Matsutec HP-33A 4.3" color LCD diaply AIS transponder combo with GPS navigator The HP-33A is a class B AIS transponder for Non-SOLAS vessels such as pleasurecraft, work-boat, fishing boat etc small boat. Special design Watching dispaly to monitor Fishing net buoy, friendly ships etc. External Alarm for MOB and Collision-Risk management. Feature To AIS 1. Detail Target list and Radar overview 2. Watching disaply to monitor important subject, example: Fihsing net buoy, Friend ship etc 3. External Alarm (Buzzer) 4. Low cost, reduced size and easy installation make the HP-33A ideal to meet your budgets and demands of owners and vessel operators To GPS 1. 4.3" Sunlight Viewvable color LCD (Brightness: 500 cd) 2. GOTO track navigation 3. Stores up to 10,000 marks/ waypoints, 100 routes and 3,000 track points 4. Delicated Man Over Board Button (MOB) 5. Support NMEA 0183 ver 2.0 6. 7 display modes available, including 2 user-customized modes 7. SBAS capable for better measurement Equipment list ( standard): 1. Dispaly unit HP-33 2. Antenna unit HA-017 with cable 10m 3. Power canle, 2m 4. Standard spare parts and installation material 5. Operator manual
Matsutec 8" Color LCD Marine AIS class B transponder / GPS chartplotterlotter Model: HP-828A FEATURE: 1. High resolution TFT day-view LCD display 2. SD-cards slot for C-map Max and user data 3. C-map Max and K-chart Selectable 4. Tide table 5. Versatile display modes including: - Plotter Screen - Nav Data - Satellite Information - AIS Display - Compass Screen 6. GOTO Track Navigation 7. Map Orientation Select 8. Proximity waypoint alarms 9. Perspective View 10. Palette - Normal - Daylight - Exposed to Sunlight - Night - In Dark Environment - NOAA - Paper Chart Colors - Celestial SPECIFICATIONS Plotter Characteristics 1. Waypoints/Icons: 14,000 waypoints with name, symbol, 10 proximity waypoint. 2. Route Memory: waypoint up to 169 points each, plus MOB and Track Navigator or Goto track modes 3. Tracks: 21,000 point automatic track log; 10 saved track (up to 2100 track points each) let you retrace your path in both derections 4. Alarm: XTE, Anchor Drag, Arrival, Speed, Voltage, Proximity, Waypoint and Time, AIS alarm. 5. PALLETE - Normal - Daylight: Exposed to sunlight - Night: In dark environment - NOAA: Paper chart color 6. Tides: Tide Data 7. Projection: Mercator projection 8. Position format: Lat/Lon 9. Base Map: Built-in ONWA K-Chart 10. External Map: SD cards slot for user settings 11. User data storage: Internal backup of user settings, or external SD-card 12. Plot Interval: 1s to 99h or 0.01nm to 9.99nm 13. 0.01nm to 1,000nm 14. Nav Data Input/Output: - Input: $--DBT, $--DPT, $--GGA, $--GLL, $--MTW, $--RMA, $--RMB, $--RMC, $--VHW, $--VTG, $--ZDA - Output: $--AAM, $--APB, $--BOD, $--BWC, $--GGA, $--GLL, $--RMB, $--RMC, $--VTG, $--XTE, $--ZDA, $--WPL, $--HDG - Output for autopilot: $--AAM, $--APB, $--BOD, $--VTG 15. PERSPECTIVE VIEW: On/off GPS Receiver Characteristics 1. Receiver: 50 parallel channel GPS receiver continuously Tracks and uses up to 50 satellites to compute and update your position 2. Acquisition: Cold start: 27 seconds average Warm start: 27 seconds average Hot start: 1 seconds average 3. Update rate: 1/second, continuous 4. Accuracy: Position:
