MODEL COMMANDO 50LP Cutter Capacity 50mm Depth of Cut 50mm Countersink 30mm* No Load Speed 250-500RPM Motor Specification 1200W Magnet Adhesion 10000N Length 334mm Height 179mm Width 100mm Magnet Size 192mm 82mm Weight 11kg Motor 110/230V Stroke 62mm
AINiCo is composed primarily of Aluminum Nickel Cobalt and also Copper and Titanium. They are manufactured through either casting or sintering process. Cast AINiCo may be manufactured in complex shapes such as horseshoes not possible with other magnet materials. Sintered AINiCo offer slightly lower magnetic properties but better mechanical characteristics. it can be efficiently magnetized in any direction, and for anisotropic AINiComagnet, it generally has greater magnetic capacitive in a preferred orientation than isotropic types. AINiCo is hard and brittle, Machining or drilling cannot therefore be accomplished by ordinary methods. Holes are usually cored in at the foundry, and magnets are cast close to final size and then finish machined to closer tolerances. â?¢ Advantages of AlNiCo Magnet: 1.Customized designs are available. 2.Max working temperature can be as high as 550�°C. 3.Disadvantage: Br and BH(max)are not as high as rare earth magnet. 4.High energies and relatively low coercivity. 5.High magnetic flux density; low mold charge stable temperature properties; easy to shap.
MODEL COMMANDO 100 Max. Capacity (Core/Broach Drilling ) 100mm Dia 100mm Depth Max. Capacity (T.S Twist Drilling) 32mm Watts Input (Full Load) 2000 Watts No Load Speed Gear 1: 150-434 r.p.m./Gear 2: 70-208 r.p.m. Gear 3: 200-500 r.p.m/Gear 4: 240-700 r.p.m. Spindle Bore 19.05 mm (3 / 4") & 31.75 mm (1 ") Approx Net Weight 24.8 kg.
MODEL COMMANDO 75 Max. Capacity 75 mm dia 75 mm Depth Max. Capacity (T.S. Twist Drilling) 26 mm Watts Input (full Load) 1800 Watts No Load Speed Low Gear : 70 - 180 r.p.m. High Gear : 200 - 500 r.p.m Spindle Bore 19.05 mm (3 / 4") & 31.75 mm (1 ") Approx Net Weight 23.5 kg.
MODEL COMMANDO 50 Max. Capacity(Core / Broach Drilling) 50 mm dia 50 mm Depth Max. Capacity (T.S. Twist Drilling) 23 mm Watts Input (full Load) 1500 Watts No Load Speed Low Gear : 100-265 r.p.m. High Gear : 200-500 r.p.m Spindle Bore 19.05 mm (3 / 4") Approx Net Weight 18.8 kg. Production oriented & accurate core drilling in metal Taper Shank & Twist Drill compatibility
Capacity 40 mm dia 50 mm Depth Watts Input (full Load) 1100 Watts No Load Speed 350 to 600 r.p.m. Spindle Bore 19.05 mm (3 / 4") Approx. Net Weight 14.6 kg. Production oriented & accurate core drilling in metal Electronically controlled 6 speed selector switch Light weight & portable Used in both horizontal & vertical position
Model hl super tech 2 Features * Magnet base size û 355 x 115 x 80mm * Magnet surface/pole apoxy sealed/two pole * Drilling capacity û 19mm, 25mm, 32mm * 2with broach cutter type drill m/c upto100mm * magnet holding power - 2300 kg. * power source - ac 220v 50hz * height û 550mm * stroke û 300mm
MODEL YUVA38 Rated Power 1300W No loading speed 700r/min Magnetic Power 12000N Full Load Current 8Amps. Max hola dia 38mm Max Drill Deepth 50mm Max twist drill 13mm Insulation Grouding ( to earth ) Approx. waight 13kg. 100% Copper powerful motor Two-way allow guide rail, wear resistant and durable Core drill and twist drill, Two function Overloading motor protection, 8A Super powerful magnetic force Easy carry side handel Soft grip drill press handel Accompany with cooling liquid bottle Packing in strong BMC
MODEL NW 50S Capacity 50 mm dia 50 mm Depth Watts Input (full Load) 1600 Watts No Load Speed 450 r.p.m. Spindle Bore 19.05 mm (3 / 4") Approx Net Weight 36 kg. Production oriented & accurate core drilling in metal Rugged construction Al- die cast body
MODEL MEGA - 45 Rated Voltage 220V / 235V AC Frequency Hz 50~60 Power Input Watts 1380W Max Core Drilling Capacity Dia 45 x 50 deep Max Drill with Twist Drill 19mm Max Tapping Dia 3mm to 12mm Max Speed - Variable 100 - 470 rpm Magnetic Adhesion 16500N Magnet base size 202 x 102 x 45 mm Stroke 210rnm N.W. (kg) 19kgs
MODEL ENOVA 40 Capacity(Core Cutting) 40 mm dia 50 mm Depth Watts Input (full Load) 1200 Watts No Load Speed 400 r.p.m. Magnetic Adhesion 1100 KGF Magnet Size 165mm Ã?? 80mm Approx Net Weight 13.2 kg. High magnet holding power of base for better grip Internal coolant system for better cutting action Compact & elegant design
No load speed: 595rpm electric data: 230v/50hz/1200w 120v/60hz/1200w magnetic adhesion: 13000n core sizes: 160*80*50mm stroke: 190mm Steel case 47.5x35.5x14.5cm
