Product Description Si-811 glass coating agent, is featured with advantageous performances of enhancing finish glossiness, water repellency and anti-fouling, forming a genuine protective film to car paint. Combined practice with X-03 protectant after practice, can protect the coating film in its hardening stage, and also can effectively prevent raindrop imprint, enabling perfect glass coating effectiveness. Product Feature Si-811 glass coating agent, is featured with advantageous performances of enhancing finish glossiness, water repellency and anti-fouling, forming a genuine protective film to car paint. Combined practice with X-03 protectant after practice, can protect the coating film in its hardening stage, and also can effectively prevent raindrop imprint, enabling perfect glass coating effectiveness. Product Specification / Models 1. 1 Si-811 glass coating agent (30ml); 2. 1 X-03 protectant (30ml); 3. 1 Glass coating sponge; 4. 1 Manual Application Pre-practice treatment Finish treatment before vehicle glass coating is dependent on finish conditions, and it is critical to the practice, for inferior treatment may influence the adhesiveness and basic performance of glass coating film, thus please determine whether it needs iron powder removal, grinding and polishing, and air gun blow-off procedures on basis of the finish conditions, but do note that degreasing is necessary Other Information 1. This product is fast try, please avoid practice under burning sun, otherwise wiping would be impeded; 2. Avoid practice in temperature environment under 10; 3. Please carry out practice under complete cool-off state of the vehicle body, since vehicle body heat may expedite product hardening rate leading to wiping obstruction; 4. Please completely clear fouling attached on vehicle body and carry out degreasing before practice; 5. Please read practice manual in details and follow practice procedures therein
Product Description Combined different series of products can protect the coating film in its hardening stage, and also can effectively prevent raindrop imprint, enabling perfect glass coating effectiveness. Product Feature Si-701 and Si-901 double film glass coating overlay, protects vehicle finish with excellent and extended durability, consolidating top-level 3D glass coating film, which is featured with superior performances of improving finish glossiness, water-repellency and anti-fouling properties. Combined practice with X-03 protectant after practice, can protect the coating film in its hardening stage, and also can effectively prevent raindrop imprint, enabling perfect glass coating effectiveness. Product Specification / Models 1. 1 Si-701 glass coating agent (30ml); 2. 1 Si-901 glass coating agent (30ml); 3. 1 X-03 protectant (30ml); 4. 2 Glass coating sponges; 5. 1 Manual Application Finish treatment before vehicle glass coating is dependent on finish conditions, and it is critical to the practice, for inferior treatment may influence the adhesiveness and basic performance of glass coating film, thus please determine whether it needs iron powder removal, grinding and polishing, and air gun blow-off procedures on basis of the finish conditions, but do note that degreasing is necessary Other Information After completion of whole vehicle Si-901 glass coating practice, postpone for above 2 hours to carry out X-03 protectant practice; 1. Jiggle before practice, spray X-03 protectant on the finish, 4 to 5 times for half the hood.; 2. Use a dry towel to gently wipe in alternate lateral and vertical linearly, then use another dry towel to wipe with polishing brightness to complete; 3. It is recommended a practice of X-03 protectant for every 3-6 months of the vehicle to better protect the glass coating film. Notice: Do not use excessive quantity leading to nonuniform practice
Product Description Si-811 glass coating agent, is featured with advantageous performances of enhancing finish glossiness, water repellency and anti-fouling, forming a genuine protective film to car paint. Combined practice with X-03 protectant after practice, can protect the coating film in its hardening stage, and also can effectively prevent raindrop imprint, enabling perfect glass coating effectiveness. Product Feature Si-811 glass coating agent, is featured with advantageous performances of enhancing finish glossiness, water repellency and anti-fouling, forming a genuine protective film to car paint. Combined practice with X-03 protectant after practice, can protect the coating film in its hardening stage, and also can effectively prevent raindrop imprint, enabling perfect glass coating effectiveness. Product Specification / Models i-811 Kisho Glass Coating [Ingredients]SiO2 [Specifications]1L,2L,4L,17L Application Si-811 glass coating agent, is featured with advantageous performances of enhancing finish glossiness, water repellency and anti-fouling, forming a genuine protective film to car paint. Combined practice with X-03 protectant after practice, can protect the coating film in its hardening stage, and also can effectively prevent raindrop imprint, enabling perfect glass coating effectiveness. Other Information Finish treatment before vehicle glass coating is dependent on finish conditions, and it is critical to the practice, for inferior treatment may influence the adhesiveness and basic performance of glass coating film, thus please determine whether it needs iron powder removal, grinding and polishing, and air gun blow-off procedures on basis of the finish conditions, but do note that degreasing is necessary.
