We offer a wide collection of Lanco type threading chaser die such as threading chaser for pipe, bolt, bar, rebar, rod, PVC pipe & scaffolding pipe. We stand amid the well known steel tangential chasers suppliers in India. We are a specialised G9-power threading tangential chaser manufacturer. This Threading Tangential Chaser is manufactured from metallurgical standard-proven imported high-speed steel. These G9-power Threading Tangential Chasers are designed as per international threading standards, which assist us in manufacturing natural and fine threads. These Landis tangential chasers are available in various lengths ranging from 1" to 6" depending on the size of the die head. BSP, BSPT, NPT, UNF, UNC, and BSW threads can be excellently and easily cut on this tangential chaser. Tangential Chaser Threading Dies are available in various sizes and thread profiles to create different types of threads, such as metric, NPT (National Pipe Thread), UNC (Unified National Coarse), and UNF (Unified National Fine), among others. They are commonly used in manufacturing and repair operations where threaded components are needed, such as in plumbing, automotive, and machinery industries. G9-power Lanco type threading chasers are manufactured from imported High-Speed Steel which must pass exacting metallurgical standards. Experienced heat treatment with the automatically imported heat treatment plant and imported Testing equipments, assures that they will perform satisfactorily in service and produce quality threads within the tolerance for which they were intended. G9-power Chaser is interchangeable. If one Pc. Of a chaser, the set is damaged & is beyond use. The same No. pc. Of the other chaser set lying in stock may be used and there will not be any difference in threading performance the damaged set can be replaced without the necessity of replacing the entire set.
HSS TANGENTIAL CHASERS LANDIS TYPE (SET OF 4 PCS) 2.1/8 INCH x 15/16 INCH - USD 60.00 3 INCH x 1.3/64 INCH -------USD 60.00 4 INCH x 1.3/64 INCH -------USD 80.00 4 INCH x 1.7/64 INCH -------USD 80.00 4 INCH x 1.1/4 INCH--------USD 120.00 5 INCH x 1.1/2 INCH -------USD 380.00 5 INCH x 2.1/4 INCH -------USD 280.00 All the above said prices are for Free Delivery Worldwide to any Country.
We are among the best Lanco Type threading die head manufacturers in India. Lanco Type Threading die head manufactured by us is passed through stringent heat treatment in our advanced imported treatment plant. This threading die head is available in an assortment of types with us such as Lanco type pipe threading die head, Lanco type bar threading die head, Lanco type bolt threading die head and Lanco type rebar threading die head, Lanco type rod threading die head, Lanco type pvc pipe threading die head and Lanco type bar threading die head. These threading die head are efficient enough to give high performance in longer use. We facilitate our clients by providing easy accessibility of these threading die head at most reasonable prices. G9-power HEAT Treated die head are of the revolving type for application to hand operated, semi accurate to hand operated, semi-automatic & automatic threading machines of rugged construction the Die heads provide accurate and trouble free operation over long production runs. Constructed of specially selected alloys steel, the G9-power Die Head are recommended for threading upto and including class 3 tolerances and are well known for their ability to cut coarse pitch threads in a single pass. They have wide range converge, permit rapid set up, gives trouble free operations.
Product Description The Lanco Type Threading Machine is use to cut the external threads on the bar with the help of Tangential chaser. Lanco Thread cutting Chaser is used as a cutter in a machine. Bar remains still, Die-head rotates. Different types of threads can be cut on the bar such as BSW, NPT, UNF, METRIC, UNC, ACME, BSF Threads etc. Such a company will offer you the amenity of customization, wherein the bar thread cutting machinery will be designed and fabricated as per your specifications. These can vary on aspects such as saddle movement, range of spindle speed, capacity , the number of units it can produce in an hour and the requirement of power to operate the machinery. As is the case with most bar threading machinery, this one too works with sub parts such as saddles, aprons and beds. These are all designed and fitted in such a manner that they provide hassle free operation and require minimal attention, post purchase. This not only ensures actual value for money, but also reduces the time spent on regular maintenance and servicing. Range of Lanco Type Threading Die-Head: 1/4 to 1 do/- 3/8 to 1.1/2 do/- 1/2 to 2.1/2 do/-
Product Description The cylinder neck ring mounts to a seamless high pressure cylinder to provide a means of attachment for the cylinder valve protection device, whether it be a cap, valve guard or other valve protective device. Due to the varying boss sizes on cylinders, our neck rings are custom made to fit your manufacturing needs. The most common sizes are maintained in stock at our Wheatland facility. The neck ring can also double as an identifying label on the flange of the neck ring by embossing your company name, logo and phone number if desired. KEY FEATURES: Zinc Plated High Quality Steel Rolled threads that provide better characteristics & higher strength Available with or without nibs, (typically there are 0, 3, 5 nibs.) OD - 90 mm Id hole - 40.5/44 mm customized Height - 40 mm to 43 available- customized Thread - w80�?11 TPI Material - 3.5 mm thickness MS Prime Cylinder neck ring manufacturer OPTIONS: Available in bore sizes from 0.900â?? and 2.56â??. Custom bores available upon request. Custom heights available per your requirement Other standard skirts sizes, (i.e. industrial short skirt 3-3/8â?? diameter, full skirt and no skirt) Custom Lettering Available (Most dies in stock.) No die charges on minimum order qty. Contact your ACC sales associate for more details.
