(ISO 9001 approved factory!) 60-99.7 alumina ceramic insulation tube (different size and length available) Professional manufacturer of ceramic tube here for about 10 years, has exported to About 30 countries, good reputation has gotten, welcome to contact me for further info. 1.Thermocouple protection alumina ceramic tube are made of al203 , and alumina Content from 60-99.7%, length can do according to your demand. Od from 6-32mm, id from 4-30mm. 2.Alumina ceramic furnace tube, both end open, white, creamy, pink color.Od 8-110mm, Length can do as your requirement. 3.Alumina ceramic insulation tube , .2 or 4 holes, size do as your request. Hot selling kinds Are in stock. Polyfoam filled , wooden case outside
NBR-PVC based material 2m length or 1.83m length Packing: carton box MOQ: 264 ctns ( 1 container 40ft) Production time: within 14 working days Category: Class 1
Kohs Ceramics, which is a professional manufacturer of advanced ceramics with 19 years of R&D experience.we can custom various textile ceramics,alumina ceramic tubes,crucible and so on.If you are interested
Key Specifications/Special Features: Multifunction For industrial thermal insulation and sporting equipment How to use: It is slipped over the pipes or tubing before pipe connections are made The fitting cover is fabricated properly from the miter-cut pieces Fitting cover is snapped over the fitting then bond with adhesive When piping is in place, a sharp knife is used to slit WP71 pipe insulation longitudinally and the insulation is snapped over the pipe The slit surface is brushed with an adhesive After drying, the joint is firmly pressed together Tee is fabricated from miter cut or free hand cut and the 45-degree cut are bonded by adhesive Available WP71 pipe size in (ID): 3/8, 1/2, 5/8, 3/4, 7/8, 1-1/8, 1-3/8, 1-5/8, 2-1/8, 2-5/8, 3-1/8 inches Available pipe size (IPS): 1, 3/4, 1/1/2, 2, 2-1/2 inches
Benefits - easy and quick to install - save time and money on installation - no seams that allow moisture to flow in and water to drip - easy to transport Reaction to fire classification : d-s3-d0 This classification has been carried out in accordance with en 13501-1:2007
It is made by adding insulated pipe and copper pipe together with nuts. It can be used for the outdoor linkage pipes of split type air conditioners. Our factory has the advanced machines which meet the international standards.
Insulated copper tube is for air conditioner installation. The copper tube inside of insulation is compatible for r410a, r407c, r404a, r507 and r22 refrigerants. The copper tube are produced according to astm b280 standard, en 12735-1 standard, as 1571 standard. The outer insulation tube is three layered structure and made of cross linked pe foam with closed cells. Insulation tubes are covered with embossed pe film to prevent the foam creasing. Our insulated copper tube is with rohs certificate, ce certificate and produced in iso 9001 management system. The types of insulated copper tube are twin insulated copper tube, single insulated copper tube. Advantage: 1. Rohs certificate, ce certificate and iso 9001 management system assure superior quality 2. Professional copper tube manufacturer, fast production and delivery 3. 12 years copper tube manufacturing experience, meticulous care on every order 4. Pe insulation tube is environmental, anti-uv, with excellent heat resistance, lower water absorption 5. Company standard copper tube especially for r410a refrigerant Specifications: 1. Alloy: c12200, cu-dhp, 2. Size range: Coc Carton.
Api vacuum insulated tubing Skype: julia0402zcy wechat: juliazcy Product name: pre-stressed vacuum insulated tubing/casing Product explanation: 1. Reduces the heat loss, ensures the steam quality being injected into the oil formation as well as the depth of steam injection can be increased. 2. Minimizes heat stress on well casing and cement mantle, protect the casing from damage by high temperature. 3. During oil production it will provide superior insulation and greatly reduce the loss of heat energy Product features: 1. The pre-stress will compensate the tubing expansion caused by temperature difference between the inner and the outer tubes so as to ensure reliable operation under high temp. 2. Gas absorbing materials are packed inside the annulus to clean up harmful gases and maintain good insulating property whilst in service.
