Fiberglass Push Pull Tracing Duct Rods Suppliers and Manufacturers

Propertyvalue Model specification4.5mm, 6mm, 8mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mmfor your choice, and we can also accept oem order Length30, 50, 60, 80, 100, 120, 150, 180, 200, 250, 300, 350, 400, 450, 500 meters for choice. Materialfiberglass (inner) and high density polytgtkebe(outer) Density>1.9gr/cm3 Working temperature- 40 to + 80 Minimum pulling strength4000 n¡¡ï¿½ï¿½¡ï¿½ï¿½5% Tensile modulus>46.500mpa Consistency of rod137gr/m Flexural modulus>46.500mpa Elongation at break2.5-3% Min. Bending radius388m Tensile strength>15n/mm2 Environmental stress & crack resistance>1000hr Our duct rodders lineup includes detectable duct rodders, non detectable duct rodders, cobra duct rodders, python duct rodders and mini-cobra duct rodders by manufacture such as jameson, dcd, condux and gmp tools. Condux duct rodders: Carton

Description: Duct rodders applies in tow lead-rope through a pipe, it is auxiliary means. Surface smooth and high resilience, so the d underground duct 4. Rugged tubular steel reel with adjustable position. 5. Feed device allows rod to feed out or be wound back onto reel with easy pushi or pull of rod. 6. Duct rods/duct rodders have many applications, not only pulling the cable but also pulling 7. Anticorrosion , good elasticity , long working life. Fiberglass push pull, tracing duct rods, duct rodder--bazhou deli power tools Box

k onto reel with easy pushi or pull of rod. 6. Duct rods/duct rodders have many applications, not only pulling the cable but also pulling 7. Anticorrosion , good elasticity , long working life. Fiberglass push pull, tracing duct rods, duct rodder--bazhou deli power tools Box

5. Feed device allows rod to feed out or be wound back onto reel with easy pushi or pull of rod. 6. Duct rods/duct rodders have many applications, not only pulling the cable but also pulling 7. Anticorrosion , good elasticity , long working life. Fiberglass push pull, tracing duct rods, duct rodder--bazhou deli power tools Box

l joint, penetrates in the pipeline. When cleaning, guide-head will drive cleaning tools to clean the pipe;when arranges the cable, you may first leads the steel wire or the iron wire, then enters the pipe with the steel wire or the iron wire hauling cable Fiberglass duct rodder features&benefits: 1. Strong non-conductive fiberglass rod construction 2. Stainless steel drawing head 3. For longer conduit runs and underground duct 4. Rugged tubular steel reel with adjustable position. 5. Feed device allows rod to feed out or be wound back onto reel with easy pushi or pull of rod. 6. Duct rods/duct rodders have many applications, not only pulling the cable but also pulling 7. Anticorrosion , good elasticity , long working life. Fiberglass push pull, tracing duct rods, duct rodder--bazhou deli power tools Box

Description: Duct rodders applies in tow lead-rope through a pipe, it is auxiliary means. Surface smooth and high resilience, so the frp perforator with ease passes the narrow channel. Perforator consists of two parts: the glass fiber strengthen the level, the high-pressured low density polyethylene protective layer(smooth, firm , can resist the adverse circumstance).Duct rodders has time-saving reducing effort, improving efficiency, etc, and can be used for telecom cables, cable pipe and cleaning and plastic pipe of cloths to put.When use draws out the fpr pole by the pulley, then with a corresponding metal joint, penetrates in the pipeline. When cleaning, guide-head will drive cleaning tools to clean the pipe;when arranges the cable, you may first leads the steel wire or the iron wire, then enters the pipe with the steel wire or the iron wire hauling cable Fiberglass duct rodder features&benefits: 1. Strong non-conductive fiberglass rod construction 2. Stainless steel drawing head 3. For longer conduit runs and underground duct 4. Rugged tubular steel reel with adjustable position. 5. Feed device allows rod to feed out or be wound back onto reel with easy pushi or pull of rod. 6. Duct rods/duct rodders have many applications, not only pulling the cable but also pulling 7. Anticorrosion , good elasticity , long working life. Fiberglass push pull, tracing duct rods, duct rodder--bazhou deli power tools Box

