Flat toughened glass is produced by common glass which was cooled suddenly when heated to soft point, the producted compress and stress saner the two side then produce tenile stress make the whole stress balance. Maximum:2440mm*7500nn Niminum:200mm*300mm Thickness:4-19mm.
Main purpose: GX-P series flat glass tempering furnace are mainly used to produce flat tempered glass for architectural purposes, interior decorations, furniture appliances, instrumentation, lamp, etc. Main technical Features: Glass sheet size: Max size 3500 x 12000(mm).Min size 60 X 60(mm): High quality and product: Up to GB9963, GB9656, ECER43, ANSIZ97.1 standards: Broad applicability: Float glass, coated glass, rolled patterned glass; Advanced heating methods: Radiation/convection matrix heating optional with intelligent heating control system: Lower energy wasting: Continue produce and tempering, reduce energy wastering; Easy operation: User-friendly interface, whole produce with auto-control; Full date storage: Computer-stored glass-type parameter recipes for full range of glass types. Suit for sea transportation
This series product is flat glass and bent tempered glass production combined vertical and horizontal steel furnace, mainly for the production of architectural curtain wall, various modes of transport windshield, side windows, shower room, home appliances, with flat or bent tempered glass production. ÐͺÅModel ×î´ó¼Ó¹¤³ß´çMax.Bending Size(mm) ×îС¼Ó¹¤³ß´çMin.Bending Size(mm) ×îС¼Ó¹¤°ë¾¶Min.processing radius(mm) ÇúÂʰ뾶Curvature radius(mm) ºThickness(mm) ²úÁ¿Capacity (batch/h) QYP-H2010 1000¡Á2000 400¡Á300 ¡Ý450 4-12 16 QYP-H2012 1200¡Á2000 400¡Á400 ¡Ý600 4-12 16 QYP-H2410 1000¡Á2440 500¡Á500 ¡Ý450 4-12 16 QYP-H2412 1200¡Á2440 500¡Á500 ¡Ý600 4-12 16 QYP-Z3620 3660¡Á2000 400¡Á400 600 450 4-12 16 QYP-Z3624 3660¡Á2440 400¡Á400 850 350 5-12 16 QYP-Z4224 4220¡Á2440 600¡Á600 850 350 5-12 16. Note: The output of the largest piece of glass in accordance with 5mm single-station production of 100% finished product rate. Flat steel production may refer to the former flat steel-based series, will not produce changes. packing:wooden boxes
Main use: Gx-p series flat glass tempering furnace are mainly used to produce flat tempered glass for architectural purpose, interior decoration, furniture appliances, instrumentation, lamp, etc. Main technical features: Glass sheet size: max size 3500*12000(mm), min size 60*60mm Perfect processing quality: comply with gb9963, gb9656, ecer43, ansiz97.1 standards; Broad glass processing applicability: float glass, coated glass, roddle patterned glass; Advanced heating methods: radiation/convection matrix heating optional with intelligent heating control system; Lower energy consumption: continuous production and tempering, energy saving; Easy operation: user-friendly inteface, self diagnosis, achieving auto-control in whole process Convenient datea storage: mass storage device, applicalbe for industrallized production and management.
JHG tempered glass is from 2-25mm , sizes from 100x100mm to 18000x3300mm . The tempered glass is widely used for fence , furniture ,window, shower door ,curtain wall , floor .
Tempered glass is made from common plate glass which is well treated by special methods, resulting in increasing to a large degree its intensity, capability of anti-impact and quick heat/cold resisting.
JHG offer 3-5mm from 90-98% LT glass with rectangular sizes, shape sizes for greenhouse,hobby glass house. JHG may offer different greenhouse glass items: Tempered low iron glass 91+ Tempered clear glass 89+ Tempered AR glass� 95+ Tempered diffuse glass with 30-75 Haze Greenhouse Glass Advantage: Durability, Glass is the strongest of all greenhouse materials Becautiful Appearance. High light transmission, high UV available Shatter-Resistant
It is processed by controlled thermal or chemical treatments to increase its strength compared with normal glass, about four times stronger than annealed, glass. When broken, tempered glass fractures into small, relatively harmless pieces, it is widen used for window, door, railing, furniture, vehicle.
JHG silk-screen printed glass is one kind of decorative glass made by printing layer of ceramic ink on the surface of glass through the screen mesh for tempering or heat-strengthening process after. As a result silk-screen printed glass is durable, scratch-proof, solar shading and with anti-glare effect. Silk screen glass is widely usded for architecture ,home application ,furniture , auto window shild. Max size 2440*3660mm ,All colour is available .
