Gas Turbine Engines (3 UNITS) Kawasaki Heavy Industries, Ltd Model MIT-26 Rated output 4347 KW 40 C Rotational speed 22000/1500 min 1 Serial number KHI-790112 Month of production 2018-2 Kawasaki Heavy Industries, Ltd. Hitachi Decelerator Model MPG160-23 Reduction ratio 14.618 Transmission power 4800KW Output rotational speed 1500 min-1 Serial number PG02524 construction number 0A006846A Manufacturing date 2018/2 T5000A-BER Rated output 4000kW Voltage 6600v Frequency 50Hz gas turbine MIT-26 Generator TAKL-SCKE Serial number KHI791ABA1003-3 Manufacturing date 2018-3 Current 438A Number of phases 3 �?? Height 3800 �?? width 3500 �?? depth 8500 Toshiba Emergency Synchronous Generators 3 units Phase number 3 Number of poles 4 Voltage 6600V Power factor 0.8 Rated continuous Phase number 3 Number of poles 4 Voltage 6600V Power factor 0.8 Rated continuous Output 5000KVA Current 438A Field voltage 70V Annual operation time 1000 hours Rotation speed 1500 min-1 Frequency 50Hz Field current 455A Output 5000KVA Current 438A Field voltage 70V Annual operation time 1000 hours Rotation speed 1500 min-1 Frequency 50Hz Field current 455A Refrigerant temperature 40 �?�° C Field winding 155 (F) Heat resistant class; Armature winding 155 (F) AC exciter: Output 39 KVA Voltage 55V Current 410A Field voltage 90V Protection method IP20 Cooling method ICO 1 Mass 9660 Kg Serial number 7154498BQA2000 Standard JEC-2130-2016
Firewood, pellets from sunflower husks, bran and straw; briquettes from corn straw etc.; e bikes; small wind turbines.
New Surplus (3) GE 40 MW 6B (HFO) Gas Turbines New Surplus Heavy Duty (3) GE 40 MW 6B Simple Cycle Heavy Fuel Oil Turbines with Warranty. The New surplus turbines are available due to a cancelled project and come with GE transferable warranty. The turbines are heavy duty and designed to run on heavy fuel oil, 11.5 KV, 3000 rpm, 50 HZ, Fuel: Heavy Fuel Oil (HFO) and Distillate Fuel Oil. These are complete turbines with all fuel systems, electrical systems, control systems, air systems, cooling systems compressor systems, starting system, Lubricating system, fire fighting system and much more.
New surplus (3) ge 40 mw 6b (hfo) gas turbines New surplus heavy duty (3) ge 40 mw 6b simple cycle heavy fuel oil turbines with warranty. The new surplus turbines are available due to a cancelled project and come with ge transferable warranty. The turbines are heavy duty and designed to run on heavy fuel oil, 11.5 kv, 3000 rpm, 50 hz, fuel: heavy fuel oil (hfo) and distillate fuel oil. These are complete turbines with all fuel systems, electrical systems, control systems, air systems, cooling systems compressor systems, starting system, lubricating system, fire fighting system and much more.
turbine Material:low alloy Weight:60.7kg Process: investment casting+Machining Description:Turbine is a rotary mechanical device that extracts energy from a fluid flow and converts it into useful work
Material:low alloy Weight:60.7kg Process: investment casting+Machining Description:Turbine is a rotary mechanical device that extracts energy from a fluid flow and converts it into useful work
Turbine We offer the best competitive pricing for a large range of parts from nuts and bolts, gaskets, thermocouples, valves and sensors to major "Hot Gas Path" components such as nozzles, buckets, X-Fire tubes, combustion liners, fuel liners, fuel nozzles, and transition pieces. All of our parts carry a full one-year warranty against defects in material or workmanship.
Turbines This is heavy turbine ...Very useful..
The Axial turbine is for low head power plants. Water flows axially into and out of the turbine. Axial flow turbines fall into two categories, fixed blade runner and variable pitch runner, also known as a Kaplan turbine. Fixed blade turbines are very well suited to low head power plants with limited variation in head and load. Its main advantage is its simple design. When operated at fixed speed, maximum efficiency is achieved at the design head and water flow. Kaplan turbines are used for medium to large power stations where there are large variations in the head, water flow and load. Its main advantage is its ability to adapt to variable conditions with a high efficiency. The variable pitch runner is mechanically more complex than a fixed pitch runner. Axial flow turbines can be supplied for a head of 2m to 70 m. The runner diameter is available from 0.6 m to 5 m. Power capacity is from 55 kW to 50 MW.
The tubular turbine is an axial flow turbine, in a straight or S-shaped configuration. A Tubular Turbine can be supplied for a head of 2 m to 30 m. The runner diameter is available from 0.8 m to 5.6 m. Power capacity is from 250 kW to 15 MW. This turbine has high efficiency and lower constructon cost.
