High Flow Filter Cartridge

High Flow pleated filter cartridge with 6" diameter and different end caps, usual lengths are 40" and 60", absolute rated 0.5micron, 1micron, 5micron, 10micron, 20micron, 50micron and 100micron, it's used as high capacity sediment filter for desalination and industrial applications.

Specification

MAIN TECHNICAL SPECIFICATION


Maximum operation temperature:

Glass fiber: 121C

PP: 82C

Maximum pressure drop:

Glass fiber: 3.4bar at 121C

PP: 3.4bar at 82C

Recommended replacing pressure drop:

2.4Bar at 20C

Suggested maximum flow of water:

20 inch: 660LMP

40 inch: 1300LMP

60 inch: 1900LMP

TYPICAL APPLICATION

Pre-filtration of RO, Pretreatment of sea water desalination

Condensate water filtration, hot water recovery in power generation

API, solvents and water filtration in Bio-Pharm market

The filtration of bottled water, high fructose food oil, soft drinks and milk

Paints and coatings, petrochemical, refineries

Microelectronics, film, fiber and resin.

Product Features:
1. The combination of surface filtration and deep filtration can significantly reduce the number of filter elements and significantly reduce the size of the supporting shell compared to ordinary filter elements;
2. The filter layer is made of high-efficiency and low resistance materials, which can achieve ultra-high filtration efficiency of over 99% and extend the service life of the filter element;
3. The design of the convenient handle significantly reduces the time for replacing the filter element, making the replacement of the filter element simple and portable.
4. The overall polypropylene design and hot melt welding treatment effectively prevent the end cover from falling off and secondary pollution.
5. The design of the sealing interface reduces the risk of side flow and ensures the sealing and reliability of filtration;
6. The foldable design increases the filtration area, resulting in a significantly lower pressure drop than ordinary filter elements,
7. The design with a large diameter increases the capacity for pollutants, prolongs the service life, and reduces production costs;
8. Equipped with a skeleton to enhance the pressure resistance of the filter element during use;
Working principle:
The high flow filter element is designed with a large diameter for efficient filtration, and has a high-strength support skeleton both inside and outside. It is made of multi-layer composite progressive filtering materials, and is integrally hot-melt welded with an external sealing ring. Designed with a single flow rate of 50-90m3/H, this high flow filter is suitable for fields such as large-scale reverse osmosis pre filtration. The new patented folding of this filter element combined with a 6/152mm large diameter design reduces the number of filters and the requirements for filter housing size. At the same time, multiple filtering media can be provided to meet other application requirements.

Replacement high flow cartridges are made of deep fine polypropylene or glass fiber membrane as filter media, with a large diameter of 6.5 inches / 165mm, no center rod, unidirectional opening, and specially designed to flow the liquid from the outside to the inside, ensuring that all contaminant particles are trapped outside the cartridge. The ultra-high flow rate design allows for a significant reduction in the use of cartridges and filters for the same flow rate application, resulting in significant savings in equipment investment costs and labor costs.
Replacement 3M Models
HF40PP***A01 70-0201-5570-4
HF40PP***B01 70-0201-5572-0
HF40PP***C01 70-0201-5574-6
HF40PP***D01 70-0201-5576-1
HF60PP***A01 70-0201-5600-9
HF60PP***B01 70-0201-5604-1
HF60PP***C01 R70-0201-5606-6
HF60PP***D01 70-0201-5616-5
HF40PP010A01 70-0201-5632-2
HF40PP005A01 70-0201-5634-8
HF60PP010A01 70-0201-5648-8
HF60PP005C01 770-0201-5652-0
RHF010EH 70-0201-5663-7
RHF020EH 70-0201-5667-8
RHF030EH 70-0702-5677-4
RHF050EH 70-0201-5556-3
RTM41HF005E 70-0201-5558-9
RTM41HF010E 70-0201-5560-5
RTM41HF020E 70-0201-5562-1
RTM41HF030E 70-0201-5564-7
RTM41HF050E 70-0201-5566-2
RTM41HF070E 70-0201-5568-8

SF patented string wound high flow type, with OD 6.22" and 1 to 100 micron range.

STRUCTURE

High Flow string wound filter is patented in China by SF Filter. Using multi-holes to make the filter 9 times dirt holding capacity as ordinary string wound cartridges. With O-rings to avoid bypass. 3 grades are available. HFA, HFB and HFC can meet most pre-filtration requirements.
The end cap and dimensions can be customized to meet certain requirments.

FEATURES

1 High dirt holding capacity, long service life
2 No bypass
3 Easy replacement
4 Through holes create real depth filtration
5 High flow rate and low pressure loss
6 Pure, clean and washed material which is same as NSF approved type (HFA).
7 Pure material, suitable for strong corrosion liquids (HFB).
8 Common material, allows lower price (HFC).