Air tool accessories, angle cutter, angle wrenches, angular contact ball bearings, ball bearing,ball nose cutter,bearing analyzer, boiler gauge glass, carbide drills, carbide taps, carbide thread mills, carbide tools, chucking reamers, CNC thread milling machine, collet adapter, collet chucks, collet sleeves, construction machinery spare parts, custom hydraulic cylinders, cutting bit, cutting tool holder, cutting tool inserts, cylindrical cutters, die moulds, drill bits, drill collets, drilling machine, drilling tools, electronic cutter, end mill cutter, end milling machine, end mills, er collets. Expanding collets, face cutter, form cutters, gun drill, hand reamer, hand taps, hardware tools, hss cutting tools, hss drill bits, HSS end mill, hss milling cutters, hss reamer, hss tap,hss tap set, hss tool bits, hss twist drills, indexable inserts, industrial collets, industrial hand tools, insert ball bearing, jobber drills, keyway milling cutter, machine cutting tools, machine reamers.
Thread-chaser.
API 602 Gate Valve Main features * Bolted body-bonnet design for valves up to Class 800, 1500, 2500, 4500. Valves with welded bonnet also available on request * Screwed with a seal-welded body-bonnet design for valves of Class 1500,2500, 4500. * Bellows-sealed Gate and Globe valves available in Class 800 * Bolted body-bonnet joints provided with spiral-wound stainless steel gasket and graphite filler for maximum protection against leaks * Die-formed graphite inner packing rings and braided graphite end rings with Inconel wire reinforcement and corrosion inhibitor * T-head stem-disc connection of gate valve fully meets strength requirements of API 602 and API 598 * Rolled ACME thread on stem for smooth operation * Tapered shoulder on the stem for back seating * Self-aligning type gland assembly with stud-and-nut tightening * Integral hard-faced body seat for globe and check valves * Spring-loaded disc on check valves suitable for no horizontal applications too * Gate and globe valves can be offered with electrical actuators * Austenitic SS forging for body and bonnet of Cryogenic valves, resulting in excellent impact strength, minimal heat loss and resistance to corrosion * Valves can be offered to NACE MR-0175 and other special NACE requirements
SQK A182 FSS16 Stainless Steel Gate Valve Main features * Bolted body-bonnet design for valves up to Class 800, 1500, 2500, 4500. Valves with welded bonnet also available on request * Screwed with a seal-welded body-bonnet design for valves of Class 1500,2500, 4500. * Bellows-sealed Gate and Globe valves available in Class 800 * Bolted body-bonnet joints provided with spiral-wound stainless steel gasket and graphite filler for maximum protection against leaks * Die-formed graphite inner packing rings and braided graphite end rings with Inconel wire reinforcement and corrosion inhibitor * T-head stem-disc connection of gate valve fully meets strength requirements of API 602 and API 598 * Rolled ACME thread on stem for smooth operation * Tapered shoulder on the stem for back seating * Self-aligning type gland assembly with stud-and-nut tightening * Integral hard-faced body seat for globe and check valves * Spring-loaded disc on check valves suitable for no horizontal applications too * Gate and globe valves can be offered with electrical actuators * Austenitic SS forging for body and bonnet of Cryogenic valves, resulting in excellent impact strength, minimal heat loss and resistance to corrosion * Valves can be offered to NACE MR-0175 and other special NACE requirements
A182 F316L Stainless Steel Gate Valve Main features * Bolted body-bonnet design for valves up to Class 800, 1500, 2500, 4500. Valves with welded bonnet also available on request * Screwed with a seal-welded body-bonnet design for valves of Class 1500,2500, 4500. * Bellows-sealed Gate and Globe valves available in Class 800 * Bolted body-bonnet joints provided with spiral-wound stainless steel gasket and graphite filler for maximum protection against leaks * Die-formed graphite inner packing rings and braided graphite end rings with Inconel wire reinforcement and corrosion inhibitor * T-head stem-disc connection of gate valve fully meets strength requirements of API 602 and API 598 * Rolled ACME thread on stem for smooth operation * Tapered shoulder on the stem for back seating * Self-aligning type gland assembly with stud-and-nut tightening * Integral hard-faced body seat for globe and check valves * Spring-loaded disc on check valves suitable for no horizontal applications too * Gate and globe valves can be offered with electrical actuators * Austenitic SS forging for body and bonnet of Cryogenic valves, resulting in excellent impact strength, minimal heat loss and resistance to corrosion * Valves can be offered to NACE MR-0175 and other special NACE requirements
