1. Adopt infrared weld technology which independent exploration.
2. Use infrared heat, it is easy to cut through, heat proportion piercing tradition weld machine with sirocco.
3. Easily operate. Just need one day training. Can operation this machine.
4. No need weld tools, it can weld all the component of 15x15-25x25mm.
5. This machine has 650w heating system. Widely to 80x120mm.
6. Infrared heating no have sirocco flow. Don't impact perimeter small component. Suitable for all of the
Component, especially micro bga component.
Suitable for all of the component, especially micro bga component.
1. Adopt infrared weld technology which independent exploration.
2. Use infrared heat, it is easy to cut through, heat proportion piercing tradition weld machine with sirocco.
3. Easily operate.Just need one day training.Can operation this machine.
4. No need weld tools, it can weld all the component of 15x15-35x35mm.
5. This machine has 650w heating system.Widely to 120x120mm.
6. Infrared heating no have sirocco flow. Don't impact perimeter scomponent. Suitable for all of the component, especially micro bga component.
Features
1. Adopt infrared weld technology which independent exploration.
2. Use infrared heat, easy to cut through, heat proportion piercing tradition weld machine with sirocco.
3. Easily operate. Just need one day training. Can operation this machine.
4. Don't need weld tools. This machine can weld all the component of 35x35-50x50mm.
5. This machine has 800w heating system. Widely to240x180mm.
6. Infrared heating don't have sirocco flow. Don't impact perimeter small component. Can suitable for all of the component, especially micro bga component.
7. Definitely can satisfy the computer, the notebook, the electricity swims and so on the bga sealing off/repairs to request specially especially suits to the computer north and south bridge
1104 Irda Welder T862 Suppliers
Short on time? Let Irda Welder T862 sellers contact you.
1. Adopt infrared weld technology which is developed independently.
2. Use infrared heat lamp. Heat is easy to pierce and distribute evenly, which overcome disadvantage (burn out elements) of traditional welder machines.
3. Easy operation. Just need one-day training, you can operation it skillfully.
4. Don't need weld tools. Irda welder t870 can weld all the elements between 35x35-50x50mm.
5. This machine has 800w hot-melt system. Its preheating area is 240x180mm.
6. Infrared heating don't have sirocco flow. Don't impact circumjacent small elements. It is suitable for all of the elements. It can be used to unsolder bgasmdcsplgaqfp and plcc, especially micro bga and smd elements.
7. Definitely satisfy bga unsoldering/repair of mobiles, computers, notebooks, the electronic game machines and so on; especially suits to the computer north and south bridge chip
The KARAM ES71 Welding Shield is a high-quality personal protective equipment designed for professional welders. It features a clear polycarbonate lens with shade 9-13 for maximum clarity and protection from harmful UV and IR radiations. The helmet is lightweight and comfortable to wear, and its adjustable headgear provides a secure fit. The helmet is also equipped with a convenient grinding mode, allowing the welder to switch to grinding tasks quickly and easily. The KARAM ES71 Welding Shield meets international safety standards and is suitable for various welding applications.
The KARAM ES61 Welding Shield is a highly protective and reliable headgear designed for professional welders. This shield features a clear polycarbonate visor that provides a clear and wide view, ensuring optimal safety and comfort. The visor is adjustable and can be easily tilted to different angles, giving the welder complete control over their work. The shield is also equipped with a flame-retardant headgear made of high-density polyethylene material that offers a comfortable and secure fit. With its lightweight construction and user-friendly design, the KARAM ES61 Welding Shield is a must-have for any welding professional.
The Fibre Metal F400 Head Gear is a durable and comfortable headgear for welding helmets. It features a 4-point suspension system for stability and comfort during extended use. The headgear is adjustable for a custom fit, and its sweatband helps to wick away moisture for added comfort. The Fibre Metal F400 Head Gear is compatible with a variety of Fibre Metal welding helmets, and its high-quality construction ensures reliable performance for professional welders.
Heavy Duty Welder Gloves made in Cowhide Split Leather with reinforcement on palm. Higher thickness about 1.3-1.4 mm of leather makes it more stronger and reliable in any difficult task of industrial flame or Heat Work especially Welding and steel Industries.
Cotton lining and Kevlar Thread protect hands from higher flame and heat.
Double split layer on palm gives extra strength.
Leather Welder Gloves made by Cowhide Split Leather Stitched with Kevlar Thread, Reinforced on Palm complying Cat II and EN 407. Soft and Durable inner cotton lining. Highly quality leather 1.3-1.4mm Thickness and 1.1 mm Reinforcement.
