Hardener For Epoxy Suppliers and Manufacturers

DATA SHEET FOR EPOXY EPOXY COATING :- INTRODUCTION - EPOXY COATING (HYB) is a two part high solids solvent free epoxy phenolic resin based coating system designed for hard wearing, smooth surface finish for floors, walls and on steel structures. Nonskid surface finish can be achieved on floor, if required. FEATURES: 1) Hard Wearing 2) Non Dusting 3) Excellent Surface Finish 4) Non Smelling 5) Good Aesthetics 6) Highly Chemical Resistant APPLICATION: 1.Stir well before mixing Part A and Part B and mix in the prescribed ratio. 2.Apply one coat of EPOXY primer on the clean and dry surface. 3.EPOXY COATING (HYB) should be applied on the surface by brush or roller within 24 hrs. After application of primer coat it should be allowed to air dry for min. 4 hrs. Preferable in a dust free atmosphere. 4.Apply min. 2 coats with the intercoat interval of 6-8 hrs. PRODUCT SPECIFICATIONS: Application - Brush, Roller Mixing Ratio - As Directed on Packing Port Life - 30 Mins. Drying Time - Touch Dry- 30 Min, Hard Dry 6 Hrs. - Intercoat Interval 6-8 Hrs. Min. - Dry Film Thickness 125-150 Microns/per coat - depending on porosity Covering Capacity - 6-8 sq.met/kg per coat depending on porosity, roughness & method of application. Color Shades - All Standard Shades RECOMMENDED USES: 1) Food & Pharmaceutical 2) Work Shop 3) Clean Room Application 4) Chemical Resistant Coating for Concrete& Steel 5) Petrochemical, Fertilizer plants METHOD OF APPLICATION: SURFACE PREPARATION The long-term durability of the applied Epoxy coating (HYB) epoxy coating is dependent on the adhesion between sub-base and coating material. It is most important therefore, that the substrate surfaces are correctly prepared prior to application. 1.Before application of the Epoxy coating (HYB) surface should be free from loose partials, rust, oils, grease or earlier coatings and should be totally dry. 2.New concrete or cementations surface should be placed at least 28 days and have a moisture content of less than 5% before application of Epoxy coating (HYB) 3.After surface is dry, all repair work like sealing of joints, cracks filling of cavities and crevices should be carried out. HEALTH & SAFETY - Keep the containers tightly closed when not in use. Avoid contact with skin & eyes. It comes in contact with the body, wash affected parts with plenty of water and contact a doctor. Other known sector for Epoxy floor lining, Epoxy garage floor lining, Concrete epoxy lining, Concrete floor epoxy lining, Epoxy pipe lining, Marine epoxy lining, Sub marine epoxy lining, Basement lining epoxy floor shield, Louisiana, Oregon, Chip lining color epoxy floor, Aviation lining epoxy interior.

Epoxy Finish Paint is two-component, polyamide adduct cured, General Purpose Air drying Epoxy Coating. Its Excellent substitute to Enamel.

65Mn CK67 high carbon cold rolled spring steel strip Hardened and Tempered Steel Strip Hardened and Tempered is a thermal process that strengthens steel strips through a controlled heating and cooling process. The hardening process involves heating the steel strip to above the rapidly cooling. The steel strip in this condition is extremely brittle and requires further treatment in the tempering. Then strips are reheated to a lower temperature and holding it at the given temperature for a given period of time. This process is done in an inert atmosphere to avoid oxidation. This type of steel strip has big degree of toughness and has excellent spring properties Standard AISI, ASTM, BS, DIN, GB, JIS Place of Origin China Material Hot Rolled Surface Polished Application shutter door, plastic trowel, bricklayer trowel, putty knives, scraper, springs, metal part, shoe insole, shoe accessories, blade, band saw blade Brand Name HENSON Width 2.0mm-300.0mm Length Customize Tolerance +/-10% Hardness 40-55HRC Surface nature, blue, yellow, white, polish Edge Slit,Round,Square MOQ 1000KGS Tolerance thickness+/-0.01mm max,width +/-0.05mm max Type strip,coil,sheet Coil ID 300-500 mm Tensile Strength 540-1575N/mm2 Yield Strength 370-1475N/mm2

Spring steel strip Steel grade 65Mn,1065,SAE1055,1045,CK50,CK55, CK60,CK67, CK70,CK75, C75Cr1,50CrV4, 51CrV4, 60Si2Mn, etc Thickness 0.08-4.0mm Width 3-400mm Hardness <200HV, 200-300HV, 300-550HV Edge slit edge; both rounded; one side round, one side slit; square etc Surface polished (blue, yellow, white, grey-blue, black, bright) or Nature etc Tolerance thickness +/-0.01mm max; width +/-0.05mm max Physical propety Tensile strength: 450-1850N/mm2

