We produce high quality LDPE recycled pellets which are used in a wide range of products. We use best scrap material for production, its been washed, filtered, degassed and homogenized.
The pellets are available in different colors, MFIs, densities to suit customer requirements
BLACK color recycled LDPE/LDPE granules/Low Density Polyethylene
Melt Flow Index 0.629 g/ 10 min
Density 0.806 g/cm3
Tensile Yield Strength 7 Mpa
Wien Softening Point 85C
Elongation at Break 75%
Double filter 80 mesh
Packing In 1200 kg big bags 24MT/40'FCL
Please contact us for latest pricing
HDPE: HDPE cable material Property Unit Typical Value Mass density g/cm 3 0.941-0.959 Melt flow Rate(190 centidegree /2.16kg) g/10min 1.0 Tensile yield strength MPa 19.0 Flexural modulus Mpa 965 Elongation@ break % 400 Impact Embrittlement temperature centidegree MAX -118 Dielectric Constant 100KHZ 2.32 1MHZ 2.31 Loss Tangent 100KHZ MAX 0.0001 1MHZ MAX 0.0001 Volume resistivity OHM-CM MIN 1x10 15 Application Mainly used for the production of high toughness of the telephone,cable insulation material LDPE: Physical Properties Test Method Nominal Value Unit Density ISO 1183 0.921 g/cm3 Melt Mass-Flow Rate (MFR) ISO 1133 1.9 g/10min Hardness Shore Hardness (shore D) ISO 868 45 Mechanical Properties Tensile Modulus ISO 527-2 175 MPa Tensile Strength Yield, ISO 527-2 9.0 MPa Break, 13.0 MPa Tensile Strain(Break) ISO 527-2 850 % Modulus of Elasticity Internal Method 250 MPa Thermal Vicat Softening Temperature ISO 306/A50 89.0 �°C Melting Temperature (DSC) DIN 53765 108 �°C Peak Crystallization Temperature (DSC) DIN 53765 97.0 �°C Heat of Fusion DIN 53765 110 J/g Electrical Volume Resistivity ASTM D257 8.5E+15 ohm â?¢cm Dielectric Strength ASTM D149 30.0 kV/mm Dielectric Constant (60Hz) ASTM D150 2.20 % Dissipation Factor (60 Hz) ASTM D150 0.00050 LLDPE Properties Test conditon Test method Test data Unit Density 0.91 MFI 2 Drop impact strength ASTM D-1709 90 g Elongation ,vertical/horizontal ASTM D-882 600/800 % tensilestrength,thermal resistance ASTM D-1004 105/95 Kg/cm elongation ASTM D-638 930 % tensile strength ASTM D-638 180 tensile strength,vertical/horizontal ASTM D-882 380/350 Vicat softening point ASTM D-1525 103 C melting point ASTM D-2117 126 C Turbidity ASTM D-1009 12 % 45 glossness ASTM D-2457 75 %
We can supply: LDPE FILM approx.. 95% CLEAR / 5% COLOR and approx.. 98/2 BALES SCRAP WASTE. Mix post commercial and post industrial. Foreign bodies approx.. 1-2% (paper, stickers, tapes etc.), moisture approx.. 1-2% (open storage). Can load in 1x40HC container approx.. 26 MT (+ 10%). Ready for shipment. Photos available upon request. If you are interested kindly contact us for more information (price, available quantity etc.). You are welcome to visit our company premises and supervise our materials. Certificate ISO: 9001, ISO: 14001, OHSAS 45001, AQSIQ and CCIC.
rLDPE repro Yellow pellets from post-consumer & post-industrial films. The material is shredded and washed through a wash plant before it is processed through degassing and very fine filtration to produce high purity reprocessed resin. r-LDPE yellow is a blown film grade and exhibits excellent processability and good balance of toughness, strength and stretch properties. This grade is also be suitable for profile and sheet extrusion Packing: 1000kg bulk bag Melt flow rate (190�?C / 2.16kg) 0.5 �± 0.5 Density 0.92 �± 0.015 Measured on blown film of 25 �µm and BUR of 2.5 at external testing facility. rLDPE Yellow is typically extruded at a melt temperature around 190�?C (min 180�?C, max 240�?C). Mesh filters: 150 on the laser filter and 120 on the piston filters.