Gypsum Board Equipment Suppliers and Manufacturers

Our gypsum board production line applies international up-to-date equipments, such as full automatic batching system, plate type forming system, auto edge-adjusting, fixed length cutting, turnover transverse conveyor, transverse dryer, prevent folding device, automatic tracking mechanism, humidity and temperature auto-control device, fully automatic wrapping and booking device, auto packing system and so on. The batching system achieved fool-operation of 20 kinds of powder and slurry, and our production line can adjust metering and adding of each main and auxiliary material automatically according to the forming speed. The packing will suitable for seaworthy packing.

https://www.wuxingmachine.com/productstags/drywall-manufacturing-equipment.html Drywall Manufacturing Equipment Gypsum can be a difficult material to work with due to its variability, tendency to harden into a cement-like form, and its abrasive nature. Therefore, choosing a heavy-duty handling solution designed for the unique characteristics of the gypsum sample to be treated will provide the best results. Wuxing has always been committed to providing the highest quality custom plaster equipment and process solutions. Gypsum board manufacturing process The manufacturing process of gypsum board can be divided into the following six steps: Raw material handling: All raw materials including gypsum powder, water and other additives enter the mixer through the automatic metering system and conveying system. After mixing, the gypsum slurry produced by the mixer is evenly spread on the surface of the continuously moving base paper. Stirring: With constant movement and vibration, the gypsum slurry gradually spreads and is evenly spread on the surface of the moving base paper. Then it enters the forming machine and is compounded with tissue paper. Molding: Through extrusion molding, the gypsum slurry is sealed by the top paper and bottom paper. This results in a pulp continuous drywall. The wet gypsum board is conveyed by the shaping belt, and gradually takes shape after the board is shaped, naturally condensed, and automatically cut. After the wet boards are arranged by the program-controlled system, they pass through the 1# horizontal conveyor and plate turner, and then quickly enter the dryer through the distribution bridge. Drying: Under strict control of the temperature zone of the dryer, use hot air at different temperatures to dry the wet board. Modified starch will stick to the paper. The dry drywall is then removed from the dryer. Cutting and edge sealing: Fold the gypsum boards over again (face inward), cut them into finished products of a certain size, and seal the edges to meet customer requirements. Stacking: Finally, it comes to automatic stacking machines for stacking. After stacking, it can be transported to the warehouse by forklift.

Paper gypsum board production line is the equipment which produces new building materials----paper gypsum board production line. This production line mainly by three major part is composed, namely: material room, heating system, integral unit. Equipment types of plaster board production line: 1.Heat conducting oil drying 2.Hot air type drying Drying system:drying board with heated air inside of dryer Fuel:coal,national gas,heavy oil Main material:construction gypsum ,modified starch,paper foaming agent,water latex, and paper pulp. Quality standard:comply with GB/T19001-2000 Certificate Authentication:ISO and CE Our production line with high degree of automation,low power consumption,high quality.The production are according with the national standard. Production features: this equipment is produced by light, heat insulation, noise, fire and other characteristics. Equipment features:small investment, easy to operate, space small, high efficiency. Containers

Gypsum board equipment Packaging & delivery Packaging details:standard container for gypsum board equipment Delivery detail:30 days Main features of gypsum board equipment 1) the professional producer of gypsum board equipment 2) powder-saving and higher production capacity . 3) smooth and reliable performance. 4) fineness: 30425 mesh (adjustable) 5)run for 1000 hours without lubrication Hebei xiangyi mechanical co., ltd. Is professional in designing and manufacturing all kinds of industrial equipments. In the last few years, we have su 1. Gypsum board production line/making machine; 2. Gypsum powder production line; 3. Gypsum board lamination machine; 4. Mineral wool boar d production line; etc. With professional and scientific operations, we will continue to provide the most humanity management and entrepreneurship opportunities for all the old and new customers! Gypsum board equipment Xiangyi gypsum board production line applies the international latest equipments, and the finished gypsum boards have many advantages, such as good appearance, exact size and thickness, stable quality, etc. The gypsum board production line take gypsum plaster for building purpose as the main raw material, mix it with chemical additives and water, continue pours into the space between two shielding tissue, through edge sealing, pressure, coagulation, cut, dry and so on, which make the light building materials. The characteristic of our gypsum board production line include low energy consumption, no pollution and quick construction. Annual capacity 2 million to 30 million square meters Automationfull automation or semi automation Certificateiso9001, ce Drying systemhot air or thermal oil Fuel varietycoal, natural gas, diesel oil, heavy Welcome to coperation with us.