Thickness Tolerance+/-0.01mm Width Tolerance+/-0.05mm Surface nature, blue, yellow, white, polished, white polished, bright, black Coils weight as your request MOQ 1 Ton Monthly capacity 500 Tons Package Standard Seaworthy Package Payment L/C, Western Union, D/P, D/A, T/T, Trade assurance Application band saw blade, rolling shutter spring, bricklayer trowel, plaster trowel, putty knives, scraper, power trowel blade, lawn trowel blade, shoe insole, flat spring, toy spring, spring baskets etc.

Size 1 litre 5 litres 10 litres 25 litres 200 litres thinner contains alcohols. For thinning all common, solvent-based epoxy resin systems. Ideal for cleaning equipment. With medium-slow evaporation. Preliminary tests are recommended Weight n/a Size 1l, 5l, 10l, 25l, 200l

Size 1 litre 5 litres 10 litres 25 litres 200 litres Epoxy thinner contains alcohols. For thinning all common, solvent-based epoxy resin systems. Ideal for cleaning equipment. With medium evaporation. Preliminary tests are recommended Weight n/a Size 1l, 5l, 10l, 25l, 200l

Replacement hardener red for cartridge 1.5 kilo Size 40g

65Mn CK67 high carbon cold rolled spring steel strip Hardened and Tempered Steel Strip Hardened and Tempered is a thermal process that strengthens steel strips through a controlled heating and cooling process. The hardening process involves heating the steel strip to above the rapidly cooling. The steel strip in this condition is extremely brittle and requires further treatment in the tempering. Then strips are reheated to a lower temperature and holding it at the given temperature for a given period of time. This process is done in an inert atmosphere to avoid oxidation. This type of steel strip has big degree of toughness and has excellent spring properties Standard AISI, ASTM, BS, DIN, GB, JIS Place of Origin China Material Hot Rolled Surface Polished Application shutter door, plastic trowel, bricklayer trowel, putty knives, scraper, springs, metal part, shoe insole, shoe accessories, blade, band saw blade Brand Name HENSON Width 2.0mm-300.0mm Length Customize Tolerance +/-10% Hardness 40-55HRC Surface nature, blue, yellow, white, polish Edge Slit,Round,Square MOQ 1000KGS Tolerance thickness+/-0.01mm max,width +/-0.05mm max Type strip,coil,sheet Coil ID 300-500 mm Tensile Strength 540-1575N/mm2 Yield Strength 370-1475N/mm2

65Mn CK67 high carbon cold rolled spring steel strip Hardened and Tempered Steel Strip Hardened and Tempered is a thermal process that strengthens steel strips through a controlled heating and cooling process. The hardening process involves heating the steel strip to above the rapidly cooling. The steel strip in this condition is extremely brittle and requires further treatment in the tempering. Then strips are reheated to a lower temperature and holding it at the given temperature for a given period of time. This process is done in an inert atmosphere to avoid oxidation. This type of steel strip has big degree of toughness and has excellent spring properties Standard AISI, ASTM, BS, DIN, GB, JIS Place of Origin China Material Hot Rolled Surface Polished Application shutter door, plastic trowel, bricklayer trowel, putty knives, scraper, springs, metal part, shoe insole, shoe accessories, blade, band saw blade Brand Name HENSON Width 2.0mm-300.0mm Length Customize Tolerance +/-10% Hardness 40-55HRC Surface nature, blue, yellow, white, polish Edge Slit,Round,Square MOQ 1000KGS Tolerance thickness+/-0.01mm max,width +/-0.05mm max Type strip,coil,sheet Coil ID 300-500 mm Tensile Strength 540-1575N/mm2 Yield Strength 370-1475N/mm2

Thickness Tolerance+/-0.01mm Width Tolerance +/-0.05mm Surface nature, blue, yellow, white, polished, white polished, bright, black Coils weight as your request MOQ 1 Ton Monthly capacity 500 Tons Package Standard Seaworthy Package Payment L/C, Western Union, D/P, D/A, T/T, Trade assurance Application band saw blade, rolling shutter spring, bricklayer trowel, plaster trowel, putty knives, scraper, power trowel blade, lawn trowel blade, shoe insole, flat spring, toy spring, spring baskets etc.