I C U Bed (Mechanical Abspr) Suppliers and Manufacturers

AINiCo is composed primarily of Aluminum Nickel Cobalt and also Copper and Titanium. They are manufactured through either casting or sintering process. Cast AINiCo may be manufactured in complex shapes such as horseshoes not possible with other magnet materials. Sintered AINiCo offer slightly lower magnetic properties but better mechanical characteristics. it can be efficiently magnetized in any direction, and for anisotropic AINiComagnet, it generally has greater magnetic capacitive in a preferred orientation than isotropic types. AINiCo is hard and brittle, Machining or drilling cannot therefore be accomplished by ordinary methods. Holes are usually cored in at the foundry, and magnets are cast close to final size and then finish machined to closer tolerances. â?¢ Advantages of AlNiCo Magnet: 1.Customized designs are available. 2.Max working temperature can be as high as 550�°C. 3.Disadvantage: Br and BH(max)are not as high as rare earth magnet. 4.High energies and relatively low coercivity. 5.High magnetic flux density; low mold charge stable temperature properties; easy to shap.

Commodity: Sodium Hydrosulfite Other name: Synonyms: Sodium Hydrosulphite; Sodium Dithionite; Dithionous acid, Disodium salt; Sodium Sulfoxylate CAS No.: 7775-14-6 Molecular Weight: 174.10 Chemical Formula: Na2S2O4 Product Description Appearance: White, crystalline powder. Product Feature Odor: Slight irritative. Specific Gravity: Unavailable Solubility: Soluble in water. Density: 2.19 pH: 6-7 pH Test-Method: PH test paper. % Volatiles by volume @ 21C (70F): 0 Boiling Point: Not applicable. Melting Point: >300 C Decomposes. Vapor Pressure (mm Hg): No information found. Bulk Density: ~0.9 Evaporation Rate (BuAc=1): No information found. Application 1. Widely used in textile industry for vat dyeing, reduction cleaning, printing and stripping, textile textile bleaching . 2. bleaching paper pulps , especially mechanical pulps, its the most fittable bleaching agent in pulps. 3. bleaching kaolin clay, fur bleaching and reductive whitening, bleaching of bamboo products and straw products, 4. in mineral, the compound of thiourea and other sulphides. 5. as reducing agent in chemical industry. 6. Sodium hydrosulfite food additive grade is used in foodstuffs, as bleaching agent and preservative dried fruits, dried vegetable, vermicelli, glucose, sugar, rock sugar, caramel, candy, liquid glucose, bamboo shoots, mushrooms and canned mushrooms. Packaging 50kg/100kg net in iron drums with double PVC bags Product Specification/Models NDEX 90%, 88%, 85%. FOOD ADDITIVE Na2S2O4, 90%, 88%, 85%, Fe 20ppm ZincZnOther heavy metal calculated as Pb, 1ppm Water Insolubles05% Shelf Life(month)12

Commodity: Rattan Baby Crib Quantity: 20 pieces. Specification: as per enclosed specification. Size: L80xW50xH60cm Main Function: Doll Bed, Interior Decor Price: Negotiate Packing: Carton box Delivery time: 27-35 days Payment: T/T, L/C, Western union, Xoom or Wise

We supply the Quality Ferro Alloys Like Silico Manganese HC Grade I II Mn 60% min 65% Min Si 14% Min 15% Min / 16% Min C 2.50% Max 2% Max S 0.03% Max 0.03% Max P 0.30% Max 0.30% Max Silicon Manganese Size : 10 - 60 mm Mn; 65 to 70% Si : 16 %c : 2 % P : 0.15 % S : 0.01 % High Carbon Silico Manganese - Standard Grades Mn : 60% Min. / 65% Min. / 70% Min. Si : 15% Min. / 16% Min. / 17% Min. C : 2 % Max. P : 0.30 % Max. S : 0.03 % Max. Size: 10 - 60 mm

Natural Water Hyacinth Bag came from a kind of free-floating aquatic plant which has beautiful purple violet flower, commonly known as name Water Hyacinth. If you have ever been travel in the Mekong Delta River once before, you probably saw a lovely picture of a long river filled up by beautiful green and purple color from this plant. I personally just love this look very much. Origin: Vietnam Material: Water Hyacinth Feature: Eco-Friendly, No chemical Size: 40*24*12CM Color: Natural Light brown. Delivery time: About 40-50 workdays after receiving the deposit. Payment: T/T, L/C Sample Time: About 7-10 days. Shipment:By Air,bySea,by Express (DHL, UPS, Fed Ex)