Screwed End Gate Valve Main features * Bolted body-bonnet design for valves up to Class 800, 1500, 2500, 4500. Valves with welded bonnet also available on request * Screwed with a seal-welded body-bonnet design for valves of Class 1500,2500, 4500. * Bellows-sealed Gate and Globe valves available in Class 800 * Bolted body-bonnet joints provided with spiral-wound stainless steel gasket and graphite filler for maximum protection against leaks * Die-formed graphite inner packing rings and braided graphite end rings with Inconel wire reinforcement and corrosion inhibitor * T-head stem-disc connection of gate valve fully meets strength requirements of API 602 and API 598 * Rolled ACME thread on stem for smooth operation * Tapered shoulder on the stem for back seating * Self-aligning type gland assembly with stud-and-nut tightening * Integral hard-faced body seat for globe and check valves * Spring-loaded disc on check valves suitable for no horizontal applications too * Gate and globe valves can be offered with electrical actuators * Austenitic SS forging for body and bonnet of Cryogenic valves, resulting in excellent impact strength, minimal heat loss and resistance to corrosion * Valves can be offered to NACE MR-0175 and other special NACE requirements
Socket Weld Gate Valve Main features * Bolted body-bonnet design for valves up to Class 800, 1500, 2500, 4500. Valves with welded bonnet also available on request * Screwed with a seal-welded body-bonnet design for valves of Class 1500,2500, 4500. * Bellows-sealed Gate and Globe valves available in Class 800 * Bolted body-bonnet joints provided with spiral-wound stainless steel gasket and graphite filler for maximum protection against leaks * Die-formed graphite inner packing rings and braided graphite end rings with Inconel wire reinforcement and corrosion inhibitor * T-head stem-disc connection of gate valve fully meets strength requirements of API 602 and API 598 * Rolled ACME thread on stem for smooth operation * Tapered shoulder on the stem for back seating * Self-aligning type gland assembly with stud-and-nut tightening * Integral hard-faced body seat for globe and check valves * Spring-loaded disc on check valves suitable for no horizontal applications too * Gate and globe valves can be offered with electrical actuators * Austenitic SS forging for body and bonnet of Cryogenic valves, resulting in excellent impact strength, minimal heat loss and resistance to corrosion * Valves can be offered to NACE MR-0175 and other special NACE requirements
SQK A182 F304L Stainless Steel Gate Valve Main features * Bolted body-bonnet design for valves up to Class 800, 1500, 2500, 4500. Valves with welded bonnet also available on request â * Screwed with a seal-welded body-bonnet design for valves of Class 1500,2500, 4500. * Bellows-sealed Gate and Globe valves available in Class 800 * Bolted body-bonnet joints provided with spiral-wound stainless steel gasket and graphite filler for maximum protection against leaks * Die-formed graphite inner packing rings and braided graphite end rings with Inconel wire reinforcement and corrosion inhibitor * T-head stem-disc connection of gate valve fully meets strength requirements of API 602 and API 598 * Rolled ACME thread on stem for smooth operation * Tapered shoulder on the stem for back seating * Self-aligning type gland assembly with stud-and-nut tightening * Integral hard-faced body seat for globe and check valves * Spring-loaded disc on check valves suitable for no horizontal applications too * Gate and globe valves can be offered with electrical actuators * Austenitic SS forging for body and bonnet of Cryogenic valves, resulting in excellent impact strength, minimal heat loss and resistance to corrosion * Valves can be offered to NACE MR-0175 and other special NACE requirements
A182 F321 Stainless Steel Gate Valve Main features * Bolted body-bonnet design for valves up to Class 800, 1500, 2500, 4500. Valves with welded bonnet also available on request * Screwed with a seal-welded body-bonnet design for valves of Class 1500,2500, 4500. * Bellows-sealed Gate and Globe valves available in Class 800 * Bolted body-bonnet joints provided with spiral-wound stainless steel gasket and graphite filler for maximum protection against leaks * Die-formed graphite inner packing rings and braided graphite end rings with Inconel wire reinforcement and corrosion inhibitor * T-head stem-disc connection of gate valve fully meets strength requirements of API 602 and API 598 * Rolled ACME thread on stem for smooth operation * Tapered shoulder on the stem for back seating * Self-aligning type gland assembly with stud-and-nut tightening * Integral hard-faced body seat for globe and check valves * Spring-loaded disc on check valves suitable for no horizontal applications too * Gate and globe valves can be offered with electrical actuators * Austenitic SS forging for body and bonnet of Cryogenic valves, resulting in excellent impact strength, minimal heat loss and resistance to corrosion * Valves can be offered to NACE MR-0175 and other special NACE requirements
