We produce high quality LDPE recycled pellets which are used in a wide range of products. We use best scrap material for production, its been washed, filtered, degassed and homogenized. The pellets are available in different colors, MFIs, densities to suit customer requirements BLACK color recycled LDPE/LDPE granules/Low Density Polyethylene Melt Flow Index 0.629 g/ 10 min Density 0.806 g/cm3 Tensile Yield Strength 7 Mpa Wien Softening Point 85C Elongation at Break 75% Double filter 80 mesh Packing In 1200 kg big bags 24MT/40'FCL Please contact us for latest pricing
HDPE: HDPE cable material Property Unit Typical Value Mass density g/cm 3 0.941-0.959 Melt flow Rate(190 centidegree /2.16kg) g/10min 1.0 Tensile yield strength MPa 19.0 Flexural modulus Mpa 965 Elongation@ break % 400 Impact Embrittlement temperature centidegree MAX -118 Dielectric Constant 100KHZ 2.32 1MHZ 2.31 Loss Tangent 100KHZ MAX 0.0001 1MHZ MAX 0.0001 Volume resistivity OHM-CM MIN 1x10 15 Application Mainly used for the production of high toughness of the telephone,cable insulation material LDPE: Physical Properties Test Method Nominal Value Unit Density ISO 1183 0.921 g/cm3 Melt Mass-Flow Rate (MFR) ISO 1133 1.9 g/10min Hardness Shore Hardness (shore D) ISO 868 45 Mechanical Properties Tensile Modulus ISO 527-2 175 MPa Tensile Strength Yield, ISO 527-2 9.0 MPa Break, 13.0 MPa Tensile Strain(Break) ISO 527-2 850 % Modulus of Elasticity Internal Method 250 MPa Thermal Vicat Softening Temperature ISO 306/A50 89.0 �°C Melting Temperature (DSC) DIN 53765 108 �°C Peak Crystallization Temperature (DSC) DIN 53765 97.0 �°C Heat of Fusion DIN 53765 110 J/g Electrical Volume Resistivity ASTM D257 8.5E+15 ohm â?¢cm Dielectric Strength ASTM D149 30.0 kV/mm Dielectric Constant (60Hz) ASTM D150 2.20 % Dissipation Factor (60 Hz) ASTM D150 0.00050 LLDPE Properties Test conditon Test method Test data Unit Density 0.91 MFI 2 Drop impact strength ASTM D-1709 90 g Elongation ,vertical/horizontal ASTM D-882 600/800 % tensilestrength,thermal resistance ASTM D-1004 105/95 Kg/cm elongation ASTM D-638 930 % tensile strength ASTM D-638 180 tensile strength,vertical/horizontal ASTM D-882 380/350 Vicat softening point ASTM D-1525 103 C melting point ASTM D-2117 126 C Turbidity ASTM D-1009 12 % 45 glossness ASTM D-2457 75 %
Virgin & Recycled Low Density Polyethylene LDPE Granules
1.We use imported base paper from Germany. For solid color, base paper most 80 to 120GSM. For wood base paper is between 70-85 gsm 2. High quality water-base ink- Available over 200 shades in Solid colors and wood grains 3. With clear texture ,high Fidelity meeting international standards. 4. With smooth surface coating 5. Germproof, mould proof, antistatic and wear-resistance. 6. Green environmental protection and Odorlessness which Conforms to the GB18584-2001 standard requirement 7. Can be used for the hot press molding craft, the production efficiency is high. 8. Melamine paper takes shape easily, is widely used for the panel furniture and the decorative yarn. Product Specification: Width: 1230-1260mm or 1300-1800mm Length: 500-1000m For storing: Put it in room to a cool and dry place keep the temperature 20-25°C in room. The best humidity is: 50-60% We can also give you complete decorative solution with Matching Melamine Edge Banding, PU Paper. If you need just need Melamine/prelaminated boards either in MDF / Particle board we can also do so
We can supply: LDPE FILM approx.. 95% CLEAR / 5% COLOR and approx.. 98/2 BALES SCRAP WASTE. Mix post commercial and post industrial. Foreign bodies approx.. 1-2% (paper, stickers, tapes etc.), moisture approx.. 1-2% (open storage). Can load in 1x40HC container approx.. 26 MT (+ 10%). Ready for shipment. Photos available upon request. If you are interested kindly contact us for more information (price, available quantity etc.). You are welcome to visit our company premises and supervise our materials. Certificate ISO: 9001, ISO: 14001, OHSAS 45001, AQSIQ and CCIC.
rLDPE repro Yellow pellets from post-consumer & post-industrial films. The material is shredded and washed through a wash plant before it is processed through degassing and very fine filtration to produce high purity reprocessed resin. r-LDPE yellow is a blown film grade and exhibits excellent processability and good balance of toughness, strength and stretch properties. This grade is also be suitable for profile and sheet extrusion Packing: 1000kg bulk bag Melt flow rate (190�?C / 2.16kg) 0.5 �± 0.5 Density 0.92 �± 0.015 Measured on blown film of 25 �µm and BUR of 2.5 at external testing facility. rLDPE Yellow is typically extruded at a melt temperature around 190�?C (min 180�?C, max 240�?C). Mesh filters: 150 on the laser filter and 120 on the piston filters.
