Industrial design, stable and reliable, suitable for harsh environment; Support 4, 8 and 16 digital DO outputs, widely used; DO1 supports PWM high-speed pulse output, frequency: 10Hz ~ 300KHz; DO2 can be used to control the direction output of stepper motor and servo motor; 1 RS485 supports Modbus master and slave protocol for expanding IO or HMI; One RJ45 Ethernet interface supports TCP Server and TCP Client services; Support Modbus TCP and MQTT protocols, can access SCADA, MES and cloud platforms; As a TCP server, it can support 5 TCP links at the same time.
The M120 Ethernet Remote I/O Module is an industrial class, isolated designed, high reliability, high stability and high precision data acquisition module, embedded 32-Bit High Performance Microprocessor MCU, Integrated 1-2 Industrial 10/100M adaptive Ethernet module inside. It provides multi I/O, supports standard Modbus TCP, can be intergraded into SCADA, OPC server, and other automation systems. It is design for working in the harsh industrial application environment, widely used in a variety of industrial automation, security monitoring system, automatically measurement and control system. The M120T Ethernet Remote I/O module provides a RS485 interface, through the RS485 bus, it can cascade Modbus RTU I/O devices or Modbus RTU meters, e.g.: a variety of digital input or digital outputs, analog inputs or outputs, thermal resistance IO module combination, save costs. At the same time, the Ethernet Remote I/O module has register mapping function, the cascade Modbus RTU I/O data are automatically collected to the mapping memory area, the Modbus TCP Client query without waiting then can get a quick response to meet the industrial timely requirements. The M120T Ethernet Remote I/O module provides 4 optical-isolated digital inputs, supports max. 700KHz high speed pulse counter, 4 isolated 12bits analog inputs, supports 0~5V,0~10V,4~20mA,0~20mA analog signal, 4 digital outputs, supports 10Hz~300KHz high speed pulse output or relay outputs, 2 channel 12bits analog outputs, supports 0~10VDC signal output. All of the I/O with high sampling frequency and special filtering strategy to ensure it reliable.
The M160T Ethernet Remote I/O module provides 8 optical-isolated digital inputs, supports max. 10Mhz high speed pulse counter, 8 isolated 12bits analog inputs, supports 0~5V,0~10V,4~20mA,0~20mA analog signal, 8 digital outputs, supports 10Hz~300Khz high speed pulse output or relay outputs. All of the I/O with high sampling frequency and special filtering strategy to ensure itâ??s reliable. It is design for working in the harsh industrial application environment, widely used in a variety of industrial automation, security monitoring system, automatically measurement and control system. 1. Embedded 32-Bit High Performance Microprocessor MCU, inbuilt watchdog; 2. Power supply 12~36VDC with over voltage and phase-reversal protection; 3. Supports TCP Server, TCP Client, Modbus TCP, MQTT Protocols; 4. DO1 support PWM output; 5. Management and configuration via LAN connection configuration software for easy operation and maintenance; 6. 8 optical isolated digital input, supports max. 700khz high speed pulse counter; 7. 8 digital output or relay output, supports 10Hz~300KHz high speed pulse output; 8. 8 isolated analog input, 12-bit resolution, supports 0~20mA,4~20mA,0-5VDC, 0-10VDC; 9. High sampling frequency and special filtering strategy to ensure reliability; 10.1 RS485 Serial port, supports Modbus RTU Master or Slave, can extend I/O modules; 11.Supports register mapping function and extend I/O inquiry strategy; 12.Provides 1 channel 12~36VDC power source output for external device, saving wiring cost; 13.LED instructions work status, with reset button to reset, easy on-site installation and commissioning; 14.Using metal shell, protection class IP30. Metal shell and system security isolation, especially suitable for industrial applications in the field; 13.Small size, L105 * W88 * H30mm, compatible wall installation and DIN35mm industrial rail installation.
