Al Miqat Hardware Established in the year 2005, Al Miqat Hardware is professionally engaged in supply of wire mesh products and has more than 15 years of experience. Al Miqat is a leading Importer, Exporter and Stockiest of a wide range of wire mesh products in Galvanized, PVC Coated and Stainless Steel materials in both welded and woven forms. Under the leadership and vision of its Managing Partner, Mr. Hashim Sherawala, today the company has grown in folds and provides adequate in-time Wire Mesh solutions to thousands of B2B and B2C customers spread across the GCC and the Africa each year. Hexagonal wire netting is mostly used as light fencing for poultry, farms, for birds, rabbits and pet enclosures, tree guards and garden fencing, storage bins etc. It is also used as wire mesh fabrics for light reinforcement in splinter proof glass and cement concrete, plastering and laying of roads, etc. This type of wire mesh can be manufactured in 2 techniques â?? Straight Twist and Reverse Twist. Also a variety of materials are available to produce this mesh Galvanized, PVC Coated, Hot Dipped Galvanized and Stainless Steel
Used And Brand New Equipment Such As Excavators, Dump Trucks, Cranes, Dozers Etc. Truck & Equipment Spare Parts, Spare Parts For Trucks And Heavy Equipment, Marine And Industrial Engine Assy. Auto Ac Parts & Auto Lamps, Batteries Tyres , Safety Products And Ppe Items Safety Glasses, Goggles, Face Shields Safety Boots, Steel Toed Shoes Reflective Vests, Jackets, Heat Resistant Gloves, Marine Spare Parts, Marine Spre Parts. Iveco, Scania, Renault, Isuzu, Nissan Ud, Tata, Leyland, Komatsu, Tadano, Doosan, Hyundai, Volvo Parts..
Sodium chlorate is an inorganic compound with the chemical formula NaClO3. It is a white crystalline powder that is readily soluble in water. It is hygroscopic. It decomposes above 300 C to release oxygen and leaves sodium chloride. Several hundred million tons are produced annually, mainly for applications in bleaching pulp to produce high brightness paper. The main commercial use for sodium chlorate is for making chlorine dioxide (ClO2). The largest application of ClO2, which accounts for about 95% of the use of chlorate, is in bleaching of pulp. All other, less important chlorates are derived from sodium chlorate, usually by salt metathesis with the corresponding chloride. All perchlorate compounds are produced industrially by the oxidation of solutions of sodium chlorate by electrolysis.
ABS Regrind/Flakes of FR/ NON-FR Batteries BOXES
One of the most well-known and sought-after byproducts of the refining process of vegetable (mostly sunflower) oil are fatty acids. Fatty acids, an industrial product with a GMP+ certification, are mostly used in the animal formula and feed sector. This is because adding fatty acids or fatty acid-based compounds to an animal feed ration can reduce feed costs. Fatty acids are crushed and processed through a whole cycle. In addition, they are utilized in the manufacturing of soap, glycerin, and stearin, as well as in the food processing industry as a direct formula component. Tocopherols.
1. What is PFAD PFAD stands for Palm Fatty Acid Distillate. It is a processing residue resulting from physical refining of crude palm oil products. At room temperature it is a light brow semi-solid, melting to a brown liquid on heating. Up to 80 percent of PFAD is free fatty acid (FFA), with palmitic acid and oleic acid being the major components. The remaining 20 percent is made up of components including triglycerides, partial glycerides, and vitamin E, sterols and squalene's. 2.How is PFAD used? PFAD is used as a renewable raw material in biofuels production as well as to produce candles, soaps, other oleochemical products, and animal feed. Specific to biofuel production in Europe, the EU allows Member States to account PFAD consumption towards greenhouse gas emissions reductions under its Renewable Energy Directive. The amount of emissions reductions depends on the PFAD technical classification, a residue or co-product, which is up to the individual Member State. To verify the emissions reductions, the EU relies on voluntary certification schemes, such as the International Sustainability and Carbon Certification system. 3.What are the benefits6 of using PFAD Producing renewable fuels using PFAD is good for the climate. It is an efficient way to use waste generated through the palm oil refining process, preventing PFAD from going to literal waste. A by-product that is undesirable from the food industry perspective can be very desirable for other sectors. Neste MY Renewable Diesel7 which is refined from PFAD and other waste and residue materials, such as Used Cooking Oil (UCO), helps to replace crude oil-based diesel in transportation. Using Neste MY Renewable Diesel can reduce greenhouse gas emissions by 90 percent on average compared to a diesel-powered vehicle using conventional fossil fuel-based diesel.
