Socket Weld Gate Valve
Main features
* Bolted body-bonnet design for valves up to Class 800, 1500, 2500, 4500. Valves with welded bonnet also available on request
* Screwed with a seal-welded body-bonnet design for valves of Class 1500,2500, 4500.
* Bellows-sealed Gate and Globe valves available in Class 800
* Bolted body-bonnet joints provided with spiral-wound stainless steel gasket and graphite filler for maximum protection against leaks
* Die-formed graphite inner packing rings and braided graphite end rings with Inconel wire reinforcement and corrosion inhibitor
* T-head stem-disc connection of gate valve fully meets strength requirements of API 602 and API 598
* Rolled ACME thread on stem for smooth operation
* Tapered shoulder on the stem for back seating
* Self-aligning type gland assembly with stud-and-nut tightening
* Integral hard-faced body seat for globe and check valves
* Spring-loaded disc on check valves suitable for no horizontal applications too
* Gate and globe valves can be offered with electrical actuators
* Austenitic SS forging for body and bonnet of Cryogenic valves, resulting in excellent impact strength, minimal heat loss and resistance to corrosion
* Valves can be offered to NACE MR-0175 and other special NACE requirements
Product keyword: gate valves, iron gate valves, bronze gate valves, valves We can supply a wide range of gate valves: Small forged gate valves Extended body bellows gate valves Bronze gate valves Iron gate valves Cast steel gate valves Bellows seal gate valves Cryogenic gate valves Flanged gate valves Socket weld/threaded gate valves Metal-seated knife gate valves Resilient-seated knife gate valves Bolted bonnet flexible wedge gate valves Cast steel gate valves Cast iron gate valves Bronze gate valves Brass gate valves We also can supply valves from many international brands as follows: Velan gate valves, milwaukee gate valves, nibco gate valves, mueller gate valves, crane gate valves, tyco gate valves, Cameron gate valves, stockham gate valves, wkm gate valves, warren gate valves, lunkenheimer gate valves, vir gate valves, Burkert valves, fisher valves, burkert valves, danfoss valves, asco solenoid valve, jamesbury valves, parker valves, fisher control valves , tognella valves
MATIREAL - CAST IRON / CAST STEEL / STAINLESS STEEL 304/316/316L / WCB BALL - STAINLESS STEEL 304 / 316//316L STEAM - STAINLESS STEEL 304/316 GLAND NUT - 304 / 316 STAINLESS STEEL SEAT - PTFE/CTFE/GTFE SIZE - 1/4 INCH TO 4 INCH
MATIREAL - CAST IRON / CAST STEEL / STAINLESS STEEL 304/316/316L / WCB BALL - STAINLESS STEEL 304 / 316//316L STEAM - STAINLESS STEEL 304/316 GLAND NUT - 304 / 316 STAINLESS STEEL STUD NUT - STAINLESS STEEL 304 SEAT - PTFE/CTFE/GTFE
MATERIAL - CAST IRON / CAST STEEL / WCB / STAINLESS STEEL 3O4/316/316L BALL - STAINLESS STEEL 304 / 316 STEAM - STAINLESS STEEL 304/316/ GLAND NUT - STAINLESS STEEL 304/316 LEVER - STAINLESS STEEL 304 SEAT - PTFE / CTFE / GTFE STUD NUT - STAINLEES STEEL 304
Type: SW,FNPT,BW,Bore: NPS½~NPS2,DN15~DN100 Rating: Class150~Class2500 Material: Forged steel Operation: Manual,Gear Operated,Electric Operated,Pneumatic Operated Applicable: Oil,Chemical,Natural Gas,Petrochemical,Coal Chemical and so on Socket Welding Forged Gate Valve product description Socket Welding Forged Gate valves are suitable for using on various kinds of pipeline from Class150 To Class2500, DN15 To DN100 to cut off or connect the flowing of medium. By using different material, the Socket Welding Forged Gate Valve could be suitable for medium such as water, steam, oil, nitric acid, acetic acid, oxidizing substance, carbamide and etc. Socket welding connection is used for not very high pressure with small nominal diameter, while butt welding is generally for high pressure.Butt welding usually should be done 100% NDT to ensure there is no leaking. For high pressure or some severe working condition, butt welding connection should be adopted for its better weld strength and force bearing. Outside screw and yoke, rising stem, bolted bonnet Body/bonnet: ASTM A105 Trim: 13%Cr F-NPT ends as per ASME B1.20.1 Socket welded ends as per ASME B16.11 Face to face dimension as per manufacturer's standard Painting: body/hand wheel phosphorization No sign of producer on body/bonnet Including material certificate acc. EN 10204-3.1B for body and bonnet Including inspection certificate EN 10204-3.1B for shell test and tightness test
Ball Valves Screwed / Socket Weld / Butt-weld / Flanged Ends : Ball valves are designed and manufactured to provide maximum service life and dependability. Three Piece and Two Piece design Ball Valves ensure efficiency, reliability and economy. Pneumatic Operated Ball Valves and Electrical Actuated Ball Valves are maintenance friendly and suitable for on-line maintenance . Butterfly Valves High Performance Butterfly Valve 150LB/300LB/600LB ,wafer type with integrally moulded elastomeric body sleeve are designed for longer life and trouble free performance. Gate Valves ATSIPL distributes a full line of Gate Valves, including Wedge Gate Valves, Knife Gate Valves, Lined Gate Valves, Resilient Seated Gate Valves and more. Gate Valves are available from 1/2â?³ through 24â?³ and larger in various material options.
* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements. * The valves are of floating-ball design where the ball moves towards the downstream seat, under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D * Wide portfolio of Side-entry and Top-entry designs * Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH * Firesafe design - to API 607 and API 6FA * CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU, Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required * Double block and bleed (DBB) feature - Valves are designed and tested for automatic * cavity relief * Anti-blowout stem design * Coil springs used for consistent seat loading and lower operating torque * Lip seals provided for low temperature services * Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary) * Wide portfolio of Side-entry and Top-entry designs * Options: Buried service, Cryogenic * Offered with Electric, Pneumatic and Hydraulic Actuators * In-house Tests Capabilities * Fire-safe to ISO 10497 and API 607 * Mirror-finished solid stainless ball * Fine-grained PTFE seats * Cavity Pressure Relief mechanism * Blowout-proof stem * High integrity stem sealing â?? Belleville springs compensate for wear and thermal expansions * Size 2" to 56" (50 mm to 1400 mm) * ASME Class Class 150 to 2500 * Design Standard API 6D * Size ¼" to 8" (8 mm to 200 mm) * ASME Class Class 150 to 2500 * Design Standard ISO 17292, API 608, API 6D * Antistatic feature * Actuator-mounting flange conforms to ISO 5211 * Single, two and three piece constructions * Full-bore and regular-bore designs * Soft and metal-seated * Offered in carbon steel, stainless steel and duplex stainless steels * Screwed, socket-weld and flanged ends * ASME classes up to 2500 * Variety of actuation option