according to DIN, ANSI, JIS, CNS, Standard with Specification DN50-DN500 ( 2"- 20" ) Working Pressure from DN50 to DN 200 ( 2"- 8" ) PN10 and DN200 ( 8" ), DN250 ( 10" ), DN300 ( 12" ) PN6; Pneumatic Butterfly Valve: Basic Type (Switch Type): Installed Pneumatic Butterfly Valve Actuators Optional: Electromagnetic Valve (Single, Dual DC, AC 24V, 110V, 220V) All Switch, Joint Pieces of Gas Source, Regulatory Locator Configuration as the User's Request 1. PVC Butterfly Valve ( Lever ) DIN, ANSI, JIS, CNS Standard with Carbon Steel Stem #45 & EPDM Rubber. 2. PVC Butterfly Valve ( Lever ) DIN, ANSI, JIS, CNS Standard with Stainless Steel Stem # 420 & EPDM Rubber. 3. PVC Butterfly Valve ( Lever ) DIN, ANSI, JIS, CNS Standard with Stainless Steel Stem # 304 & EPDM Rubber 4. PVC Butterfly Valve ( Lever ) DIN, ANSI, JIS, CNS Standard with Stainless Steel Stem # 304 & FPM / VITON Rubber. 5. FF-PP / PP-G Butterfly Valve ( Lever ) DIN, ANSI, JIS, CNS Standard with Carbon Stem #45 & EPDM Rubber. 6. FF-PP / PP-G Butterfly Valve ( Lever ) DIN, ANSI, JIS, CNS Standard with Stainless Steel Stem # 420 & EPDM Rubber. 7. FR-PP / PP-G Butterfly Valve ( Lever ) DIN, ANSI, JIS, CNS Standard with Stainless Steel Stem # 304 & EPDM Rubber. 8. FR-PP / PP-G Butterfly Valve ( Lever ) DIN, ANSI, JIS, CNS Standard with Stainless Steel Stem # 304 & FPM / VITON Rubber. 9. PP-R Butterfly Valve ( Lever ) DIN, ANSI, JIS, CNS Standard with Carbon Stem #45 Actuator Features: Pneumatic Actuators: Rack and pinion Actuator Design Spring return or double acting Open and closed adjustment stops True NAMUR accessory mounting Visual indicator Electric Actuators: 24V DC, 24V AC, 110V AC,220V AC NEMA 4 and NEMA 7 enclosures Manual override Visual indicator
Working environments: Temperature: -30'c~+70'c(can be customized to -45'c~+85'c) Relatively humidity: 95%(25'c) Pressure: 86kpa~106kpa Power supply: Single phase: 220v 50hz three phase:380v 50hz Tolerance: single phase voltage(-15%/+10%) three phase voltage(¡¨¤10%) Frequency(¡¨¤5%), harmonic content (
1the input signal: 4--20ma dc 2the input resistance: 250 ohm 3input passage: 14 basic error: 1%, 2.5% 5deviation: 1.5% 6deadline: 0.5%--3% continuously adjustable (according to the indication of system) 7damping characteristic: no-oscillating 8power supply: three-phase 380v50hz, single-phase 220v50hz for selected 9working conditions: temperature: integral-type -10-- +55, separate-type -25 -- +70 Humidity: 85%the surrounding air does not have the corrosive elements 10protection rank: it conforms to the iec145 ip65 standards. (excluding the separate-type gamx with waterproofing and dustproof functions fixed in rooms), bus type and intelligent type ip67. 11the cut-off signal protection: it can be divided into all-on, all-off and home position according to your instructions. Generally it is set into the home position when it is manufactured. Wooden case
Powerdc12vdc24vdc220vac24vac110vac220vac380v Rated current4.8a2.4a0.32a3a0.64a0.24a0.19a Input signal4-20 ma dc/ 0-10 ma dc Output signal4-20 ma dc/ 0-10 ma dc Basic error±2.5% Deviation?¤1.5% Dead zone0.5%-3% (can ajust as requirements) Damping characteristic no swing Supply voltagek: 220v. Ac 50hz Connection typeflanged directly Connection typehorizontal(foot) type Temperatureintegrated type:-10??+55°c Humidity?¤85%, excluding corrosion medium in ambient air Protection classip67 Protection of signal interruptionfully-closed or remain original position Rotary angle0-90° Installation angleany angle Case materialaluminium die-casting components Optional functionoverload protection, heater
The valve body and disc is all adopted QT450-10 material, the ball rate is above grade 3, the mechanical performance is fully up to standard, the tensile strength is 450Mpa, and the elongation rate is more than 10%. It is not easy to crack or freeze. The valve body is solid body, the same caliber weight is heavier than others. Seat uses standard EPDM rubber, making the butterfly valve's resilience and tension super stable and reliable, opening and closing more than 10,000 times without leakage. The valve body uses an electrostatic powder thermal spraying process with a spray thickness of 250μm. The valve body is heated at 200°C for 3 hours, and the powder is cured at 180°C for 2 hours. After natural cooling, the surface adhesion is increased by 2 times than that of the ordinary powder, making it more environmentally friendly and weatherproof. Higher, to ensure that the valve body is not discolored for 36 months.
