Manual Tong Suppliers and Manufacturers

The Manual tongs are necessary tools applied to make up and break out pipes. By changing the lug jaws and latch steps the manual tongs can hold different size of tongs.They are designed and manufactured according to API 7K for well drilling equipment. The B type manual tongs are includes B type, SB type, and DB type, SDD,LF, Type C, workover tongs, WWC, WWB,AAX, Casing tong, Extended casing tons.

Manual tongs are necessary tools applied to make up and break out pipes. Changing lug jaws and latch steps can adjust different handling sizes of the tongs. They are designed and manufactured according to API Spec 7K Specification for drilling and well servicing equipment. Q 3-3/8 ~12-3/475 Type B Manual Tongs Type B Manual Tongs is an essential tool in oil operation to fasten or remove the screws of drill pipe and casing joint or coupling. The handling size of manual tong can be adjusted by changing latch lug jaws and latch steps. The available range of manual tong is from 3-3/8 ~12-3/4 inch. liuda@lakepetro.com

The Manual tongs are necessary tools applied to make up and break out pipes. By changing the lug jaws and latch steps the manual tongs can hold different size of tongs.They are designed and manufactured according to API 7K for well drilling equipment. The B type manual tongs are includes B type, SB type, and DB type, SDD,LF, Type C, workover tongs, WWC, WWB,AAX, Casing tong, Extended casing tons.

Drill pipe slips Type SD can accommodate drill pipes from 2-3/8 to 7 inch. They are classified as type Short(SDS),Medium(SDML),Extra Long(SDML).SDS slips are designed for shallow hole drilling, SDML slips are the perfect choice for all medium depth drilling and SDXL slips are designed for deep drilling. The slips are designed and manufactured in API Spec 7K and SY/T 5049 Slips for well drilling. It is suitable to handle the drill rods during the oil well drilling operations for the exploration of petroleum and natural gases ,It is an essential tool for coupling and uncoupling .

Drill pipe slips Type SD can accommodate drill pipes from 2-3/8 to 7 inch. They are classified as type Short(SDS),Medium(SDML),Extra Long(SDML).SDS slips are designed for shallow hole drilling, SDML slips are the perfect choice for all medium depth drilling and SDXL slips are designed for deep drilling. The slips are designed and manufactured in API Spec 7K and SY/T 5049 Slips for well drilling. It is suitable to handle the drill rods during the oil well drilling operations for the exploration of petroleum and natural gases ,It is an essential tool for coupling and uncoupling .

Specifications: They are designed and manufactured according to API Spec 7K. Manual Tongs are necessary tools applied to make up and break out pipes. Changing lug jaws and latch steps can adjust different handling sizes of pipes. They are designed and manufactured according to API Spec 7K.

AAX Manual Tong is an essential tool in oil drilling operation to fasten or remove the screws of drill pipe and casing joint or coupling.It can be adjusted by changing latch lug jaws.

API 7k Casing Manual tong Product information 1. Structure of Casing Mannual Tongs Description The casing tongs are designed and manufactured in accordance with the API Spec 7K Specification for Drilling and Well Servicing Equipment and the National Standard for the Petroleum Gas Industry SY/T 5035 Elevator Links Elevators and Tongs which is a useful tool applied to make up and break out drill pipes, coupling hoop of the drill pipe joint casings casing hoops etc. When raise drill tool up and fall it down. Changing hinge jaws and handling shoulders of latch lug jaws can adjust the handling size of the tongs. 2. Main Features 1) API standard; 2) Very Good Quality; 3) After-sale Service.

Specifications: They are designed and manufactured according to API Spec 7K. Manual Tongs are necessary tools applied to make up and break out pipes. Changing lug jaws and latch steps can adjust different handling sizes of pipes. They are designed and manufactured according to API Spec 7K.

The dies and Jaws are made of high-quality alloy steel in SAPWELLS. They are chemically heart-treated for surface hardness. They are wear-resisting and corrosion-resisting and they have a long service life. We can also design and manufacture special inserts according to customer's requirement. Inserts and Dies can be designed according to the customer's requirement .

The dies and Jaws are made of high-quality alloy steel in SAPWELLS. They are chemically heart-treated for surface hardness. They are wear-resisting and corrosion-resisting and they have a long service life. We can also design and manufacture special inserts according to customer's requirement. Inserts and Dies can be designed according to the customer's requirement .

The dies and Jaws are made of high-quality alloy steel in SAPWELLS. They are chemically heart-treated for surface hardness. They are wear-resisting and corrosion-resisting and they have a long service life. We can also design and manufacture special inserts according to customer's requirement.