Product Description Aeroflex closed cell tube and Sheet Insulation is a flexible, closed cell and lightweight elastomeric material designed for insulating liquid cooling and heating lines. The closed cell structure of Aeroflex provides many advantages over most rigid insulations for cooling and heating lines, such as: A: Moisture & vapor resistance without using additional vapor barriers. B: Stable thermal conductivity (K. value) during service, due to its dense surface skins and closed cell characteristics. C: Outstanding ultraviolet and weather resistance. Aeroflex is an ideal insulation for frost control on cold water plumbing. It prevents heat gain and condensation problems on chilled water and refrigerant pipelines, and it also prevents heat loss from hot water plumbing, liquid and dual temperature piping. Product Feature: Aeroflex tubes and sheets insulate and prevent condensation when used in operating temperatures down to -57C(-70F) and insulate against heat loss up to125C (257F). Within these recommended operating temperatures, it will not affect the thermal efficiency and water vapor permeability of Aeroflex. The Closed Cell structure protects against moisture, and eliminates the need for a vapor barrier in most applications. However, under severe condition of high humidity (90% RH up), high temperature (32¡æ up) and low ventilation such as underground piping, AEROCOAT(Acrylic Emulsion Paint) is recommended for use as additional vapor barrier coating. Aeroflex insulation, made from high quality synthetic elastomers, has low density and closed cell structure. The products, therefore, have a stable low K Factor of 0.25-0.27 (at 50-90F mean temperature) which can save energy consumption on any heating and cooling lines. Aeroflex tube and sheet insulation have been specially compounded to meet the ASTM Standard No. D 635, UL-94 V, JIS Standard No. K 6911 and other standards. The products have low smoke density while burning, and unlike other thermoplastic materials, Aeroflex will not melt nor drip flaming balls; therefore, it will not cause flame transfer. The high elasticity of Aeroflex insulation minimize the vibrations and resonance of chilled water and hot water pipelines during operation. The flexibility and smooth surface of Aeroflex offer neat-finished appearance even at joints, tees, elbows and crosses. No decorative or protective coating is required for both indoor and outdoor installations. The flexibility of Aeroflex enables quick and easy installation bent or irregular piping. Due to its low and stable thermal conductivity, Aeroflex requires a thinner wall than other rigid insulations. Therefore, lesser space is needed for installation of Aerofle. Application: Aeroflex is an ideal insulation for frost control on cold water plumbing. It prevents heat gain and condensation problems on chilled water and refrigerant pipelines, and it also prevents heat loss from hot water plumbing, liquid and dual temperature piping.
Phenolic Paper-base Laminated Tube PFCP22A(IEC) Class E Phenolic Cloth-base Laminated Tube PFCC21A/24A Class E Epoxy Laminated Glass Cloth Tube EPGC21/22 Class B/F Silicone Laminated Glass Tube SIGC21 Class H Bismaleimide Laminated Glass Cloth Tube BMIGC21 Class H Epoxy Glass Fiber Winding Tube EPCF52 Class H Modified Diphenyl Ether Laminated Glass Cloth Tube Class H Polyester Imide Laminated Glass Cloth Tube Class H Non-circular Tube (square tube, oval tube) Description: 3520(é??é??å±?å??纸管) This product has good mechanical and electrical properties. It can be used for motor and electrical equipment and also can be used in transformer oil. 380/380A (é??é??æ£?å¸?å±?å??管) The product has higher radial tensile strength. It can be used as support structure and wear-resistance parts of seals or bears. EPGC21/22ã??355ã??356ã??SIGC21ã??BMIGC21 With good dielectric property and machinability, the product can be used as components of insulation structural of electrical equipment, and can also be made into coil insulation tube and insulation end coil of dry-type transformer. Epoxy Glass Fiber Winding Tube 360 EPCF52 Description: This product adopts fiber glass yarn that is impregnated with insulation jelly made of epoxy resin and other resins by certain proportion, and then it is rolled in wet method, and dried and finally consolidated by baking. Its heat resistance level is up to Class H, and it also has excellent electrical and mechanical properties, chemical resistance (SF6), low dielectrical loss, no deformation or delamination. It can be used as main insulator on H grade dry-type transformer, load tap changer, electricâ??reactor, lightning arrestor, SF6 inductor, etc. 5. Non-circular Tube (square tube, oval tube) Class F/H Description: Non-circular tube is made of high temperature resistant resin and fiber glass cloth or yarn that are rolled in the wet method, and then dried and finally consolidated by baking. It has excellent mechanical, dielectric and mechanical properties. It can be used as components of insulating structure of electrical equipment, and can be also used in transformer oil and in wet environment. It is suitable for transformer, reactor, etc.