JHG offer differnt sizes of tempered glass, annealed glass to meet the inquiry for greenhouse ,hobby garden , Glass thickness is 3mm/3.2mm/4mm/5mm Glass items : clear float glass ,acid etched glass ,diffused glass high haze glass ,AR coated glass Max LT >99% Max haze>50%
JHG shower door is produced with several types of glass. The current modern design trend has given us more choice on glass types, colors, and patterns. Shower door glass is made with tempered glass,laminated glass , with excellent drilling ,cutouts ,and polished edge The main products series : ** Tempered clear glass clear glass is the most ordinarily used option for shower enclosures, low cost and easy clean **Tempered pattern glass The pattern bring distinctive decorative on the glass surface Let the glass in high opacity ,guarantee a higher level of privacy One side of the glass is patterned ,and the other side is flat for easier cleaning **tempered acid etched glass/ gradient change glass Processed on base of acid etched glass The opaque and satin surface bring artistic effect Gradient change is an interesting new decorative products ,and rapidly accepted by modern shower door designs. Easy cleaning **tempered low iron glass High light transparent with colorless appearance The glass blue edge make the whole shower enclosure in high grade **tempered glass with anti-limescale coating For preserve the functional and aesthetic properties of shower glass ,we offer coated glass for avoid damage caused by water sediments
JHG shower door is produced with several types of glass. The current modern design trend has given us more choice on glass types, colors, and patterns. Shower door glass is made with tempered glass , with excellent drilling ,cutouts ,and polished edge The main products series : **Tempered clear glass clear glass is the most ordinarily used option for shower enclosures, low cost and easy clean **Tempered rain/nashiji pattern glass The pattern bring distinctive decorative on the glass surface Let the glass in high opacity ,guarantee a higher level of privacy One side of the glass is patterned ,and the other side is flat for easier cleaning **tempered acid etched glass/ gradient change glass Processed on base of acid etched glass The opaque and satin surface bring artistic effect Gradient change is an interesting new decorative products ,and rapidly accepted by modern shower door designs. Easy cleaning **tempered low iron glass High light transparent with colorless appearance The glass blue edge make the whole shower enclosure in high grade **tempered glass with anti-limescale coating For preserve the functional and aesthetic properties of shower glass ,we offer coated glass for avoid damage caused by water sediments
we may offer 3mm/3.2mm/4mm/5mm/6mm tempered solar glass , glass mainly used for PV module ,solar collector ,greenhouse , solar transmission >91.5% AR coating max solar transmission>99%
SOLAR GLASS JHG solar glass including texture glass and flat glass ,it is the nice performance low iron glass with high solar transmittance, and low reflection . After tempered, it will be the ideal choice for photovoltaics, solar thermal collector ,and greenhouse . Size Maximum Size:1665*2200mm Minimum Size: 300*300mm Specifiction Main thickness 2-5mm Dimension tolerance �?�±1.0mm Thickness tolerance �?�±0.2mm Diagonal tolerance 0.2% Overall bow