Natural Water Hyacinth Bag came from a kind of free-floating aquatic plant which has beautiful purple violet flower, commonly known as name Water Hyacinth. If you have ever been travel in the Mekong Delta River once before, you probably saw a lovely picture of a long river filled up by beautiful green and purple color from this plant. I personally just love this look very much. Origin: Vietnam Material: Water Hyacinth Feature: Eco-Friendly, No chemical Size: 40*24*12CM Color: Natural Light brown. Delivery time: About 40-50 workdays after receiving the deposit. Payment: T/T, L/C Sample Time: About 7-10 days. Shipment:By Air,bySea,by Express (DHL, UPS, Fed Ex)

Product name: Coconut Peat Brand name: 99 Gold Data Block size: 30 x 30 x 15 cm Weight: 5 kgs (+/- 3%) pH: 5.8 to 6.8 Compression Ratio: Over 75 Liters / Block Moisture: 15 â?? 20% max Electric Conductivity (E.C): o High EC (Animal Bedding): 3.5 - 5 mS/cm. o Low EC (For Plant Growth) < 0.5 mS/cm. Impurities/sand: 3% max Fiber length: Less than 2cm Price: Negotiation Packing: In PP bag 20kgs, or 5kg/block, 192 blocks/pallet, 24 pallets/40ft (23 MTs) Payment method: T/T 40 in advance, 60% on scan bill, L/C at sight 100% Delivery time: 10 - 20 days

We supply the Quality Ferro Alloys Like Ferro Manganese HC / MC / LC Grade I II III Mn 65% min 70% Min 75% Min Si 2% Max 2% Max 1.50% Max C 8% Max 8% Max 8% Max S 0.05% Max 0.035% Max 0.03% Max P 0.40% Max 0.30% Max 0.25% Max MC FeMn Mn 70%Min /75% Min / 78% Min Si 1.50% Max C 1.50% MAX S 0.03% Max P 0.25% Max Ferro-Manganese Ferro-Manganese is an alloy with high percentage of Manganese, which is made by heating a mixture of the oxides MnO2 and Fe2O3 and coal & coke with high carbon content in a blast furnace or an electric arc furnace-type system. The oxides go through carbothermal reduction in the furnaces that result in producing the Ferro-Manganese. Ferro-Manganese is used in the production of steel which acts as an excellent deoxidizer and desulfurizer. We supply the one variant of Ferro Manganese: High Carbon Ferro-Manganese.

TTT procedure: EN590 10pm price $460/MT, Jet fuel A1 price $76/BBL (1) FREE ON-BOARD TRANSACTION PROCEDURE - (TANK TO TANK). Rotterdam, Houston, Fujairah, Jurong, Ningbo-Zhoushan 1. Buyer issues an official ICPO with the seller's procedure, passport copy, banking details along with their Tank Storage Agreement "TSA". 2. Seller issues their Commercial Invoice "CI" to the buyer, Buyer signs and returns the commercial invoice to the seller along with an Acceptance Letter of the sales and purchase procedure. 3. Seller verifies the buyer's storage facility and their Tank Storage Agreement (TSA) with the port authority. (NB: Seller will issue a Tank-to-Tank Injection Agreement (TTIA) to be signed by all parties only if buyer's TSA is engaged, not active or cannot be verified with the local port authority). 4. Seller issues all POP documents below to the buyer upon a successful verification and approval of the buyer TSA or after receiving the TTIA fully signed by all parties: a. Injection Report. b. Product Passport. c. 24 Hours SGS Report. d. Product Certificate of Origin. e. Tank Storage Receipt (TSR). f. Authorization to sell and collect. g. Unconditional Dip-Test Authorization. h. Product Title Holder Transfer Agreement. i. NCNDA/IMFPA. 5. If required buyer may inspect by SGS (Dip Test In Tanks) at buyer's expense. 6. Upon successful verification of POP or Dip Test in the seller's tank, buyer provides Tank Storage Receipt (TSR) to seller in order to issue the scheduled Injection Programming (IP) to be signed by buyer storage facility and then injects the product into buyer's tanks. 7. Buyer makes the payment for the product via MT103, seller transfers the Title Holder & Ownership of the product to the Buyer. 8. After successful Trial Lift (First Lift), Seller issues SPA/Contract for 12 months with R&E to Buyer for processing. 9. Seller pays commissions to all intermediaries involved, for the initial lift and all subsequent lifts according to the signed NCNDA/IMFPA.