Truck Parts IVECO VOLVO RENAULT SCANIA MITSUBISHI UD ISUZU MAN
Bearings FAG FYH KOYO NSK NTN SKF TEKO
New cars.New cars
Lead, Zinc Ore from Nigeria
PET FLAKES The Recycling PET (Polyethylene Terephthalate) Flake is obtained from post-consumption of Recycling PET Plastics Bottles recycling. Strong material with light weight. The flake is processed by blowing, injection, and extrusion. SPECIFICATION: GRADE AA PVC CONTENT: 0.005% (50ppm) OTHER IMPURITY: 0.01% (100ppm) GLUE RESIDUE/GLUE: 0.02% (200ppm) GRADE A: PVC CONTENT:0.01% (100ppm) OTHER IMPURITY: 0.02% (200ppm) GLUE RESIDUE/GLUE:0.02% (200ppm) COLOR: CLEAR / NATURAL PURPOSE: For the raw material in many industries : Recycled PSF/Fiber, Strapping Band, Sheet, Bottle PACKAGING Jumbo bag LOADING 20 ton/40" container PRODUCTION CAPACITY 500 metric ton per month
Advantages: It is uniformly depressed anti-adhesive, with excellent film-forming properties; Polymerization of continuous device production makes the quality high and stable. Application: It can be used in films with special requirements for optical and surface properties or ultra- films below 81/4m (micrometer ). It can be used directly in the food packing materials after FDA approval.
For the production of thin film and solar cell encapsulation substrates with high strength requirement The solar polyester film can protect the solar panel.
Spodumene, lithium ore, lithium concentrate content Li2O 5-8% or more Long-term supply of spodumene ore and lithium concentrate, with different contents of 5%, 6%, and 7% or more can be supplied. It can supply about 1000-2000 tons per month. Interested ceramic glass factories or traders are welcome to contact us. Li2O: 6.00%, Al2O3: 25.56%, SiO2: 63.72%, Fe2O3: 0.26% CaO: 0.17%
The main raw material of PTA and MEG is added with modifiers of third monomer and fourth monomer, etc., then subjected to copolymerization reaction to make modified polyester pellet with melting point at 100'C - 225C. Functional characteristics low melting point, good spinnability and excellent fiber adhesion effect Application scope manufacturing bi-component core-sheath fiber and filament yarns, etc. Specification - LOW MELTING PET CHIPS TRB FIBER GRADE 110-225.
The polyester staple fiber machine (PSF plant) takes virgin PET Chips, recycled Bottle Flakes, Popcorn and Lumps, etc., as raw material, with continuous drying (or batch drying through Vacuum Dryer), high pressure melt spinning process engineering and VFD controlled Spinning & Stretching process engineering to produce normal Staple Fibre, High Tenacity Low Elongation Staple Fibre and Hollow Fibre. Single plant capacity is 15T.P.D. to 80T.P.D. Equipment Technical Data Titer Range dtex 6.67-16.67 Spinning Pos. nos. 6-24 Spinning Pitch mm 700, 750 Plant Capacity TPD 15-80 Spinneret dia. mm 328, 358, 410 Spinning Mechanical Speed m/min 500-1,500 Spinning Processing Speed m/min 500-1,300 Stretching Mechanical Speed m/min 240 Stretching Processing Speed m/min 230 Total Tow Titer at Stretching dtex 600,000-3,000,000 Stuffer Box Width mm 160-410 Cutting Length mm 25, 32, 38, 44, 51, 64, 76, 101 Bale Weight kg 200-350 Application: Cushions Pillows Quilts Toys Jacket Mattress Non woven carpet Automotive felts, speaker felts, geo textiles, polyfill wadding, filter fabrics and other acoustics as well. Spinning Line: Continuous Dryer Hopper Screw Extruder Polymer Pipe Filter Spin Beam (Meter Pump System, Spin Pack, Spinneret) Quenching Unit Interfloor Duct Draw-off Wall Capstan Roller Sunflower Gearing Unit Automatic Fiber Can Device Drawing line: Can Creel Inlet Thread Guide Tow Guide Stand Dipping Bath 1st Draw Stand Draw Bath 2nd Draw Stand Draw Steam Chest 3rd Draw Stand Tow Stacker Crimper Steam Box Crimper Silicone Oil Sprayer Machine Tow Tension Stand Cutter Fiber Spreading Machine Relaxer Fiber Blowing system Baling Press
