The metering fuel nozzle LLY-25 series is a combination of horizontal screw-wing flow meter and fuel gun. It is a meter instrument used to measure the volume flow rate of liquid (petrol, diesel, engine oil, hydraulic oil, etc.) flowing through the pipeline. In virtue of reliable performance, this metering fuel nozzle LLY-25 is suitable for filling petrol and other light oil products.
Metering fuel nozzle LLY-25 is used for on-farm accounting, both in stationary installations and in ground-based refueling and pumping facilities. It is used as a pistol for refueling in small settlements at gas stations of a local scale.
Technical Parameter
�¢??Conditional pass �¢?? 25 mm
�¢??Working pressure �¢?? 1 MPa
�¢??Permissible error: �?�±1%
�¢??Min.flow �¢?? 25 L/min
�¢??Max flow �¢?? 120 L/min
�¢??Division price �¢?? 1 L
�¢??Max. set dose �¢?? 9999 L
�¢??Operating temperature from -20 to +50
Working Principle
Having roller pointers for a one-time count of the amount of liquid, the gun with a counter serves to count the amount of fuel that has passed through it. Roller disposable pointer crane LLY has a device for setting the readings to zero. Accounting for the amount of liquid that has passed through the counter gun is based on counting the number of revolutions of the drive screw inside the fuel dispenser gun. The flow of the measured fuel, entering the meter and passing through the volume meter, loses part of the pressure to create a torque that causes the screws to rotate. The measurement of the amount of liquid by a pistol with a counter occurs due to the periodic cutting off of certain volumes of it contained in the cavities between the cylindrical bores of the holder and the screws. This device is a combination of the simplest fuel dispenser gun and fuel meter, the accuracy and performance of which are inferior to industrial designs. Pressing the lever opens the valve, fuel flows through the gun. When the faucet lever is released, the valve closes under the action of a spring, blocking the flow of liquid. The adjusting screw is intended for equipment calibration. The drain pipe of the dispensing gun with a counter is used to direct the liquid into the container when refueling.
The metering fuel nozzle LLY-25 is a combination of a screw-wing flow meter and a refueling gun. A metering fuel nozzle is an instrument used to measure the volumetric flow rate of liquids (gasoline, diesel, engine oil, hydraulic oil, etc.) flowing through a pipeline, which can work normally within the pressure range. The metering fuel nozzle can be installed directly on the distribution pipe of the filling barrel of the oil depot for refueling and filling. It has the advantages of small size, lightweight, easy to carry, accurate measurement, etc.
Features:
Our metering fuel nozzle LLY25C has beautiful appearance and simple operation.
It is manual fuel nozzle with mechanical meter.
Suitable for dispensing petrol, kerosene and diesel.
Made of high-quality aluminum alloy, durable, wear-resistant and non-slip design.
FROZEN SUGARCANE ROC 16
Origin: Vietnam
Size: 40-50 cm
Quality fresh sugarcane Peel, Wash Drain , Cut into pieces , Packing , Freezing (-18 degrees C)
*Selected fresh sugarcane:
Sugarcane is grown and cared to ensure no pesticide residue. In addition, sugarcane is selected from 16 sugarcane with high
sweetness.
*Peel:
Sugarcane is shaved off the silk outside before washing
Washing the cane
The cane is washed in a tub with a spray nozzle under
*Cutting into pieces:
Sugarcane is cut into requested format from customers. The length is from 25-50cm
*Packing
Packing of PA or PE bags ensures export qualityFreezing sugarcane
Block sugarcane is frozen at -18 degrees C
SIZE :
1M X 10 M X 10 MM
1M X 10 M X 14 MM
1M X 10 M X 18 MM
1M X 10 M X 25 MM
1M X 10 M X 32 MM
1M X 10 M X 36 MM
LENGTH: 10 METER
COLOR: BROWN NATURAL
MADE FROM: 100% MEDIUM TOLONG FIBER
IMPURITY: 2% MAX
MOISTURE: 15% MAX
PRICE: NEGOTIABLE
PORT LOADING: HO CHI MINH PORT, VIET NAM
PAYMENT TERM: L/C OR T/T
ZHUNDE brand New Pattern Methonal Fuel Nozzle Factory,Fuel Pump Nozzle owns many patents, which is developed by Anhui ruiling metering manufacturing co., ltd's R&D department. It has the advantages of compact struction, easy-use, easy-carry, high accuracy, widely used, simple maintenance etc, it will be your right-hand assistant.