Matsutec Class B AIS Transponder Model: HA-102 FEATURES Electrical function is accordance with IEC 62297-1 Dual Channel function: Two TDMA receivers ar receiving datum in two independent channels at the same time, and one TDMA transmitter is transmitting in two independent channels alternately. CSTDMA function can avoid and solve communication conflict. Transponder has external serial data interface(RS-422, RS-232). Transmit and reciever safety message, and equipped with "SOS" safety button. Support three operation mode: Carrier-sense mode, assigned mode and polled mode. Internal GPS reciever, as data source for position, COG and SOG can be connected to all devices compatible to GPS and PC, PDA, ECDIS, RADAR, etc. Alarm and indication (via LED) for power , error, time-out, status. Specifications STANDARDS IEC 62297-1 IEC 61162-1 IEC 60945-2002 VHF RECEIVER Frequency Range 156.025MHZ ~ 162.025 MHZ Channel Bandwidth 25 KHZ Number of AIS Receivers 2 Receiver ( one time shared between AIS/DSC ) / 1 Transmitter CH-1 Default CH 87B ( 161.975 MHZ ) CH-2 Default CH 88B ( 162.025 MHZ ) Number of DSC Receiver 1 ( CH 70) RX DSC 156.525 MHZ Max. Usable Sensitivity PER less 20% at -107dBm VHF TRANSMITTER Power Output 2 Watt ( 33 dBm ±1.5dB ) Modulation GMSK / FM Data Rate 9.6K dps / per channel Modulation Spectrum IEC 62287 DSC RECEIVER Modulation 1300 HZ / 2100 Hz FSK Data Rate 1200 bps ± 30 ppm Spurious Response Rejection Over 70dB for Signal @ -104dBm; BER less 1% Blocking More 84dB for Signal @ -104dBm; BER less 1% GPS RECEIVER Receiving Channels 12 Channels Acquisition Sensitivity -140dBm Tracking Sensitivity -150 dBm Position Accuracy < 2.5m CEP ( GPS ) without SA Output Rate 1 Hz POWER SUPPLY Supply Voltage 12V DC ( 10V ~ 20V ) Power Consumption Less than 10W MAIN UNIT 4 LED Indicator Working Status 1 ON/OFF Switcher INTERFACE Ports NMEA 0183 / RS-422 / RS-232 GPS Antenna ( Optional ) Female TNC Connector VHF Antenna ( Optional ) Female Type M Connector ( Type N Connector optional ) ENVIROMENT Operating Temperature Antenna : -25 ~ 70 C Celcius Others : -15 ~ 55 C Celcius Storage Temperature -25 ~ 70 C Celcius Humidity Operating: 0 ~ 95 RH at 40 C Celcius GPS Antenna operating : 100% Hermetically sealed VHF Antenna operating : 100% Hermetically sealed Vibration IEC 60945 Waterproof IPX5 PHYSICAL Size in mm ( W ) 234mm Size in mm ( H ) 40mm Size in mm ( D ) 167mm Weight
Diesel En590 10-50-500-5000 And Others Ppm Ultra Low Sulphur. D2 0,2-62 Gost 305-82 Or 0,01 Or 0,05. D2 Automotive Fuel Oil (ago). D6 Virgin Fuel Oil. Hsd Diesel High Speed 500ppm En90. Diesel En590 Euro4 Gost 52368. Pms Premium Motor Spirit Jp54 (ts1) Gost 10227-86. Jet Fuel A1 Gost 10227-86. Marine Fuel Oil Cst 180-280-380. Espo (siberia Pacific Oil) Crude Oil Api 34,7. Lco (light Cycle Oil). Mazut Mt100 Gost 10585-75 And 10585-99. Rebco Gost 51 858-2002/9965-76 Api32/crude Oil 39-1623-93. Lpg 50/50 Propane/butane - 70/30 P/b. Lng 5542-87 By Iso Containers Etc. Gasoline All Types (87-89-92-95). Bitumen/asphalt All Grades. Fertilizers Urea, Dap, Etc Product Description : Petroleum products are materials derived from crude oil (petroleum) as it is processed in oil refineries. ... These fuels include or can be blended to give gasoline, jet fuel, diesel fuel, heating oil, and heavier fuel oils.. Price of product ( USD price or FOB price) : 20.000 MT monthly market price. 100.000 MT monthly market price Less 5%. Product origin : Russia and Non Russia Key Specifications/Special Features : All types/grades of Fuels, Gas, Oil are available for supply. Many commercial names for oils, fuels, gases, etc. are used in the market. To avoid misunderstanding basic details of specifications needed by buyer are mandatory. Specifications for types/grades of products (special grade needed by buyer) will be issued after received your credible purchase request in the form LOI/ICPO docs. Minimum Order Size and Packgaing details : Bulk in tanker vessels. Tanks 20 MT.
