HFL filter provide high a filtration area with the 6"OD, the length is 40" and can re-- ach to 60".The inner o-ring insures no bypass, Appliations: and the handle desin makes the installation more easier. Waster Water Coolants The filter media is Polypropylene it can available in nominal or absolute rating from 0.45um to 70um
HFL filter provide high a filtration area with the 6"OD, the length is 40" and can re-- ach to 60".The inner o-ring insures no bypass, Appliations: and the handle desin makes the installation more easier. Waster Water Coolants The filter media is Polypropylene it can available in nominal or absolute rating from 0.45um to 70um
High flow filter housing.
Highe flow filter system can be widely used sewage and wastewater reuse, desalination, electronics and other fields. It is character with high ?ow, long working life and good operation of complex liquid.It consists of the housing and the cartridge.
HFL filter provide high a filtration area with the 6"OD, the length is 40" and can re-- ach to 60".The inner o-ring insures no bypass, Appliations: and the handle desin makes the installation more easier. Waster Water Coolants The filter media is Polypropylene it can available in nominal or absolute rating from 0.45um to 70um
HFL filter provide high a filtration area with the 6"OD, the length is 40" and can re-- ach to 60".The inner o-ring insures no bypass, Appliations: and the handle desin makes the installation more easier. Waster Water Coolants The filter media is Polypropylene it can available in nominal or absolute rating from 0.45um to 70um
HFL filter provide high a filtration area with the 6"OD, the length is 40" and can re-- ach to 60".The inner o-ring insures no bypass, Appliations: and the handle desin makes the installation more easier. Waster Water Coolants The filter media is Polypropylene it can available in nominal or absolute rating from 0.45um to 70um
HFL filter provide high a filtration area with the 6"OD, the length is 40" and can re-- ach to 60".The inner o-ring insures no bypass, Appliations: and the handle desin makes the installation more easier. Waster Water Coolants The filter media is Polypropylene it can available in nominal or absolute rating from 0.45um to 70um
Description Yitong high flow pleated filter adopts PP membrane or glass fiber membrane as filter media. It is designed to be a large OD filter(6inch/152mm), which gives it the feature of extremely high flow rate. The high flow feature helps to decrease the number of normal size filter cartridges, which means less cost will be needed. The PP membrane and Glass fiber membrane provides great interception ability and great chemical compatibility, which makes sure the great filtration effectiveness. Features 1 Large size (OD = 6inch/152mm) 2 High flow 3 Economical and cost effective 4 Thermal connecting tech is used, no adhesives 5 All PP structure gives it wide chemical compatibility Application 1 Seawater desalination 2 Sewage treatment 3Chemical and pharmaceutical industry 4 Food and beverage 5 Liquor industry
Model: PHFL OD: 6" Material: PP, PET Filtration rating: 1um ~100um Length: 20", 40", 60" MOQ: 1 pc Sample: Free Delivery time: within 7 days
OD: 6" Filtration rating: 1um ~100um Length: 20", 40", 60" Material: PP, PET MOQ: 1 pc Sample: Free Application: Desalination, Industrial process water treatment, Power plant condensate polishing, etc.
OD: 6" Filtration rating: 1um ~100um Length: 40" Material: PP, PET MOQ: 1 pc Sample: Free Applications: Desalination, Industrial process water treatment, Power plant condensate polishing, etc.
OD: 6", 6.5" Filtration rating: 1um ~100um Length: 20", 40", 60" Material: PP, PET MOQ: 1pc Sample: Free Application: Desalination, Industrial process water treatment, Condensate polishing, etc.
OD: 6.5" Filtration rating: 1um ~ 100um Length: 20", 40", 60" Material: PP, PET MOQ: 1 pc Sample: Free Application: Desalination, Industrial process water treatment, Power plant condensate polishing, etc.
OD: 6" Filtration rating: 1um ~100um Length: 20", 40", 60" Material: PP, PET MOQ: 1 pc Smple: Free High flow filters for Desalination pre-filters RO system.
High Flow pleated filter cartridge with 6" diameter and different end caps, usual lengths are 40" and 60", absolute rated 0.5micron, 1micron, 5micron, 10micron, 20micron, 50micron and 100micron, it's used as high capacity sediment filter for desalination and industrial applications. Specification MAIN TECHNICAL SPECIFICATION Maximum operation temperature: Glass fiber: 121C PP: 82C Maximum pressure drop: Glass fiber: 3.4bar at 121C PP: 3.4bar at 82C Recommended replacing pressure drop: 2.4Bar at 20C Suggested maximum flow of water: 20 inch: 660LMP 40 inch: 1300LMP 60 inch: 1900LMP TYPICAL APPLICATION Pre-filtration of RO, Pretreatment of sea water desalination Condensate water filtration, hot water recovery in power generation API, solvents and water filtration in Bio-Pharm market The filtration of bottled water, high fructose food oil, soft drinks and milk Paints and coatings, petrochemical, refineries Microelectronics, film, fiber and resin.