Fiberglass duct rodder Duct rodder is composed of fiberglass rod which is extruded by fiber glass rod and high strength resin at high temperature. This type of rod has high tensile strength and flexibility. It is covered by a high density polyethylene engineering plastic as it protect layer, which make duct rodder cover sliding on the surface, durable, corrosion resistant and has good insulation performance. Which make them safe for use in cable pulling in the conduit. Duct rodders will equipped with different size reel according to the length of rod. There are wheels on the reel, which could make it easy to move. Features and benefits: Light weight, durable, resistance to acid, aging resistant, corrosion resistant High tensile strength and bending properties, which make it to go through narrow pipes easily. Good temperature adaptability, the product will not soften in hot weather/nor become brittle in cold weather. It is usability will not be affected by temperature. Outer protect layer are made of high density polyethylene engineering plastic, which has good anti-UV capability. cover was coated with long-term UV-resistant polyethylene. it surface has the advantage of smooth, wear-resistant and long service life. There are meter mark on the protect layer of duct rodder. The length is 100m to 400m. There are kinds of colors for the rod to choose. Technical Data of Duct Rodders: 1. Reinforce Fiberglass core Property Data and Value Reinforcement E-Glass Fiber Glass content of inner part 80-85% Material of pulling rod Epoxy fiber glass(inner) and high density polyethylene(outer) Density >150g/m Diameter tolerence ¡À0.10mm Work situation temperature -40 ~ +80 Mechanical properties Property data Min pulling strength 4000N 5% Tensile modulus >30000 MPa Consistency of rod 150g ¡ 5% Flexural modulus >30000 MPa Elongation at Break 2.5-3% 2. Polyethylene cover Material: Medium Density polyethylene resin for the insulating and jacketing of telecommunication cables. Property Data Tensile strength >150N Environmental stress & crack resistance >1000 hr Heat stability ok Carbon Black ok plastic woven 0.5*0.15*0.5m 1.5*0.5*1.5m

Introduction Our company produces Duct Rodders has 12 years of history, we generate different diameter of Duct Rodders, diameter range from 3mm to 15mm length of 15mm.Duct Rodders, 60m, 100m, 150m, 180m and a variety of specifications, of course also can according to the customer need to customize the length. The color of the rod is divided into white, yellow, orange, blue, black, green, red, we on the rod make m the number of markers, and can be used for the customers in the rod marker customers trademarks. We can provide a variety of Duct Rodders cage style, in order to meet the needs of customers in different countries. Product introduction The rod WanQi rods are manufactured from state-of-the-art materials formulated to offer the high performance & durability demanded by our customers.The core of the rod is manufactured by the pultrusion process. This involves impregnating high strength continuous glass fiber filaments with a liquefied resin. The fibers are drawn in to a heated die where the resin matrix is cured, bonding the fibers together and allowing mechanical loads to be transmitted through the matrix and distributed amongst the fibers.The resulting pultruded rod combines both the high stiffness required to push the rod through long distances of ducting, with the flexibility to handle tight bends without damage. This inner core is then coated with a highly durable, scratch resistant polypropylene sheath which protects the core from mechanical damage. The frames Frames are also a feature of the Hunter systems. a larger footprint for stability; steel brake handles that will last forever; dual rod out-feeding positions and wheels inside the frame width. The two smallest sizes feature frames with the feedout built into the handle. All frames can be laid down on either side. These are just some of the design features that will make every unit more usable and friendly for the end user. Rod selectIon Which is the right rod diameter for any given application? The rod selection is usually governed by several factors including: The size of ducting it is to be pushed through The distance the rod is to be pushed The number and tightness of bends in the ducting If the ducting is already occupied by cable When being pushed through the duct, any rod will tend to form “sine waves”, hitting the wall of the duct at certain intervals. Each time the rod comes in contact with the wall of the duct, it causes friction. The friction will build and eventually prevent the rod from being pushed any further. Small rod in large duct will make more frequent contact with the ducting; the same rod in smaller duct will make less frequent contact and therefore less friction so it can be pushed further. Large rod in small ducting is a good situation, but reduced flexibility of the rod ma