MAIN TECHICAL SPECIFICATION

1 Dimension: Outer diameter :158�±1mm, Inner diameter:70mm
2 Maximum operating Pressure: 0.5MPa
3 Maximum operating Pressure Drop: 0.2MPa
4 Temperature: 60 degrees

TYPICAL APPLICATIONS

1 Food & Beverage (HFA)
2 Pharmacy & Hospital (HFA)
3 Pre - RO (HF A & HFB)
4 Industrial liquid filtration
5 Other applications

Pall Ultipleat Replacement
Filter Media: PP Melt blown,Pleated glass fiber,Pleated depth PP
Length: 20"(508 mm),40"(1016 mm),60"(1524 mm)
Outside Diameter: 6 inch (152 mm)
Filtration Rating: 1m,4.5m,6m,10m,20m,40m,70m,100m
Support/Drainage: Polypropylene (PP)
End Cap Material: Glass fiber reinforced Polypropylene (PP)
Seal Material: EPDM,NBR

Features:
1.Hongtek use outside pp plastic frame for longer service life, can bear higher pressure than original Pall Ultipleat filter use outer hard netting.
2.Beta Rating can reach 5000 (99.98% efficiency) & Highest flow rate 110 m³/h
3.Unique crescent shaped pleated geometry, combined with its large 152 mm /6in diameter, reduces the number of filters and size of housing required.
4.Absolute rated filter medium for reproducible performance.
5.Out-to-in filtration constriction of mass flow pleated cartridges ensure holding all impurities stay inside the filter

Pall Ultipleat Replacement
Filter Media: PP Melt blown,Pleated glass fiber,Pleated depth PP
Length: 20"(508 mm),40"(1016 mm),60"(1524 mm)
Outside Diameter: 6 inch (152 mm)
Filtration Rating: 1m,4.5m,6m,10m,20m,40m,70m,100m
Support/Drainage: Polypropylene (PP)
End Cap Material: Glass fiber reinforced Polypropylene (PP)
Seal Material: EPDM,NBR

Features:
1.Hongtek use outside pp plastic frame for longer service life, can bear higher pressure than original Pall Ultipleat filter use outer hard netting.
2.Beta Rating can reach 5000 (99.98% efficiency) & Highest flow rate 110 m³/h
3.Unique crescent shaped pleated geometry, combined with its large 152 mm /6in diameter, reduces the number of filters and size of housing required.
4.Absolute rated filter medium for reproducible performance.
5.Out-to-in filtration constriction of mass flow pleated cartridges ensure holding all impurities stay inside the filter

Pall ultipleat replacement
Filter media: pp melt blown, pleated glass fiber, pleated depth pp
Length: 20"(508 mm), 40"(1016 mm), 60"(1524 mm)
Outside diameter: 6 inch (152 mm)
Filtration rating: 1m, 4.5m, 6m, 10m, 20m, 40m, 70m, 100m
Support/drainage: polypropylene (pp)
End cap material: glass fiber reinforced polypropylene (pp)
Seal material: epdm, nbr

Features:
1.Hongtek use outside pp plastic frame for longer service life, can bear higher pressure than original pall ultipleat filter use outer hard netting.
2.Beta rating can reach 5000 (99.98% efficiency) & highest flow rate 110 mâ³/h
3.Unique crescent shaped pleated geometry, combined with its large 152 mm /6in diameter, reduces the number of filters and size of housing required.
4.Absolute rated filter medium for reproducible performance.
5.Out-to-in filtration constriction of mass flow pleated cartridges ensure holding all impurities stay inside the filter

Pall ultipleat replacement
Filter media: pp melt blown, pleated glass fiber, pleated depth pp
Length: 20"(508 mm), 40"(1016 mm), 60"(1524 mm)
Outside diameter: 6 inch (152 mm)
Filtration rating: 1m, 4.5m, 6m, 10m, 20m, 40m, 70m, 100m
Support/drainage: polypropylene (pp)
End cap material: glass fiber reinforced polypropylene (pp)
Seal material: epdm, nbr

Features:
1.Hongtek use outside pp plastic frame for longer service life, can bear higher pressure than original pall ultipleat filter use outer hard netting.
2.Beta rating can reach 5000 (99.98% efficiency) & highest flow rate 110 mâ³/h
3.Unique crescent shaped pleated geometry, combined with its large 152 mm /6in diameter, reduces the number of filters and size of housing required.
4.Absolute rated filter medium for reproducible performance.
5.Out-to-in filtration constriction of mass flow pleated cartridges ensure holding all impurities stay inside the filter.

Pall ultipleat replacement
Filter media: pp melt blown, pleated glass fiber, pleated depth pp
Length: 20"(508 mm), 40"(1016 mm), 60"(1524 mm)
Outside diameter: 6 inch (152 mm)
Filtration rating: 1m, 4.5m, 6m, 10m, 20m, 40m, 70m, 100m
Support/drainage: polypropylene (pp)
End cap material: glass fiber reinforced polypropylene (pp)
Seal material: epdm, nbr

Features:
1.Hongtek use outside pp plastic frame for longer service life, can bear higher pressure than original pall ultipleat filter use outer hard netting.
2.Beta rating can reach 5000 (99.98% efficiency) & highest flow rate 110 mâ³/h
3.Unique crescent shaped pleated geometry, combined with its large 152 mm /6in diameter, reduces the number of filters and size of housing required.
4.Absolute rated filter medium for reproducible performance.
5.Out-to-in filtration constriction of mass flow pleated cartridges ensure holding all impurities stay inside the filter