Find Verified Filler Masterbatches Suppliers, Manufacturers and Wholesalers

Dai A Industry supplies calcium carbonate Filler Masterbatch developed for plastic film, injection molding, extrusion and other polymer processing applications.

The product is formulated with selected calcium carbonate, polymer carrier resin and processing additives to support good dispersion, stable processing and consistent product quality.

Filler Masterbatch can help manufacturers optimize material formulation and adjust selected product properties when used at a suitable dosage for the intended application.

Key benefits:

Good calcium carbonate dispersion
Stable processing performance
Consistent pellet quality
Suitable for PE- and PP-based applications
Different calcium carbonate content and carrier systems available
Customized grades according to processing method
Technical support for dosage evaluation and production trials

Applications may include blown film, shopping bags, garbage bags, woven sacks, non-woven products, injection-molded products, extrusion, sheets and selected packaging applications.

The recommended dosage depends on the base polymer, processing conditions, finished-product requirements and filler masterbatch grade. Please provide your application, base resin, product thickness and required performance for product recommendation.

Packaging: 25 kg PE laminated woven bags or customized packaging upon request.
Country of origin: Vietnam.
Final quotation depends on grade, formulation, order quantity and delivery terms.

Our filler masterbatch is a combination of the purest materials and technology, it gives customers not only cost-effective solutions, but also high-quality finished products.

The CaCO3 and talc grades used in our filler masterbatches are of excellent quality allowing much higher loading compared to conventional filler masterbatches.

Its Applications areas are:
Raffia Tape
PE Carry/Shopping bags
Blow Molding
Injection Molding
Tarpaulin
Strapping

Our PP based filler masterbatch is a combination of the purest materials and technology, it gives customers not only cost-effective solutions, but also high-quality finished products.
Filler Masterbatch PP is a type of filler masterbatch containing 70-85% super fine Calcium Carbonate in the basic Polyolefin.

Color Filler Masterbatch

Color Filler Masterbatch

Color Filler Masterbatch

Color Filler Masterbatch

Color Filler Masterbatch

Key Specifications/Special Features: CaCO3 filler masterbatch with PE/PP/PS/EVA,... based, CaCO3 content from 70~90%, good application on plastic packaging industries

This product contains ultrafine grinded calcium carbonate, PP Resin and processing additives. Calcium carbonate made natural mineral calcite with high pure over 99 %, high whiteness > 96 %, treatment surface by additive and use perfect technology
Applications:
PP raffia, PP woven sack, FIBC
PP Injection molding, PP thermoforming, etc
PP Extrusion: PP pipes, PP sheet, PP recycling compounds etc
Other PP applications

This product contains ultrafine grinded calcium carbonate, resin and processing additives. Calcium carbonate made natural mineral calcite with high pure over 99 %, high whiteness > 96 %, treatment surface by additive and use perfect technology
Applications:
PE film extrusion: Agricultural film, Tshirt bag, supermarket bags, carry bags, garbage bags etc
HDPE Blown molding: Cans, Drums etc
HDPE Extrusion: Pipes, etc

NHAT HUY GROUP - the leading manufacturer and exporter of COLOR & CACO3 FILLER MASTERBATCH in Vietnam.
Product quality and customer satisfaction are our first priority.
=> Competitive Prices
=> High stably quality: Thanks to the advantages of owning both CaCO3 factories & CaCO3 Filler factories, we are fully control both materials & management cost, so that we always offer best to Customers
=> Cut down production costs: CaCO3 masterbatch is much cheaper than other materials (PE, PP,.. resin). With high dosing rate 20 - 60%, you are able to save significant materials cost.
We are looking for a partner & distributor in many countries!

PP Filler Masterbatch HP201A
* HP201A is the filler for PP plastic. It allows high-ratio consumtion. That's why HP201A can help to reduce hugely production cost while still keep your plastic products at high-quality grade
* HP201A cause low dust-emission so it help to improve the production environment

* Mixture with HP201A cause only a weak frictional force to worm-screw. As the result the pressure on screen is kept at low-grade. That extends the life of worm-screw and screen as well as other involved parts of your equipment

* HP201A is a balanced additive. Using HP201A, manufacturer can make products with high elongation and high tensile grade while still keeping the considerably low cost. HP201A is suitable for high-speed fiber machine

* HP201A help to push your products into designed shape easier and more shortly without losing its shape

* No moisture absorber needed for your material mixture if using HP201A as the filler

APPLICATION
This kind of master batches is used for different applications such as: packaging of animal feed, fertilizer, agricultural products, particularly it is also used in production of cement package (KP, KPK), air conditioning cabinet, houseware plastic products ...

