Interior And External Plaster And Repair Mortar Suppliers and Manufacturers

Bitumen Primer * Bitumen Primer is Bituminous air curing ready mixed Acid & Alkali resistant special primer. Application * Concrete surface must be clean, dry and rough. No primer should be applied over smooth and wet surface. * After cleaning the concrete surface, one coat of Bitumen Primer should be applied with brush and allow to dry thoroughly. * The drying time will depend upon the temperature. * 24 Month at the temperature 30C (+2OC) Packing * Bitumen Primer: 25 Liter Drum Note * Bitumen Primer contains volatile and slightly toxic solvent. Keep away from spark and open flames at working area. * Bitumen premier it is manufactured using bitumen solution which is used for sealing of prime porous and non-porous surface, and also to protect residential and commercial building. * Bitumen Primer is used to protect substrate against corrosive attack, is suggested to apply anti-corrosive primer.It is best for protection against sub-striate against atmospheric corrosion and chemical corrosion. It is a mixed substance made up of organic liquids that are highly sticky, water proof, viscous,acid proof as with all surface coating, good Bitumen Premier is used for long life of the system. it is applied by brush or roller and allowed to dry before any water proofing treatment so to avoid solvent it is used in defects such as cracks, broken mortar joints, etc. are to be repaired prior to Bitumen primer application. Product Details: Grade Standard Technical Grade Physical State - Liquid Usage - Industrial Color - Black Characteristics: Appearance/Color - Pasty liquid/ black Chemical Base - Bituminous rubber emulsion. Density - 1.0 kg/l Curing Speed/ Rate - 3 - 4 hours Tack free after - 5 - 10 hours Cured after - 2 - 4 days (Dependent on ambient Solid Content by - temperature, substrate temperature, Weight - relative Water Content by weight - humidity and thickness of the coating) Bitumen Content - 41% by weight - Thixotropic (The viscosity can be adjusted by - Viscosity adding up to max. 5% of clean water. - Stir well prior use) - For light protection: 1.0 mm min. Coating - For greater protection: ~ 1.5 - 2.0 mm Thickness applied - in two coats. Water Penetration - 48 h, 1 bar: 78.5 cm2: 0 ml under Hydrostatic - 96 h, 4 bar: 78.5 cm2: 33 ml Pressure - Water vapor 6 x 10-7 mg / hmPa Permeability Service - -30 C to 200 C Temperature - Adhesion Concrete - Very good, Timber: Very good, Metal: Moderate Glass: Poor

DATA SHEET FOR EPOXY EPOXY COATING :- INTRODUCTION - EPOXY COATING (HYB) is a two part high solids solvent free epoxy phenolic resin based coating system designed for hard wearing, smooth surface finish for floors, walls and on steel structures. Nonskid surface finish can be achieved on floor, if required. FEATURES: 1) Hard Wearing 2) Non Dusting 3) Excellent Surface Finish 4) Non Smelling 5) Good Aesthetics 6) Highly Chemical Resistant APPLICATION: 1.Stir well before mixing Part A and Part B and mix in the prescribed ratio. 2.Apply one coat of EPOXY primer on the clean and dry surface. 3.EPOXY COATING (HYB) should be applied on the surface by brush or roller within 24 hrs. After application of primer coat it should be allowed to air dry for min. 4 hrs. Preferable in a dust free atmosphere. 4.Apply min. 2 coats with the intercoat interval of 6-8 hrs. PRODUCT SPECIFICATIONS: Application - Brush, Roller Mixing Ratio - As Directed on Packing Port Life - 30 Mins. Drying Time - Touch Dry- 30 Min, Hard Dry 6 Hrs. - Intercoat Interval 6-8 Hrs. Min. - Dry Film Thickness 125-150 Microns/per coat - depending on porosity Covering Capacity - 6-8 sq.met/kg per coat depending on porosity, roughness & method of application. Color Shades - All Standard Shades RECOMMENDED USES: 1) Food & Pharmaceutical 2) Work Shop 3) Clean Room Application 4) Chemical Resistant Coating for Concrete& Steel 5) Petrochemical, Fertilizer plants METHOD OF APPLICATION: SURFACE PREPARATION The long-term durability of the applied Epoxy coating (HYB) epoxy coating is dependent on the adhesion between sub-base and coating material. It is most important therefore, that the substrate surfaces are correctly prepared prior to application. 1.Before application of the Epoxy coating (HYB) surface should be free from loose partials, rust, oils, grease or earlier coatings and should be totally dry. 2.New concrete or cementations surface should be placed at least 28 days and have a moisture content of less than 5% before application of Epoxy coating (HYB) 3.After surface is dry, all repair work like sealing of joints, cracks filling of cavities and crevices should be carried out. HEALTH & SAFETY - Keep the containers tightly closed when not in use. Avoid contact with skin & eyes. It comes in contact with the body, wash affected parts with plenty of water and contact a doctor. Other known sector for Epoxy floor lining, Epoxy garage floor lining, Concrete epoxy lining, Concrete floor epoxy lining, Epoxy pipe lining, Marine epoxy lining, Sub marine epoxy lining, Basement lining epoxy floor shield, Louisiana, Oregon, Chip lining color epoxy floor, Aviation lining epoxy interior.

