Find Verified Jktl Fully Welded Ball Valve Suppliers, Manufacturers and Wholesalers

Structure: The valve is made up of all welded body and PTFE gasket, can run long life under the condition of frequent operation¡¡éimpurities and chemicals. Fine grinding stainless steel sphere can guarantee for years to open and close freely and reliable operation. The structure of floating ball,.The elastic washer in the slope can guarantee for the sealing ring compression on the sphere,the valve can guarantee closely even though in the case of pressure is not stable. Containment spindle is made up of two o-ring seals,The top of small diameter of the valve can be changed. Both can be replaced of DN65--DN300. THE PTFE thrust washer is between the stem shoulder and stem chamber,it also can play the role of sealing. The stem chamber of the ball valve that more than DN65 equipped with stainless steel bearing. Features: Don't need maintenance, adjustments and lubrication,Easy to install,Long-term reliable operation in the Low operating cost. The valve stem can be longer, easy to heat preservation. Operating handle can be removed, reversing the installation. The body does not contain heavy and unreliable castings. It is very convenient of the install mediation organization. The curve of the pressure/temperature (Not suitable for steam) wooden box with filling or according customer's requirement

Jktl fully welded ball valve conform to one or more of the following specifications for pressure, Temperating ratings and dimensions: asme/ansi, iso 14313/api6d, iso 10423/api6a, Iso 14723/api 6dss, din, afnor, british standards, iso 9000 and api q1.

Zhejiang Jinpu industry Co., LTD., located Wenzhou, "China Pump & Valve hometown". Our company has passed CE, ISO9001, API6D, and we enjoys good reputation in the valve industry with company area more than 20000 square meters, 50 million RMB registered capital, advanced production and test machines, more than 120 staffs, 30 professionals, 12 engineers, which are the main reason of becoming the one of leading manufacturers in the China. Quality assurance depends on advanced equipment, such as vertical lathe, high performance horizontal machining center, numerically-controlled machine, drilling machine, welding machine & test machine etc; our company is fully equipped with them. Our main product: Ball valve, gate valve, check valve & globe valve. Up to now, our company's products are acceptable by worldwide customer, just like, USA, Japan, Europe & Middle East etc. In order to offer our customer better service, our boss always need all of the staffs to say something advice of improvement and respond customer's demand instantly. In the meantime, a piece of words always keep us in mind, "Golden quality, Sailing around the world'. Product Name Full-welded ball valve Nominal Diameter 2"~48"(50mm~1200mm) Operating temperature -196ºC~593ºC(the temperature will be changed by different materials) Operating pressure 150-2500 CLASS Steel Material Main material: A105N;A182 F304, F304L, F316, F316L, A352 LF2, etc. Design standard API 6D, ASME B16.34 Face to Face Dimension ASME B16.10 End Connection Dimension ASME B16.5, ASME B16.25 Test standard API 598, ISO 5208, API 6D

Fully welded ball valves, TFC China. Sea worthy plywood cases.

Fully Welded Ball Valve Butt Weld

Features: 1) the small flow resistance; 2) simple structure; 3) small volume, light weight; 4) the ball valve sealing surface of the plastic material selection, good sealing, 5) easy to operate, open and close quickly, facilitate remote control; 6) easy maintenance, sealing ring, which generally remove easy to change; 7) full open or full close, sphere and valve seat sealing surface and the dielectric isolation, medium through does not cause the valve sealing surface erosion.

Size Range: DN50-DN1600 Pressure: Class150--Class300 PN16-PN40 Temperature: -29 200 Connection end: BW Operation: Manual,Pneumatic,Electric,Hydraulic Material: Carbon steel,Low temperature steel,Stainless steel etc.

Fully Welded Ball Valve Size Range: DN50~DN300 Pressure: Class 150~300(PN16-PN40) Applicable temperature: -29 200 Connection end: BW Operation: Manual,Pneumatic,Electric,Hydraulic Material: Carbon steel,Low temperature steel,Stainless steel etc.