* HP203A is a filler masterbatch for PP plastic manufacture. It allows high-ratio consumption. That's why it can help to reduce production cost greatly while still keep your products at high quality grade

* Causing low dust-emission, HP203A help to improve your production environment

* Mixture with HP203A cause only a weak frictional force to worm-screw. As the result the pressure on screen is kept at low-grade. That extends the lifespan of worm-screw and screen as well as other involved parts of your equipment

* HP203A help to push your products into the designed shape easier and more shortly without losing its shape

* Using HP203A as the filler you don't need moisture absorber for your material mixture

PE Filler Masterbatch HP102
* HP102 is a PE plastic filler which allows high-ratio consumption. It help to reduce hugely production cost while still keep your plastic products at high-quality grade
* In manufacturing plastic bags, using HP102 would make your products tougher than using additive from almost other producers. It also gives your product a glossy surface. HP102 especially is suitable for products with porcelaine-white color.

* Mixture with HP102 cause only a weak frictional force to worm-screw. As the result the pressure on screen is kept at low-grade. That extend the life of worm-screw and screen as well as other involved parts of your equipment

* No moisture absorber needed. If the rate of consumption is below 50%, HP102 should be put into production straight away. If the rate is 50% or upper, HP102 should be dried briefly before using.

APPLICATION
Used in manufacturing PE plastic products such as shopping bags, tarpaulin cloth ... especially products with porcelain-white color.

PP Filler Masterbatch HP202A
* HP202A is a filler masterbatch for PP, ABS plastic production. It allows high-ratio usage. That's why It can help to reduce production cost greatly while still keep your products at high quality grade

* Causing low dust-emission, HP202A help to improve your production environment

* Mixture with HP202A cause only a weak frictional force to worm-screw. As the result the pressure on screen is kept at low-grade. That extends the lifespan of worm-screw and screen as well as other involved parts of your equipment

* HP202A help to push your products into the designed shape easier and more shortly without losing its shape

* Using HP202A as the filler you don't need moisture absorber for your material mixture

APPLICATIONS

Used in different plastic product manufactures such as: food package, cement package (KP, KPK), houseware plastic products.

PP Filler Masterbatch HP201S
* HP201S is a filler masterbatch for PP plastic. It allows high-rate usage. That's why It help to reduce hugely production cost while still keeping your plastic end product at high-quality grade
* HP201S cause low dust-emission

* Mixture with HP201S cause only a weak frictional force to worm-screw. As the result the pressure on screen is kept at low-grade. That extends the life of worm-screw and screen as well as other involved parts of your equipment

* HP201S is a balanced additive. Using HP201S, manufacturer can make products with high tensile and moderate elongation grade while still keeping the considerably low cost. Especially, HP201S is suitable for UV-resistance products and high-speed fiber machine.

* No moisture absorber needed for your material mixture if using HP201S as the filler

APPLICATION
HP201S is used for different applications such as: packaging of animal feed, fertilizer, agricultural products, particularly it is also used in production of Jumbo bags, cement package (KP, KPK) and other high quality products.

PE Filler Masterbatch HP101
* HP101 is a PE plastic filler which allows high-ratio consumption. It help to reduce hugely production cost while still keep your plastic products at high-quality grade

* In manufacturing plastic bags, using HP101 would make your products tougher, more transparent than using additive from almost other producers. It also gives your product a glossy surface. HP101 is suitable for high standard products

* Mixture with HP101 cause only a weak frictional force to worm-screw. As the result the pressure on screen is kept at low-grade. That extends the life of worm-screw and screen as well as other involved parts of yourequipment

* No moisture absorber needed. If the rate of consumption is below 50%, HP101 should be put into production straight away. If the rate is 50% or upper, HP101 should be dried briefly before using.

APPLICATION

Used in manufacturing PE plastic products such as shopping bags, liner bags, PE film ...