Powder Glue, construction adhesive heat resistant tile adhesive Porcelain Tile Adhesive is also known as the ceramic tile or ceramic tile adhesive glue, points type, polymer type, heavy brick, is a newly developed products, mainly used for stickup ceramic tile, brick, tile and other decorative materials, widely used in internal and external walls, floor, bathroom, kitchen, and other places of building the veneer of decoration. 1.Product Description: Product Name : BE GOOD Strong Adhesion� Tile Adhesive Type : Strong Adhesion Type Color : Grey / White Package : 20kg/bag Application : Tile Adhesive Reference Usage : 2-5kg/ m Mixing Ratio Powder : Water = 20kg : 5 liters Pot Life : 4 hours Application Temperature : 5 - 40 Packaging Details: 20kg/bag  / 72bags/pallet / 20pallets/20GP  /1360 bags/1*20GP Payment: TT Delivery date: 10 to 15 working days. Original country: China 2. Features 1) Strong adhesion and elasticity. 2) Pasting layer is thin and even, and hardly with hollowness. 3) Easy and simple application, no need to pre-moisturize the bricks and walls. 4) Excellent waterproofing performance. Adoption of scraper method will speed up the tiling. 3. Application Range 1) Suitable for interior and exterior use.�  2) Suitable for substrate made from concrete, masonry, pre-cast material and lightweight brick. 3) Suitable for walls, floors and roofs of architects, such as tunnels, bridges, basement, kitchen, bathroom, balcony, swimming pool and reservoir and so on. 4) Suitable for architects with structure which might easily vibrate and split, such� as post-cast strip, pipe orifice.

it is mainly used for color cement, color cement floor tiles, color cement tiles, imitation glazed tiles, concrete floor tiles, color mortar, color asphalt, terrazzo, mosaic tiles, artificial marble and wall painting. 2. It can be used for colouring and protecting substances of various coatings, including water-borne interior and exterior wall coatings, powder coatings, etc. It can also be used for various primers and topcoats such as epoxy, alkyd, amino, etc. in oily paints, as well as for toy paints, decorative paints, furniture paints, electrophoretic paints and enamels. Iron red primer has anti-rust function, can replace high-priced red red paint, save non-ferrous metals. The manufacturer supplies iron oxide red, iron oxide green, iron oxide blue, iron oxide yellow, iron oxide violet, iron oxide brown, iron oxide black and so on. The color is complete, the quantity is large and the discount is favorable. Support mixed batches. Welcome to call for consultation.

Product Name: Octapeptide-2 INCI Name: OCTAPEPTIDE-2 Molecular Formula: C38H60N10O16S Molecular Weight: 945.01 Appearance: White powder Purity: 99% CAS Number: 1374396-34-5 Standard: Enterprise Standard Supplier: ZhenYiBio Octapeptide-2 is a new type of polypeptide that promotes hair growth. Octapeptide-2 has a biological activity similar to T�²4. It can activate hair follicle stem cells, promote the growth, migration and differentiation of hair follicle stem cells, while reducing the expression of extracellular matrix degrading enzymes and increasing the synthesis of collagen, elastin, and fibronectin, reconstruction and repair The dermis provides a good external environment for the development of hair follicles.