(1)product name Made in china gypsum board production line equipment (2)capacity 2-40 million square meters (3)fuel Coal, gas, diesel oil, heavy oil, ect (4)cooperation countries Iran, qatar, saudi arabia, sudan, pakistan, ukraine, gypsum (5)packing In wooden case and in nude 40gp container and fr container Average weight of container: 20 tons (6)after-sales services 1)the machine guarantee 1years except worn parts such as bearings, electric buttons 2)machine installation and commission: 2 to 4 months when the buyer prepare the Installation and commission conditions 3we offer engineers train the buyers to operate the machine and after you master the machine Than pay us the installation and commission payment 4)in order to guarantee the machine running, each year we will send engineer to check and Development the technology with the buyer 5if the buyer can not run the machine well then we will send the production engineers to help The buyer run the machine , and we can cooperate for long terms (7)gypsum specification Length:2440mm Width:6mm-15mm Thickness:9.5mm-15mm (8)type Standard gypsum plasterboard Fire-resistant gypsum plasterboard Water resistant gypsum plasterboard

Our gypsum board manufacturing equipment applies international up-to-date equipments, such as full automatic batching system, plate type forming system, auto edge-adjusting, fixed length cutting, turnover transverse conveyor, transverse dryer, prevent folding device, automatic tracking mechanism, humidity and temperature auto-control device, fully automatic wrapping and booking device, auto packing system and so on. The batching system achieved fool-operation of 20 kinds of powder and slurry, and our production line can adjust metering and adding of each main and auxiliary material automatically according to the forming speed. Will shipment by sea, and the packing will suitable for seaworthy packing.

Main Features of gypsum board equipment: 1) The professional producer of gypsum board equipment 2) Powder-saving and Higher Production Capacity . 3) Smooth and Reliable Performance. 4) Fineness: 30425Mesh (Adjustable) 5) Run for 1000 hours without Lubrication Hebei xiangyi Mechanical Co., Ltd. is professional in designing and manufacturing all kinds of industrial equipments. In the last few years, we have successfully developed many kinds of industrial equipments. Pls find our products as belows: 1. Gypsum board production line/making machine; 2. Gypsum powder production line; 3. Gypsum board lamination machine; 4. Mineral wool board production line; etc. With professional and scientific operations, we will continue to provide the most humanity management and entrepreneurship opportunities for all the old and new customers! Gypsum Board equipment xiangyi gypsum board production line applies the international latest equipments, and the finished gypsum boards have many advantages, such as good appearance, exact size and thickness, stable quality, etc. The gypsum board production line take gypsum plaster for building purpose as the main raw material, mix it with chemical additives and water, continue pours into the space between two shielding tissue, through edge sealing, pressure, coagulation, cut, dry and so on, which make the light building materials. The characteristic of our gypsum board production line include low energy consumption, no pollution and quick construction.

Gypsum board processing line Gypsum board equipment Finished gypsum board specification Dimension of gypsum board: Thickness: 7mm-22mm Width: 1200mm or 1220mm Length: 1800mm~3600mm Types of gypsum board A) common paper surface gypsum board B) fireproof paper surface gypsum board (h) C) waterproof paper surface gypsum board (s) Advantages of gypsum board 1) product quality: product quality is priority to the international standard gb/t9775-1999 (equal to european standard). 2) the gypsum board which pr oduced by the gypsum board machine is heat-resistant, fire-resistant, insulated, light, nonpoisonous, little pollu tion, adjusti ng the humidity of the room. Main systems of gypsum board production line: 1. Paper supply system2. Gypsum powder supply system;3. Water supply system; 4. Foaming system5. Forming system6. Conveying system; 7. Drying system8. Heating system9. Size fixing system; 10. Dust removal system;11. Sealing system12. Control system Our advantage 1) our machine produced the gypsum board quality can same good with knauf board. But the line price is very low than them 2) our machine is can removable, when finsihed produce the machine , can install in our factory and then move and shipping in our here, so it is easily to install on buyer, s site. 3) some parts ans steels can doing on site, we will using the raw materials doing on buyer, site, so this will save more charge for shipping for buyers. 4) we provided the longlife technical and service