Fly Ash: Fly Ash is by product generated during combustion of coal, and comprises the fine particles that rise with the flue gases. Ash which is collected from the bottom is termed bottom ash. Fly ash is collected by electrostatic precipitators or other particle filtration equipment before the flue gases reach the chimneys of coal-fired power plants and together with bottom ash removed from the bottom of the furnace is in this case jointly known as coal ash. Depending upon the type of coal being used, the specification of Fly Ash varies considerably, but Fly Ash contains substantial amounts of silicon dioxide and calcium oxide (CaO), both being endemic ingredients in many coal-bearing rock strata. We are a reputed Fly Ash Exporter based in India and are supplying Fly Ash different cement, ready mix concrete, steel, refractories and construction industries. The Major Utilization Areas Of Fly Ash : - Manufacture of Portland Pozzolanic Cement & Performance improver in Ordinary Portland cement (OPC). - Part replacement of OPC in cement concrete. - High volume Fly Ash concrete. - Roller Compacted Concrete used for dam & pavement construction. - Manufacture of ash bricks and other building products. - Construction of road embankments, structural fills, low lying area development. - As a soil amender in agriculture and wasteland development. Types of Fly Ash: - According to the type of coal used fly is classified into two types. Anthracite and bituminous coal produces Fly Ash classified as class F. Class C Fly Ash is produced by burning lignite or sub-bituminous coal. Class C Fly Ash has self-cementing properties. - Class F and Class C Fly Ash are products of the combustion of coal in large power plants. Fly Ash is collected in electrostatic precipitators or baghouses, and then transferred to large silos for shipment. When needed, Fly Ash is classified by precise particle size requirements, thus assuring a uniform, quality product. - Class F Fly Ash is available in the largest quantities. Class F is generally low in lime, usually under 15 percent, and contains a greater combination of silica, alumina and iron (greater than 70 percent) than Class C Fly Ash. - Class C Fly Ash normally comes from coals which may produce an ash with higher lime content generally more than 15 percent often as high as 30 percent. Elevated CaO may give Class C unique self-hardening characteristics. Minimum Order Quantity : 1 container
Liquid Ethyl Acetate: Ethyl Acetate is an ester of Ethanol and Acetic Acid, (systematically Ethyl Ethanoate, commonly abbreviated EtoAc or EA) an organic compound having formula CH3COOCH2CH3. Liquid Ethyl Acetate is a colorless solvent has a characteristic sweet / fruity smell. We are a distinguished Liquid Ethyl Acetate Exporter based in India. Liquid Ethyl Acetate, offered by us, is perfect in formulation is well-tested. Further, we welcome bulk orders for Liquid Ethyl Acetate with complete sense of responsibility. Applications: - Ethyl Acetate is used in a variety of coating formulations such as epoxies, urethanes, cellulosic, acrylics and vinyl’s. - Applications for these coatings are numerous wood furniture and fixtures, agricultural, construction and mining equipment, auto refinishing, and maintenance and marine uses. - Ethyl Acetate has applications as a solvent in inks for flexographic and rotogravure printing. - It is used as an extraction solvent in the production of pharmaceuticals and food, and as a carrier solvent for herbicides. - High purity product can be used as a viscosity reducer for resins used in photoresist formulations in the electronics industry.