Flange connecting end¡êoasme b16.5/asme b16.47 Butt welding connecting end¡êoasme b16.25/ asme b31.8 Wall thickness¡êoasme b16.34 Fireproof test¡êoapi 607/api 6fa Inspection and test¡êoapi 6d Pressure and temperature rating¡êoasme b16.34 Product scope¡êonps 4171;nps 60, cl150171;cl1500 Main body material: a105, lf2, f304, f316, f304l, f316l, f51 etc. Valve seat material: ptfe, rptfe, nylon, devlon, derlin, peek, ppl, hnbr, fkm or metal hard seal etc. Drive device: handle, worm wheel, electric, pneumatic, pneumatic-hydraulic, electro-hydraulic, etc.

Fully welded ball valve FREE-Valves Fully Welded Ball Valve are widely used in almost all the industry .Compared to the general casting ball valve, fully welded ball valve have a highly performance and longer life time . It was widely used in city gas ,city heat supply ,oil chemical industry, ship building ,steel ,power plant etc . Fully welded ball valve can be reliable run in the long time ,easy to be installed and less maintenance work . Benefits 1.Valve body material is the same as the pipe material , so they will not occur transformation due to unbalanced stress . 2.Face to face dimensions can be made according to customer requirement. 3.Material of valve seat is made up of PTFE+20%C se align ring and metal sealing ,which can adapt to the change of pressure and temperature, So the leakage will not occur during the pressure and temperature range. 4.The ball body has a highly machining precision due to the tracking of computer detector, so the ball valve was shut off/shut on c onveniently. Valve Specification Type : FRQ61FC,FRQ361FC Size Range:NPS2~NPS48 , DN50 ~DN1200 Pressure Range :Class150~Class600,1.6MPa~4.0MPa Material of valve body: A105,F304,F316 Connect Method :welding Design standard:ASME B16.34,API6D Test and Inspect:API598 Face to Face:ASME B16.10 Medium :Water ,oil ,gas ,acid ,alkaili etc Driving method : electric ,handle, worm gear etc . Application industry: centralized heating, coal gas pipe, waste gas treatment system, heat supply system

Fully welded ball valve Free-valve's fully welded ball valve are widely used in almost all the industry .Compared to the general casting ball valve, fully welded ball valve have a highly performance and longer life time . It was widely used in city gas , city heat supply , oil chemical industry, ship building , steel , power plant etc . Fully welded ball valve can be reliable run in the long time , easy to be installed and less maintenance work . Benefits 1.Valve body material is the same as the pipe material , so they will not occur transformation due to unbalanced stress . 2.Face to face dimensions can be made according to customer requirement. 3.Material of valve seat is made up of ptfe+20%c sealing ring and metal sealing , which can adapt to the change of pressure and temperature, so the leakage will not occur during the pressure and temperature range. 4.The ball body has a highly machining precision due to the tracking of computer detector, so the ball valve was shut off/shut on conveniently. Valve specification Type : frq61fc, frq361fc Size range:nps2~nps48 , dn50 ~dn1200 Pressure range :class150~class600, 1.6mpa~4.0mpa Material of valve body: a105, f304, f316 Connect method :welding Design standard:asme b16.34, api6d Test and inspect:api598 Face to face:asme b16.10 Medium :water , oil , gas , acid , alkaili etc Driving method : electric , handle, worm gear etc . Application industry: Centralized heating , coal gas pipe, waste gas treatment system, heat supply system.

API Fully Welded Body Ball Valve Product design and scope Design standard:API 6D Length of structure:API 6D. For product beyond the scope of the standard, it shall be manufactured by specifications in BTL standard or user's requirements. Flange connecting end:ASME B16.5/ASME B16.47 Butt welding connecting end:ASME B16.25/ ASME B31.8 Wall thickness:ASME B16.34 Fireproof test:API 607/API 6FA Inspection and test:API 6D Pressure and temperature rating:ASME B16.34 Product scope:NPS 4�~NPS 60�,CL150~CL1500 Main body material:A105,LF2,F304,F316,F304L,F316L,F51etc. Valve seat material:PTFE,RPTFE,NYLON,DEVLON,Derlin,PEEK,PPL,HNBR,FKM or metal hard seal etc. Drive device:handle, worm wheel, electric, pneumatic, pneumatic- hydraulic, electro-hydraulic, etc. -