Products specification: Thickness:3-19mm Max specification: Flat tempered glass: 3000*8000mm min size: 300x300mm Bent tempered glass: 3000*5000mm r=1500mm(minimum) Crate
Flat Tempered Glass: Max 3300*15000mm;Min 85*245mm Bent Tempered Glass: Max 3660*2440mm,Min 600*400mm Min Curvature of Bent Tempered Glass: 1200mm Thickness: 4-19mm Glass Type: Clear,Tint,Patterned,AcidEtched,Ceramic Frit/Silk Screen, Laminated Process: Complete tempered; Heat Strengthened; Heat Soaked, Grind edgework, Polished Edgework/Louvre,Hole, Cutouts Productivity: 1.8 million m2/year PLYWOOD END CAP/CRATE,METAL END CAP,PAPER BOX,A FRAME
Tempered glass owns super strength than normal glass. When it is broken, tempered glass will become oblique bean size granules to reduce damage to human bodies. Tempered glass also withstands quick temperature changes. 1. Flat tempered glass Thickness: 3mm~25mm; maximum size: 1700ºt3000mm and 2400ºt4800mm 2. Bended tempered glass Two sets of excellent quality bended glass equipment to service manufacture. 3. Extra-thin/ ultra-thin tempered glass 2mm to 3.5mm thickness extra-thin tempered glass is workable, and they are our top class products based tamglass. Wood crate
Intex Glass (Xiamen) Co Ltd is a professional glass manufacturer in China with 15 years of experience. We produce tempered glass in 3mm to 19mm thickness for windows, doors, partition walls, shower doors, table tops etc. All of our glass products have found their end use as components in a wide variety of finished products manufactured by our customer base in North America, Europe and Asia. Flat tempered glass' specifications: Max: 2,600mm X 5,000mm Min: 100mm X 300mm Thickness: 3mm~19mm Bend tempered glass' specifications: Max: 2,400mm X 3,660mm Min: 600mm X 400mm Thinckess: 5mm~19mm Radius : 5~6mm radius í¦1,000mm 8~10mm radiusí¦1,500mm 12~19mm radiusí¦2,500mm Packing: Plywood Crates & End cap
Order to meet the durability and safety needs, the glass can be processed by two types heat strengthening or tempering â?? depends on the specific application. For these two types, the glass has undergone a special heat treatment, about 650 Celsius to make it soft, then strong compression and cool processes followed in time to increase its strength and resistance. Compression of 6000 to 9000 psi will make it to be semi tempered glass, about 2 times more resistant than normal annealed glass of similar thickness. And Compression of 11000 to 20000 psi will make it to be fully tempered glass, about 4 or 5 times more resistant than normal annealed glass of similar thickness. This flat tempered glass can help to reduce the chances of injuries as it will be small blunt pieces when breaks. Advantages The flat tempered glass is a kind of prestressed glass actually, in order to improve the strength of glass, we usually use chemical or physical method to form compressive stress in the glass surface. In this way, thereby bearing capacity is raised and this technology enhances glass oneself to resist wind and pressure, cold and heat, impact, and so on. We have a skilled team of more than 10 years' experience, which can always do our best to support our clients sincerely. Applications Usually, flat tempered glass can be used in the following industries: 1.Construction, building templates, decoration industry (example: windows and doors curtain wall interior decoration, etc.) 2.Furniture manufacturing industry (glass tea table furniture of form a complete set, etc.) 3.Home appliance manufacturing industry (TV oven air conditioning products such as refrigerators) 4.Electronics and instruments industry (mobile MP3 MP4 watches and clocks, and other digital products) 5.Automobile manufacturing industry (such as car windshields) 6.Daily products industry (glass cutting board, etc.) 7.Special industry (military USES glass) Specifications Thickness:2~19mm Size: 100X100mm to3300X18000mm Types: clear float glass, ultra-clear float glass, tinted glass, reflective glass, low E, and so on. Packages 1. Cork pad between two sheets 2. Seaworthy wooden crates 3. Iron belt for consolidation
Glorious Future Glass has been dedicated to production and sale of the building safety glass for architecture and residences area, including Low- e glass, insulated glass, coated glass, laminated glass, tempered glass, silk- screen glass, flat- bending and tempering glass, fire- resitant glass, heat soaked glass, locomotive glass, half- mirror, anti- slip glass, shower door glass, pool fencing glass, balustrading glass, skylight glass etc. Product Information Basic Information Product Name Toughened Glass / Tempered Glass Thickness Customized Size Customized Type Large or normal size glass panel Color Customized Packing Safety Sea - worthy Wooden or Plywood packing Delivery Time Shipped within 15 days after receive deposit Payment Term T/T, Western Union, etc Shipping Sea, Air, Express Certification CCC, ISO9001, EN, AS/NZS2208, SGCC, IGCC Application Doors and Windows, Bathroom, Indoor Partition, Daylighting Ceiling, Furniture Glass, Guardrail Glass, Fence Glass Characteristics of Toughened/Tempered Glass Toughened glass compared with equal to the height of float glass, high resistance to bending and impact resistance strength of 4-5 times Not easily broken when we choose, the glass broken into smaller particles obtuse Angle after fragments, won't cause harm to human body Safety glass, which are widely used in mechanical strength and higher security requirements, such as glass door, curtain wall, indoor partition, elevator, showcase, building primary side window, furniture appliances, etc Security, impact strength and thermal stability as well as flat tempered glass, its high wind pressure strength and immunity performance than tempered glass, safety glass Properties of Toughened/Tempered Glass Properties Toughened/Tempered Glass Thermal Shock Resistance Up to 250�°C Mechanical Strength Four to five times stronger than annealed glass Tensile Strength 65 MPa Bending Strength 120 - 200 N/mm2 Surface Compression > 95 MPa Design Stress for Architectural Purposes 50 MPa Fragmentation Small round crystals Conducive for Processing Cannot be cut after Toughening
We can provide various types of flat/bent tempered glass with different substrate(including clear colourless glass,tinted glass,coated glass or patterned glass)according to requirements,such as balustrade glass,window and door glass,bathroom glass,staircase glass,furniture glass,decorative partition glass,desktop glass,automobile glass and furniture glass.The products will have better multiple excellent features after laminating and hollowing processing. If you need to buy tempered glass, please contact me, I will quote you for your reference.
