Find Verified Low Pressure Plastic Misting Nozzle Suppliers, Manufacturers and Wholesalers

Material:PP.
Features: 1.All the parts are precisely manufactured, the spray particles is 20-40 micro ,
2.Spray Angle: 80-90 degrees,
3. Water output: 1.6-3.4/hr,
4.Water system pressure: 3-14 kg,
5.The cove
Adveantages:it features a strainer inside which can gurantee no-clogging being blocked and more durable. It also has the function of anti-drip that the nozzle will not drip when the pressre system is closed.

Nozzle body is made of brasss, with stainless steel nozzle core and stainless steel flow leading vane(include a leakproof device) inside. Under hydraulic pressure of 70kg/cmâ² to 120kg/cmâ², it flows with high speed and forms centrifugal volution in flow leading vane. Then it sprays tiny hollow spraying drop of around 50 um with teflon which can be widely applied in moisturization and man-made mist. Mesh, it introduced american driller for drill of spray hole, with hole diameter of 0.1mm to 0.15mm. Compared with air moisturization, it cuts cost by ten times.

Guar Gum Types

Food, Feed & Pharma Grades
- Various particle sizes (very coarse to very fine).
- • Various hydration rates (very slow to very fast).
- • Various viscosities (1% solution in water = 50 cps to 7000 cps).
- • Special deodourised grades.
- • Special low microbiological count grades.
Technical Grades
Straight Guars:
- Various particle sizes (very coarse to very fine).
- Various hydration rates (very slow to very fast).
- Various viscosities (1% solution in water = 50 cps to 8000 cps).
- Special good Dry-Flow (Free-Flow) Guars.
- Special Anti-Dusted Guars.
Modified Guars and Guar Derivatives:
- Fast hydrating / High Viscosity / Diesel Slurriable (particularly suitable for oil, gas and other deep well drilling and EOR operations like polymer flooding / fracturing),
- Borated.
- Reticulated.
- Oxidised.
- Depolymerised.
- High water absorbance capacity.
- Carboxymethyl (Anionic).
- Hydroxypropyl (Nonionic).
- Hydroxypropyltrimethyl chloride (Cationic).
- Hydroxypropyltrimethyl chloride Hydroxypropyl (Cationic, double derivative).
- Special good Dry-Flow (Free-Flow) Modified Guars / Guar Derivatives.
- Special Anti-Dusted Modified Guars / Guar Derivatives.

Guar gum is a fiber from the seed of the guar plant.
Guar gum is used as a laxative. It is also used for treating diarrhea, irritable bowel syndrome (IBS), obesity, and diabetes; for reducing cholesterol; and for preventing “hardening of the arteries” (atherosclerosis).
In foods and beverages, guar gum is used as a thickening, stabilizing, suspending, and binding agent.
In manufacturing, guar gum is used as a binding agent in tablets, and as a thickening agent in lotions and creams.
How does it work?
Guar gum is a fiber that normalizes the moisture content of the stool, absorbing excess liquid in diarrhea, and softening the stool in constipation. It also might help decrease the amount of cholesterol and glucose that is absorbed in the stomach and intestines.
There is some interest in using guar gum for weight loss because it expands in the intestine, causing a sense of fullness. This may decrease appetite.
USES:
Diarrhea. Adding guar gum to the tube feeding formula given to critical care patients may shorten episodes of diarrhea from about 30 days to about 8 days.
High cholesterol. Taking guar gum seems to lower cholesterol levels in people with high cholesterol. Guar gum and pectin, taken with small amounts of insoluble fiber, also lower total and “bad” low-density lipoprotein (LDL) cholesterol, but don't affect “good” high-density lipoprotein (HDL) cholesterol or other blood fats called triglycerides.
Diabetes. Taking guar gum with meals seems to lower blood sugar after meals in people with diabetes. By slowing stomach emptying, guar gum may also lessen after-meal drops in blood pressure that occur frequently in people with diabetes.
Constipation.
Irritable bowel syndrome (IBS).

Product Features
The purity of the product, calcium and phosphorus ratio appropriate to ensure a higher degree of its biological effects. Phosphorus content greater than 21% of the products, their biological effects better. This unique high-tech companies use technology to make our products crystallization, high purity.
Drying process advanced products, products with low free water under the premise that the product does not lose crystallization of water, avoid the product in the drying process for the loss of water caused by crystallization of biological effects of the reduction.
coarse particles MDCP in the animals stay in the stomach longer and more conducive to the absorption of calcium phosphate, the product produced by micro-particles MDCP form, without any chemical binder.

