Specially designed for tire Changer, adopt CMC manifold, support the operation of three sets double action cylinder. Unit Specification Center manifold: CMC Motor: 380V 1.5Kw 1420rpm 3 ph 50Hz Pump: 3.3cc/rev. Relief: 16 Mpa Oil ports: G1/4 Tank:8L Mounting: Horizontal Rpcv: non
Motor power 1.1kw/0.75 kw Operation pressure 8-10 bar Max.wheel dia 38úóú¿960 mmú¬ Rim clamping from outside 10úó-18úó Rim clamping from inside 12úó-21úó Bead-breaker force 2500 kg Noise ú+70 dB.
Semi penumetic & machenical tyre changer 1
Tyre changer Product code nht 860-gt Semi-automatic tyre changer Suitable for 12"-23"stiff, wide and low-profile tyres Capable of handling 20" aluminum alloy rims Air reserve tank in the pole Quick inflating Pneumatic bead breaker blade Manometer for inflation pressure control equipped with deflating push button Water box in the case Rim clamping from outside 12"-20" Rim clamping from inside 14"-23" Maximum wheel diameter 1000mm Maximum wheel width/turntable 410mm Maximum wheel width/bead breaker 360mm Bead-remover cylinder(force at 10 bar) 2500kg Operating pressure 8-10bar(145psi) Power supply 110v/60hz 220v/50hz(1ph) 380v/50hz(3ph) Motor power 0.75-1.1kw Net weight 213kg Noise
Tyremate 200 TL - RFT Suitable for Car and LCV tyres Pneumatically operated tilting type vertical column Pneumatically operated twin cylinders for firm clamping Four Jaw self centering chuck Alloy wheel plastic protector for jaws Capable of handling stiff, wide and low-profile tyre Right help arm
Tyre changer Product code nht 845-gt Semi-automatic tyre changer Suitable for 12"-23"stiff, wide and low-profile tyres Capable of handling 20" aluminum alloy rims Unit integrated case Complete with air reserve tank Quick inflating Pneumatic bead breaker blade Vertical and horizontal arms with pneumatic dual locking device Water box in the case Rim clamping from outside 12"-20" Rim clamping from inside 14"-23" Maximum wheel diameter 950mm Maximum wheel width/turntable 410mm Maximum wheel width/bead breaker 260mm Bead-remover cylinder(force at 10 bar) 2500kg Operating pressure 8-10bar(145psi) Power supply 110v/60hz 220v/50hz(1ph) 380v/50hz(3ph) Motor power 0.75-1.1kw Net weight 213kg Noise
Automatic tyre changer Automatic tyre changer for 10 û 22 ( inside locking 12 -22, outside locking 10 û 20) wheels complete with automatic lubricator, tyre lever, plastic protection for bead breaker blade 230/400v. 50hz three phase motor, with pneumatic tilting back vertical positions, with pneumaticly operated system which locks the mounting/demounting tool 3mm. Away from the rim edge, with inflating gun. Optional : tubeless tyres inflating device from slides with pedal control and air tank. Working pressure 8 û 12 bar Bead breaker force2500 kg. Working voltage380v three-phases Working voltage (optional)220v single-phase Motor power1, 1 kw- 1, 5 hp / 1500 rpm Weight235kg Width845mm Dept1030mm Height1950mm Plate height780mm Max. Wheel diameter1000mm Wheel width3 û 12 Width845mm Dept1030mm Height1950mm Plate height780mm Max. Wheel diameter1000mm Wheel width3 û 12
Motor cycle tyre changer Product code nht 810 Motor tyre changer Complete with pneumatic bead breaker blade Manometer for inflation pressure control equipped with deflating push button Water box in the case Rim clamping from outside 6"-21" Maximum wheel diameter 960mm Maximum wheel width/turntable 260mm Maximum wheel width/bead breaker 320mm Bead-remover cylinder(force at 10 bar) 2500kg Operating pressure 8-10bar(145psi) Power supply 110v/60hz 220v/50hz(1ph) 380v/50hz(3ph) Motor power 0.75-1.1kw Net weight 164kg Noise
Tilt back automatic tire changer 1)Rim size : 10"-24" 2) Max wheel width 420mm 3) Max wheel diameter :1150mm 4) Bead breaker force 2500kgs 5) Pressure : 0.8-1.2Mpa 6) Noise less than 70db 7) Power supply : 220V/380V 8) Packing : 880x970x760mm,225kgs,0.7cbm 880x970x760mm,225kgs,0.7cbm