Specification:
Model No.: BJJ-20-R9(Diesel,Petrol,Methanol,Water)
Function: Single flow volume show, accumulated flow volume show, flow no. Change, etc
Show way: LCD display
Material: Aluminum+Stanless steel
Parameter:
Brand: ZHUNDE
Flow meter type: Turbine flow meter (We have patent)
Flow range: 15-60L/min
Accuracy grade: ± 1%
Nominal diameter: DN25mm
Suitable medium: Methanol
Working pressure: 0-4MPa
Working temprature: 10-30°
C
3447 Metering Fuel Nozzle Lly 25 Suppliers
Short on time? Let Metering Fuel Nozzle Lly 25 sellers contact you.
Appearance -Tan fine powder
Odor - Aromatic odor
Density - 430kg to 520kg per cubic meter
Mesh Pattern - 98% pass through 15-hole mesh
Moisture Content - Not more than - 15%
PH Value - 6.0 to 8.0
Optimum pH - Optimum pH is 7
Temperature
Active from 10 C to 65 C Optimum Temperature: 25 C to 65 C
Bacteria Content
10 * 109/g; includes Bacillus subtilis, Bacillus licheniformis, Polymyxa, Aspergillus and Nocardia...,protease ,lipase ,amylase ,cellulase etc enzyme.
Appearance -Tan fine powder
Odor - Aromatic odor
Density - 430kg to 520kg per cubic meter
Mesh Pattern - 98% pass through 15-hole mesh
Moisture Content - Not more than - 15%
PH Value - 6.0 to 8.0
Optimum pH - Optimum pH is 7
Temperature
Active from 10 C to 65C Optimum Temperature: 25 C to 65 C
Bacteria Content
10 * 109/g; includes Bacillus subtilis, Bacillus licheniformis, Polymyxa, Aspergillus and Nocardia...,protease ,lipase ,amylase ,cellulase etc enzyme.
* PURPOSE
customers using FBC boilers (Particularly underbed feed FBC boilers) for the protection of inbed coils against erosion potential by applying highly abrasive resistant refractory on inbed coils above fuel feed system.
BACKGROUND
* Two of such actions are providing special alloy studs on inbed coils and applying highly abrasive resistant refractory on the outer bottom loops of inbed Coils which are above the fuel feed nozzles.
* GANESHAS has taken number of approaches to identify the key factors affecting erosion rates with an objective to enhance the life of inbed tubes as well as implementing the corrective action to reduce the erosion rates.
Phosphate coatings are often used to protect steel parts against rusting and other types of corrosion
* Erosion of inbed coils in fluid bed combustor is unavoidable phenomenon however the rate of metal wastage and thus the life of tubes depends on various factors like ash & fuel properties, design of Combustor / feeding system, flue gas velocities operating conditions etc. It has been also observed that maximum erosion prone inbed coils are those which come above fuel feed nozzles and an area of approximately 1 to 1.5 mts around fuel feed systems are badly affected.
APPLICATION
Phoscast-90 XR can be applied by ramming with wooden mallet having adequately large head @" dia x 5" length x 10â?? Jong handle). The desired lining or repair thickness is built up in several courses while ramming the mass to uniform thickness. Phoscast refractory should never be trawled to obtain smooth surface; ramming only should finish surface. Any excess mass is to be sliced off with trowel edge and then finished by ramming again for bed coil. Tube application of AFBC boiler, the material pasty mass should be finger pressed into the studs of the tube with maximum force. Finish should be given by pressing the hand palm against material applied, using surgical type thin rubber hand gloves.
What's the introduction of micro oval gear flow meter
Micro oval gear low flow meter is a kind of oval gear flow meter , along to positive displacement flow meter. There is thousands of manufacturers who can produce oval gear flow meter. But only several manufacturer who have technology to produce micro liquid flow meter.
Micro oval gear flow meter offer the highest accuracy and measure for various viscosity liquid. Special patent technology to measure flow from 0.1ml/min and ensure working life more 5 years.
Micro oval gear low flow meter is wildly used for various industries for precision measurement. So far it has been serviced for more 100 using condition, such as fuel oil measurement, adhesive control , hydraulic life cycle testing, electrolyte dosing, natural gas odorization.
What's the main features of micro oval gear flow meter
1) anti-dust, anti-vibration, anti-corrosive&explosion-proof.
2) max accuracy up to 0.2%
3) min flow : 0.1ml/min
4) max temperature: 200c
5) max pressure: 1000bar
6) viscosity liquid:0.3~10000cps.
What's the introduction of micro oval gear flow meter
Micro oval gear low flow meter is a kind of oval gear flow meter , along to positive displacement flow meter. There is thousands of manufacturers who can produce oval gear flow meter. But only several manufacturer who have technology to produce micro liquid flow meter.