Features and benefits: Strong non-conductive fiberglass rod construction. Rustproof bull-nose pulling eye. For longer conduit runs and underground duct. Rugged tubular steel reel with adjustable positioning. Feed device allows rod to feed out or be wound back onto reel with easy push or pull of rod. Many applications, both commercial and residential. 8pics 300kg 1350*480*1500.

Introduction Our company produces Duct Rodders has 12 years of history, we generate different diameter of Duct Rodders, diameter range from 3mm to 15mm length of 15mm.Duct Rodders, 60m, 100m, 150m, 180m and a variety of specifications, of course also can according to the customer need to customize the length. The color of the rod is divided into white, yellow, orange, blue, black, green, red, we on the rod make m the number of markers, and can be used for the customers in the rod marker customers trademarks. We can provide a variety of Duct Rodders cage style, in order to meet the needs of customers in different countries. Product introduction The rod WanQi rods are manufactured from state-of-the-art materials formulated to offer the high performance & durability demanded by our customers.The core of the rod is manufactured by the pultrusion process. This involves impregnating high strength continuous glass fiber filaments with a liquefied resin. The fibers are drawn in to a heated die where the resin matrix is cured, bonding the fibers together and allowing mechanical loads to be transmitted through the matrix and distributed amongst the fibers.The resulting pultruded rod combines both the high stiffness required to push the rod through long distances of ducting, with the flexibility to handle tight bends without damage. This inner core is then coated with a highly durable, scratch resistant polypropylene sheath which protects the core from mechanical damage.

Introduction Our company produces duct rodders has 12 years of history, we generate different diameter of duct rodders, diameter range from 3mm to 15mm length of 15mm.Duct rodders, 60m, 100m, 150m, 180m and a variety of specifications, of course also can according to the customer need to customize the length. The color of the rod is divided into white, yellow, orange, blue, black, green, red, we on the rod make m the number of markers, and can be used for the customers in the rod marker customers trademarks. We can provide a variety of duct rodders cage style, in order to meet the needs of customers in different countries. Product introduction The rod Wanqi rods are manufactured from state-of-the-art materials formulated to offer the high performance & durability demanded by our customers.The core of the rod is manufactured by the pultrusion process. This involves impregnating high strength continuous glass fiber filaments with a liquefied resin. The fibers are drawn in to a heated die where the resin matrix is cured, bonding the fibers together and allowing mechanical loads to be transmitted through the matrix and distributed amongst the fibers.The resulting pultruded rod combines both the high stiffness required to push the rod through long distances of ducting, with the flexibility to handle tight bends without damage. This inner core is then coated with a highly durable, scratch resistant polypropylene sheath which protects the core from mechanical damage.

Duct rodder are composed of fiber glass rod which is extruded by fiber glass and high strength resin at high temperature. This type of rod has high tensile strength and flexibility. It was covered by a high density polyethylene engineering plastic as its protect layer, which make duct rodder cover sliding on surface, durable,corrosion resistant and has good insulation performance, which make them safe for using in cable occupied duct. High Density polyethylene(grade: for insulating and jacketing of Telecommunication cables) is used in the outer diameter coating. Duct rodder will be equipped with different size reel according to the length of rod. There are wheels on the reel, which make it convenient for moving. Model specification 4.5mm,6mm,8mm,10mm,11mm,12mm,13mm,14mm,15mm,16mmfor your choice, and we can also accept OEM order Length 30,50,60,80,100,120,150,180,200,250,300,350,400,450,500 meters for choice. Material Fiberglass (inner) and high density polytgtkebe(outer) Density >1.9gr/cm3 Working temperature - 40 to + 80 Minimum pulling strength 4000 N5% Tensile Modulus >46.500Mpa