Specifications
Appearance white powder or granule
Phosphate  21% min
Calcium     15% min
Fluorine    0.18% max
Arsenic    30ppm max
Pb   30ppm max

Source of OriginRock

Packing and Storage
Knitted bags lined polyethylene plastic bags
double packaging, Weighing 25Kg.
Transportation-and harsh rain.
Stored in a cool, ventilated, dry place.

Monocalcium Phosphate (MCP) Feed grade

Product Features
The purity of the product, calcium and phosphorus ratio appropriate to ensure a higher degree of its biological effects. Phosphorus content greater than 22% of the products, their biological effects better.
This unique high-tech companies use technology to make our products crystallization, high purity and its harmful impurities significantly below
standards:HG28611997
Drying process advanced products, products with low free water under the premise that the product does not lose crystallization of water, avoid the product in the drying process for the loss of water caused by crystallization of biological effects of the reduction.

Specifications
Appearance white powder or granule
Total P 22%min
Ca 13-18%
F 0.18% max
As 10 ppm max
Pb 10ppm max
Moisture 4%max

Source of OriginRock

Packing and Storage Knitted bags lined polyethylene plastic bags double
packaging, Weighing 25Kg. Transportation-and harsh rain. Stored in a cool, ventilated, dry place

Focus-6200 products are kind of non-hardening and self-adhesive waterproof sealing butyl tapes. The materials are weathering resistance and fully accommodate to the surface that it attached to, with effective life up to 20 years.
Main Specification
(Customized size is acceptable.)
2mm thickness * 20mm width * 20mm roll
length 2mm thickness * 30mm width *20mm roll length

Main Color - black, grey, white

Technical Data
Product Series FOCUS-6200 Series
Application Construction Industry
Elongation - 500%
Heat Resistance 90, no flowing within 2h
Low Temperature Flexibility 40, no crack on surface within 24h
Peel Strength 25N/cm
Tensile Strength 250KPa
Anti UV non-hardening and no cracks within in 2000h
Corrosivity Non-corrosive to galvanizedsheet, aluminum sheet and coppersheet

Advantages
* Never hardening, maintain good waterproofing property with weathering resistance performance.
* Excellent performance in waterproofing and sealing.

* Good anti-aging performance effective life up to 20years.

* Easy to apply.

Applications
* Provide waterproof and sealing protection forsteel
structure construction.

* Provide waterproof and sealing protection for door joints, window joints,roofs
and air-ducts. Provide waterproof and sealing protection for sunshine rooms, light plate rooms and thermostatic chamber.

* Provide repair function for leaks on surfaces of metal/plastic/glass/concrete.

Commodity: Calcium chloride
Molecular formula CaCl2
H.S code 28272000

Product feature
Calcium chloride is an inorganic salt, which exists as solid or liquid. Solid calcium chloride is a white, crystal substance in the form of flake, granule, pellet or powder. With different crystallized water contents, it can be dihydrate or anhydrous.

Liquid calcium chloride is a colorless, clear solution. As calcium chloride has such properties as quick dissolving, exothermic ability, attracting moisture from the air and surroundings, dissolving at very low temperature,

Specifications:
Analysis Item Standard
Calcium chloride (CaCl2) 74%min,77% min,94%min
Total Chlorinated Alkali: (NaCl) 5.0%max
Magnesium Chloride(MgCl2) 0.5%max
Insoluble matter in water 0.25%max
Calcium Sulfate (CaSO4): 0.2%max
Ferric Oxide (Fe2O3) 0.025%max
Heavy Metal as Cu., Pb., Cd., Cr., Hg., As 0.005%max

Application
Mainly used in drying, melting snow for airport express and street, concrete desiccant and concreting fast, removing dust and oil industry.

Exporting Packing :Plastic woven bag with PE ,25kg/50kg/1000kgs net weight or 25kg x 40 bags into one big bag or 40 bags on a pallet with shrink-wrapped

Means of transportation :in containers or by bulk vessel with large quantity

Commodity: Dicalcium phosphate Feed Grade
Use
DCP is the feed preparation of raw materials, Animal right to supplement calcium needs. Coarse its products more applicable to the preparation hens, ducks feed, concentrate feed and premix.
Product Nature
Molecular Formula:CaHPO4·2H2O,Molecular weight:172.09,After drying with loose white powdery crystals or granules. Neutral products, the melting acid, water-soluble, hygroscopicity small, heated to 90 around gradually lose water of crystallization.