JHG tinted glass is produced by metal oxides to the float glass. The colour may be transferred in the series of blue, green, grey, bronze flexibly. The performance of visible light, privacy and solar heat transmission will be changed arrording the colour change. Different tinted glass offers varied application possibility-from interior partitions, to home appliance, to furniture, to facades and auto field. Reflective glass is float glass with a metallic coating that cuts off solar heat.The coating film may provide mirror effect, preventing visibility from outside and preserving privacy. JHG mainly offer 2 kinds of reflective glass. Hard reflective glass (on line) includes blue, green, grey, bronze, pink, silver colour, Soft reflective glass (off line) includes golden, silver, purple colur. Specification Sizes:1220*1830/1830*2440/1650*2140/2140*3300/2140*3660/2440*3660/2250*3660/3300*4500/5100/6000mm Thickness: 3-12mm Quality standard GB11614-2009/SGCC/EN 572
Product Description Wiping-free fast-dry glass coating product, can increase wheel's brightness, extend durability, enhance water repellency, greatly enhance anti-fouling property and self-cleanliness, and reduce fouling attachment. Product Feature .Wiping-free fast-dry glass coating product, can increase wheel's brightness, extend durability, enhance water repellency, greatly enhance anti-fouling property and self-cleanliness, and reduce fouling attachment Product Specification / Models 1. 5 Si-02 wheel coating agents (10 ml); 2. 1 Manual. Application Si-02 wheel glass coating practice method 1. Completely clear fouling attached on the wheel hub, and use a air gun to blow off moisture until it is completely dry; 2. Drip Si-02 wheel glass coating agent on coating cloth, and smear the wheel uniformly, notice not to smear repeatedly (repeated smearing leads to visible traces); 3. Keep still standing above 5 hours after smearing, or use a hot lamp or hot blast to expedite hardening rate of the glass coating film Other Information Note 1. Avoid engaging water or rinsing the vehicle with 24 hours after practice. 2. This product is a mild irritant to skin, please wear protective gloves if allergic with its practice.
Product of SC Johnson Indonesia All Kit Car Care products: Kit Black Magic Tire Gel, Kit Black Magic Tire Foam, Kit Wash & Wax, Kit Wash & Glow, Kit Detailer, Kit Paste Wax Original, Kit Paste Wax Restorative, Kit Rubbing Compound, Kit Paste Wax New Car, Kit Metalic Car Wax, Kit Gold Series, Kit Protectant, Kit Leather Care, Kit Multi Purpose Cleaner, Kit Wiper Fluid, Kit Auto Glass Cleaner, Kit GP-9, Kit Glass Polish, Kit Metal Polish, Kit Motor Paste Wax.
Commodity: Synthetic Cryolite Formula: Na3AlF6 M.W.: 209.95 Properties: The product is a white crystalline powder or a sandy-size granularity, and a pinkish crystalline powder or a sandy-size granularity as well. Sp.gr.2.953.01g/cm3, melting point about 1000centigrade, specific heat 1.056j/gcentigradeat 18100centigrade. Its slightly soluble in water, but insoluble in anhydrous hydrogen fluoride. The content of its crystal water will be decreased while the increasing of the molecular ratio, therefore its loss on ignition will be also decreased while the increasing of the molecular ratio. After the paste of synthetic cryolite with different molecular ratio dehydrates, the loss on ignition at 800centigrade will appear 10.34%, 6.22% and 2.56% when the molecular ratio reaches 1.74, 2.14 and 2.63 reactively. Specifications: Appearance white powder F 52% min Al 12% min Na 33% max SiO2 0.36% max Fe2O3 0.08% max CaO 0.5% max P2O5 0.03% max SO4 0.6% max H2O 0.4% max Loss on ignition 2 % max Uses: Its mainly used as a flux in the aluminum smelting by fused-salt electrolysis; also an opalizer in the manufacture of enamel; an opacifier and auxiliary solvent of glass and enamel; an insecticide of crops; a flux in aluminum alloy casting; and in the production of ferrous alloy and effervescing steel; as well as a wear-resistant filler for resin and rubber-boned abrasive wheels. Packing & Storage: In plastic coating woven bags with plastic film inside, 25kg,40kgs, 50kgs or 1000kgs net each, or as the requirement of clients.Stored: in a cool , ventilated, dry place.