The following example is for you reference: 1.Description: Manual tongs are necessary tools applied to make up and break out pipes.Changing lug jaws and latch steps can adjust different handling sizes of the tongs.They are designed and manufactured according to API Spec 7K Specification for drilling and well servicing equipment. Q4"~17"-135 Type SDD Manual Tong Type SB Manual Tong is an essential tool in oil operation to fasten or remove the screws of drill pipe and casing joint or coupling .The handling size of manual tong can be adjusted by changing latch lug jaws and latch steps.The available range of manual tong is from 4~17 inch. 2.Key Words: Manual Tong, Drilling Manual Tong, SDD Type Manual Tong. 3.Features: (1).API 7K certified quality assured. (2).Easy to operation to holding different size by changing the lug jaw. (3).Spare parts available after sales,all parts are traceable. (4).Size range from 4~17. (5).Rated Torque range from 80kN·m to 135kN·m. 4.After-sales Service Provided: No overseas service provided. 5.Warranty: one year. 6.Certificaiton: API 7K. 7.Condition: New. 8.Color: Required. 9.Model: Type SDD. 10.Rated Torque(kN*m): 80~135. 11.Size Range: 4"~17". 12.Place of Origion: China(Mainland). 13.Minimun Order: 1Set(s). 14.Material: Carbon Steel. 15.Processing Type: Forging. 16.Machine Type: Drilling Equipment. 17.Use: Well Drilling. 18.Processing Time: 30days. 19.Supply Ability: 300sets/per month. 20.Payment Terms: T/T; L/C; Western Union. 21.Packing&Delivery: (1).Packing Details:Standard Export Package. (2).Port:China Main Port.

Manual tongs are neccessories tools applied to make up and break out pipes. Changing Plug jaws and latch steps can adjust different handing size fo the tongs, they are designed and manufactrued according to API spec 7K specification for drilling and well servicing equipemt.

1. Main Technical Parameters: (1). No. of Latch Lug Jaw: 1#. Size Range: 2 3/8"~3 1/2" (60.3~88.9 mm). Rated Torque (kN*m): 27. (2). No. of Latch Lug Jaw: 2#. Size Range: 2 7/8"~4 1/4" (73~108 mm). Rated Torque (kN*m): 27. (3). No. of Latch Lug Jaw: 3#. Size Range: 4"~5 3/4" (101.6~146.1 mm). Rated Torque (kN*m): 27. (4). No. of Latch Lug Jaw: 4#. Size Range: 5 3/4"~7" (146.1~177.8 mm). Rated Torque (kN*m): 20. (5). No. of Latch Lug Jaw: 5#. Size Range: 7 1/4"~8 5/8" (184.2~219.1 mm). Rated Torque (kN*m): 20. (6). No. of Latch Lug Jaw: 6#. Size Range: 9 5/8"~10 3/4" (244.5~273.1 mm). Rated Torque (kN*m): 14. 2. Product Description: Manual tongs are necessary tools applied to make up and break out pipes. Changing lug jaws and latch steps can adjust different handling sizes of the tongs. They are designed and manufactured according to API Spec 7K Specification for drilling and well servicing equipment. Q2 3/8"~10 3/4"--27 Type WWC Manual Tong Type WWC Manual Tong is an essential tool in oil operation to fasten or remove the screws of drill pipe and casing joint or coupling. The handling size of manual tong can be adjusted by changing latch lug jaws and latch steps. The available range of manual tong is from 2 3/8~10 3/4 inch. 3. Features: (1). API 7K certified quality assured. (2). Easy to operation to holding different size by changing the lug jaw. (3). Spare parts available after sales, all parts are traceable. (4). Size range from 2 3/8"~10 3/4". (5). Rated torque range from 14kN·m to 27kN·m. 4. Certification: API 7K. 5. Condition: New. 6. Color: Required. 7. Place of Origin: Shandong, China (Mainland). 8. Minimum Order: 1 Set. 9. Material: Carbon Steel. 10 Processing Type: Forging. 11. Machine Type: Drillnig Tool. 12. Use: Well Drilling. 13. Processing Time: 20 days. 14. Supply Ability: 400 sets / per month. 15. Payment Terms: T / T; L / C; Western Union. 16. Packing and Delivery: (1). Packing Details: Standard Export Package. (2). Port: China Main Port.