CE certificate Material: Aluminium alloy. Torque: 100Nm, 200Nm, 400Nm, 600Nm. Bottom connection size: 100Nm--14-F05/F07£¬200Nm--22-F07/F10£¬400Nm and 600Nm--22-F07/F10. 90operational time:15s, 30s, 45s ,60s, Voltage: DC24V, AC24V, AC110V, AC220V, AC380V. Operational Angle Range: 100Nm--Adjustable from 0 to 360. Above 100Nm--Adjustable from 0 to 90, Control Circuit: T Series, modulating circuits. Weight: 4.5kg to 9kg. Enclosure Rating: IP65. Mounting Direction: 360 installed at any angle. Ambient Temperature: Minus 30 degrees Celsius to 60 degrees. -30-+ 60. Three-dimensional spherical instructions cover, bracket and coupling, open type base or closed type base are all optional. HT-T series LCD intelligent modulation electric actuator is the perfect combination of integrated PID and electric actuator. With both a variety of functions of PID controller (to control temperature, pressure, pressure, flow, level), and functions of actuators, its simple to design and install, low cost for users. With the standard 4 to 20mA signal channel ,common to be access to temperature, pressure, pressure, flow, level and other sensor, calculated by PID module in the actuator, control the valve switch, feedback the sensor changes a closed regulation loop was formed. HT-T series LCD intelligent modulation electric actuator has a user friendly interface. 1, the user can set the upper and lower limit with 4 ~ 20mA sensing signal corresponding to the indicated value on the field. 2, the user can set the target operating point 3, the scene changes can adjust various parameters of PID controller in order to achieve the best conditioning effect. 4, Switch the Chinese and English menu for the use of different language areas. 5, Switch the manual and automatic function. 6, password to avoid the mistakes of non-professional. 7, optional infrared remote, convenient and comfortable. Non-invasive parameter adjustment. 8, optional bus interface, can access to equipment management system for data exchange and remote configuration.
Size:nw25....Nw1000 mm Pressure:pn6...Pn16 Pneumatic actuator on/off or proportional control 20 pcs
Specifications: Media: Air (dry or lubricated) Non-corrosive gas or light hydraulic oil Construction: Suitable for indoor or outdoor installation Material: Housing - Aluminium Alloy Drive Shaft: Carbon Steel Finish: Yellow Colour Powder Coated Rotation (Standard) Counter clockwise to open with port 'A' pressurised Spring return Actuators air fail to close clockwise Lubrication: Factory lubricated for the normal life of Actuators
Specifications Design Standard : IS/ISO 13095 | API609 | BS5155 Testing Standard : API 598 | IS/ISO 13095 Face to Face : As per IS/ISO 13095 | API609 | BS5155 Pressure Rating : PN 10 | PN 16 End connection : Wafer type | Lug Type | Flanged End Type. Body : CI, SGI/DI, WCB, CF8, CF8M, Super Duplex, etc. Disc : SGI/DI, WCB, CF8, CF8M, Duplex, Nylon Coated, Rubber Coated etc. Seat : EPDM, Nitrile, Viton, Hypalon, Silicon, PTFE etc. Operation : Pneumatically Actuated | Electrically Actuated (Motorized) Actuation Variants Single Phase / 3 Phase / DC Power Options Available, Local Control / Remote Control Options Available, Manual Over Ride for operation in case of Power failure, Valve positioning at intermediate positions, Feedback via Limit Switches & Torque Switches
Couplings, gearbox, valves, pumps, bearings, conveyor systems, pipes & fittings, automation drives electrical items, rtd, cables, switchgears, transformers, measuring instruments, drilling machines. ball valves, gate valves, globe valves, butterfly valves, diaphragm valves, waffle valves, sluice valves, hydraulic valves, pneumatic valves, solenoid valves, bellow seal valves, check valves in stainless steel, ss 304, ss 316, brass, m.s, cast iron, cast steel, pvc, nylon, teflon, ceramic lining valves. fittings: flanges, elbows, tee, couplers, nipples. bearings, v belts, couplings: gear couplings, pin bush couplings,pulleys.Export, clearance, door delivery, import, automations, maintenance, retro fitting, installations
Features:Butterfly Valve with Air Actuator, Spring Return, 6".Keystone Series 221 Butterfly Valves with Keystone Air Actuators. Double acting style (air to open and close). Valves include cast iron bodies, EPDM seats, 316SS stainless discs and 416 stainless stems. Valves are rated to 250 PSI and 250 Deg. F. Air actuators are direct mount (no brackets) and include 1/4" FPT air port connections.Designed to open/close valves at 80 PSI in most applications, 150 PSI maximum. At the same time, we still can offer the items as below: Keystone Air Actuated Butterfly Valve DUA906-30KSR Keystone Air Actuated Butterfly Valve DUA906-20M Keystone Air Actuated Butterfly Valve DUA906-60M Keystone Air Actuated Butterfly Valve DUA906-30M Keystone Air Actuated Butterfly Valve DUA906-40K Keystone Air Actuated Butterfly Valve DUA906-30K Keystone Air Actuated Butterfly Valve DUA906-60KSR Keystone Air Actuated Butterfly Valve DUA906-40KSR Keystone Air Actuated Butterfly Valve DUA906-20KSR
Used to control water temperature in hvac system From dn 40-dn150 Pn 16