Product Features
The purity of the product, calcium and phosphorus ratio appropriate to ensure a higher degree of its biological effects. Phosphorus content greater than 18% of the products, due to a small amount of MCP, and its biological effects better.
This unique high-tech companies use technology to make our products crystallization, high purity and its harmful impurities significantly below standards:HG26362000
Drying process advanced products, products with low free water under the premise that the product does not lose crystallization of water, avoid the product in the drying process for the loss of water caused by crystallization of biological effects of the reduction.
Coarse particle DCP in the animals stay in the stomach longer and more conducive to the absorption of calcium phosphate, the product of Micro-particle DCP granulation from mechanical, without any chemical binder.

Specifications
Appearance white and gray powder/granule
Total P 18% min
Calcium 21% min 
F 0.18% max
As 30 ppm max
Pb 30 ppm max

Packing and Storage
Knitted bags lined polyethylene plastic bags double packaging, Weighing 25Kg/50KG/1000Kg. Transportation-and harsh rain. Stored in a cool, ventilated, dry place.

PPE material (called Polyphenylene Ether). PPE resin, exhibits low moisture absorption due to its inherent composition. Therefore, good electrical insulation properties will be achieved under temperature and humidity conditions. Chemical reaction from water, most salts, acids and bases is also minimal with PPE material.

MATERIAL: PPE regrind black
CATEGORY: PPE
TYPE: regrind
GRADE: black
SPECIFICATION: Grade V-0, engineering plastic
Origin: Japan
LOADING WEIGHT: 25 Ton
FOB (USD/Ton): 900$ - 1000$
Packaging: Jumbo Bag
Est. Shipping Time: 15, 30, 45 days


PPE Plastic Provides:
Good electrical insulation properties
Long term dimensional stability
Outstanding impact resistance
Light-weight
Heat resistance
Good hydrolysis stability

PC regrind mixed color - Origin Japan


Technical applications
If you do not know what common applications of PC plastic are, in addition to the use of food containers, drinking cups, bottles or travel suitcases, PC plastic is also used in engineering fields such as making dashboards. control and system of pipes or cardboard for writing liner, bulletproof glass, spare parts for slide show equipment. However, with technical application, PC plastic has certain disadvantages with low durability, so it is only suitable as accessories.

MATERIAL: PC regrind mixed color
CATEGORY: PC
TYPE: egrind
GRADE: mixed color
SPECIFICATION: From sheet and It's a part of an electrical appliance
Origin: Japan
LOADING WEIGHT: 24 Ton
FOB (USD/Ton): 900$ - 1100$
Packaging: Jumbo Bag
Est. Shipping Time: 15, 30, 45 days

Technical applications

If you do not know what common applications of PC plastic are, in addition to the use of food containers, drinking cups, bottles or travel suitcases, PC plastic is also used in engineering fields such as making dashboards. control and system of pipes or cardboard for writing liner, bulletproof glass, spare parts for slide show equipment. However, with technical application, PC plastic has certain disadvantages with low durability, so it is only suitable as accessories.

MATERIAL: PC regrind natural color
CATEGORY: PC
TYPE: regrind
GRADE: natural color
SPECIFICATION: From sheet and It's a part of an electrical appliance
Origin: Japan
LOADING WEIGHT: 24 Ton
FOB (USD/Ton): 1200$ - 1400$
Packaging: Jumbo Bag
Est. Shipping Time: 15, 30, 45 days

PC-GF 20% regrind black color - Origin Japan has been processed into plastic particles, which are very convenient for transportation as well as in the recycling process to create new products. We always provide the same products as reality, and we use 100% real images.

Technical applications

If you do not know what common applications of PC plastic are, in addition to the use of food containers, drinking cups, bottles or travel suitcases, PC plastic is also used in engineering fields such as making dashboards. control and system of pipes or cardboard for writing liner, bulletproof glass, spare parts for slide show equipment. However, with technical application, PC plastic has certain disadvantages with low durability, so it is only suitable as accessories.

MATERIAL: PC-GF 20% regrind black color
CATEGORY: PC-GF 20%
TYPE: regrind
GRADE: black color
SPECIFICATION: From sheet and It's a part of an electrical appliance
Origin: Japan
LOADING WEIGHT: 24 Ton
FOB (USD/Ton): 600$ - 900$
Packaging: Jumbo Bag
Est. Shipping Time: 15, 30, 45 days

What is PMMA plastic
PMMA resin is also known as acrylic resin, organic glass or glass acrylic. Although not glass, in terms of technical surface, PMMA is quite similar to glass. PMMA is often used in the form of sheets and pieces with good impact resistance, high scratch resistance, and good light exposure. As a good economic alternative to glass, glass, Polycarbonate due to its low cost, it is suitable for projects that require good bearing capacity, difficult to break without high hardness

MATERIAL:PMMA plastic repro pellet transparent yellowish
CATEGORY: PMMA
TYPE: repro pellet
GRADE: Transparent Yellowish
SPECIFICATION: Repro from film. Color tone is due to UVA additives
Origin: Japan
LOADING WEIGHT: 24 Ton
FOB (USD/Ton): 1450$ - 1700$
Packaging: Jumbo Bag
Est. Shipping Time: 15, 30, 45 days

Mist nozzle.