1. Annual output: 5million to 30 million sqm(based on thickness of 9.5mm gypsum board) 2. Working time: 24hours/day and 300 working days/year 3. Raw material: Gypsum powder, shielding paper, modified starch, foaming agent, glue 4. Fuel: Natural gas, diesel, heavy oil or coal 5. Product quality and specification: 1) The product is in compliance with National Standard GB/T9775-2008 2) Product specification: Length: 2400mm~3600mm Width: 1200mm or 1220mm Thickness: 8mm-20mm 6. Main process: 1)Raw material blending; 2)Shaping; 3)Wet board/panel conveying; 4)Drying; 5)Dry board/panel conveying; 6)Finished product stacking and storage. 7. Main technology: The production line adopts special designed hot air stove heating system 8.Raw material consumption list: (Based on 9.5 mm gypsum board for reference)

Quick Information Brand Name: wuxing Place of Origin: China Model Number : WX-07 certification : ISO 9001,CE Description High Quality Gypsum Board Production Line Equipment Introduction of the Equipment Gypsum board production line based configuration table Annual production � Plant area � Drying method Total installed capacity Productin linespeed m/min Requird workers Electrical configuration 1.5 million 60m 26m Thermal oil 116kw 3.0 8 Siemens 2million 70m 26m Thermal oil 127kw 4.2 10 Siemens 3million 84m 30m Thermal oil 166kw 6.25 11 Siemens 4million 110m 30m Thermaloil/HMethacrylateot stove 210kw 8 11 Siemens 5million 112m 30m Thermaloil/Hot stove 234kw 10.5 11 Siemens 6million 122m 30m Thermaloil/Hot stove 240kw 12.5 11 Siemens 8million 136m 30m Thermaloil/Hot stove 349kw 16.5 11 Siemens 10million 150m 30m Thermaloil/Hot stove 467kw 20 12 Siemens 12million 172m 30m Thermaloil/Hot stove 488kw 24 13 Siemens 15million 204m 36m Thermaloil/Hot stove 578kw 31 15 Siemens 20million 240m 40m Thermaloil/Hot stove 778kw 40 15 Siemens Product specifications length 2400 3000mm width 1200 1220mm thickness 8 15mm Gypsum board production line is the current production of new special equipment for decorative materials, the main work processes include: 1. The plaster and water and various additives, respectively, by automatic metering, automatic delivery system into the mixer, mixing into a gypsum slurry, and evenly sprinkled in the continuous forward movement of the face paper; 2. In the continuous forward while vibrating, the slurry gradually spread evenly, then into the extrusion molding machine and the upper and lower face paper complex, by the extrusion molding pulp is completely covered by the upper and lower skin paper, and extruded into Continuous slurry gypsum board; Annual output: 1.5 million square meters / year -3000 square meters / year 1. Reasonable design, perfect matching, reliable operation; 2. My company has: less investment, fast construction, low operating costs, cost-effective advantages; 3. Set the production line design, manufacture, installation, commissioning, production in one, created a number of elite teams; Service items: 1. My company has a professional installation team, home installation and commissioning, until the production of qualified products so far; 2. Long-term supply of spare parts, equipment warranty for one year The progress of the project construction, project approval, process layout, civil construction, equipment selection, production and installation, production commissioning, trial production stage, the entire process can be completed in 3 to 5 months. Price Delivery Port : Tianjin Packaging & Delivery Packing :wooden box package or null in containersDelivery Lead Time : Finish the order for 1-3 monthsSupply Ability : 15 Set/Sets per Year