The following example is for you reference: 1.Description: Manual tongs are necessary tools applied to make up and break out pipes.Changing lug jaws and latch steps can adjust different handling sizes of the tongs.They are designed and manufactured according to API Spec 7K Specification for drilling and well servicing equipment. Q3 1/2"~13 3/8"-75 Type SB Manual Tong Type SB Manual Tong is an essential tool in oil operation to fasten or remove the screws of drill pipe and casing joint or coupling .The handling size of manual tong can be adjusted by changing latch lug jaws and latch steps.The available range of manual tong is from 3 1/2~13 3/8 inch. 2.Key Words: Manual Tong, Drilling Manual Tong, SB Type Manual Tong. 3.Features: (1).API 7K certified quality assured. (2).Easy to operation to holding different size by changing the lug jaw. (3).Spare parts available after sales,all parts are traceable. (4).Size range from 3 1/2~13 3/8. (5).Rated Torque range from 40kN·m to 75kN·m. 4.After-sales Service Provided: No overseas service provided. 5.Warranty: one year. 6.Certificaiton: API 7K. 7.Condition: New. 8.Color: Required. 9.Model: Type SB. 10.Rated Torque(kN*m): 40~75. 11.Size Range: 3 1/2"~13 3/8". 12.Place of Origion: China(Mainland). 13.Minimun Order: 1Set(s). 14.Material: Carbon Steel. 15.Processing Type: Forging. 16.Machine Type: Drilling Equipment. 17.Use: Well Drilling. 18.Processing Time: 30days. 19.Supply Ability: 50sets/per month. 20.Payment Terms: T/T; L/C; Western Union. 21.Packing&Delivery: (1).Packing Details:Standard Export Package. (2).Port:China Main Port.

The following example is for you reference: 1.Description: Manual tongs are necessary tools applied to make up and break out pipes.Changing lug jaws and latch steps can adjust different handling sizes of the tongs.They are designed and manufactured according to API Spec 7K Specification for drilling and well servicing equipment. Q3 1/2"~17"-90 Type DB Manual Tong Type DB Manual Tong is an essential tool in oil operation to fasten or remove the screws of drill pipe and casing joint or coupling .The handling size of manual tong can be adjusted by changing latch lug jaws and latch steps.The available range of manual tong is from 3 1/2~17 inch. 2.Key Words: Manual Tong, Drilling Manual Tong, DB Type Manual Tong. 3.Features: (1).API 7K certified quality assured. (2).Easy to operation to holding different size by changing the lug jaw. (3).Spare parts available after sales,all parts are traceable. (4).Size range from 3 1/2~17. (5).Rated Torque range from 55kN·m to 90kN·m. 4.After-sales Service Provided: No overseas service provided. 5.Warranty: one year. 6.Certificaiton: API 7K. 7.Condition: New. 8.Color: Required. 9.Model: Type DB. 10.Rated Torque(kN*m): 50~90. 11.Size(in): 3 1/2"~17". 12.Place of Origion: China(Mainland). 13.Minimun Order: 1Set(s). 14.Material: Carbon Steel. 15.Processing Type: Forging. 16.Machine Type: Drilling Equipment. 17.Use: Well Drilling. 18.Processing Time: 30days. 19.Supply Ability: 300sets/per month. 20.Payment Terms: T/T; L/C; Western Union. 21.Packing&Delivery: (1).Packing Details:Standard Export Package. (2).Port:China Main Port.

The following example is for you reference: 1.Description: Manual tongs are necessary tools applied to make up and break out pipes.Changing lug jaws and latch steps can adjust different handling sizes of the tongs.They are designed and manufactured according to API Spec 7K Specification for drilling and well servicing equipment. Q3 3/8"~12 3/4"-75 Type B Manual Tong Type B Manual Tong is an essential tool in oil operation to fasten or remove the screws of drill pipe and casing joint or coupling .The handling size of manual tong can be adjusted by changing latch lug jaws and latch steps.The available range of manual tong is from 3 3/8~12 3/4 inch. 2.Key Words: Manual Tong, Drilling Manual Tong, B Type Manual Tong. 3.Features: (1).API 7K certified quality assured. (2).Easy to operation to holding different size by changing the lug jaw. (3).Spare parts available after sales,all parts are traceable. (4).Size range from 3 3/8"~12 3/4". (5).Rated Torque range from 55kN·m to 75kN·m. 4.After-sales Service Provided: No overseas service provided. 5.Warranty: one year. 6.Certificaiton: API 7K. 7.Condition: New. 8.Color: Required. 9.Model: Type B. 10.Rated Torque(kN*m): 55~75. 11.Size Range: 3 3/8"~12 3/4". 12.Place of Origion: China(Mainland). 13.Minimun Order: 1Set(s). 14.Material: Carbon Steel. 15.Processing Type: Forging. 16.Machine Type: Drilling Equipment. 17.Use: Well Drilling. 18.Processing Time: 20days. 19.Supply Ability: 300sets/per month. 20.Payment Terms: T/T; L/C; Western Union. 21.Packing&Delivery: (1).Packing Details:Standard Export Package. (2).Port:China Main Port.

Manual Break Out Tong for 60mm Drill Pipe Product Description Lake Petro can supply all types of drilling rods such as HDD drilling rods, oil drilling rods, geological drilling rods, anchoring drilling rods and other special drilling rods, and trenchless special drilling tools such as pilot guide bits, swivels, ream bits, reducer unions,pneumatic pipe-rammer, Hydraulic & Manual power break out tong for drill pipe.