Other Name: Natural Resveratrol INCI Name: RESVERATROL Molecular Formula: C14H12O3 Molecular Weight: 228.24 Appearance: Off-white powder Purity: 98% CAS NO.: 501-36-0 EINECS No.: 610-504-8 Standard: CP,USP Application: cosmetics and skin care products Supplier: ZHENYIBIO Resveratrol has a good antioxidant function, especially it can resist the activity of free genes in the body. It has the ability to repair and regenerate the cells of aging skin, thus making your skin more elastic and whitening from the inside to the outside. In cosmetics, resveratrol mainly plays an anti-aging effect. Resveratrol is a natural antioxidant that eliminates or inhibits the generation of free radicals, inhibits lipid peroxidation, and regulates the activity of antioxidant-related enzymes. And other mechanisms play an anti-oxidant effect. Resveratrol can repair damaged cells, rapidly regenerate cells, revive necrotic tissue cells, vigorously grow atrophic nerves, scavenge free radicals, discharge heavy metal toxins, restart the body's powerful self-repair ability, and improve the vitality and youth index. Make the skin whiter, moisturized and elastic. Main Function: 1. Resveratrol has strong antioxidant and anti-free radical effects.The aging of human skin is mainly caused by oxidative damage caused by the influence of external substances.Therefore, the antioxidant activity of resveratrol plays a particularly important role in skin aging. 2. Dry skin are also skin problems that plague many people.If resveratrol is used as an additive in some cosmetics and skin care products, as a star beauty and health care product,it can have a significant water-locking effect on the skin and keep the skin moist and elastic. 3. Resveratrol has a good removal effect on skin freckles, chloasma, acne and acne.Resveratrol itself is easily absorbed by human skin cells, so when used as a skin care product,it has a very obvious improvement effect on the skin. 4. Resveratrol also has a certain mechanism of action in protecting the skin from radiation. Resveratrol can effectively protect the skin from the damage of these radiation sources under the damage of external factors such as computers, mobile phones and ultraviolet rays.

Product Descriptions: The Eshaq rug is a luxurious and eye-catching piece that adds a touch of opulence to your living space with its radiant gold color. Hand-tufted with meticulous craftsmanship, this rug features a contemporary design with abstract art elements, creating a visually stunning focal point in any room. Crafted from high-quality materials, including woollen yarn (50%), viscose (29%), and cotton yarn (21%), it offers both durability and a soft, plush feel underfoot. With its unwashed state, the rug preserves its original charm and texture, showcasing its natural beauty. Perfect for the spring season, the Eshaq rug brings a warm and vibrant atmosphere to your home, adding a touch of elegance and style to your interior decor. Care And Repair : Vacuum once a week. Gently brush the surface to remove dust. Blot with paper and remove spills immediately. Use professional carpet cleaning services only.

Product Descriptions: The Apohis rug is a stunning piece that combines abstract geometric design with a warm rust color. Hand-tufted with care, it adds a contemporary touch to any space. The rug's intricate abstract art elements create a visually captivating pattern. Crafted from high-quality materials, including woollen yarn (46%), viscose (31%), and cotton yarn (23%), it offers durability and a plush feel. With its unwashed state, the rug preserves its original charm and texture, showcasing its natural beauty. Perfect for spring, the Apohis rug brings a vibrant and lively atmosphere to your home, infusing it with style and personality. It is the perfect choice to elevate your interior decor. Care And Repair : Vacuum once a week. Gently brush the surface to remove dust. Blot with paper and remove spills immediately. Use professional carpet cleaning services only.

Product Descriptions: The Aten rug is a remarkable piece that embodies contemporary elegance with its neutral tones. Hand-tufted with precision, this rug features an abstract art design, adding a touch of modernity to any space. Crafted from high-quality materials, including woollen yarn (49%), viscose (30%), and cotton yarn (21%), it offers a luxurious and durable texture. Being unwashed, the rug retains its original allure and natural beauty. Perfect for spring, the Aten rug brings a sense of freshness and rejuvenation to your home, complementing your interior decor with its sophisticated aesthetic. It creates a serene and inviting atmosphere, making it a perfect addition to your living space. Care And Repair : Vacuum once a week. Gently brush the surface to remove dust. Blot with paper and remove spills immediately. Use professional carpet cleaning services only.

Product Descriptions: Introducing the Abstract Hattie Rug - a contemporary masterpiece hand-tufted with precision and care. This rug boasts a stunning abstract art design with bold and vibrant horizontal lines in rust, coral, ivory, and grey hues set against a neutral grey background, perfect for any modern interior. Made with premium quality materials, this rug is not only durable but also incredibly soft to the touch. Its versatile design makes it ideal for both indoor and outdoor use, making it a practical and stylish addition to any living space. Bring home the Abstract Hattie Rug and elevate your home decor game. Care And Repair: Vacuum once a week. Gently brush the surface to remove dust. Blot with paper and remove spills immediately. Use professional carpet cleaning services only.