DATA SHEET FOR EPOXY EPOXY COATING :- INTRODUCTION - EPOXY COATING (HYB) is a two part high solids solvent free epoxy phenolic resin based coating system designed for hard wearing, smooth surface finish for floors, walls and on steel structures. Nonskid surface finish can be achieved on floor, if required. FEATURES: 1) Hard Wearing 2) Non Dusting 3) Excellent Surface Finish 4) Non Smelling 5) Good Aesthetics 6) Highly Chemical Resistant APPLICATION: 1.Stir well before mixing Part A and Part B and mix in the prescribed ratio. 2.Apply one coat of EPOXY primer on the clean and dry surface. 3.EPOXY COATING (HYB) should be applied on the surface by brush or roller within 24 hrs. After application of primer coat it should be allowed to air dry for min. 4 hrs. Preferable in a dust free atmosphere. 4.Apply min. 2 coats with the intercoat interval of 6-8 hrs. PRODUCT SPECIFICATIONS: Application - Brush, Roller Mixing Ratio - As Directed on Packing Port Life - 30 Mins. Drying Time - Touch Dry- 30 Min, Hard Dry 6 Hrs. - Intercoat Interval 6-8 Hrs. Min. - Dry Film Thickness 125-150 Microns/per coat - depending on porosity Covering Capacity - 6-8 sq.met/kg per coat depending on porosity, roughness & method of application. Color Shades - All Standard Shades RECOMMENDED USES: 1) Food & Pharmaceutical 2) Work Shop 3) Clean Room Application 4) Chemical Resistant Coating for Concrete& Steel 5) Petrochemical, Fertilizer plants METHOD OF APPLICATION: SURFACE PREPARATION The long-term durability of the applied Epoxy coating (HYB) epoxy coating is dependent on the adhesion between sub-base and coating material. It is most important therefore, that the substrate surfaces are correctly prepared prior to application. 1.Before application of the Epoxy coating (HYB) surface should be free from loose partials, rust, oils, grease or earlier coatings and should be totally dry. 2.New concrete or cementations surface should be placed at least 28 days and have a moisture content of less than 5% before application of Epoxy coating (HYB) 3.After surface is dry, all repair work like sealing of joints, cracks filling of cavities and crevices should be carried out. HEALTH & SAFETY - Keep the containers tightly closed when not in use. Avoid contact with skin & eyes. It comes in contact with the body, wash affected parts with plenty of water and contact a doctor. Other known sector for Epoxy floor lining, Epoxy garage floor lining, Concrete epoxy lining, Concrete floor epoxy lining, Epoxy pipe lining, Marine epoxy lining, Sub marine epoxy lining, Basement lining epoxy floor shield, Louisiana, Oregon, Chip lining color epoxy floor, Aviation lining epoxy interior.
Dried Rosehips Class B Rosa Canina
2025 Marine water proof Plywood * Marine Plywood made from Meranti wood species Size by demand , container Flooring replacement 28mm x 1220mm x 2440mm * Multi Purposes for water proof out door application + Both faces made from Meranti veneer * Mix Meranti Core , high density * WBP Water resistant Glue * Common Size 28mm x 1220mm x 2440mm or by demand = 12 pcs/cbm * All sizes available by deamnd * 4 sides seaedl by water proof acrylic paint * MOQ = Loading in 40 ft approx 48 cbm = 576 pcs in 16 pallets *** * Payment term 30% Deposit and 70% balance against copy of B/L , no LC will be accepted to avoid high Banking cost
Indonesia Film faced Construction concrete form work Plywood / Marine Plywood Factory ***** Film Faced 120gr/m2 Black or Brown colors *** Mix hardwood Core , high density *** WBP Water resistant Glue *** Size 18mm x 1220mm x 2440mm = 13 plies *** 4 sides seal by water proof acrylic paint **** Proper cycling used time up to 10 times ***** Loading in 40 ft approx 896 pcs *** Packing in Corrugated Carton Box ***** Payment term by Bang Transfer = 30% Deposit and 70% balance against copy of B/L , no LC will be accepted to avoid high Banking cost ***** Please contact us for further details