Kaolin: Kaolin uses are multiple and diverse. Kaolin are used as functional filler, extender, ceramic raw material and pigment because of its whiteness and fine particle size. Kaolin also hold importance as raw material in refractory applications, concrete, rubber and fiber glass manufacturing. We, as a Kaolin Exporter welcome any size of international orders from Middle East and other countries. Applications: Paper: Kaolin used as a coating pigment and as a filler to replace fiber. It possesses desirable optical properties. Concrete: Kaolin helps to improve strength and durability of concrete. When added to concrete mix, reacts with free lime released during cement hydration to produce additional cementitious material, resulting in an improved high performance concrete. Plastics : Kaolin is widely used as filler in the plastics industry because of its inert chemical nature and its unique size, shape and structure. Agriculture : It is used as a carrier and diluent in fertilizers, pesticides and related products. It is suitable as carrier because it aides the retention of the formulations on the plant. Rubber : It is commonly used as functional filler in rubber applications. While Kaolin improves overall performance for Rubber in general, different types of white pigment play specific roles in rubber application. Paint : Kaolin used as an extender in paints. It reduces the amount of expensive pigment such as Titanium Dioxide. It assists with desirable rheological properties that help maintain proper dispersion and provide bulk to the product. Ceramic : Kaolin improves whiteness and brightness of ceramic body. Good plasticity, good shrinkage, low water absorption and casting rate are also very important properties of kaolin.
Type: Floor Boughpot, Flower Kettle/Sprinkler, Flower Tub, POTS, Pergola, Propagator Kits, Small Fence, VASE, Flower Basket, PLANTER Usage Condition: FLOOR Style: Classic Used With: Artificial Flower Place of Origin: Ho Chi Minh City, Vietnam Material: Natural Bamboo Finishing: Not Coated Usage: Home Garden Decoration
Two component, acrylic aliphatic polyurethane coating. Offers excellent gloss and colour retention. It is used for subtracts as steel, aluminum, glass-fiber, plywood etc.
Product Description The Si-901 glass coating agent is featured with superior performances of improving finish glossiness, water-repellency and anti-fouling properties Product Feature The Si-901 glass coating agent is featured with superior performances of improving finish glossiness, water-repellency and anti-fouling propertiesrecommended to combine with Si-901 practice to achieve premium coating overlay, which consolidate top-level 3D glass coating film whilst protecting vehicle finish with excellent and extended durability. Combined practice with X-03 protectant after practice, can protect the coating film in its hardening stage, and also can effectively prevent raindrop imprint, enabling perfect glass coating effectiveness. Product Specification / Models KISHO Si-901 [Specifications]1L,2L,4L,17L [Ingredients]SiO2 [Specifications]1L,2L,4L,17L [Dosage]One liter liquid construction 34 cars, each car was 30ml Application Si-811 glass coating agent, is featured with advantageous performances of enhancing finish glossiness, water repellency and anti-fouling, forming a genuine protective film to car paint. Combined practice with X-03 protectant after practice, can protect the coating film in its hardening stage, and also can effectively prevent raindrop imprint, enabling perfect glass coating effectiveness. Other Information Finish treatment before vehicle glass coating is dependent on finish conditions, and it is critical to the practice, for inferior treatment may influence the adhesiveness and basic performance of glass coating film, thus please determine whether it needs iron powder removal, grinding and polishing, and air gun blow-off procedures on basis of the finish conditions, but do note that degreasing is necessary.