1. Embedded 32-Bit High Performance Microprocessor MCU, inbuilt watchdog; 2. Power supply 12~36VDC with over voltage and phase-reversal protection; 3. Supports TCP Server, TCP Client, Modbus TCP, MQTT Protocols; 4. DO1 support PWM output; 5. Management and configuration via LAN connection configuration software for easy operation and maintenance; 6. 8 optical isolated digital input, supports max. 700khz high speed pulse counter; 7. 8 digital output or relay output, supports 10Hz~300KHz high speed pulse output; 8. 8 isolated analog input, 12-bit resolution, supports 0~20mA,4~20mA,0-5VDC, 0-10VDC; 9. High sampling frequency and special filtering strategy to ensure reliability; 10.1 RS485 Serial port, supports Modbus RTU Master or Slave, can extend I/O modules; 11.Supports register mapping function and extend I/O inquiry strategy; 12.Provides 1 channel 12~36VDC power source output for external device, saving wiring cost; 13.LED instructions work status, with reset button to reset, easy on-site installation and commissioning; 14.Using metal shell, protection class IP30. Metal shell and system security isolation, especially suitable for industrial applications in the field; 13.Small size, L105 * W88 * H30mm, compatible wall installation and DIN35mm industrial rail installation.
OPC UA I/O Controller BL200UA is a new type of I/O system that special designed for Industrial 4.0, it supports OPC UA Protocol, built-in programmable logic control, edge computing. it suitable for IIoT Application and Industrial Automation. The EdgeIO I/O Controller BL200 includes lots of advantages to ensure its suitable for Industrial Automation and IIOT Applications. EdgeIO BL200 supports Scalable Networking, can connect one by one to save wiring costs. The EdgeIO BL200 suitable for IIOT Applications, built-in Cloud Drivers, the users can click then connect to cloud platforms. The EdgeIO BL200 supports Cyber Security and Data Security, provides VPN, SNMP, TLS, SSL, etc. The EdgeIO BL200 can be used as a simply PLC, connect IT and OT directly, easy to create the IIOT Solutions. Saving wires and wiring cost, make it more easier and cost-effective to you industrial applications.
The Cellular IoT Gateway provides 1 ambient sensor input for monitoring onsite temperature and humidity,supports dual sim card,with 2 RS485 serial port, supports 320 extend I/O tags via Modbus RTU protocol. It can monitoring and operates the RS485 ports and extend I/O tags by SMS, APP, Web Server, internet.Supports SMS,GPRS,3G,4G Lte Cellular Networks.Compatible Modbus TCP and MQTT IoT Protocols and can intergrate to the KPIIOT IoT Cloud Platform and OPC, SCADA and MES systems to build an industiral IoT Solution. 1. Can be operated from anywhere, no distance limitation; 2. Quad band 850/900/1800/1900Mhz GSM GPRS Module inside. 3. 3G/4G/NB-IoT Modules are optional; 4. Modular design, can easily upgrade the cellular module if network upgrade; 5. Embedded ARM�® Cortexâ?¢-M4 32 Bit RISC Core, 168 MHz inside, RTOS system, reliable performance with in-built watchdog; 6. Wide range power supply 9~36VDC with over voltage and phase-reversal protection; 7. 1 ambient sensor input for monitoring onsite temperature and humidity; 8. Resend the data while communication failure and alert to users by SMS; 9. Inbuilt TCP/IP protocol stack, supports cloud, APP and web server applications. 10. Supports Modbus TCP protocol, can integrate to SCADA,HMI,DSC directly. 11. 2 RS485 port supports Modbus RTU Master and Slave, can be used to extend I/O ports or meters; 12. Supports SMS Alert when I/O triggered or recovery, and external power lost or recovery; 13. Provides 1 channel 9~36VDC power source output for external device, saving wiring cost; 14. Up to 10 SMS Alert and dial numbers, can program to receive specified alarm message. 15. Inbuilt 8G SD card to save up to 100000 historical data and events; 16. Inbuilt large capacity automatically rechargeable backup battery; 17. Industrial class design suitable for long time work applications; 18. using metal shell, protection class IP30. Metal shell and system security isolation, especially suitable for industrial applications in the field; 19. L70 * W88 * H30mm, compatible wall installation and DIN35mm industrial rail installation.
BL110 is IoT gateway which can be used to convert PLC, BACnet, Modbus, DLT645 to BACnet IP, MQTT, OPC UA, Modbus TCP protocols, and then connected to cloud platform through 4G or Ethernet. It can be connected HUAWEI Cloud, Alibaba Cloud, Thingsboard, AWS and other cloud platforms. It supports RS485 communication, and it can collect 4,000 data points from 100 devices at the same time. It also has VPN network security, TLS SSL data encryption, and data supplementary transmission functions.