**Ready stock in Turkey** -Price: USD11,000/CIF by air *without compressor -Price: USD12,000/CIF by air *with compressor -Operation Features- Inspiration Pressure: 2-100 mBar Inspiration Duration: 0.1-10 Sec. Peep Pressure: 0-50 mBar Breathe Speed: (c) 1-150/mins. (y) 1-100/mins. Flow: (c) 1-60 lt/mins. (y) 2-120 lt/mins. O2 Mixture: 21-100% Spontaneous Pressure Support: 0-100 mBar I/E Rate: 1:10 (x60*)-10:1 (c): Child, (y): Adult

PRODUCT DATA SHEET ACID RESISTANT BRICK Material : FIRECLAY Type Acid Resistant Brick Size (mm) : 230 (LENGTH) X 115 (WIDTH) X 100,76,65,50,40,38,30,25 (THICK) Specification : ASTM C279, ASTM C410, IS 4860-1982 DESCRIPTION : * We offer premium quality acid resistant bricks Red â?? Shale , tiles and special shapes. We also offer customized sizes as per clients' requirements. Our acid bricks comply with ASTM C279 Type-III, ASTM C410 Type H, L, and Indian Standard 4860 - 1982 Class-I for all applications where low absorption and high acid resistance is required. FEATURES OF ACID RESISTANT BRICK: * Excellent resistant against wide range of chemicals except hydrofluoric acid, high abrasion resistance, low wearing properties, High Thermal resistant to sudden change in temperature AREA OF APPLICATION: Chemical Analysis (Average) Acid and Alkali Storage Tank Farms Demineralization plants and Water treatment plants Chimney inside lining, FGD linings Towers and Columns Process Vessels and Tanks Sewerage Treatment Plants and Lines Industrial Flooring and Bund Areas Chimney and Flue Gas Linings Hoppers and Chutes SiO266.4 Al2 0324 TiO21.1 Fe2 O31.1 K2 O + Na2 O2.5 NOT RECOMMENDED: HF acid or other fluoride solutions - Heavy thermal shock Characteristic Fireclay Type Acid Resistant Brick - Test Standard Bulk Density, lbs/ft3 - 2.25 to 2.30 ASTM C-20 Water Absorption, % - 0.1 to 1.8 ASTM C-20 Apparent Porosity, % - 4.05 to 4.14 ASTM C-20 Acid Solubility (H2SO4), Loss in Mass,% - 6.1 to 6.8 ASTM C-279 Modulus of Rupture, Mpa - 14.6 ASTM C-67 Compressive Strength, PSI - 15500 to 17250 ASTM C-67 Abrasion Resistant , Volume in mm3 - 71 to 96 EN 102 Surface Hardness, MOHS Scale - 7 Thermal Conductivity, BTU-in/hr-ft-F - 6.94 to 7.12 ASTM C-236 Thermal Expansion Coefficient,in/in/Fx10-6 - 2.6 to 2.8 EN 103