ABS Regrind ,Yes No Fr, NO pc abs, no iron, no circuit etc

ABS has excellent mechanical properties, excellent impact resistance and can be used at extremely low temperatures. ABS has excellent wear resistance, good dimensional stability and oil resistance, and can be used for bearings under medium loads and speeds. ABS's creep resistance is greater than PSF and PC, but smaller than PA and POM. The flexural and compressive strength of ABS are poor in plastics. The mechanical properties of ABS are greatly influenced by temperature.

ABS is flammable material and belongs to HB class according to UL94 standard. ABS burns quickly when ignited, and emits a lot of toxic gases and black smoke, which is not conducive to practical application. With the advancement of science and technology and improving the quality of life, everyone's safety awareness is getting stronger. The domestic and foreign countries have put in place strict fire and flame retardant requirements for plastic materials used in automobiles, construction, home appliances, office supplies, etc., and made corresponding technology. Standards and specifications, so research on ABS flame retardants has a very important meaning.

MATERIAL: ABS Regrind ,Yes No Fr, NO pc abs, no iron, no circuit etc
CATEGORY: ABS
TYPE: Regrind
SPECIFICATION: Regrind Abs from post consumer materials ,Yes No Fr, NO pc abs, no iron, no circuit etc. Qty per month 1 container 26 mt
Origin: Bangladesh
LOADING WEIGHT: 26 Ton
FOB (USD/Ton): 750$ - 950$
Packaging: Jumbo Bag
Est. Shipping Time: 15, 30, 45 days

Item Test condition Test Method Value Unit
Density ISO 1183 0.944-0.955 g/cm3
MFR 190 C/2.16kg ISO 1133 0.03-0.07 g/10min
Tensile strength at yield ISO 527-2 22 MPa
Elongation at break ISO 527-2 >350 %
ESCR F50,50 C,100% ASTM D-1693A 1000 h
VICAT ASTM D-1525 126 C

For extrusion packaging film, rope, woven bags, fishing nets, water pipes; injection of low-end commodity and housing, non-bearing load components, plastic box, turnover box; extrusion blow molding containers, hollow products, bottles.

Item Test condition Test Method Value Unit
Density ISO 1183 0.944-0.955 g/cm3
MFR 190 C/2.16kg ISO 1133 0.03-0.07 g/10min
Tensile strength at yield ISO 527-2 22 MPa
Elongation at break ISO 527-2 >350 %
ESCR F50,50 C,100% ASTM D-1693A 1000 h
VICAT ASTM D-1525 126 C

For extrusion packaging film, rope, woven bags, fishing nets, water pipes; injection of low-end commodity and housing, non-bearing load components, plastic box, turnover box; extrusion blow molding containers, hollow products, bottles.

Kaolin:

Kaolin uses are multiple and diverse. Kaolin are used as functional filler, extender, ceramic raw material and pigment because of its whiteness and fine particle size. Kaolin also hold importance as raw material in refractory applications, concrete, rubber and fiber glass manufacturing. We, as a Kaolin Exporter welcome any size of international orders from Middle East and other countries.

Applications:

Paper:
Kaolin used as a coating pigment and as a filler to replace fiber. It possesses desirable optical properties.

Concrete:
Kaolin helps to improve strength and durability of concrete. When added to concrete mix, reacts with free lime released during cement hydration to produce additional cementitious material, resulting in an improved high performance concrete.

Plastics :
Kaolin is widely used as filler in the plastics industry because of its inert chemical nature and its unique size, shape and structure.

Agriculture :
It is used as a carrier and diluent in fertilizers, pesticides and related products. It is suitable as carrier because it aides the retention of the formulations on the plant.

Rubber :
It is commonly used as functional filler in rubber applications. While Kaolin improves overall performance for Rubber in general, different types of white pigment play specific roles in rubber application.

Paint :
Kaolin used as an extender in paints. It reduces the amount of expensive pigment such as Titanium Dioxide. It assists with desirable rheological properties that help maintain proper dispersion and provide bulk to the product.

Ceramic :
Kaolin improves whiteness and brightness of ceramic body. Good plasticity, good shrinkage, low water absorption and casting rate are also very important properties of kaolin.