Bitumen Primer * Bitumen Primer is Bituminous air curing ready mixed Acid & Alkali resistant special primer. Application * Concrete surface must be clean, dry and rough. No primer should be applied over smooth and wet surface. * After cleaning the concrete surface, one coat of Bitumen Primer should be applied with brush and allow to dry thoroughly. * The drying time will depend upon the temperature. * 24 Month at the temperature 30C (+2OC) Packing * Bitumen Primer: 25 Liter Drum Note * Bitumen Primer contains volatile and slightly toxic solvent. Keep away from spark and open flames at working area. * Bitumen premier it is manufactured using bitumen solution which is used for sealing of prime porous and non-porous surface, and also to protect residential and commercial building. * Bitumen Primer is used to protect substrate against corrosive attack, is suggested to apply anti-corrosive primer.It is best for protection against sub-striate against atmospheric corrosion and chemical corrosion. It is a mixed substance made up of organic liquids that are highly sticky, water proof, viscous,acid proof as with all surface coating, good Bitumen Premier is used for long life of the system. it is applied by brush or roller and allowed to dry before any water proofing treatment so to avoid solvent it is used in defects such as cracks, broken mortar joints, etc. are to be repaired prior to Bitumen primer application. Product Details: Grade Standard Technical Grade Physical State - Liquid Usage - Industrial Color - Black Characteristics: Appearance/Color - Pasty liquid/ black Chemical Base - Bituminous rubber emulsion. Density - 1.0 kg/l Curing Speed/ Rate - 3 - 4 hours Tack free after - 5 - 10 hours Cured after - 2 - 4 days (Dependent on ambient Solid Content by - temperature, substrate temperature, Weight - relative Water Content by weight - humidity and thickness of the coating) Bitumen Content - 41% by weight - Thixotropic (The viscosity can be adjusted by - Viscosity adding up to max. 5% of clean water. - Stir well prior use) - For light protection: 1.0 mm min. Coating - For greater protection: ~ 1.5 - 2.0 mm Thickness applied - in two coats. Water Penetration - 48 h, 1 bar: 78.5 cm2: 0 ml under Hydrostatic - 96 h, 4 bar: 78.5 cm2: 33 ml Pressure - Water vapor 6 x 10-7 mg / hmPa Permeability Service - -30 C to 200 C Temperature - Adhesion Concrete - Very good, Timber: Very good, Metal: Moderate Glass: Poor
JH Glass shower door is produced with several types of raw glass. The current modern design trend has given us more choice on glass types, colors, and patterns. Shower door glass is made by tempered glass, with excellent drilling, cutouts, polished edge. Products series : Tempered clear glass clear glass is the most ordinarily used option for shower enclosures, low cost and easy clean Tempered raindown/nashiji pattern glass The pattern bring distinctive decorative on glass surface Let the glass in high opacity ,guarantee a higher level of privacy One side of the glass is patterned ,and the other side is flat for easier cleaning Tempered acid etched glass/ gradient change glass Processed on base of acid etched glass The opaque and satin surface bring artistic effect Gradient change is an interesting new decorative products ,and rapidly accepted by modern shower door designs. Tempered low iron glass High light transparent with colorless appearance The glass blue edge makes the whole shower enclosure in high grade Tempered glass with anti-limescale coating For preserve the functional and aesthetic properties of shower glass , JHG offer coated glass for avoid damage caused by water sediments.
temperable mirror is processed by sputtering coating technology craft, without painting in the backing side. temperable mirror can be tempered as float glass to increase the safety factory . temperable mirror is more durable without stainted edge problem caused by backing painting.
Product Description Name: KISHO X-02 Maintain agent for glass coating layer Dosage: 25 ml per pallet Price: one liter to do 40 car or so product ingredient: silicone resin Product Feature 1 After plating the crystal construction, in the initial hardening of the film after the use of crystal curing agent, can effectively avoid Avoid the rain, and play a role in the protection film plated crystal hardening stage; 2 After plating crystal construction, brightness and water allocation effect will be reduced according to the use of the car,When can the construction plated crystal curing agent, to supplement the paint and brightness of the water repellent effect. Product Specification / Models Name: KISHO X-02 Maintain agent for glass coating layer Dosage: 25 ml per pallet Application After wiping the body, the plating crystal curing agent is sprayed onto the wet towel to dry the wet towel.Alternating vertical coating, and then dry towel polishing, complete a layout of the construction Other Information To avoid high temperature and frozen storage; avoid direct sunlight; please do not put Save in the vehicle.