BOPP Coating Filler Masterbatch HPCTG
* As the filler masterbatch for PP plastics. Allowing high-rate usage, HPCTG helps to reduce production cost while still keep your plastic products at high-quality grade

* Mixture with HPCTG cause only a weak frictional force to worm-screw. As the result the pressure on screen is kept at low degree. That extends the life of worm-screw and screen as well as other involved parts of your equipment

* No moisture absorber needed for your material mixture if using HPCTG as the filler.

APPLICATION

Built for BOPP package manufacture

Non-woven Fabric Filler Masterbatch HPPPS
* This PP filler masterbatch is built for non-woven fabric manufacture. HPPPS allows high-rate usage so it can help to maximize cost reduction.

* Mixture with HPPPS cause only a weak frictional force to worm-screw. As the result the pressure on screen is kept at low-grade. That extends the life of worm-screw and screen as well as other involved parts of your equipment

* HPPPS help to make non-woven fabric with smoothy surface, high tensile strength and moderate elongation

* No moisture absorber needed for your material mixture if using HPPPS as the filler.

APPLICATION
Used in non-woven fabric manufacture

Coated Calcium Carbonate Powder (CaCO3 Powder)
Whiteness (%): L* >= 98

Applications: Filler Masterbatch, PVC Compound, PVC Cables, Plastic films, Paints, Paper, Rubber Items, Adhesives, PVC Pipes, Plastic Sheets, Ceramic Tiles.

Natural Calcium Carbonate Powder (CaCO3 Powder)
Whiteness (%): L* 98

Applications: Filler Masterbatch, PVC Compound, PVC Cables, Plastic films, Paints, Paper, Rubber Items, Adhesives, PVC Pipes, Plastic Sheets, Ceramic Tiles.

G-FINE ULTRAFINE is a new generation Supplementary Cementitious material (SCM) with a built-in high tech content. It is processed based on high glass content with high reactivity obtained through the process of controlled granulation process results in unique particle size distribution. The raw materials are composed primarily of low calcium silicate based mineral additives.

Its latent hydraulic property and pozzolanic reactivity results in an enhanced hydration process. Addition of G-FINE improves the packing density of the paste component. In spite of its high fineness the results are in lowering water demand, admixture dosage and hence improving strength and durability parameters of concrete at all ages.

G-FINETM are observed in the concrete mix design, the initial rate of strength development was found to be increased or similar as other pozzolanic materials.

Application

Roads, Residential, Commercial structures
Producing mass concrete for raft and pile foundations
Low water to binder rations for high performance concrete
Better retention of workability and faster initial strength gain
High Strength construction work in low or high temperature weather

Benefits



�· Increase compressive strength ,permeability, workability of concrete
�· Improves the durability of concrete

�· It can be used in waterproofing as an additive

�· It can decrease the heat of hydration

�·Resistance against saltwater & chemicals

�· Non-Toxic, Eco friendly

�· Cost effective, economical solutionDOSAGE These goals are accomplished using cement pastes, mortars, and concretes with water-Cementitious material ratios ranging from dosage: 5% to 10% .The segregation of cement paste is caused by high super plasticizer dosages that do not cause segregation of concrete with the same water-Cementitious material ratio. Concrete containing G-FINETMas a partial replacement for cement exhibits an increased compressive strength because of the improved strength of its cement paste constituent. Changes in the paste-aggregate interface caused by silica fume appear to have little effect on the uniaxial compressive strength of concrete.PACKAGINGS G-FINE shall be packed and supplied in 25 Kg plastic bags/Customized packing is done if required in G-Fine brand. It is also available in Bulk Jumbo bags. STORAGE G-FINE when stored correctly has an indefinite shelf life. Like cement,G-FINE must be protected from contamination and moisture. The product can be stored in bulk in a clean, dry storage silo.SAFETY INFORMATION / DECLARATION
Extensive testing has shown G-FINE to be non-toxic and environmentally friendly. No known significant health risks are associated with G-FINE but high concentrations of dust may cause irritation. It is recommended that suitable Protective clothing, gloves and eye/face protection is worn. In case of contact with eyes, rinse immediately with plenty of clean water an

White masterbatch 70% loading tio2 pure grade with high gloss with smoth process.