Product description Alumina ceramic tubes are widely used in various industrial furnace for supporting, threading and insulation etc.They are recommended for use in mass spectrometers and other vacuum sustems as feed through lines, thermocouple insulators, and in other applications requiring electrical and thermal insulators. Product feature Excellent thermalstability Insulation Temperature resistance Etc.Properties Product specification/models Standard dimension Ceramic tubes can be in single hole, double, three and four holes. The size of the ceramic tube's outer diameter range from 0.8mm-14mm. The ceramic tubes can be supplied in longer lengths(up to 2500 mm long).We can also custom cut shorter lengths to your specifications. The ceramic tubes can be triangular tube, square tube, other types, etc. Application Alumina ceramic tubes are used in b-type, s-type and tungsten-rhenium thermocouple sleeves. Other information In addition, timely delivery, stocks and product information are available. Should you have any questions, pls do not hesitate to contact me. Free samples will be sent for your evaluation! Note:if we have available stocks for your sizes, free samples can be sent to you but you bear the freight. If your sample is custom-made, you should pay for both the sample fee and freight.
Major client : Vehicle, Electric/Electronic company The product line : 1) PE/PU/PP Foam insulation tube type (Max : Internal diameter 200A) 2) PE/PU/PP Foam + Plastic film/Aluminum foil film molding laminating : Tube or Sheet type OK. 3) PE/PU/PP Foam + Bonding : Adhesion type laminating : Tube or Sheet type OK. 4) PE/PU/PP Foam Sheet type Usage : 1) Air-conditioner, Refrigerator's cold insulation 2) Vehicle's NVH 3) Cold/Hot insulation material
Aeroflex 2m length
Insulating rods & tubes(also known as: phenolic cotton cloth laminated rod, phenolic cotton cloth molded rod, epoxy glass cloth molded rod, epoxy glass cloth tube) Used in a variety of insulating applications. 1) grade: 3721 /3725 /g10/ g11/fr4/fr5 2) color: natural green(for epoxy rods/tubes); Brown (for phenolic rods/tubes) 3) length: 1000mm or customize 4) diameter: as customers¡¯ requirement. 5) minimum order: 500 kgs in a lot 6) packing: 500~1, 000kgs/pallet or as required We have the ability to machine electrical insulation laminates into many customize sizes and shapes according to drawings or samples. Packaging detail: 500-1000kgs per pallet or as required
Glazing glass is a combination of two or more pieces of glass spaced apart with a spacer bar and hermetically sealed with a primary and secondary sealant to form a single unit with one or more air spaces between each other. Max size :3300*12000mm Main character : Energy saving , improving the thermal performance Sound insulated Security and comfort Component : 1.� Glass items:� consists of hard or soft low E glass ,reflective glass ,clear glass ,tinted glass, with types of flat tempered ,bent ,laminated processing ,according to the application 2.� Spacer bar :is the material used to separate the two glass lites in an IGU. It can be made by aluminum,stainless steel,hybrid ,plastic material . The spacer width usually from 6mm-18mm.
East Jin International Co., Ltd manufactures pair coil, also known as insulated copper tube, for various use. It is commonly used for installation and maintenance of centralized air conditioning system which needs UV protection, heat and moisture resistance. Complied standard for inserted copper tube is available for ASTM B280, JIS H3300, KSD 5301 and AS1432.
The PVC sleeve is a flexible, non shrinkable casing. Good electrical and physical properties. Widely used in electronic components, household appliances, automobiles, stationery and other fields. 105 degree ULPVC material The working temperature is from -15 to 105 centigrade Rated voltage 300V, 600V Flame retardant UL224VW good insulation performance Good softness Oil resistant and acid resistant Protective machine hanging wire and lead
The pvc sleeve is a flexible, non shrinkable casing. Good electrical and physical properties. Widely used in electronic components, household appliances, automobiles, stationery and other fields. 105 degree ulpvc material The working temperature is from -15 to 105 centigrade Rated voltage 300v, 600v Flame retardant ul224vw good insulation performance Good softness Oil resistant and acid resistant Protective machine hanging wire and lead