Ck777d
Brief intro:
Dedicated infrared heating with strong penetration capability in evenly heated parts. A breakthrough over disadvantages from traditional hot air desoldering station which covers elements when heating, causing higher thermal impact.
Features£º
-esd safe unit
-led temperature display
-infrared desoldering technology through independent development and research.This machine can desolder all components in 15-45 mm size.
-infrared heating and desoldering twice faster than hot air gun, greatly reduce heat damage rate on device
-infrared heating has no hot air flow and will not affect the surrounding small components. It is applicable to all small components especially micro bga component.
-lamp handle is installed with sensitive magnetic sensor. When lamp handle is held down facing floor, system is directly set to work mode. When it put back to handle bracket (on position), system is automatically set to standby mode, it is convenient for real-time operation.
-can be integrated with our 853 series preheating station which has 500w heating system and preheating area of 120 mm in width and 120 mm in height.
-warranty: 1 year parts and labor. Please contact us for claims or damaged or missing parts (accessories) within 7 days from date of purchased
Specification:
Current voltage(ac):220 + 10%
Current overload protection: >= 6a
Power consumption:180 w
Infra red temperature: 200-380 c, adjustable
Dimension£º31.2*28*15.5cm
Weight: 3.6 kg
Pc/ctn£º6
Package contain:
Rework station 1
Lamp handle 1
Handle bracket 1
Two-core power cable 1
User manual 1
Warranty card 1
Dimension£º31.2*28*15.5cm
Weight: 3.6 kg
Pc/ctn£º6
1). Availble as a single gun (101) or two guns (201) welding System with independent and stepless time and currtent controls. Dual gun System has inter lock feature.
2). Automatic current regulation by fully closed loop D. C. Shunt feedback System ensures consistent delivery of optimum weld energy.
3). Current monitor will activate indicator lamp if desired current can't not be delivered.
4). Digital read out of actual weld time and current of last weld assists in set up and quality control.
5). Solid state control circuitry produces maximum reliability and accuracy of all functions.
6). Two wire control system miniminzes control cable and connector maintenance.
7). Deck weld feature sleectively adds hot plunge time for weld through deck applications.
8). Other features include chuck saver circuit, quick shutdown, lift check, and safety shut down.
9). Same as NELSON6000 profiles and control system.
Detail specifications:
Transforma Rating 7600 amps
Stud range 5/16" through 1"(8mm-25mm)
Fusing 400amp@230v and 200amp @460v&550V
Timing control 0.1-1.5 seconds, stepless
Regulated ourput 400-2150 amps, stepless
Case dim 860mm*560mm*1220mm
Weight: 450kg.
* Managing welding machine facilities and maintenance history by the use of infrared-ray communication
* IR TAB - Attached to the main body of the welding machine, it saves the data of facility number, verification and correction.
* IR Terminal - Recording and Searching the data of IR - tag by the use of infrared-ray communication and inter working with PC
Seam welder is used to weld a short piece of coil into pipe.
FUGE designs the seam welder applicable to various material. It's also installed with auto wire feeder for thick pipe, and also configured with option for auto alignment device as to help operator handling the seam welder easier.
Seam welder contains many different models based on different welding length. The longer the seam welder is, the stronger the welding shaft will be, and then the bigger its minimum applicable diameter.
Wax Welder
Model No.: HJ-233
SPECIFICATIONS of Jewelry Wax Welder
Model HJ-233
Voltage 220V
Packing size 265*165*100mm
Shipping Weight 2kg
HAJET was established in Shenzhen city in the year of 2004, specializing in R&D, manufacturing and marketing of casting, Melting Furnaces, Annealing Furnace, polishing, finishing machines and jewelry tools, which is committed to provide convenient and fast services to every of our customers worldwide.
.Geomembrane Welding machine description:
This geomembrane extrusion welder is the first one in China that has functions of double independent heating systems, digital display controller, 360-degree rotating welding head, motor cold start protection, which is applicable to welding PE,PP,PVDF and other hot melt materials.
GW800 Geomembrane welding machine can weld geo-membrane of various thickness and are applicable for welding of all thermal-fused material such as LDPE, PVC, HDPE, EVA, PP and so on. The control of this series of welding machine adopts PID automatic thermostatic control with high control accuracy and low temperature fluctuation; speed control adopts PWM automatic voltage and speed regulation circuit, driven by DC servo motor, with great output torque and the operating is stable. It can maintain a constant speed on the condition of creeping, vertical creeping and variable road load. Also this series of welding machine is stable in performance despite of external temperature and voltage variation.