Origin: Canada
Code: 20261931BN
Material: HDPE purges from masterbatch 20-100 melt
Category: HDPE
Type: purges from masterbatch
Quantity: 40 Tons
Loading weight: 20 Tons
Specification:
HDPE purges from masterbatch with 20-100 melt and has talc power in some boxes (Around 20%)

Thanks for contacting us!
We are selling CFR term, Incoterms 2020. Payment term: 50% advance, balance against copy Bill of Lading
Could you please give us more details about your company and demand for us to offer you the suitable material?

1.What is your company name and address?
2.Have you imported this material before?
3.If yes, which is your port of destination and HS code which you use to import this material?
4.How many tons do you need per month?
5.Which grade and color are you looking for?
6.Do you prefer us to contact you via email or whatsapp, wechat, skype,..?

Our production range is Color, Black / White, Filler, Functional Masterbatch from our factory in Korea, Vietnam and China.

We are proud that our products meet demands of several sensitive colors and that they are sub-divided with wide range of choice.

* The adhesion promoters that are used to produce stretch wrap films from LLPDE or LDPE are the PIB master batches. They also act as a cling agent and they contain high molecular weight Polyisobutylene content in the base polyethylene and these matrices will help you to achieve the high end stickiness feature in dry granules.

* The dry free flow granules PIB Master Batches are available in a granule form and they are much easier to handle against imposing the direct dosage of Polyisobutylene liquid. The reason behind this is this feature is that it is very difficult to handle because of its high viscosity property. VRNG Exim Industry proffers the best Polyisobutylene additive which is sourced from the leading manufacturers. You can distribute our additive uniformly over the film and thereby bringing in the strength and tackiness properties to the film that is applied over. You can attain high self-adhesive properties and this will help you to cover packages with perfect grip and strength

Be of advantage to industries as:
PIB Master Batches are designed to produce stretch wrap films from LLDPE, LDPE or any other Nonslip Polyolefin for imparting into the applications of Pallet wrap and Silage wrap. It can be used on either blown film line or cast film process

Polymers for making plastic bags -
CaCo3 filler masterbatch
Color Masterbatch


Please price and specification please contact us.

The higher thermal conductivity and lower specific heat of calcium carbonate are key advantages in molding applications. In injection molding and blow molding operations, cycle time, stiffness and impact resistance will be favorably improved, leading to cost savings.

Calcium carbonate masterbatches has become important for many products made out of polyethylene films, such as bags and sacks. Sungbo Calcium carbonate masterbatches specially developed to be incorporated into polyethylene blown film improves both productivity and physical properties

Sungbo filler masterbatches are concentrates of Calcium carbonate (CaCO3) in a polymer base. They offer a convenient way of incorporating CaCO3 in thermoplastics, without contamination by dust. They have perfect dispersion and optimized flow properties, ensuring easy processing.

ADVANTAGES
The higher thermal conductivity and lower specific heat of calcium carbonate are key advantages in sheet and yarn applications. Cycle time, stiffness and impact resistance will be favorably improved, leading to cost savings.

Yarn Extrusion
Calcium carbonate is conventionally used in PE or PP woven bags, and bands to offer anti-splitting and anti-fibrillation effects.

Sungbo filler masterbatches offer:
-Increased stiffness,
-Reduced delustering,
-Reduced raw material consumption

Hi-Lene SBPS.

Masterbatch is a concentrated mixture of pigments and/or additives encapsulated during a heat process into a carrier resin which is then cooled and cut into a granular shape. Masterbatch allows the processor to color raw polymer economically during the plastics manufacturing process.

Masterbatch (MB) is a solid additive for plastic used for coloring plastics (color masterbatch) or imparting other properties to plastics (additive masterbatch). A liquid dosage form is called liquid color.

Vinayak Associates offers a comprehensive range of white Masterbatch which provide high opacity & maximum whiteness into plastic products. It is a compound of Titanium Dioxide (Tio2), polymer carrier and other additives.