Asenath Hand Tufted Woollen And Cotton Rug Product Details : Introducing the Asenath rug, a contemporary masterpiece that combines abstract art with geometric elements. Hand-tufted with meticulous attention to detail, this rug features a captivating design in shades of grey, adding a touch of sophistication to any room. Crafted with high-quality materials, including luxurious woollen yarn (75%) and soft cotton yarn (25%), the rug offers both durability and a plush feel underfoot. The lustre wash finish adds a subtle sheen, enhancing the rug\'s visual appeal. Perfect for the holiday season, the Asenath rug brings a sense of elegance and warmth to your space, creating an inviting atmosphere for gatherings and celebrations. Elevate your interior decor with the Asenath rug and enjoy its artistic beauty and luxurious comfort year-round. CARE & REPAIR: Carpet Vacuum once a week. Gently brush the surface to remove dust. Blot with paper & remove spills immediately. Use professional carpet cleaning services only.

Glass fiber mesh cloth alkali resistant and crack resistant plastering of internal and external walls on construction site

GGBFS Ground granulated blast furnace slag (GGBFS) The ground granulated blast furnace slag (GGBFS) is a by-product of iron manufacturing which when added to concrete improves its properties such as workability, strength and durability. This material is obtained by the heating of iron ore, limestone and coke at a temperature about 1500 degree Celsius. The process is carried out in a blast furnace. The formation of GGBFS is not direct. The by-product of iron manufacturing is a molten slag and molten iron. The molten slag consists of alumina and silica, also with the certain amount of oxides. This slag is later granulated by cooling it. For this, it is allowed to pass through a high-pressure water jet. This result in quenching of the particles which results in granules of size lesser than 5mm in diameter. The main constituents of blast furnace slag are CaO, SiO2, Al2O3 and MgO. These are the minerals that are found in most of the cementitious substances. The particles are further dried and ground in a rotating ball mill to form a fine powder, known as ground granulated blast furnace slag cement. Now different methods can be employed to perform the main process called as the quenching. Applications & Benefits of GGBFS: In concrete: The incorporation of ground granulated blast furnace slag in concrete manufacture gains many advantages which are mentioned below: GGBFS in concrete increases the strength and durability of the concrete structure. It reduces voids in concrete hence reducing permeability GGBFS gives a workable mix. It possesses good pumpable and compaction characteristics The structure made of GGBFS constituents help in increasing sulphate attack resistance. The penetration of chloride can be decreased. The heat of hydration is less compared to conventional mix hydration. The alkali-silica reaction is resisted highly. These make the concrete more chemically stable. Gives good surface finish and improves aesthetics. The color is more even and light. Lower chances of efflorescence. The maintenance and repair cost of structures are reduced thus increasing the life cycle of concrete structures. Unlike cement, GGBFS does not produce carbon dioxide, sulphur dioxide or nitrogen oxides. White Cement: White Portland Cement is of high quality, whiteness and strength, it essentially has the same properties and characteristics as gray cement, except for color. It is widely used in numerous applications such as precast concrete, cast-in-place concrete, terrazzo, median barriers, curbs, tile grout, paint, masonry units, swimming pools, glass fibre reinforced surface bonding mortars.

This wood belongs to the shorea, which is a type of hardwood. It is most often employed in the making of furniture such as a bed, sofa, and also in flooring and roofing applications. Owing to its lightweight and light pink to light brown color variants, this wood is preferred for the interior designing. For this reason, we are facing a huge demand for the product. Meranti is a medium density hardwood. The timber glues with common adhesives, nails easily and stains well allowing ready finished in a variety of interal and external above ground applications. Color: Heartwood varies from pale pink to dark red, or from white to straw to yellow. Sapwood cannot be reliably identified by colour difference Origin: A tropical rainforest species found throughout South-East Asia and the islands of the South West Pacific region including the Philippines, Indonesia and east Malaysia. Application: Plywood, interior furniture, general construction, concrete forms, veneer, and boatbuilding. Item Specification Tree Size: 100-130 ft (30-40 m) tall, 3-5 ft (1-1.5 m) trunk diameter Average Dried Weight: 40.9 lbs/ft3 (655 kg/m3) Specific Gravity (Basic, 12% MC): 0.55, 0.66 Janka Hardness: 1,070 lbf (4,740 N) Modulus of Rupture: 14,080 lbf/in2 (97.1 MPa) Elastic Modulus: 1,781,000 lbf/in2 (12.28 GPa) Crushing Strength: 7,940 lbf/in2 (54.8 MPa) Shrinkage: Radial: 2.6%, Tangential: 5.3%, Volumetric: 7.2%, T/R Ratio: 2