Pelton turbine The runner has bucket shaped blades on the periphery. The jet of water is tangential to the runner. The characteristics are, high head applications, a simple design, few problems with cavitation, highly cost effective. Pelton turbines can be supplied for a head of 100m to 500 m. The runner diameter is available from 0.55 m to 1.5 m. Power capacity is from 200 kW to 10 MW. Inclined jet turbine: The water flows into and out of the runner at an angle to the main shaft. The characteristics are high efficiency over a wide range of water flow, more flexible installation options, somewhat more complex than a Pelton turbine. Inclined jet turbines can be supplied for a head of 60m to 300 m. The runner diameter is available from 0.32 m to 0.8 m. Power capacity is from 55 kW to 6.3 MW.
In a Francis turbine, the water flows radially into the turbine and axially out of the runner. The Francis turbine, invented by an American engineer in 1849, is the most widely deployed modern turbine. The main characteristics of the Francis turbine are - a wide range of water head, simple and reliable structure, and high efficiency. A Francis Turbine can be supplied for a head of 15 m to 250 m. The runner diameter is available from 0.4 m to 4.5 m. Power capacity is from 75 kW to 50 MW. New style francis turbine, compared to the old one, it has the advantages of convenient installation, high efficiency, low noise and compact structure.
Heavy Fuel Oil (HFO) is a residual fuel incurred during the distillation of crude oil. It is primarily used to generate motion and/or heat that have a particularly high viscosity and density. Mainly used in industrial boilers and other direct source heating applications. It is also used as a principal fuel in marine applications and large diesel engines. Generally HFO typically includes bitumen, asphaltenes and long chain polycyclic aromatic hydrocarbons.
It is a gas turbine location in Jeddah Saudi Arabia inside Petro Rabigh
Dear buyer! We can provide services for the purchase of Aviation Turbine Fuel (Jet A1, JA1, JP A1) for export. Origin: Kazakhstan/ Russia, MOQ:500.000BBLS, FOB price: $73/$69, CIF price: $69/$65 (Gross and Net respectively). contact us for the procedure. Note: Seller do not work according to someone else's procedures. The seller will deliver on the terms: CIF / FOB ports ROTTERDAM, SHARJAH UAE/MERSIN TURKEY, UST-LUGA.
Introducing NGS Dry-Charged Battery: Trusted Power for Over 25 Years! Embark on a journey of reliability and performance with NGS Dry-Charged Battery â?? a stalwart in automotive power for over two and a half decades. As pioneers in Dry-Charged Lead Acid Battery manufacturing, we bring you a product engineered for excellence. Our batteries, available in both JIS (Japanese Industrial Standard) and DIN (Deutsch Institut Normung) types, are a testament to precision engineering and enduring quality. Whether for conventional or advanced automotive systems, trust NGS to deliver steadfast power you can depend on. Designed without electrolyte, our Dry-Charged Battery boasts an extended shelf life, making it the ideal choice for storage and backup power. Simply add electrolyte, and the battery springs to life, ready to fuel your journey with unwavering performance. Tailored for warm climates, our Dry-Charged Battery thrives in challenging conditions, ensuring optimal performance even in the harshest environments. From bustling cities to remote landscapes, trust NGS to keep you moving forward with confidence. Experience the difference with NGS Dry-Charged Battery where longevity meets reliability, ensuring your vehicle stays powered for miles to come.
Introducing the NGS Maintenance-Free Automotive Battery: Trusted Power for Over 15 Years! Elevate your driving experience with our premium NGS Maintenance-Free Automotive Battery. Engineered to perfection and backed by over 15 years of global market dominance, our batteries deliver unparalleled performance and reliability. Crafted to meet the rigorous standards set by international authorities including JIS, DIN, and IEC, our batteries are synonymous with quality and precision engineering. From compact 32 AH models to robust 240 AH powerhouses, we offer a comprehensive range to suit every vehicle's needs. Say goodbye to the hassle of maintenance with our maintenance-free design, allowing you to focus on the road ahead with confidence. Whether you're navigating city streets or embarking on cross-country adventures, trust NGS to power your journey with unwavering reliability and superior performance. Experience the difference with NGS Maintenance-Free Automotive Battery where innovation meets longevity, ensuring your vehicle stays powered for miles to come.
Turbine Blower
Mineral resources, jet fuel a1, diesel en590, d6, bonny light crude oil, icumsa 45 sugar, liquid natural gas = lng, liquid propane gas = lpg, natural gas (out eu pipeline) = ng, lithium ore, lithium carbonate, lithium hydroxide; bitumen: 35/50, 40/50, 50/70, 60/70, 70/100, 80/100 & vg3;.
Extreme Pressure Industrial Turbine EP Oil 32/46 DESCRIPTION KORYO TURBINE EP OIL is a premium high-quality turbine oil with extreme pressure additives, designed of modern gas turbines and combined cycle gas turbines, it provides oxidation inhibitors, protection against rust & corrosion and excellent air release properties, recommended for hydraulic turbines, industrial gas and steam turbines, rotating machinery, machine tools and air compressors hydraulic systems PERFORMANCE Siemens TLV 9013 04/05, ASTM D4304-Type II, DIN 51515, Part I/II, Alstom HTGD 90117, Cincinnati Machine P-38, U.S.Steel 120, MAN Turbo & Diesel TQL T2, British Standard BS489, DIN 51515, PART I (L-TD), PART II (L-TG) PACKAGE 20L, 200L Steel Pail/Barrel