Type: Pellet Color: Black
Origin: New Zealand Color: Green Type: Pellet
Origin: UAE Material: LDPE Recycled Pellets Black Category: LDPE Type: Pellet Grade: Black Loading weight: 24 Tons Quantity: 24 Tons Specification: MFI: 0.95-1.20 To produce bag Price FOB: 640-840 USD/Tons
- 150 mesh - Origin: Turkey - Color: Black - Loading weight: 25MT
Origin: Japan Type: Recycled pellet Color: Natural Quantity: 25 MT Loading weight: 25 MT
Origin: Japan Category: LDPE Type: Recycled Pellet Grade: Natural Loading weight: 25 Tons Quantity: 25 Tons
Origin: Japan Category: LDPE Type: Recycle Pellet Grade: Natural Specification: LDPE + LLDPE (about 15%) From film MI: 3 Loading weight: 25 Tons Quantity: 25 Tons Price FOB: 760-960 USD/ Ton
MATERIAL : LDPE recycle pellet clear CATEGORY :LDPE TYPE :recycle pellet GRADE :clear SPECIFICATION :TDS is in drive photo. ORIGIN : NZ LOADING WEIGHT : 23 Tons FAS (USD/Ton): $850-1050 CNF (USD/Ton): $930-1130 CNF Hai Phong
Volume: 200mt per month Color: Hazel MFI: 0.28 Application: Bags & pouches, Film, Shrink Film, Blown Film Packing: Big Bag´s 1.200kg Origin: Portugal POL: Set bal or Lisbon, Portugal Place of Origin: : JAPAN, US, EUROPE Unit : Ton/Tons Minimum Order : 25 Tons Payment Term : T/T 50/50 and L/C 100% at sight Estimate Lead Time : 15 - 20 days Origin: Tokyo, Yokohama, Hamburg, New York, Long Beach Supplying Capacity : 200 tons/month Packaging : Jumbo Bag
LDPE film recycled pellets, Melt Flow Rate (MFR)1.2~1.3 Mesh #6, #6, #9 Place of Origin: : JAPAN, US, EUROPE Unit : Ton/Tons Minimum Order : 25 Tons Payment Term : T/T 50/50 and L/C 100% at sight Estimate Lead Time : 15 - 20 days Origin: Tokyo, Yokohama, Hamburg, New York, Long Beach Supplying Capacity : 200 tons/month Packaging : Jumbo Bags
LDPE Repro Pellets For Sales MATERIAL LDPE repro pellets film grade, black color CATEGORY LDPE TYPE Repro pellets GRADE Film grade, black color SPECIFICATION MFI : 0,9 - 2,3 (g/10min), Density : 0,91 - 0,94 (g/cm3),film grade, Black color. Packed in big bags, 1250kg - 1350kg per Big Bag.Max load in 40 HC cont: 26.5 tons 800 MT/Month" Origin Turkey LOADING WEIGHT 20-24 Tons FOB (USD/Ton) 1000-1300
LDPE Pellets A Grade For Sales MATERIAL : LDPE Pellets A Grade CATEGORY : LDPE TYPE : Pellets GRADE : Natural SPECIFICATION : Origin in Japan, Mesh 100, from LDPE film A ORIGIN : Japan LOADING WEIGHT : 25 Tons FOB (USD/Ton) : 1000-1200
Turkey origin - 200MT per month Data info: Density: 0.91 - 0.93 g/cm Melt Flow Index (190C/2.16 kg): 0.7 to 1.2 g/10 Moisture Absorption (23C, 50%Rh): min 0.01 - 0.03 % Ash Content: 1% Form: 3 mm granules POL: Istanbul, Turkey Place of Origin: :JAPAN, US, EUROPE Unit :Ton/Tons Minimum Order :25 Tons Payment Term :T/T 50/50 and L/C 100% at sight Estimate Lead Time :15 - 20 days Origin :Tokyo, Yokohama, Hamburg, New York, Long Beach Supplying Capacity :200 tons/month Packaging :Jumbo Bag
Polyethylene is the world's most widely used thermoplastic and is made by the polymerization of ethylene. Polyethylene is often classified by its density, because greater density corresponds with greater material rigidity. The world�¢??s largest volume polyethylene is high density polyethylene (HDPE), which has a relatively high degree of tensile strength. Plastic containers represent the most common household use of high-density polyethylene. At the opposite end of the spectrum is low density polyethylene (LDPE), which was the first type of polyethylene to be developed. Flexible packaging represents the most common household use of low-density polyethylene. Both high- density polyethylene and low-density polyethylene are also commonly used for moulding applications. Linear low-density polyethylene (LLDPE) can usually be manufactured at a slightly lower cost than low density polyethylene and has similar basic properties. While low-density polyethylene and linear low-density polyethylene are to a certain extent substitutable for each other, one may be more suitable than the other for a specific application.