Technical data automatic tyre changer Model Tc960rs Rim clamping from outside 10" to 24" Rim clamping from inside 13" to 26" Max. Wheel diameter00000000000000 1040mm Wheel width 3"-15" Operating pressure 8-10bar Motor power 0.75/1.1kw Noise level
Tire changer machine , auto tire equipment for garage Sincerely looking for distributor in different country, thanks for kind contacting ! Product overviews ModelTc960 Rim clamping from outside 10"-24" Rim clamping from inside13"-26" Max.Wheel diameter1040mm Wheel width3"-15" Operating pressure8-10bar Motor power0.75/1.1kw Noise levelLess than 75db Net weight260kgs Gross weight295kgs Packing dimension1100x860x1020mm Volume0.96cbm Qty in 20gp container24pcs Qty in 40gp container52pcs Main feature 1. Automatic tyre changer, the tilt backward and forward of the column and the lock of the column Can be completed pneumatically. 2. The quick deflate valves are installed before and after the bead breaker cylinder to increase the Moving speed of the cylinder, the one-side movement can be completed in about 2-3 seconds. 3. The horizontal arm adopts 50mm slide shaft securing the bend resistance strength of the horizontal arm. 4. The design of the bead breaker blade is arc shape, it can rotate at any direction, securing the best Bead breaking force. The bead breaker blade is equipped with the protective cover. 5. The hexangular shaft is made of s41 hexangular steel, which can avoid the distortion when Operating the stiff tire. 6. Column adopts the double bend process, making it very strong. 7. The bead breaker arm has the 2 travels, which ensure to demount the maximum 15" tire. 8. Optional equipped with hand or pedal style double speed motor if the machine is 3 phase, Increasing the efficiency of demounting and mounting. 9. The diameter of turntable cylinder is 80mm to increase the clamp force to the jaw on the rim. 10. In order to assure the safety during demounting and mounting, helpers can be optional Equipped according to the requirement of demounting and mounting flat stiff tire.
Model TC930IT Rim Clamping from Outside 10" to 20" Rim Clamping from Inside 12" to 24" Max. Wheel Diameter 1250mm Wheel Width 3"-15" Operating Pressure 8-10bar Motor Power 0.75/1.1kw Noise Level
ModelTC940 Rim clamping from outside 10"-20" Rim clamping from inside12"-24" Max.Wheel Diameter930mm Wheel Width3"-12" Operating Pressure8-10bar Motor Power0.75/1.1KW Noise Levelless than 75dB Net Weight230kgs Gross Weight270kgs Packing dimension980x760x1010mm Volume0.75cbm Qty in 20GP container34pcs Qty in 40GP container72pcs Main Feature of TC940 1. Automatic tyre changer, the tilt backward and forward of the column and the lock of the column can be completed pneumatically. 2. Tool head of the special steel with the feature of wear-resistance, not bend and break. 3. The customer can optional equip the plastic tool head according to the requirement. 4. The installation hole prepared on this model of machine is ready for the future update on the machine to assemble the helper. 5. The universal switch is 40A with a pure silver touching point, it can bear great load with a long using life. 6. The clamp is made of special material, strong and durable. 7. You can optional equip the MJ-B motorcycle adaptor easy for mounting and demounting, without damaging the rim and can work upside down. The dimension will extend 3" more or reduce 2" less after equip this. 8. Bead breaker is optional.
Marble, granite, stones, slates, tiles, power cord, wires, cables , cable assemblies, tyre scrap, used tyres, steel tire wire scrap, firewoods, pistachios, hazelnuts, textiles.