Micro oval gear flow meter offer the highest accuracy and measure for various viscosity liquid. Special patent technology to measure flow from 0.1ml/min and ensure working life more 5 years.
Micro oval gear low flow meter is wildly used for various industries for precision measurement. So far it has been serviced for more 100 using condition, such as fuel oil measurement, adhesive control , hydraulic life cycle testing, electrolyte dosing, natural gas odorization.
What's the main features of micro oval gear flow meter
1) anti-dust, anti-vibration, anti-corrosive&explosion-proof.
2) max accuracy up to 0.2%
3) min flow : 0.1ml/min
4) max temperature: 200c
5) max pressure: 1000bar
6) viscosity liquid:0.3~10000cps.
The Mercury Verado 250 is a high-performance outboard motor known for its power and reliability. Here are some key specifications:
Engine Type: 4.6L V8
Horsepower: 250 hp
Steering: Digital Throttle & Shift (DTS)
Starter: Electric
Shaft Length: Available in 25" (X-Long) and 30" (XX-Long)
Power Trim & Tilt: Yes
Fuel System: Electronic Fuel Injection (EFI)
Alternator: 115-amp
Weight: Approximately 600 lbs (272 kg)
Cooling System: Water-cooled with thermostat & pressure-controlled
The Verado 250 also features the Advanced MidSection (AMS) for reduced vibration and noise, and Adaptive Speed Control (ASC) for maintaining engine RPM despite changes in load or conditions12.
great range of new and used marine accessories. We are also main dealers for outboard engines . Outboard Services and Marine Ltd are based on the south coast of Cornwall. We have a great range of new and used marine accessories. We are also main dealers for outboard engines,
OUTBOARD BOAT ENGINE WHOLESALE
We got OUTBOARD MOTOR ENGINES for sale at VERY VERY CHEAP affordable prices. Varieties of them.
WE ARE SUPPLIERS OF HIGH QUALITY OUTBOARD ENGINES BOTH USED AND NEW.
EXTREME OFFSHORE PERFORMANCE AND DURABILITYâ??NOT TO MENTION STRIKING GOOD LOOKS.
item
value
Condition
New
Engine
4 Stroke
Fuel Type
Gasoline
Cylinders
6
Engine Position
OUTBOARD
Dimensions (L x W x H) (mm)
1266 x 729 x 1179
Brand Name
Outboard Engine Boat Motor
Model Number
Outboard Engine Boat Motor
Engine type
4 Stoke
Product Name
Outboard 4 Stroke
Displacement
52cc
Starting system
Manual
Warranty
1 Year
Type
4 Stroke Model
Control System
Tiller Control
Color
Black
Application
Marine SHIP
Engine Model
CM6D28C
engines,
OUTBOARD BOAT ENGINE WHOLESALE,
We got OUTBOARD MOTOR ENGINES for sale at VERY VERY CHEAP affordable prices. Varieties of them.
WE ARE SUPPLIERS OF HIGH QUALITY OUTBOARD ENGINES BOTH USED AND NEW.
EXTREME OFFSHORE PERFORMANCE AND DURABILITYâ??NOT TO MENTION STRIKING GOOD LOOKS.
OUTBOARD 4 STROKE
Mileage one to two hours used
Fuel Gasoline and Diesel
Gears Manual and Authomatic
Engine 4,6 and 8
What's the introduction of micro oval gear flow meter
Micro oval gear low flow meter is a kind of oval gear flow meter , along to positive displacement flow meter. There is thousands of manufacturers who can produce oval gear flow meter. But only several manufacturer who have technology to produce micro liquid flow meter.
Micro oval gear flow meter offer the highest accuracy and measure for various viscosity liquid. Special patent technology to measure flow from 0.1ml/min and ensure working life more 5 years.
Micro oval gear low flow meter is wildly used for various industries for precision measurement. So far it has been serviced for more 100 using condition, such as fuel oil measurement, adhesive control , hydraulic life cycle testing, electrolyte dosing, natural gas odorization.
What's the main features of micro oval gear flow meter
1) anti-dust, anti-vibration, anti-corrosive&explosion-proof.
2) max accuracy up to 0.2%
3) min flow : 0.1ml/min
4) max temperature: 200c
5) max pressure: 1000bar
6) viscosity liquid:0.3~10000cps.
What's the introduction of micro oval gear flow meter
Micro oval gear low flow meter is a kind of oval gear flow meter , along to positive displacement flow meter. There is thousands of manufacturers who can produce oval gear flow meter. But only several manufacturer who have technology to produce micro liquid flow meter.