A182 F321H Stainless Steel Gate Valve Main features * Bolted body-bonnet design for valves up to Class 800, 1500, 2500, 4500. Valves with welded bonnet also available on request * Screwed with a seal-welded body-bonnet design for valves of Class 1500,2500, 4500. * Bellows-sealed Gate and Globe valves available in Class 800 * Bolted body-bonnet joints provided with spiral-wound stainless steel gasket and graphite filler for maximum protection against leaks * Die-formed graphite inner packing rings and braided graphite end rings with Inconel wire reinforcement and corrosion inhibitor * T-head stem-disc connection of gate valve fully meets strength requirements of API 602 and API 598 * Rolled ACME thread on stem for smooth operation * Tapered shoulder on the stem for back seating * Self-aligning type gland assembly with stud-and-nut tightening * Integral hard-faced body seat for globe and check valves * Spring-loaded disc on check valves suitable for no horizontal applications too * Gate and globe valves can be offered with electrical actuators * Austenitic SS forging for body and bonnet of Cryogenic valves, resulting in excellent impact strength, minimal heat loss and resistance to corrosion * Valves can be offered to NACE MR-0175 and other special NACE requirements
A182 F51 Duplex Stainless Steel Gate Valve Main features * Bolted body-bonnet design for valves up to Class 800, 1500, 2500, 4500. Valves with welded bonnet also available on request * Screwed with a seal-welded body-bonnet design for valves of Class 1500,2500, 4500. * Bellows-sealed Gate and Globe valves available in Class 800 * Bolted body-bonnet joints provided with spiral-wound stainless steel gasket and graphite filler for maximum protection against leaks * Die-formed graphite inner packing rings and braided graphite end rings with Inconel wire reinforcement and corrosion inhibitor * T-head stem-disc connection of gate valve fully meets strength requirements of API 602 and API 598 * Rolled ACME thread on stem for smooth operation * Tapered shoulder on the stem for back seating * Self-aligning type gland assembly with stud-and-nut tightening * Integral hard-faced body seat for globe and check valves * Spring-loaded disc on check valves suitable for no horizontal applications too * Gate and globe valves can be offered with electrical actuators * Austenitic SS forging for body and bonnet of Cryogenic valves, resulting in excellent impact strength, minimal heat loss and resistance to corrosion * Valves can be offered to NACE MR-0175 and other special NACE requirements
* The API 600 Gate Valves is exceptionally sturdy, rugged, and durable, with a reputation for quality, integrity, and long service. * They are designed for tight sealing and ease of operation. The valves are available flanged & butt-weld ends in pressure rating from ASME Class 150 to Class 2500, and in a variety of materials of construction. * Gate Valves are of flexible wedge design, outside screw and yoke, and bolted-bonnet construction. The valves conform to API 600. Main features * Bolted body-bonnet design,seal welded & Valves with pressure seal bonnet * Bellows-sealed Gate and Globe valves available * Bolted body-bonnet joints provided with spiral-wound stainless steel gasket and graphite filler for maximum protection against leaks * Die-formed graphite inner packing rings and braided graphite end rings with Inconel wire reinforcement and corrosion inhibitor * T-head stem-disc connection of gate valve fully meets strength requirements of API 602 and API 598 * Rolled ACME thread on stem for smooth operation Tapered shoulder on the stem for back seating * Self-aligning type gland assembly with stud-and-nut tightening * Integral hard-faced body seat for globe and check valves * Spring-loaded disc on check valves suitable for no horizontal applications too * Gate and globe valves can be offered with electrical actuators * Austenitic SS forging for body and bonnet of Cryogenic valves, resulting in excellent impact strength, minimal heat loss and resistance to corrosion * Valves can be offered to NACE MR-0175 and other special NACE requirements