Tempered glass can increase the strength of the glass, increase the original load-bearing capacity of the glass, enhance the original wind pressure and cold and heat resistance of the glass, and have a higher impact, and when the toughened glass is broken, it will hurt us. Compared with the damage caused by ordinary glass, it is much less dangerous, and there are more buyers who use tempered glass because it is practical and beautiful. The company specializes in the production of explosion-proof tempered glass, which can produce any size and thickness, welcome to consult and customize. Product Specification Maximum specification of flat tempered glass: 3600 18000 mm; Minimum specification : 85 245 mm Maximum specification of bent tempered glass: 3600 18000 mm; Minimum specification :600 300 mm Bent tempered glass minimum curvature radius:R 450 mm Thickness range: 3-25 mm Output:1.80 million square meters / year Executive Technical and Quality Standards Complying with European standard: EN12150-2:2004 Australian standard:AS/NZS 2208-1996 Complying with American standard: ANSI Z97.1-2004 Chinese standard: GB15763.2-2005 Our company has always selected high-quality materials and strive to provide customers with better products.The products meet national quality standards. Export to all over the world. Timely delivery without delay. Provide you with real-time quotes.
In modern architecture becomes more popular the translucent constructions of the complex architectural forms. Cities look defines, in many aspects, the elegant systems of the high-rise building facades glass cover. Nowadays it is very difficult to find such building material as bent tempered glass, which would be so suitable for decision of the modern construction types. Tempered glass constitutes flat glass, subjected special thermal treatment tempering, in result of witch in glass volume arise naturally distributed internal tensions, witch enlarge mechanical glass strength and provide special (safe) character of its destruction. Increase of mechanical strength (while bend can reach 250 mpa that is five times higher than in usual flat glass) stipulates increase of glass thermal resistance in 3-4 times (since 40 till 180 0c). Flat glass has thermal resistance by 40 0c, tempered glass by 180 0c, that prevents tempered glass from destruction while overheating and temperature difference. It is very important while using in external glass cover by toned and reflex glasses with absorption factor of thermal energy more than 25 %, when glass can get hot till 90 0c. In europe, lately, is widely spread the use of tempered glass with the purpose of safety, longevity and reliability. Bent tempered glass almost does not differ from tempered flat glass, the difference becomes apparent only on the final stage of the process. Glass after heating section comes to tempering section, where in a short period of time flat glass bends by the forming rollers. The forming rollers are usually set according to the radii models and forms. USE: Structural flat glass cover of buildings façades Shops and supermarkets windows Partitions in apartments and offices Glass doors Saunas doors (tempered glass stands perfectly heat strokes) Stairs and parapet fences Roofs, roof visors Winter gardens building Electric and gas ovens doors Escalators side supporting planes. Our company can offer: Tempering of clear float glass, thickness: from 4 till 19 mm Tempering of toned on the whole glass Tempering of reflex (sun protective) glass.
Tempered working: Flat tempered glass Edge work: Flat edge and polished Corner work: Polished corner Colors: Black, red and white Size: 740 x 420 x 6mm ODM/OEM orders are welcome Customer's designs are available RoHS standards. Wooden box
Tempered and Soaked Glass Security: It will not hurt people after breaking to pieces,the self-beak rate is lower than 0.1%. High intensity: It has 4 to 5 times strength than float glass Hot Stability: It has good hot stability, which can endure 3 times temperature than float glass, also can endure changing of above 200C. Thickness: 3-19mm Max specification: Flat tempered glass 3000*8000mm; Bent tempered glass 3000*5000mm R=1500mm. Packing: Sea worthy wooden cases with interlayer paper.