Micro oval gear flow meter offer the highest accuracy and measure for various viscosity liquid. Special patent technology to measure flow from 0.1ml/min and ensure working life more 5 years.
Micro oval gear low flow meter is wildly used for various industries for precision measurement. So far it has been serviced for more 100 using condition, such as fuel oil measurement, adhesive control , hydraulic life cycle testing, electrolyte dosing, natural gas odorization.
What's the main features of micro oval gear flow meter
1) anti-dust, anti-vibration, anti-corrosive&explosion-proof.
2) max accuracy up to 0.2%
3) min flow : 0.1ml/min
4) max temperature: 200c
5) max pressure: 1000bar
6) viscosity liquid:0.3~10000cps.
What's the introduction of micro oval gear flow meter
Micro oval gear low flow meter is a kind of oval gear flow meter , along to positive displacement flow meter. There is thousands of manufacturers who can produce oval gear flow meter. But only several manufacturer who have technology to produce micro liquid flow meter.
Micro oval gear flow meter offer the highest accuracy and measure for various viscosity liquid. Special patent technology to measure flow from 0.1ml/min and ensure working life more 5 years.
Micro oval gear low flow meter is wildly used for various industries for precision measurement. So far it has been serviced for more 100 using condition, such as fuel oil measurement, adhesive control , hydraulic life cycle testing, electrolyte dosing, natural gas odorization.
What's the main features of micro oval gear flow meter
1) anti-dust, anti-vibration, anti-corrosive&explosion-proof.
2) max accuracy up to 0.2%
3) min flow : 0.1ml/min
4) max temperature: 200c
5) max pressure: 1000bar
6) viscosity liquid:0.3~10000cps.
The polyester staple fiber machine (PSF plant) takes virgin PET Chips, recycled Bottle Flakes, Popcorn and Lumps, etc., as raw material, with continuous drying (or batch drying through Vacuum Dryer), high pressure melt spinning process engineering and VFD controlled Spinning & Stretching process engineering to produce normal Staple Fibre, High Tenacity Low Elongation Staple Fibre and Hollow Fibre. Single plant capacity is 15T.P.D. to 80T.P.D.
Equipment Technical Data
Titer Range dtex 6.67-16.67
Spinning Pos. nos. 6-24
Spinning Pitch mm 700, 750
Plant Capacity TPD 15-80
Spinneret dia. mm 328, 358, 410
Spinning Mechanical Speed m/min 500-1,500
Spinning Processing Speed m/min 500-1,300
Stretching Mechanical Speed m/min 240
Stretching Processing Speed m/min 230
Total Tow Titer at Stretching dtex 600,000-3,000,000
Stuffer Box Width mm 160-410
Cutting Length mm 25, 32, 38, 44, 51, 64, 76, 101
Bale Weight kg 200-350
Application:
Cushions Pillows Quilts Toys Jacket Mattress Non woven carpet Automotive felts, speaker felts, geo textiles, polyfill wadding, filter fabrics and other acoustics as well.
Drawing line: Can Creel Inlet Thread Guide Tow Guide Stand Dipping Bath 1st Draw Stand Draw Bath 2nd Draw Stand Draw Steam Chest 3rd Draw Stand Tow Stacker Crimper Steam Box Crimper Silicone Oil Sprayer Machine Tow Tension Stand Cutter Fiber Spreading Machine Relaxer Fiber Blowing system Baling Press
Certificate
ISO9001
Packaging Details
Neutral packing , Customer specified packaging
Warranty
6 months
Stock
In Stock, cannot be naked without packing In air
Shipping Way
DHL, FedEx, UPS, TNT, EMS, ARAMEX, By Air
Payment Terms
T/T, Western Union, MoneyGram, PayPal, Ect.
Product Name
120 Fuel nozzle( Automatic nozzle)
Material
Body : Aluminum;
Seals:buna-N, biton;
Main stem:stainless steel
Main stem seals:viton cased oil seal / graphite with Teflon;
Color
Blue, Green, Black, Red, Yellow
Inlet Size
Outlet diameter
BSP 1", NPT1 "
1"
Flow rate
0-120L/min
Package
1 Piece individual boxed /0PCS/ carton
Working pressure
0.18MPa
Features & Benefits:
Model 120 Automaic Fuel Nozzle is applicable to large-scale and high flow gas station,heavy-duty truck,vehicle and fleet service. If you run an all-around gas station,or fill your own fleet, or manage a card-type gas station, the Model 120 high flow nozzle with low cost,long service life and gooddurability will increase your working efficiency adn sales profit.
3447 Metering Fuel Nozzle Lly 25 Suppliers
Short on time? Let Metering Fuel Nozzle Lly 25 sellers contact you.
