Tempered glass can increase the strength of the glass, increase the original load-bearing capacity of the glass, enhance the original wind pressure and cold and heat resistance of the glass, and have a higher impact, and when the toughened glass is broken, it will hurt us. Compared with the damage caused by ordinary glass, it is much less dangerous, and there are more buyers who use tempered glass because it is practical and beautiful. The company specializes in the production of explosion-proof tempered glass, which can produce any size and thickness, welcome to consult and customize. Product Specification Maximum specification of flat tempered glass: 3600 18000 mm; Minimum specification : 85 245 mm Maximum specification of bent tempered glass: 3600 18000 mm; Minimum specification :600 300 mm Bent tempered glass minimum curvature radius:R 450 mm Thickness range: 3-25 mm Output:1.80 million square meters / year Executive Technical and Quality Standards Complying with European standard: EN12150-2:2004 Australian standard:AS/NZS 2208-1996 Complying with American standard: ANSI Z97.1-2004 Chinese standard: GB15763.2-2005 Our company has always selected high-quality materials and strive to provide customers with better products.The products meet national quality standards. Export to all over the world. Timely delivery without delay. Provide you with real-time quotes.
Tempered glass is manufactured through heating the ordinary glass near to the softening point and then quenching it which to let the glass has a strong permanent internal stress,while the inner layer of the tensile stress and the outer layer of the stress in a stable state of stress balance. Thereby enhanced the use of glass strength and weight-carrying capacity, and enhanced the glass's own wind pressure, cold and heat, impact and so on. With high strength and strong thermal stability, tempered glass can be widely used in places where required high mechanical strength and safety , such as: glass curtain wall, building windows and doors, balcony rails, pool railings, shower room, home, staircase handrails, office interior partition, insides of buildings where has high density of human and easy touched area such as doors and windows, curtain walls, cars, trains, ships, and places affected by temperature differences that may cause damage to the human body. Product Content Description: Tempered glass/tempered glass/tempered glass-high performance, high quality, far away from danger. High-quality materials and rigorous technology have further improved the safety, stability, pressure and impact resistance of the glass. This is why tempered glass can be used in places with demanding requirements such as glass curtain walls, escalator railing glass, shower rooms, stadiums, automobiles, trains and ships. Various shapes of products can be freely chosen. Customization is also welcome. Production Capacity Maximum specification of flat tempered glass:3660 18000 mm Minimum specification:85 245 mm Maximum specification of bent tempered glass:3660 18000 mm Minimum specification:600 300 mm Minimum curvature radius:R 450 mm Thickness range:3-25 mm Output :1.80 million square meters/year Any more questions,please let me know. We will answer you in detail. Provide you with real-time quotes. Export to any region of the world. In line with national quality standards. Customized for different needs are also welcome. Thanks for your consideration.
Tempered laminated glass, also known as toughened laminated glass, is a kind of laminated glass. It is a composite of two or more ordinary float glass after tempering. The middle layer is mostly PVB film (scientific name polyvinyl butyral), which is a kind of safety glass that bonds two or more layers of glass together through a special process of heating and high pressure. Production Capacity Maximum specification: 3600 18000 mm; Minimum specification:300 300 mm PVB film thickness:0.38 mm, 0.76 mm, 1.14 mm, 1.52 mm and 2.28 mm; Total thickness of laminated glass: 2.78 100 mm; Output: 2.5 million square meters year Orders out of above specifications are negotiable. In line with quality standards all over the world. Customized for different needs are also welcome. Provide you with real-time quotes. Export to all over the world. Any more questions,please let me know. Welcome to consult and customize.
Laminated glass is a composite glass product composed of two or more pieces of glass which are bonded firmly with transparent adhesive film. Laminated glass is characterized by excellent shock resistance and penetration resistance. Generally speaking, when it is shocked and broken, it will not be penetrated by the external subjects, and the glass fragments will not fly away from the inter-layer, and thus it can provide security. The commonly used inter-layer films included PVB, SGP, EVA. Glass substrate, which can be float glass, tempered glass, anti-solar glass, solar control glass, coated glass (LOW-E) patterned glass or self-cleaning glass, and a variety of colored adhesive inter-layer film (PVB) compose of beautiful and multifunctional flat or bent laminated glass. With the properties of excellent light control, heat insulation, acoustic insulation, noise reduction, ballistic protection, burglar prevention and resistance to static pressure, our products can be widely applied to curtain walls, balusters, doors, windows, shower bathrooms, awnings, sunroom roofs, staircases, counters, interior decoration, hotels, banks, airports, furniture, military facilities and other industries and fields. Production Capacity: Maximum specification: 3600 18000 mm Minimum specification:300 300 mm PVB film thickness: 0.38 mm, 0.76 mm, 1.14 mm, 1.52 mm and 2.28 mm Total thickness of laminated glass:2.78 100 mm Output: 2.5 million square meters /year Orders out of above specifications are negotiable. Export to around the world. In line with national quality standards. Customized for different needs are also welcome. Any questions,please contact me. W can answer you in detail. Provide you with real-time quotes. At your service.