Luxury Children's Bedroom Model for Girls Drawer Sorong Double Bed - This is a product of girls' bed furniture in white Jepara wood and white Duco Jepara with a very luxurious and elegant custom design for your child's bedroom, this latest model of children's bed is very beautiful for children your woman with the latest design which is very sturdy because it is made by original Jepara furniture craftsmen who are very experienced in making Jepara furniture products so that they produce the best quality products. Luxury Children's Bedroom Model for Girls Sorong Drawer Double Bed - Using Perhutani Mahogany Wood (Grade A) and will go through a maximum drying process (Oven) so that it will facilitate the workmanship and finishing process so that the resulting product will be neat, smooth and high quality. The finishing application for this Jepara furniture product, children's bunk bedroom set, uses a White Combi Gold Champagne (Duco) finishing application with an anti-scratch layer (Top Coat) so that the color is smooth and does not fade easily or you can choose the color according to your child's theme or taste, which will look beautiful and attractive. Luxury Home Furniture is a Jepara furniture manufacturer that always maintains the quality of each of our products, we are ready to serve custom design furniture according to your home interior criteria according to your request. Get the best quality Jepara furniture products from us at affordable prices and high quality, we provide a guarantee for every product, we make sure the goods arrive at the place in good condition, if there is damage during delivery we are ready to repair it again, according to our company's goals, customer satisfaction is a priority and as our pride.

Monoblock pumps - Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise thereby increasing the life cycle of the motor. salient features - High operating efficiency resulting in lower power consumption - Good suction lift characteristics - Inbuilt thermal overload protector in al single phase pumpsets upto 2.0 HP - Specially designed for wide voltage operation - Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life - Back pull-out design for easy servicing and repair - Double shielded ball bearings, so no need of external lubrication - All Model fitted to Mechanical seal. specification - Power Range : 0.37Kw - 1.5 Kw (0.5 HP - 2.0 HP) - Version : Single Phase, 220-240V, 50Hz AC Supply Three Phase, 380-415V, 50Hz AC Supply - Speed : 2880 RPM - Maximum Total Head : 32 Mtr. - Maximum Flow Rate : 940 LPM - Maximum Suction Lift : 7 Mtr. - Degree of Protection : IP 44 - Class of Insulation : B0 - Maximum Ambient Tem. : 40 C - Sealing : Mechanical Seal - Type of Duty : S1 (Continuous) - Method of Starting : Permanent Split Capacitor (PSC) - Direction of Rotation : Three Phase, Electrically Reversible - Nominal Pumpset Size (Suction X Delivery in inch) : 25 X 25, 32 X 25, 40 X 32, 40 X 40, 50 X 40, 50 X 50, 65 X 50, 80 X 65, 80 X 80 (All size in mm) characteristics of clear cold water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5 Part Name Material Mechanical Seal : Carbon & Ceramic Motor Shaft : EN-8 Motor Body : FG-250 Bearing : SKF End Cover : FG-250 Bracket : FG-250 Flange : FG-250 Casing : FG-250 Impeller : FG-250 Cooling Fan : Plastic

Monoblock Pumps Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise thereby increasing the life cycle of the motor. salient features High operating efficiency resulting in lower power consumption - Good suction lift characteristics - Specially designed for wide voltage operation. - Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life. - Back pull-out design for easy servicing and repair. - Double shielded ball bearings, so no need of external lubrication. - Mechanical seal is provided as per customers requirement Specification - Power Range : 2.2 Kw - 11.2 Kw (3.0 HP - 15.0 HP) - Version : Three Phase, 380-415V, 50Hz AC Supply - Speed : 2880 RPM - Maximum Total Head : 65 Mtr. - Maximum Flow Rate : 1450 LPM - Maximum Suction Lift : 7 Mtr. - Degree of Protection : IP 44 - Class of Insulation : B0 - Maximum Ambient Tem. : 40 C - Sealing : Stuffing Box - Type of Duty : S1 (Continuous) - Direction of Rotation : Three Phase, Electrically Reversible - Nominal Pumpset Size (Suction X Delivery in inch) : 50 X 40, 50 X 50, 65 X 50, 80 X 65, 80 X 80 100 X 80 and 100 X 100 (All size in mm) Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 1.75 x 10 mÃ?/sec (max.) - Ph Value : 6.5 to 8.5 Material of construction - motor Part Name Material Gland Dori : Graphite String Motor Shaft : EN-19 with SS SLEEVE Motor Body : FG-250 Bearing : SKF End Cover : FG-250 Bracket : FG-250 Flange : FG-250 Casing : FG-250 Impeller : FG-250 Cooling Fan : Aluminium