Quick Information Brand Name: wuxing Place of Origin: China Model Number : WX-07 certification : ISO 9001,CE Description High Quality Gypsum Board Production Line Equipment Introduction of the Equipment Gypsum board production line based configuration table Annual production � Plant area � Drying method Total installed capacity Productin linespeed m/min Requird workers Electrical configuration 1.5 million 60m 26m Thermal oil 116kw 3.0 8 Siemens 2million 70m 26m Thermal oil 127kw 4.2 10 Siemens 3million 84m 30m Thermal oil 166kw 6.25 11 Siemens 4million 110m 30m Thermaloil/Hot stove 210kw 8 11 Siemens 5million 112m 30m Thermaloil/Hot stove 234kw 10.5 11 Siemens 6million 122m 30m Thermaloil/Hot stove 240kw 12.5 11 Siemens 8million 136m 30m Thermaloil/Hot stove 349kw 16.5 11 Siemens 10million 150m 30m Thermaloil/Hot stove 467kw 20 12 Siemens 12million 172m 30m Thermaloil/Hot stove 488kw 24 13 Siemens 15million 204m 36m Thermaloil/Hot stove 578kw 31 15 Siemens 20million 240m 40m Thermaloil/Hot stove 778kw 40 15 Siemens Product specifications length 2400 3000mm width 1200 1220mm thickness 8 15mm Gypsum board production line is the current production of new special equipment for decorative materials, the main work processes include: 1. The plaster and water and various additives, respectively, by automatic metering, automatic delivery system into the mixer, mixing into a gypsum slurry, and evenly sprinkled in the continuous forward movement of the face paper; 2. In the continuous forward while vibrating, the slurry gradually spread evenly, then into the extrusion molding machine and the upper and lower face paper complex, by the extrusion molding pulp is completely covered by the upper and lower skin paper, and extruded into Continuous slurry gypsum board; Annual output: 1.5 million square meters / year -3000 square meters / year 1. Reasonable design, perfect matching, reliable operation; 2. My company has: less investment, fast construction, low operating costs, cost-effective advantages; 3. Set the production line design, manufacture, installation, commissioning, production in one, created a number of elite teams; Service items: 1. My company has a professional installation team, home installation and commissioning, until the production of qualified products so far; 2. Long-term supply of spare parts, equipment warranty for one year The progress of the project construction, project approval, process layout, civil construction, equipment selection, production and installation, production commissioning, trial production stage, the entire process can be completed in 3 to 5 months. Price Delivery Port : Tianjin Packaging & Delivery Packing :wooden box package or null in containersDelivery Lead Time : Finish the order for 1-3 monthsSupply Ability : 15 Set/Sets per Year

1. Type of Production Line Production capacity: 6 million sqm/year (Calculate by 24hrs/day and 300 working days per year) Power: 380V/50Hz; 3 phase Size of boards (L*W):1220mm*1830mm; Size of Finished product (L*W): 600mm*600mm Thickness:6-12 mm Films on front side of board: PVC films Films on back side of board: Aluminum films 3. Description of Machines 3.1Double-Side laminating Machine It includes gluing device,rolling device and flattening device. It can work with two side (front side PVC film, back side aluminum film) at same time, no need to turn it over. It is widely used for coating the surface of density board, multilayer plywood, joinery board, glass, acrylic, mosaic,all kinds of flat plate. 3.2 Dividing and Cutting Machine It includes vertical saw, horizontal saw, conveyor roller way, board-pushing device and so on. It also includes dust collecting system. Easy to operate, can divide and cut board into small pieces simply. With dust collector then make the working environment much cleaner. 3.3 Edge-Sealing Machine PLC and HMI control system, it can produce quickly and stably, with high efficiency; It is the professional edge sealing equipment which makes ceiling tiles. 3.4 Thermoplastic Packing Machine It includes two parts: edge sealing&cutting machine and shrinking machine, the product will be covered films and cut automatically, then go through shrinking machine and finish packing.

Our company manufacturing gypsum plaster board production line, we carry on a large number of transformation and innovation on the basis of imported equipment and domestic equipment, to achieve the automatic mixing, automatic molding, automatic transmission, automatic cutting, automatic panel, automatic shutter, automatic cut edge and so the whole progress of automation. And we can be according to the needs of customers in different production, different configurations of high Container

Our company manufacturing gypsum plaster board production line, we carry on a large number of transformation and innovation on the basis of imported equipment and domestic equipment, to achieve the automatic mixing, automatic molding, automatic transmission, automatic cutting, automatic panel, automatic shutter, automatic cut edge and so the whole progress of automation. And we can be according to the needs of customers in different production, different configurations of high Container