"FAMAGA Group OHG, the global supplier of industrial equipment and spare parts, is glad to provide encoders by Ethernet Gateways for the SIMATIC IBH Softec: We supply a complete range of the manufacturerâ??s catalog, including the following items: Ethernet Gateways for the SIMATIC 20266 Ethernet Gateways for the SIMATIC 20220 Ethernet Gateways for the SIMATIC 20284 Ethernet Gateways for the SIMATIC 20268 Ethernet Gateways for the SIMATIC 1150 Our company is also pleased to offer products of other brands: Bei Sensors IBH Softec Schmersal BALLUFF Pepperl+Fuchs Bernstein Di-Soric Elobau Univer Eltra Aventics FESTO Camozzi Euchner END-Armaturen TAMAGAWA SENECA Airtac Murrelektronik Azbil Yamatake FRANKE-Filter Endress+Hauser IFM Ipf Electronic Kieback & Peter MD Micro Detectors Bihl Wiedemann ANDERSON-NEGELE KITAGAWA Georg Schlegel Metal Work Kipp Allen-Bradley Netter Vibration Kuebler / K�¼bler RAFI LINDY 4B Braime SOUTHCO ELGO Electronic FAG RECO Pilz AIRTEC Pneumatic COMITRONIC-BTI L�¼tze Hydac Barksdale Keyence AirCom Pneumatic Garlock Mac Valves MAHLE (Filtration Group) Riegler Baumer Elreha Sick Siko FAMAGA Group OHG is a family-owned company with many years of experience in the supply of components and spare parts for industrial enterprises around the world. Our mission is to provide fair prices, reducing the cost of production for our customers. A significant network of suppliers around the world allows us to supply any equipment, which client needs on favorable terms. Therefore, the list of equipment we provide is tenfold greater than the catalog presented on this site. You are welcome to check the full catalog on our website."
DC POWER INPUT 9-30V Wide DC input @1A (non-isolated) Accidental reverse voltage, ESD (IEC61000-4-2 level 4), EFT (IEC61000-4-4 level 2) and Surge (IEC61000-4-5 level 1) protected. Internal Overvoltage, Over current protection Internal circuitry to enable remote power ON/OFF of 12V rail. Connection by means of 2 piece pluggable screw terminal connector CELLULAR INTERFACE Based on Sierra Wireless Module LTE CAT4 cellular connectivity with UMTS/GPRS fallback ï?·Following key features of the Module 4G LTE CAT4 : B1 / B3 / B5 / B8 / B40 / B41 3G UMTS/HSPA+: B1/ B8 2G EDGE/GSM/GPRS: 900/ 1800 MHz Interfaces Two SMA connectors for External Main and Diversity Antennas Single Nano SIM USB INTERFACE Micro USB interface for connecting Host. Enumerate like ECM port GPS Supports RF bands of GPS, GLONASS, Galileo, BeiDou SMA connector for External Antenna Supports active or Passive by assembly option 3.7V at 20mA available for supporting active antenna 10/100 ETHERNET INTERFACE One 10/100 Ethernet Interface ESD (IEC61000-4-2 level 4), EFT (IEC61000-4-4 level 2) and Surge (IEC61000-4-5 level 2) protected. Connection by means of standard RJ-45 connector STORAGE SD Card socket for Internal Data storage
8001b is a 8-channel gsm fixed wireless terminal. It can produce a fxs line to allow a regular phone to be connected and used just like a local landline(pstn) except your calls will go out the gsm network. This device can both receive and make calls. The main application is: connecting the rj-11 fxs line to connect ordinary telephone set for voice call, to connect pbx for call extentions, to connect billing systems for public phone use, to connect voip gateway to realize voip call termination, to connect alarm system for security purpose, etc. It is not a voip gateway, nor a gsm+voip gateway, it is a gsm fixed wireless terminal that produces a analog fxs phone line. 1.It is a 8-channel gsm fixed wireless terminal that has 8 ports fxs interfaces; 2.Each port has 1 sim card (1.8v, 3v) 3.It can connect with ordinary telephone set, pbx, voip gateway, billing meter etc. 4.It is compatible with asterisk 5.Dialing tone frequency: 450hz 6.Employ industrial module (850/900/1800/1900mhz) 7.Can adjust voice volume by setting up from telephone set 8.Caller id display nal strength by led indicator 16.Imei change Carton
The Dual Simcard Cellular IoT Modbus RTU is design for working in the harsh industrial application environment, converting Modbus TCP/RTU to SMS and cloud platform. widely used in a variety of industrial automation, security monitoring system, automatically measurement and control system, BTS monitoring, remote data acquisition, telemetrically systems, automatically control system. It can be used as a remote switch, remote I/O, remote smart PLC, timer switches. Supports SMS,GPRS,3G, 4G Lte Cellular Networks.Compatible Modbus TCP and MQTT IoT Protocols and can intergrate to the KPIIOT IoT Cloud Platform and OPC, SCADA and MES systems.