Indonesia Film Faced Plywood Manufacturer and Exporter 2024 Marine Plywood water proof * Usage : container flooring replacement or other out door purposes * Face / Back using Red Meranti Veneer * Mix hardwood Core , high density * 2 times hot pressed * WBP Water resistant Glue * Common Size 28mm x 1220mm x 2440mm = 12 pcs / m3 * MOQ = Loading in 40 ft approx 576 pcs *** Proper use cycling usage time more than 10 times * Payment term 30% Deposit and 70% balance against copy of B/L , no LC will be accepted to avoid high Banking cost
Indonesia Film Faced Plywood Manufacturer and Exporter 2025 Film Faced Construction concrete form work / Marine Plywood * Film Faced = Film 120gr/m2 Black or Brown color and may printed your logo on it * Top/Back veener using Meranti Hardwood * Mix hardwood Core , high density * Common Size 18mm x 1220mm x 2440mm * 13 plies or any sizes by demand * Water resistant WBP Glue * 4 sides seaedl by water proof acrylic paint * MOQ = Loading in 40 ft approx 896 pcs 04 48 cbm * Packing by corrugated carton boxes in pallet **** Proper use cycling usage time more than 10 times * Payment term 30% Deposit and 70% balance against copy of B/L , no LC will be accepted to avoid high Banking cost* You may visiting us after placing order
Film Faced Construction concrete form work / Marine Plywood * Film Faced = Film 120gr/m2 Black or Brown * Could be printed buyer's logo on Film * Mix hardwood Core , 13 plies = high density * Face / Back Meranti hardwood veneer * WBP Water resistant Glue * Common Size 18mm x 1220mm x 2440mm * 4 sides seal by water proof acrylic paint * 1 time or 2 times hot pressed by demand * MOQ = Loading in 40 ft approx 896 pcs * Proper use cycling usage time more than 10 times * Payment term 30% Deposit and 70% balance against copy of B/L , no LC will be accepted to avoid high Banking cost
Film faced Construction concrete form work or Water proof Marine Plywood ***** Film Faced specs = 120gr/m2 Black or Brown colors , *** Mix hardwood Core , high density *** WBP Water resistant Glue *** Size 18mm x 1220mm x 2440mm *** 13 plies *** 4 sides sealed by water proof acrylic paint **** Cycling used time for more than 10 times in proper used *** Loading in 40 ft approx 48 cbm = 896 pcs *** Payment term 30% Deposit and 70% balance against copy of B/L , no LC will be accepted to avoid high Banking cost and for saving time please do not send any inquiry for L/C buyers
Indonesia Film Faced Plywood Manufacturer and Exporter 2024 Film Faced Construction concrete form work or Marine Plywood water proof * Film Faced = Film 120gr/m2 Black or Brown * Mix hardwood Core , high density * 1 time or 2 times hot pressed * WBP Water resistant Glue * Common Size 18mm x 1220mm x 2440mm = 18.66 pcs / m3 * 13 plies or any sizes by demand * 4 sides seaedl by water proof acrylic paint * MOQ = Loading in 40 ft approx 896 pcs *** Proper use cycling usage time more than 10 times * Payment term 30% Deposit and 70% balance against copy of B/L , no LC will be accepted to avoid high Banking cost
Indonesia Film Faced Plywood Manufacturer and Exporter 2024 Film Faced Construction concrete form work or Marine Plywood water proof * Film Faced = Film 120gr/m2 Black or Brown * Mix hardwood Core , high density * 1 time or 2 times hot pressed * WBP Water resistant Glue * Common Size 18mm x 1220mm x 2440mm = 18.66 pcs / m3 * 13 plies or any sizes by demand * 4 sides sealed by water proof acrylic paint * MOQ = Loading in 40 ft approx 896 pcs *** Proper use cycling usage time more than 10 times * Payment term 30% Deposit and 70% balance against copy of B/L , no LC will be accepted to avoid high Banking cost
Indonesia Origin Film faced Construction concrete form work / Marine Plywood ***** Film Faced 120gr/m2 Black or Brown *** Mix hardwood Core , high density *** WBP Water resistant Glue *** Size 18mm x 1220mm x 2440mm *** 13 plies *** 4 sides seal by water proof acrylic paint **** Used times more than 10 - 15 times in proper used ***** Loading in 40 ft approx 896 pcs *** Packing in Corrugated Carton Box ***** Payment term by Bang Transfer = 30% Deposit and 70% balance against copy of B/L , no LC will be accepted to avoid high Banking cost ***** Please dont send any inquiry for L/C used buyers and please contatc us for further details