PET FLAKES The Recycling PET (Polyethylene Terephthalate) Flake is obtained from post-consumption of Recycling PET Plastics Bottles recycling. Strong material with light weight. The flake is processed by blowing, injection, and extrusion. SPECIFICATION: GRADE AA (B to B flakes) PVC CONTENT: less 0.005% (50ppm) OTHER IMPURITY: less 0.01% (100ppm) GLUE RESIDUE/GLUE: less 0.02% (200ppm) GRADE A: (Sheet or Filament Grade) PVC CONTENT: less 0.01% (100ppm) OTHER IMPURITY: less 0.02% (200ppm) GLUE RESIDUE/GLUE: less 0.02% (200ppm) COLOR: CLEAR / NATURAL PURPOSE: For the raw material in many industries : Recycled PSF/Fiber, Strapping Band, Sheet, Bottle PACKAGING Jumbo bag LOADING 20 ton/40" container PRODUCTION CAPACITY 500 metric ton per month
What is PET Open Agent Film Chips? PET Open Agent Film Chips are plastic chips made of polyethylene terephthalate (PET) that contain an open agent, which helps to improve the adhesion of inks and coatings to the surface of the film. It is uniformly depressed anti-adhesive, with excellent film-forming properties; polymerization of continuous device production makes the quality high and stable. As an opening agent to be used with film grade base materials to produce various types of films. It can be used in films with special requirement for optical and surface properties or ultra-films below 8u. Can be used directly in foodstuffs after FDA approval.
What is PET Open Agent Film Chips? PET Open Agent Film Chips are plastic chips made of polyethylene terephthalate (PET) that contain an open agent, which helps to improve the adhesion of inks and coatings to the surface of the film. It is uniformly depressed anti-adhesive, with excellent film-forming properties; polymerization of continuous device production makes the quality high and stable. As an opening agent to be used with film grade base materials to produce various types of films. It can be used in films with special requirement for optical and surface properties or ultra-films below 8u. Can be used directly in foodstuffs after FDA approval.
This type Chips that is designed to resist burning and melting at low temperatures. Low Melting Point Polyester Chip for Hot Melt Yarn Masterbatch Extrusion Grade Polymer for Hot-melt Adhesive Glue Coating Description: Generally speaking, the low melting point polyester chip refers to one specialty polymer with a melting point between 90 and 220. The melting point of polyester is the temperature at which a solid crystalline substance changes from a solid state to a liquid. So it reflects the purity of polyester. Generally speaking, pure polyester is a partially crystalline polymer with a melting point of 265. But during actual production, some impurities exist in the polyester due to various side reactions. At the same time, the defects of polymer crystals and the difference in crystallinity will also affect the melting point. The common type of low melt polymer is 110. But we can also offer a melting point of 90, 120, 160, and 180. Application: Low-melt polyester chips can produce low-melting point fiber, low-melting point synthetic fiber, and thermal-melting mucilage. Its primary usage is acting as bonding fiber in nonwoven fabrics. The end usage lies in clothing, articles for bed, shoe uppers, sleeping bags, sofas, and hygiene products. LM PET Chip is also the main raw material of masterbatch carriers. That is, low-melt PET chips, conventional chips, and dyes are mixed to produce the polyester color masterbatch according to a certain proportion. The production of this product is the introduction of polyester macromolecules into the modified copolymer unit. And its melting point is in the range of 100-120. Commonly used modifiers are phthalic acid, adipic acid, and trimethylolpropane. Recently, LM Polymer is also extruded into the back coating of nonwoven, automotive interiors, foam, injection molding, PET sheets, and hot-melt adhesive/glue. Low Melt Yarn is also called hot melt yarn or fusible yarn. There are sheath-core low-melt bicomponent yarn and full low-melt polyester yarn.