The main benefits of White Masterbatch to plastic product properties are-

Enhances the opacity and whiteness
Plays the role of UV Protection.
Improves heat resistance.
Suitable for thin film application.
Enhance the resistance of weather.
Anti â?? fibrillation for the woven sack.
High thermal stability under processing conditions reduces the agglomeration of Tio2.
Application of White Masterbatch is-

Films require very high opacity.
Thin gauge films
Multi-layer or Mano layer films.
LLDPE & Metalbocene LLDPE rich films
Silage, Mulch & Non-Woven Fabrics
Textile & Fibers
Extrusion Coating Films
Injection Molding, Blow Molding & Roto-Molding.
Lamination & Metallization
High Output Machines

Masterbatches

A masterbatch is a concentrated mixture of pigments or additives that are used in the plastics industry to color or enhance the properties of plastic products. It is a cost-effective and efficient way to introduce colorants, UV stabilizers, flame retardants, and other additives into plastics during the manufacturing process. Masterbatches are typically in the form of small pellets or granules that can be easily mixed with the base plastic resin, resulting in a consistent and uniform color or modification throughout the final plastic product. They play a vital role in achieving desired visual and performance characteristics in a wide range of plastic applications, from packaging materials to automotive components and consumer goods.

Standard

Calcium Carbonate (CaCO3) content: ASTM D 5630; by weight (%): 82+ 1.5
MFR (5 kg/190 oC)ASTM D 1238 (g/10 mins): 15 + 5
Melt Temperature DSC oC: 120
Density TCVN 4195: 2012 (g/cm3): 2.19 + 0.05
Bulk density: ASTM D1895 (g/cm3): 1.34 + 0.1
Particle size of CaCO3 Powder: Malvern �µm 6
Water Content: ASTM D 644 by weight (%): <0.15

Packed : 25 KGs PE bag/ 25 MT/ 20 feet container

Joint Filler

Filler Cord

10L Bucket Packing

Luxes Wall Filler Interior is a high quality water based coating. The product is an acrylic based, blended with specially graded finest fillers and ingredients.

Product Description :
Fillers are the perfect complement for adding color and interest to a bouquet, the can be green or colored. They are normally to be used in arrangements with Fresh Cut flowers

Price of product ( USD price or FOB price) :
Prices vary according to the type of filler requested

Product origin :
Springalways wide varieties of Fillers are grown in Colombia and Ecuador

Key Specifications/Special Features :
Most common fillers are: Limonium, Solidago, Bells of Ireland, Delpinium, Molucella, Tree Fern, Leather fern Dusty Miller, Daisies, Baby Breath, Plumosa,eucalyptus, Lemon Leaf , Ruscus, Myrtle, among many others. Fillers should be ordered with blooms showing good colour but with no more than 20 % open blooms. Foliage must be dark green and free of blackening.

Minimum Order Size and Packgaing details :
Packing Commonly by 10 stems per Bunch but always depending on the filler.Minimum 1qb

Description :
PS-202 PVC Pipe Cement Heavy Duty is a premium grade, high viscosity and clear color adhesive for PVC articles bonding applications. It is an easy-to-apply, fast setting and extra strength formulation. Suitable for waterproof bonding and coupling of rigid PVC, uPVC, cPVC and ABS pipes and fittings, cable conduits, gutters, sewer, drain, waste and vent systems, turf, irrigation and pressure pipe applications. It is safe for drinking water pipes upon complete curing.

Model:
PS-202 PVC Pipe Cement Heavy Duty

Product Grade: As per Client Requirement (MS/SS, etc)
Minimum and Maximum Price: As per Request
Price Units: USD
Incoterms: As per Mutual Understanding with Buyer
Product Origin: India
HS Code: Provided as per product
Minimum Order Size: NO MOQ (We can cater small quantities also)
Packaging Details: For Export Material (Export Quality Wooden Box)

Applicable materials: PC, PC/ABS, PA, PP, ABS and other materials, the addition amount is 10-15%, the surface resistance is 10 to the 7th power to 10 to the 10th power

Fully automatic chemical plant production.It is suitable for injection molding products such as PP. PE, with high blackness and good dispersibility.

Aries Polychem is Most Advanced manufacturer of Black Master batch from India.

Aires's have 6 Production facilities at Ahmadabad India, with production capacity of 1000 MT per Month.

We are Specialised In Black Master batch Only

Black Master batch :- PE / PP / ABS / SAN / PET / NYLON / PC

Specifications

Type : Polymer Masterbatch
Material : Abs, Hdpe Plastic, Ldpe Plastic, Pp
Application : Indusrtial Use
Color : Multicolor
Packaging size : 1kg, 500gm
Packaghing Type ; Packet
Features
Easy to use,
Crack resistance