Ck777d Brief intro: Dedicated infrared heating with strong penetration capability in evenly heated parts. A breakthrough over disadvantages from traditional hot air desoldering station which covers elements when heating, causing higher thermal impact. Features£º -esd safe unit -led temperature display -infrared desoldering technology through independent development and research.This machine can desolder all components in 15-45 mm size. -infrared heating and desoldering twice faster than hot air gun, greatly reduce heat damage rate on device -infrared heating has no hot air flow and will not affect the surrounding small components. It is applicable to all small components especially micro bga component. -lamp handle is installed with sensitive magnetic sensor. When lamp handle is held down facing floor, system is directly set to work mode. When it put back to handle bracket (on position), system is automatically set to standby mode, it is convenient for real-time operation. -can be integrated with our 853 series preheating station which has 500w heating system and preheating area of 120 mm in width and 120 mm in height. -warranty: 1 year parts and labor. Please contact us for claims or damaged or missing parts (accessories) within 7 days from date of purchased Specification: Current voltage(ac):220 + 10% Current overload protection: >= 6a Power consumption:180 w Infra red temperature: 200-380 c, adjustable Dimension£º31.2*28*15.5cm Weight: 3.6 kg Pc/ctn£º6 Package contain: Rework station 1 Lamp handle 1 Handle bracket 1 Two-core power cable 1 User manual 1 Warranty card 1 Dimension£º31.2*28*15.5cm Weight: 3.6 kg Pc/ctn£º6
- esd safe unit provides extra safety for sensitive component -combination of hot air rework station and soldering iron.Each part work individually. -it has three knobs which control hot air volume, hot air temperature, and soldering iron temperature. The hot air volume knob has 8 shifts, which provide option on air flow speed and volume for different use . - soldering iron use light weight handle design, suitable for use a long time.The soldering iron can be unplugged or plugged easily - the mode and specification of iron and heating element are same as any international brand name, so they can be exchanged very easily. - high quality ceramic heating element, it can accurately control the temperature, also can rise the temperature to a high level in a very short time. General specification Current voltage(ac);220 + 10% Current overload protection : >= 4a Hot air station Power consumption:270 w Hot air temperature: 100-420 c, adjustable Output airflow: 0.3-24l/min, adjustable Pump power£º45w Heater: 250w metal Type of pump£ºmembranous Soldering station Power consumption:60 w Output voltage (ac) : 24v Soldering temperature : 200 - 480 c, adjustable Heating element : ceramic heater Dimension£º33*27.5*20cm Weight : 2.95 kg Pc/ctn£º6
Ck850x Brief intro: Hot air rework station cellkit 850x with anti static designed, is aimed at repairing mobile phone and other communication apparatus., hot air gun equipped with magnetic sensor, and adjustable range air, . Suitable for desoldering and soldering smd, off, plcc, qfp , bga and soic, etc. It is essential equipment for people who is doing repairing job and business. Features£º -esd safe unit. -hot air gun handheld equipped with magnetic sensors .When handle picked-up from bracket, system will start to work¡£when it put back at bracket, the system will automatically standby -microprocessor precisely controls temperature and airflow, -internal pump:incorporates a quiet running, maintenance free pump -ceramic element: a long life ceramic heater insures accurate and sufficient heat where you need it -maintains a constant set temperature when the set and the value is reached -rapid heating high performance hot air gun -an automatic cooling mode., after the power switch is turned off, an automatic blowing function would keep sending cool air in order to prolong the life of pipe and handle - economical :the same nozzle can be used for soldering and desoldering.- 3 focus hood 5mm, 7mm, 9mm -warranty: 1 year parts and labor. Please contact us for claims or damaged or missing parts (accessories) within 7 days from date of purchased Specification: Current voltage(ac):220+10% Current overload protection :>=4a Power consumption£º270w Hot air temperature:100-420 c, adjustable Output airflow: 0.3-24l/min, adjustable Pump power£º45w Heater: 250w metal Type of pump£ºmembranous Total dimension: 33*28*20cm Weight: 3, 3 kg Pc/ctn: 6 Package contain: Rework station 1 Hot air gun 1 Handle bracket 1 Nozzle focus hood 5mm, 7mm, 9mm 1 each User manual 1 Warranty card 1 Total dimension: 33*28*20cm Weight: 3, 3 kg Pc/ctn: 6
Supplier: Led bulb, tube light, panel light, decoration light, wall light, steel wires, steel plate, stainless steel plate, twisted wire rods, galvanized wires, wire mesh, site fencing, mosquito mesh, thread rods, rebar, twisted rods, t bar, nuts and bolts, hardware, pvc pipes, upvc pipes, api pipes, melamine, mdf board, plywood, film faced, shuttering, packing, core veneer, face veneer, hdf molded door skin, door filler, tubular particle boards, pvc boards, wpc boards, doors, block board, hard board, gypsum board, canopy, carpet, flooring wooden, bamboo, laminated engineering, tiles, granite tiles, granite blocks, black galaxy, wash basin, water closets, washbasins, ss sinks, faucets, furniture, pvc edge bending, crew, locks, pvc seals, silicone cartridges, shower enclosures, shower door hinges, handles, knobs, brackets, slides, nails, solar panels, flexible solar panels, solar power station, battery, inverters, rechargeable fans, lights, spring, 3ply disposable face mask, oxygen concentrator ,
Services: Buying office, oem, components sourcing, value added services
Buyer: In shell pecan nut, macadamia nut
Material: high carbon spring steel, spring steel, stainless steel, alloy steel Compression Spring, Extension Spring : Wire Diameter: 0.2-40.0mm Torsion spring wire diameter :0.2-35mm Surface Finish: black , Zinc, Nickel, silver, golden, tin, powder coating, shot pin Applications: Automotive, medical device, agricultural machinery ,electronics, toy, electric power distribution. Extension spring hook include Germany hook, British hook, Side hook We can customize special design of springs based on your requirement.
Supplier: Nitrile gloves, latex gloves, face mask, covid 19 test kit, safety gloves, industrial gloves, oils for food & cosmetics, rice, agricultural products, tuna, shampoo
used cars, brand new cars, buses, truck, battery for cars, tire scraps
Services: Shipping, clearing agency, tender for korea government.
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc ( +10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80 C. When the DC panel has a temperature over 100 C, the module will stop working; when the DC panel has a temperature below 90 C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75200 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".
SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic. Functional details 1. Hot plug Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system. 2. Advanced current sharing technology Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A. 3. Control of input limited power Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode. 4. Control of output constant power When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module. The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V. The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage. 5. Temperature limited power 6. Regulation of output current limiting point 8. Regulation of output voltage The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc. 9. Fan control The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module. 10. Protection of input overvoltage/ voltage shortage 11. Output overvoltage protection The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection. 12. Over-temperature protection The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again. 13. Protection of internal bus fault When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on. 14. Short circuit protection In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".