Largest hole drill:12-50mm Largest twist drill:23mm Rated voltage:110-230 v Rated frequency:50/60 hz Rated input power:1500w No-load speed:0-680r/min Maxattraction:16500n Max travel:180mm Rotated axis taper:weldon shank 3/4" N.W:21.4kg Packing:wood carton, plastic carton
Largest hole drill:12-45mm Largest twist drill:23mm Rated voltage:110-230 v Rated frequency:50/60 hz Rated input power:1200w No-load speed:100-500r/min Maxattraction:12000n Max travel:180mm Rotated axis taper:mt2 N.W:20kg Packing:wood carton, plastic
Buried Magnet Core Buried Magnet Core PCB, Double Side Fr4 Material PCB, High Quality Aluminum PCB, Rigid PCB, Metal Based PCB, Rigid Circuit , Fr4 PCBA Assembly, Halogen Free PCB, Rogers PCB Manufacturer Product Type: Buried Magnet Core Application Field: Power Supply Transformer Layer/Board Thickness: 4L/2.4mm Suface Finisht: ENIG Trace/Space: 12.2/4.2mil Smallest Hole Diameter: 0.5mm Technical Feature: Blind Hole, Buried Magnet Core As an OEM PCB supplier, PCBMAIN can manufacture rigid PCB such as buried magnet core PCB, double side Fr4 material PCB, high quality aluminum PCB, metal based PCB, rigid circuit , Fr4 PCBA assembly, halogen free PCB, rogers PCB, aluminum board, Fr4 PCB manufacturing, thick copper PCB, high tg Fr4 PCB, arlon PCB, PTFE PCB.
Model FZK-20 Max drilling diameter 200MM Max drilling depth 700MM Output speed 800 1200RPM Engine type Gasoline engine, air-cooled, 4 stroke, single cylinder Power 13.0HP Weight 110kg Packing Size 1400*900*1500MM
Our laboratory core drilling machine / pavement core drilling machine is suitable to drill / cut cores of concrete, rocks, stones, tiles or the similar material. This core drilling machine is the most efficient light weight, portable unit & has been designed specifically for the purpose of drilling test cores / holes in concrete / bitumen from road, bridges & airport runways etc. The machine is suitable for core samples of size up to 150 mm diameter with the help of thin walled diamond bits which are at extra cost. The drill portion is supported on two columns. The machine has two speed driven by ‘v’ belt & has arrangement of water tank for coolant purpose. The machine is mounted on a light weight, but strong steel base & the base is mounted on two tyres for easy towing on road by car / van / jeep. While drilling it can be mounted on four bolts for jacking. The machine has two versions: 1. One is motorized which is fitted with 3 h. P. Electric motor suitable to operate on 230 volts ac, single phase. 2. Another is diesel engine driven which is fitted with 4 or 5 h. P diesel engine. Accessories: 1. Thin wall diamond bits. 2. Core barrel
Magnet materials: 1)ndfeb material(sintered and bonded) 2)hard ferrite(sr ferrite and ba ferrite) 3)smco(1:5 and 2:17) 4)alnico(casting and sintering) 5)rubber magnet 6)soft magnet(mn-zn and ni-zn) 7)injection magnet(ndfeb and ferrite) Surface treatment: 1)plating (ni, zn, cr, cu, ar¦.) 2)coating(epoxy resin) 3)spray coating(epoxy resin) 1. Bonded ndfeb magnets 2. Sintered ndfeb magnets 3. Ferrites > sintered hard ferrite > soft ferrite-mnzn ferrite > soft ferrite-nizn ferrite 4 smco magnets 5 cast and sintered alnico magnets
A. Slick Drill Collar Note: Drill collar is mainly used to provide bit weight to drill bit so that drill pipe is in tension. Especially drill collar can keep drill bit centralized and hole track by large rigidity. The Drill collar are manufactured strictly from API Spec7-1 and SY5411 standard. B. Spiral Drill Collar Note: Spiral drill collar is used to reduce contact area with hole so as to avoid efficiently bit sticking from diffirential pressure. The drill collars are manufactired strictly according to API Spec7-1 and Standard SY5144 C. Spiral Drill Collar With Elevator Groove And Slip Groove Note: Elevator groove and slip groove made on box thread face of slick drill collar or spiral drill collar can be used as lifting sub and safety slip when trip out. The technical parameters for elevator groove and slip groove is as per API SPEC7-1. Hardbanding is optional at customersâ?? requests. D. Non-magnetic Drill Collar The as cold rooled finish on both ID and OD surface with unique technical process strengthen the structure and ensures the tools with optimal resistance to stress,corrosion,cracking and the mechanical performance is greatly enganced.
The as cold rolled finish on both ID and OD surface with unique technical process strengthen the structure and ensures the tools with optimal resistance to stress, corrosion, cracking and the mechanical performance is greatly enhanced as required