Product Features: 1. The combination of surface filtration and deep filtration can significantly reduce the number of filter elements and significantly reduce the size of the supporting shell compared to ordinary filter elements; 2. The filter layer is made of high-efficiency and low resistance materials, which can achieve ultra-high filtration efficiency of over 99% and extend the service life of the filter element; 3. The design of the convenient handle significantly reduces the time for replacing the filter element, making the replacement of the filter element simple and portable. 4. The overall polypropylene design and hot melt welding treatment effectively prevent the end cover from falling off and secondary pollution. 5. The design of the sealing interface reduces the risk of side flow and ensures the sealing and reliability of filtration; 6. The foldable design increases the filtration area, resulting in a significantly lower pressure drop than ordinary filter elements, 7. The design with a large diameter increases the capacity for pollutants, prolongs the service life, and reduces production costs; 8. Equipped with a skeleton to enhance the pressure resistance of the filter element during use; Working principle: The high flow filter element is designed with a large diameter for efficient filtration, and has a high-strength support skeleton both inside and outside. It is made of multi-layer composite progressive filtering materials, and is integrally hot-melt welded with an external sealing ring. Designed with a single flow rate of 50-90m3/H, this high flow filter is suitable for fields such as large-scale reverse osmosis pre filtration. The new patented folding of this filter element combined with a 6/152mm large diameter design reduces the number of filters and the requirements for filter housing size. At the same time, multiple filtering media can be provided to meet other application requirements.
Max q high flow filter cartridge is produced to replace the popular aqua big one line high flow filter elements from italy. Max q high flow filters include currently include 2 types: pp meltblown and pleated. Both types are widely applied in the normal water treatment fields. We offer the max q at better price but still good quality which has been proved by many customers' testings already.
Description The large diameter geometrical design of polypropylene pleated high flow filter cartridges enlarge surface filtration area, high dirt holding capacity to save the quantities of filter cartridges, high flow rate when filtration efficiency exceed 99%. high flow filter cartridges are wide range of chemical compatibility and applications, the ideal option for industrial high flow water filtration system to protect RO membrane. Feature 1. Gradient pore structure of high flow filter cartridges provide layered filter function 2. Outer hard cage can withstand higher pressure than Pall Ultipleat high flow filters made by soft netting 3. High flow filter cartridges are high filtration efficiency, lower waste disposal costs and more economical 4. Inside to outside filtration pattern of high flow filters ensure holding all impurities stay inside the pleated media 5. The highest flow rate of high flow filters could get 110 M3/H and Beta 5000 rated (99.98% efficiency) 6. The reduction of filtration system space maximum 50% and lower maintenance costs when use high flow filters 7. Materials meet FDA requirements, wide chemical compatibility, no resins, binders, or adhesives and 100% integrity testing Application 1.Paints and coatings 2. Microelectronic, film and resin 3. Water treatment in Power generation 4. RO Pre filtration and sea water desalination 5. Solvents, API and water filtration in Bio field 6. Bottled water, high fructose, edible oil, soft drink and milk
Replacement high flow cartridges are made of deep fine polypropylene or glass fiber membrane as filter media, with a large diameter of 6.5 inches / 165mm, no center rod, unidirectional opening, and specially designed to flow the liquid from the outside to the inside, ensuring that all contaminant particles are trapped outside the cartridge. The ultra-high flow rate design allows for a significant reduction in the use of cartridges and filters for the same flow rate application, resulting in significant savings in equipment investment costs and labor costs. Replacement 3M Models HF40PP***A01 70-0201-5570-4 HF40PP***B01 70-0201-5572-0 HF40PP***C01 70-0201-5574-6 HF40PP***D01 70-0201-5576-1 HF60PP***A01 70-0201-5600-9 HF60PP***B01 70-0201-5604-1 HF60PP***C01 R70-0201-5606-6 HF60PP***D01 70-0201-5616-5 HF40PP010A01 70-0201-5632-2 HF40PP005A01 70-0201-5634-8 HF60PP010A01 70-0201-5648-8 HF60PP005C01 770-0201-5652-0 RHF010EH 70-0201-5663-7 RHF020EH 70-0201-5667-8 RHF030EH 70-0702-5677-4 RHF050EH 70-0201-5556-3 RTM41HF005E 70-0201-5558-9 RTM41HF010E 70-0201-5560-5 RTM41HF020E 70-0201-5562-1 RTM41HF030E 70-0201-5564-7 RTM41HF050E 70-0201-5566-2 RTM41HF070E 70-0201-5568-8