The Cellular IoT RTU is an industrial class, high reliability, high stability, and programmable Remote Terminal Unit (RTU). It embedded 32-Bit High Performance Microprocessor MCU, inbuilt industrial Cellular module. It provides 8 digital inputs, 6 analog(ultra high 24 bit resolution) or PT100 Resistance Temperature Detector (RTD) inputs, 4 relay outputs, 1 ambient sensor input for monitoring onsite temperature and humidity, 1 Ethernet RJ45 port for connect internet WAN or LAN, supports dual nano sim card, with 2 RS485 serial port, supports 224 mapping registers via Modbus RTU protocol. It can monitoring and operates the I/O ports by SMS, APP, Web Server, internet, timers and programmed inter-lock events automatically.
Battery Monitoring Module BMS100 can be used in various industrial automation measurement and control systems. It can measure 4-20mA and 0-5V transducer signal of pressure, temperature,current,etc.It can measure server room battery management and voltage of each battery in each group. 1.Acquisition 2/4 channels of analog input 4 ï½? 20mA, 0 ï½? 5V, optional; 2.Adopt 12-bit AD acquisition processing, high accuracy measurement; 3.Standard Modbus-RTU protocol; 4.RS-485 (RS-422 optional) communication interface with ESD protection circuit; 5.Wide working voltage DC9 ï½? 36V, with anti-reverse protection function ; 6.Using industrial-grade chip, built-in watchdog, and has perfect anti-lightning and anti-interference measures to ensure reliability; 7.Configurable maximum and minimum value of analog input, intelligent conversion of actual value, convenient for various analog measurement requirements; 8.Can measure 12 single battery voltages,several battery group and 1 total voltage; 9.It has 3 precision gears for different voltage ranges to improve the voltage measurement accuracy; 10.With LED light to indicate working status, easy to install and debug on site.
Product Description - MT 50 Un-Contact Based Thermal Network Camera Price of product ( USD price or FOB price) - FOB USD $399 Product origin - Made in Korea Key Specifications/Special Features - Application for fever detecting , Fire Signal Alarm and Security Multi Camera monitoring from anywhere/ anytime with PC, NVR & Smartphone Accurate temperature measurement by by Calibration and Blackbody function Face Recognition : AI / Machine learning Camera :80x60 Shuttered or Shuttuerless sensor Module, Ethernet, H.264, ONVIF Monitoring System: PC Viewer, Smartphone Viewer APP( Android, IOS) Server: p2p Relay Server (any Where, Real time ) Frame rate: 1~30 Frame / sec Power: 5V/1A, POE Splitter Measuring range: -20 C~100 C (Extensible to 200 C) Minimum Order Size and Packgaing details - MOQ :20 Inbox :One Camera
Name: CANopen RTD Remote IO Module (8RTD) Model No.: M340c The M340c CANopen RTD Remote I/O Module is an industrial class, high reliability, high stability and high precision data acquisition module, embedded 32-Bit High Performance Microprocessor MCU, provides a CANBus interface. It provides multi I/O, supports standard CANopen Protocol, can be intergraded into SCADA, OPC server, and other automation systems. It is design for working in the harsh industrial application environment, widely used in a variety of industrial automation, security monitoring system, automatically measurement and control system. The M340c CANopenRTD Remote I/O module provides 8 RTD inputs, supports PT100 and PT1000 resistance sensor, compatible 2 or 3 wires, the resolution is 0.1°C, measure range -120°C ~420°C. All of the I/O with high sampling frequency and special filtering strategy to ensure its reliable. The M340c CANopenRTD Remote I/O module can work at 12~36VDC with anti-reverse protection design. Main Feature: 1) Embedded 32-Bit High Performance Microprocessor MCU, inbuilt watchdog; 2) Power supply 12~36VDC with over voltage and phase-reversal protection; 3) 1 CANBUS Interface, comply with CANopen specification CiA301,CiA401; 4) Group 2 Only Server (non UCMM-capable) ; 5) Support Predefined Master/Slave Connection Set; 6) Support CANopen heartbeat and shutdown messages; 7) Provide EDS file for standard CANopen master interface; 8) 8 RTD input support PT100 and PT1000 resistance sensor, compatible 2 or 3 wires, measure range -120°C ~420°C; 9) High sampling frequency and special filtering strategy to ensure reliability; 10) LED instructions work status, with reset button to reset, easy on-site installation and commissioning; 11) Using metal shell, protection class IP30. Metal shell and system security isolation, especially suitable for industrial applications in the field; 12) Small size, L105 * W88 * H30mm, compatible wall installation and DIN35mm industrial rail installation.