Adding a small amount of colorants, such as iron oxide, cobalt oxide, selenium, etc., to the float batch material can produce bulk colored glass. Compared with transparent float glass, it can absorb more solar radiant heat, thereby reducing infrared, visible light and transmission from the outside, reducing the energy consumption of indoor air conditioning. Features: 1. High transmittance of color finding 2. Absorb solar radiation, heat insulation and energy saving 3. Make the building more beautiful 4. Can be used as substrates for various composite products Production Capacity: Maximum specification: 2440 3660mm Minimum specification: 1220 1830mm Thickness: 4 15mm Output: 12 million tons year Orders out of above specifications are negotiable. Technical and quality standards: Complying with Europe standard: BS EN 572-2 Australia standard: AS/NZS 2208-1996 United State standard: ASTM C 1036 Chinese standard: GB 116141999 This product offers a variety of colors for you to choose. Export to any part of the world. Timely delivery without delay. Welcome to consult and customize. Provide you with real-time quotes.
Colored laminated glass is also called colored laminated safety glass, which is a strong PVB (vinyl polymer butyrate) film sandwiched between two or more pieces of float glass, which is pressed by a hot press to exhaust the air as much as possible. Then put it into a high-pressure steam engine to use high temperature and high pressure to dissolve the remaining small amount of air into the colored glass made of glue film. Production Capacity: Maximum specification:3600 18000 mm Minimum specification:300 300 mm PVB film thickness:0.38 mm, 0.76 mm, 1.14 mm, 1.52 mm and 2.28 mm Total thickness of laminated glass: 2.78~100 mm Output: 2.5 million meters year Orders out of above specifications are negotiable. Our company has always selected high-quality materials,and strive to provide customers with best products and perfect after-sale service. Export to all over the world. In line with national quality standards. Welcome to consult and customize. We can provide you with real-time quotes or some samples for your reference. Thanks for your consideration.
Hot-bent glass is a product that heats the glass to close to the softening point and makes the glass have a non-planar shape that is naturally cooled through various specific molds. Production Capacity Maximum specification:3660 18000 mm Minimum specification:600 300 mm Minimum curvature radius:R 450 mm Thickness range:3-25 mm Output :1.80 million square meters/year Any more questions,please let me know. We can introduce our products to you and provide you with real-time quotes. Export to all over the world. Complying with quality standards around the world. Beauty and safety. Customized for different needs are also welcome. Always at your service. Wish to cooperate with you.
Frosted glass is a semi-transparent glass whose surface is treated with ordinary flat glass by mechanical sandblasting, manual grinding (such as emery grinding) or chemical treatment (such as hydrofluoric acid dissolution). Generally used on doors and windows in offices and bathrooms, as well as glass in other rooms. The company is a comprehensive glass production enterprise. We can produce various specifications of glass. Our products can be exported to any region of the world. Due to excellent location,we can also promise timely delivery according to your schedule. Any questions, welcome to consult and customize. Provide you with real-time quotes. Export to all over the world.
Hot bending glass is a product that heats the glass to close to the softening point and makes the glass have a non-planar shape with natural cooling through various specific molds. Our company has always selected high-quality materials,and strive to provide customers with better products.If necessary,we can also provide some samples for your reference. For our products,we can promise that: Complying with quality standards all over the world. Any size, any thickness. Extremely favorable products, perfect after-sale service Well-equipped and advanced devices, experienced staff. Bespoke products. Welcome to consult and customize. We can provide you with real-time quotes. Looking forward to working with you. Export to all over the world. Timely delivery without delay.
Bulletproof glass usually includes a polycarbonate fiber layer sandwiched between ordinary glass layers. Bullets can easily penetrate the outer layer of glass, but the strong polycarbonate layer will stop the movement of the bullet before it can penetrate the inner layer of glass. Bulletproof glass is usually 70 to 75 mm thick. Production Capacity Maximum specification:2440 3660 mm; Minimum specification: 300 300 mm Thickness:4 75 mm; Orders out of above specifications are negotiable. Adhering to the principle of Customer first,mutual benefit and win-win ,we will provide you with quality products and perfect after-sale service. Export to any region of the world. In line with national quality standards. Well rated by customers. If necessary, please contact me. Provide you with real-time quotes.