* The API BS 1868 series of Swing Check Valves is exceptionally sturdy, rugged and durable, with a reputation for quality, integrity, and long service. * They are designed for tight sealing and ease of operation. The valves are available flanged & butt-weld ends in pressure rating from ASME Class 150 to Class 2500, and in a variety of materials of construction. * Check Valves are of swing-type and bolted-cover construction. They conform to BS 1868 and also meet the general requirements of API 600, including shell wall thickness. Main features * Bolted body-cover design, seal welded & Valves with pressure seal cover * Bolted body-cover joints provided with spiral-wound stainless steel gasket and graphite filler for maximum protection against leaks * Die-formed graphite inner packing rings and braided graphite end rings with Inconel wire reinforcement and corrosion inhibitor * T-head stem-disc connection of gate valve fully meets strength requirements of API 602 and API 598 * Rolled ACME thread on the stem for smooth operation * Tapered shoulder on the stem for back seating * Self-aligning type gland assembly with stud-and-nut tightening * Integral hard-faced body seat for globe and check valves * Spring-loaded disc on check valves suitable for no horizontal applications too * Gate and globe valves can be offered with electrical actuators * Austenitic SS forging for body and bonnet of Cryogenic valves, resulting in excellent impact strength, minimal heat loss, and resistance to corrosion * Valves can be offered to NACE MR-0175 and other special NACE requirements
The BS 1873 Globe Valves is exceptionally sturdy, rugged and durable, with a reputation for quality, integrity and long service. They are designed for tight sealing and ease of operation. The valves are available flanged & butt-weld ends in pressure rating from ASME Class 150 to Class 2500, and in a variety of materials of construction. Globe Valves feature a ball-type disc, outside screw-and-yoke and bolted-bonnet construction. They conform to BS 1873 and also meet the general requirements of API 600, including shell wall thickness and stuffing box dimensions. Main features * Bolted body-bonnet design,seal welded & Valves with pressure seal bonnet * Bellows-sealed Globe valves available * Bolted body-bonnet joints provided with spiral-wound stainless steel gasket and graphite filler for maximum protection against leaks * Die-formed graphite inner packing rings and braided graphite end rings with Inconel wire reinforcement and corrosion inhibitor * Rolled ACME thread on stem for smooth operation * Tapered shoulder on the stem for back seating * Self-aligning type gland assembly with stud-and-nut tightening * Integral hard-faced body seat for globe and check valves * Spring-loaded disc on check valves suitable for no horizontal applications too * Gate and globe valves can be offered with electrical actuators * Austenitic SS forging for body and bonnet of Cryogenic valves, resulting in excellent impact strength, minimal heat loss and resistance to corrosion * Valves can be offered to NACE MR-0175 and other special NACE requirements
* The Bolted Bonnet Gate Valve is exceptionally sturdy, rugged, and durable, with a reputation for quality, integrity, and long service. * They are designed for tight sealing and ease of operation. The valves are available flanged & butt-weld ends in pressure rating from ASME Class 150 to Class 2500, and in a variety of materials of construction. * Gate Valves are of flexible wedge design, outside screw and yoke, and bolted-bonnet construction. The valves conform to API 600. Main features * Bolted body-bonnet design,seal welded & Valves with pressure seal bonnet * Bellows-sealed Gate and Globe valves available * Bolted body-bonnet joints provided with spiral-wound stainless steel gasket and graphite filler for maximum protection against leaks * Die-formed graphite inner packing rings and braided graphite end rings with Inconel wire reinforcement and corrosion inhibitor * T-head stem-disc connection of gate valve fully meets strength requirements of API 602 and API 598 * Rolled ACME thread on stem for smooth operation * Tapered shoulder on the stem for back seating * Self-aligning type gland assembly with stud-and-nut tightening * Integral hard-faced body seat for globe and check valves * Spring-loaded disc on check valves suitable for no horizontal applications too * Gate and globe valves can be offered with electrical actuators * Austenitic SS forging for body and bonnet of Cryogenic valves, resulting in excellent impact strength, minimal heat loss and resistance to corrosion * Valves can be offered to NACE MR-0175 and other special NACE requirements