Model noï¼?S281 The Lora Gateway S281 is the latest Lora technology for industrial internet of things solutions. It supports upto 99 wireless temperature humidity modules, and 99 wireless serial port modules with a monitoring radius of upto 2500m.it is widely used in agricultural greenhouse temperature and humidity collection and monitoring, chemical plant temperature and humidity collection and monitoring, electroplating plant temperature and humidity collection and monitoring, hospital sites and fruit and vegetable storage warehouses and other places temperature and humidity collection and monitoring. Supports SMS,GPRS,3G, 4G Lte Cellular Networks.Compatible Modbus TCP and MQTT IoT Protocols and can intergrate to the KPIIOT IoT Cloud Platform and OPC, SCADA and MES systems to build an industiral IoT Solution.
Gprs Io Gateway Item Code: Wct-710 Gprs I/O Gateway Wct-710 Is A Smart Connectivity Of Ios, Designed To Monitor And Control Your I/O Ports, Interfaces Etc. Also Known As Got (Gprs Of Things), Which We Can Control And Monitor Any Time, Any Where. The Device Can Configured Or Update Firmware Over The Air (Ota). Features: 8 Digital Inputs 2 Analog Inputs 2 Relay Outputs 1 Wire Interface Temperature Sensor Interface Status Leds Remote Configuration Via Sms/Gprs Other Information: Monitor And Control Your I/O Ports, Interfaces Any Where, Any Time.
Gprs Io Gateway Item Code: Wct-710 Gprs I/O Gateway Wct-710 Is A Smart Connectivity Of Ios, Designed To Monitor And Control Your I/O Ports, Interfaces Etc. Also Known As Got (Gprs Of Things), Which We Can Control And Monitor Any Time, Any Where. The Device Can Configured Or Update Firmware Over The Air (Ota). Features: 8 Digital Inputs 2 Analog Inputs 2 Relay Outputs 1 Wire Interface Temperature Sensor Interface Status Leds Remote Configuration Via Sms/Gprs Other Information: Monitor And Control Your I/O Ports, Interfaces Any Where, Any Time.
ProfiNet IO Coupler BL200PN designed for industrial Real Time Ethernet, it adopts embedded Linux system, equips with Real-Time Ethernet interface chip and a dual-port memory supports two communication channels for Real-Time Ethernet equipped with PHY or fieldbus compatible with PROFINET fast SPI host interface with Read/Write functions. ProfiNet IO Coupler BL200PN supports dual network port cascade communication, and can support up to 32 IO modules, including AI, AO, DI, DO, RTD, TC, RS485, RS232, etc., ProfiNet IO Coupler BL200PN integrates a Network controller for fieldbus and Real-Time Ethernet slaves, suitable for creating a high-speed, stable and reliable Industrial Real-Time Ethernet networks and profinet fieldbus network. Saving wires and wiring cost, make it more easier and cost-effective to you industrial applications.
EDAM-9017 Ethernet-Based 8-ch Isolated Analog Input Module * Support protocol Modbus / TCP/ IP, UDP, JCMP, ARP * Provides two digital outputs (open collector) * Ethernet 10/100 Based-T communication * Support isolated input channels * Support +- V, +- mV, mA analog input * Fully photo-isolation 3750Vms * Built-in TVS/ESD protection * Wide supply voltage (10-30V)