PRODUCT DATA SHEET ACID RESISTANT BRICK Material : RED SHALE Type Acid Resistant Brick Size (mm) 230 (LENGTH) X 115 (WIDTH) X 100,76,65,50,40,38,30,25 (THICK) Specification : ASTM C279, ASTM C410, IS 4860-1982 DESCRIPTION : We offer premium quality acid resistant bricks Red â?? Shale , tiles and special shapes. We also offer customized sizes as per clients' requirements. Our acid bricks comply with ASTM C279 Type-III, ASTM C410 Type H, L, and Indian Standard 4860 - 1982 Class-I for all applications where low absorption and high acid resistance is required. FEATURES OF ACID RESISTANT BRICK: Excellent resistant against wide range of chemicals except hydrofluoric acid, high abrasion resistance, low wearing properties, High Thermal resistant to sudden change in temperature AREA OF APPLICATION: Chemical Analysis (Average) Acid and Alkali Storage Tank Farms Demineralization plants and Water treatment plants Chimney inside lining, FGD linings Towers and Columns Process Vessels and Tanks Sewerage Treatment Plants and Lines Industrial Flooring and Bund Areas Chimney and Flue Gas Linings Hoppers and Chutes SiO266.4 Al2 0324 TiO21.1 Fe2 O31.1 K2 O + Na2 O2.5 NOT RECOMMENDED: HF acid or other fluoride solutions Heavy thermal shock Typical Physical Properties of GANESHAS Acid and Chemical Resistant Brick Characteristic RED SHALE ACID RESISTANT BRICK Test Standard Bulk Density, gm/cc - 2.3 to 2.35 ASTM C-20 -Water Absorption, % - 0.1 to 1.5 IS 4860-1968 Apparent Porosity, % -0.5 to 1.75 S 4860 Acid Solubility (H2SO4), Loss in Mass,% -0.1 to 1.8 ASTM C-279 Modulus of Rupture, PSI -2133 to 3555 ASTM C-67 Compressive Strength, Kg/cm2 - 700-900 IS 4860-1968 Abrasion Resistant , Volume in mm3 -69 to 85 EN 102 Surface Hardness, MOHS Scale - 7

- Free Fatty Acid(as palmtic) FFA : 0.1% max - Moisture & Impurities, M&I : 0.1% max - Iodine Value (Wijs Solution) : 56.0 min. - Cloud Point : 10 degree C max - Slip Melting Point : 24 degree C max. - Colour : 4 Red Max.

- Free Fatty Acid (as palmtic) FFA : 0.1% max. - Moisture & Impurities, M&I : 0.1% max. - Iodine Value (Wijs Solution) : 58.0 min. - Cloud Point : 8 degree C max. - Slip Melting Point : 24 degree C max. - Colour : 4 Red Max.

Features: a) Color: White or white Light Yellow b) Shape: loaf, slice c) Dry ginger sweet smell d) Spicy taste e) No molding f) Impurity: none g) Moisture: 14% h) Usage: grinded to powder i) Used as medicine (extract ), food flavoring

Features: a) Color: White or white Light Yellow b) Shape: loaf, slice c) Dry ginger sweet smell d) Spicy taste e) No molding f) Impurity: none g) Moisture: 14% h) Usage: grinded to powder i) Used as medicine (extract ), food flavoring

No additives 100% natural Size: 18-34 Processing : Raw Closed nuts: Maximum 5% Small nuts : Maximum 5% Deformed nuts : Maximum 2% Nuts of another sort: Maximum 6% Foreign objects : Maximum 1% Mechanical open : Not allowed Moisture content : Maximum 4,5% Mold : Not allowed Output kernel : At least 54% Partially disclosed nuts (by weight) : Maximum 10% kernels without shell : Maximum 1% Empty shells : Maximum 1% Grades of Pistachios AAA: ~95% whole + 5% split. AA: ~90% whole + 10% split. A: ~85% whole + 15% split. C: ~70% whole + 30% split.

No additives 100% natural Size: 18-34 Processing : Raw Closed nuts: Maximum 5% Small nuts : Maximum 5% Deformed nuts : Maximum 2% Nuts of another sort: Maximum 6% Foreign objects : Maximum 1% Mechanical open : Not allowed Moisture content : Maximum 4,5% Mold : Not allowed Output kernel : At least 54% Partially disclosed nuts (by weight) : Maximum 10% kernels without shell : Maximum 1% Empty shells : Maximum 1% Grades of Pistachios AAA: ~95% whole + 5% split. AA: ~90% whole + 10% split. A: ~85% whole + 15% split. C: ~70% whole + 30% split.

No additives 100% natural Size: 18-34 Processing : Raw Closed nuts: Maximum 5% Small nuts : Maximum 5% Deformed nuts : Maximum 2% Nuts of another sort: Maximum 6% Foreign objects : Maximum 1% Mechanical open : Not allowed Moisture content : Maximum 4,5% Mold : Not allowed Output kernel : At least 54% Partially disclosed nuts (by weight) : Maximum 10% kernels without shell : Maximum 1% Empty shells : Maximum 1% Grades of Pistachios AAA: ~95% whole + 5% split. AA: ~90% whole + 10% split. A: ~85% whole + 15% split. C: ~70% whole + 30% split.