Tyre Repair Units Tyre repair patches for both bias as well as radial tyres. Cartons
Main Feature 1. Automatic tyre changer, the tilt backward and forward of the column and the lock of the column can be completed pneumatically. 2. The quick deflate valves are installed before and after the bead breaker cylinder to increase the moving speed of the cylinder, the one-side movement can be completed in about 2-3 seconds. 3. The horizontal arm adopts 50mm slide shaft securing the bend resistance strength of the horizontal arm. 4. The design of the bead breaker blade is ARC shape, it can rotate at any direction, securing the best bead breaking force. The bead breaker blade is equipped with the protective cover. 5. The hexangular shaft is made of S41 hexangular steel, which can avoid the distortion when operating the stiff tire. 6. Column adopts the double bend process, making it very strong. 7. The bead breaker arm has the 2 travels, which ensure to demount the maximum 15" tire. 8. Optional equipped with hand or pedal style double speed motor if the machine is 3 phase, increasing the efficiency of demounting and mounting. 9. The diameter of turntable cylinder is 80mm to increase the clamp force to the jaw on the rim. 10. In order to assure the safety during demounting and mounting, helpers can be optional equipped according to the requirement of demounting and mounting flat stiff tire. Technical Data: Model TC960 Rim Clamping from Outside 11" to 24" Rim Clamping from Inside 13" to 26" Max. Wheel Diameter 1040mm Wheel Width 3"-15" Operating Pressure 8-10bar Motor Power 0.75/1.1kw Noise Level
Capsicum Oleoresin is prepared by extracting the crushed capsicum (Capsicum Annum Linn) with volatile solvents by percolation method. It contains the pungent principles, capsicin not less that 8 percent. It also contains the red colouring matter called Capsanthin. This product is a powerful irritant and a carminative, which is also used as a counter irritant in lumbago and neuralgia. It can also be used to treat stomach ache that involves poorly functioning stomach muscles and as an antibacterial agents. Extraction of oleoresin capsicum from peppers involves finely ground capsicum, from which capsaicin is extracted in an organic solvent such as ethanol. The solvent is then evaporated, and the remaining wax like resin is the oleoresin capsicum. An emulsifier such as propylene glycol is used to suspend the OC in water, and pressurized to make it aerosol in pepper spray. The high performance liquid chromatography (HPLC) method is used to measure the amount of capsaicin within pepper sprays. Scoville Heat Units (SHU) are used to measure the concentration or "heat" of pepper spray. A synthetic analogue of capsaicin, pelargonic acid vanillylamide (desmethyldihydrocapsaicin), is used in another version of pepper spray known as PAVA spray which is used in the United Kingdom. Another synthetic counterpart of pepper spray, pelargonic acid morpholide, was developed and is widely used in Russia. Its effectiveness compared to natural pepper spray is unclear. Pepper spray typically comes in canisters, which are often small enough to be carried or concealed in a pocket or purse. Pepper spray can also be bought concealed in items such as rings. There are also pepper spray projectiles available, which can be fired from a paintball gun. It has been used for years against demonstrators. Derived from chilli peppers, oleoresin capsicum is the active ingredient in pepper spray and in some topical pain relievers.
Standard features: Tire Changer for Tubeless Tires with Wheel Diameter of14 to 56 Inches Product Description: Rim Diameter 14"-56" Maximum wheel diameter 2300mm Maximum wheel width 1065mm Maximum wheel weight 1600kg Gearbox motor 2.2Kw, 380V-3pH-50Hz(220V) Hydraulic Pump motor 2.2Kw, 380V-3pH-50Hz(220V) Machine Weight approx 850kg Operation control voltage 24V Temperature 0degree~50degree Noise
Product Introduce: Full automatic universal truck tire changer: All movements of the working parts are guide by the movable control platform, particulary suitable for handling truck wheels, farm wheels, passenger car wheels and industrial vehicle wheels between 14"-26" with deep grooved rims, tubeless, with ring. (Max. Wheel Diameter 1600mm-Max. Wheel width 800mm) Four-jaw universal chuck Movable control unit Locking jaws with different gripping possibility Hydraulic motor with pressure regulating device Working arm with quick rotation system Detailed Materials: Detailed Materials: Handles wheels from 14"-26" Maximum wheel diameter 1600mm Maximum wheel width 800mm Maximum wheel weight 1270kg Gearbox motor 2.2Kw Hydraulic pump motor 1.1Kw Power supply 220V/380V 3pH Operating pressure 0~130bar Net weight 590kg Noise
The features of our machine 1.It is used to mount/demount the drop center rim/tubeless wheel /wheel with ring of the passenger car/truck/agriculture vehicle/industrial vehicle. 2.The tool arm can automatically move horizontally and vertically. 3.Tool can automatic rotate. The spindle on the mounting head, use rolling bearing design, it can be used for the tire with huge resistance. 4.It is equipped with the hydraulic driven carriage making the tire moving on the tire changer without man power. 5.The small and portable console is very convenient to observe from different view Avoiding the wrong operation in the process of operation. 6.Dual speed main shaft motor can improve the working efficiency. 7.There is a safe protection switch on the lifting arm.