Selected Anthracite Coal Granular Activated carbon for amine purify ,remove EDA, MEDA, DIPA, etc Granular Coal based activated carbon is made from coal though high temperature activation .It is black in appearance, non-toxic and tasteless, with large pores. It is featured by strong adsorption capacity, high wear-resistant performance etc. It is evtensively applied to solvent recovery, catalyst carriers, gas adsorption and water purification in the field of chemicals, environmental protection, power plant, electronics, petrochemical industry, farming, medicine, marine transportation. Packing 25kg PVC bags+1MT big bag or as customers'requested Trade terms FOB CNF CIF Payments terms 1).T/T 30%advance , 2).the balance against copy of B/L Delivery time After we receive deposit within 7-10days Sample Sample is free within 1kgs
Top-Quality Plywood for Sale Multiple Types and Grades Available Types of Plywood: Softwood Plywood: Perfect for construction, subflooring, roofing, and wall sheathing. Hardwood Plywood: Ideal for furniture, cabinetry, and interior fixtures. Tropical Plywood: Best for marine construction and exterior furniture. Flexible Plywood: Great for curved surfaces and architectural elements. Marine Plywood: Built for boat building and outdoor structures. Fire-Retardant Plywood: Essential for safety-critical applications in public buildings. Grades Available: A-Grade: Highest quality with a smooth surface and minimal defects, perfect for cabinetry and furniture. B-Grade: Solid surface with few knots, suitable for furniture and shelving. C-Grade: Includes minor imperfections, ideal for subflooring and projects where surface finish is less important. D-Grade: More knots and defects, great for construction and underlayment. Specifications: Thicknesses: 6 mm, 9 mm, 12 mm, 15 mm, 18 mm, 25 mm Sheet Sizes: Standard 2440 mm x 1220 mm (8 ft x 4 ft), with custom sizes available upon request Glue Types: Moisture Resistant (MR) for indoor use, Weather and Boil Proof (WBP) for outdoor use Face Veneer: Available in smooth or textured finishes, depending on grade and type Applications: Construction: Ideal for walls, roofs, and flooring. Furniture: Perfect for creating tables, chairs, and cabinets. Cabinetry: Suitable for kitchen units, wardrobes, and shelving. Marine Use: Excellent for boat building, docks, and piers. Decorative: Great for wall paneling, partitions, and ceiling panels.
Top-Quality Plywood for Sale Multiple Types and Grades Available Types of Plywood: Softwood Plywood: Perfect for construction, subflooring, roofing, and wall sheathing. Hardwood Plywood: Ideal for furniture, cabinetry, and interior fixtures. Tropical Plywood: Best for marine construction and exterior furniture. Flexible Plywood: Great for curved surfaces and architectural elements. Marine Plywood: Built for boat building and outdoor structures. Fire-Retardant Plywood: Essential for safety-critical applications in public buildings. Grades Available: A-Grade: Highest quality with a smooth surface and minimal defects, perfect for cabinetry and furniture. B-Grade: Solid surface with few knots, suitable for furniture and shelving. C-Grade: Includes minor imperfections, ideal for subflooring and projects where surface finish is less important. D-Grade: More knots and defects, great for construction and underlayment. Specifications: Thicknesses: 6 mm, 9 mm, 12 mm, 15 mm, 18 mm, 25 mm Sheet Sizes: Standard 2440 mm x 1220 mm (8 ft x 4 ft), with custom sizes available upon request Glue Types: Moisture Resistant (MR) for indoor use, Weather and Boil Proof (WBP) for outdoor use Face Veneer: Available in smooth or textured finishes, depending on grade and type Applications: Construction: Ideal for walls, roofs, and flooring. Furniture: Perfect for creating tables, chairs, and cabinets. Cabinetry: Suitable for kitchen units, wardrobes, and shelving. Marine Use: Excellent for boat building, docks, and piers. Decorative: Great for wall paneling, partitions, and ceiling panels.
