Ytgfl seriesglass fiber liquid filter cartridge Product description Ytgf series filter adopts superfine glass fiber materials, with large pollutants holding capacity and the inherent adsorption ability, especially suitable for filtering with colloid, oils and high content of liquid with particulate matter. Made of super fine glass fiber, low starting pressure difference, high flow capacity, long service life, interception efficiency can reach above Performance features Limited dissolved matter high adsorption effect. Application Environmental waste water filtratio n, ink filtration, oil field water injection filtration, wine, soft drinks filtration Technical parameter Filter cartridge structurefilter area0.6 Filter membraneglass fiber Guide layerimported nonwoven Inner supportcapshellpp, stainless steel Seal ring materialsilicone rubbervitonepdmptfe Outer diameter50mm68mm Working situationworking temperature90 Maximum working pressure diff Erenceforward direction0.4mpa/23
Membrane pleated filter cartridge Matterial:pp od.:º¦69mm id.:º¦28mm length:10" end cap options: 1.Single open end 2.Double open end 3.222 o-ring with flat/fin end 4.226 o-ring with flat/fin end
Hongtek PP Melt Blown Filter Cartridges are made of 100% PP fiber, manufactured by different pore diameter of spray nozzles. depth construction with fine fibers in inner layer when in outer layer fiber is coarse. It is high dirt holding capacity, low pressure drop, high flow rate, good chemical resistance, no fiber release, longer service life and effectively filtration for suspended particle, sediment and other kinds of impurities. 1. Safety Polypropylene material have a lot of demanding applications . 2.Depth layers structure ,high contaminant holding capacity and longer filter service life . 3.Made of FDA grade PP material which is environmental protection, without binders, additives and lubricants . 4.High filtration efficiency, consistent filtering performance. 5.Mainly applied to most industry standard housings .
Polypropylene Pleated Filter Cartridge
Polypropylene Pleated Filter Cartridge Polypropylene filter cartridges are used in critical filtration Applications within food, pharmaceuticals, biotech, dairy, beverages, Brewing, semiconductor, water treatment and other process Industries Polypropylene pleated cartridges use the very latest gradient density micro fiber media technology to provide a combination of excellent micron ratings, high flow rates and high contaminant holding capacities. Polypropylene offers an extremely broad chemical compatibility making it suitable for Many applications. Technical Specifications: Sizes (inch) : 10 , 20 , 30 , 40 Pore Size (m) : 0.1, 0.2, 0.45, 1, 3, 5, 10 & 20 Standard Outside Diameter : 68mm / 70 mm (also as per client specification) End Caps: DOE & SOE (Code 7)
Polypropylene pleated filter is the product for large flow having maximum filtration area due to its continuous pleated structure, and not only has long service life by the precision filtration performance (more than 90%) and low differential pressure, but also does not have breakaway of the filter materials and matter erupted by making out perfect structure to prevent solution leak with structural stability through heat sealing. Inner diameter:28mm Outer diameter:70/83/130mm Length:10"/20"/30"/40"
Pleated Dust Collection Filter Cartridge
Description PES Cartridges are made up of Polyethersulfone with uniform pore distribution to ensure maximum performance in bacterial retentions. It's upstream &downstream polyester support ensures complete resistance to pressure shocks. Polyethersulfone membrane is hydrophilic in nature, hence it allows easy integrity testing for all applications where daily controls are required. The membrane possesses broad chemical compatibilities & contains no surfactants. And it can provide absolut rating to fulfil the most demanding filtering requirements, widely used for sterile filtration in Active Pharmaceutical Ingredients production. Features: 1.Excellent hydrolytic stability & chemical compatibility. 2.Specific pore size distribution for full bacterial retention. 3.End caps and connectors are sealed by thermal bond, free from binder. 4.Low pressure drop and high flow rate. 5.Absolute rated. 6.Autoclave or in situ steam sterilization features. 7.100% integrity test is acceptable. Application 1.LVP and SVP sterilization filtration. 2.Biological products sterilization filtration. 3.Beverage & wine sterilization filtration. 4.Freeze dried powder sterilization filtration. 5.Pure water & mineral water sterilization filtration. 6.High purity chemical reagent sterilization filtration.
Description The Polypropylene pleated filter cartridge or PP Filter Cartridge is constructed with a high surface area polypropylene media(PP microporous membrane) for low initial pressure drop, high dirt holding capacity.It is an efficient membrane prefilter and can act as a final polishing filters for numerous fluid refining processes. The filter cartridges are constructed with heavy duty molded cage which enables it to withstand high pressure drop. Features 1 Micron ratings from 1 to 100 �¼m â?? broad application range 2 Polypropylene construction â?? inert to many process fluids(High chemical compatibility) 3 Various gasket/O-ring materials for you to choose to fulfil your different needs 4 Heavy-duty molded cage â?? high structural strength 5 Thermally welded construction. 6 PP microporous membrane provides high filtration performance and long service life Application 1 Prefiltration in chemical industry 2 Prefiltration in pharmaceutical industry, the processing of injections 3 Prefiltration in food and beverage industry
PP PLEATED CARTRIDGE FILTER
Main features: High flow rate with low pressure drops; High particle removal efficiency; Easy installation, replacement and maintenance; Long service life. Specifications & technical data Material membrane: pvdf Core: polypropylene/sus304l O ring/gasket: silicone/viton/tev/epdm Specifications: pore size (um): 0.20, 0.45, 0.80, 1.00, 3.00 Outer diameter(od): 68mm / 70 mm (can be decided by client) Length (inch): 10, 20, 30, 40 Endcaps: doe, soe (code2, code3, code7, code8) Technical data: effective filtration area (10"): y0.6 m2 Normal working temperature: Max. Working temperature: 90 Max. Differential pressure: 4.2 bar Ph value: 1-13 Sterilization method: autoclaving within 30 minutes Water flow rate with different pressure see the chart Test: 100% integrity test :25 y95% ethanol 0.2um¡y0.70 bar; 0.45um¡y0. 50bar Applications: (mainly for winery, chemical and electronical inudstry ) Bacteria removal for winery industry; Gas filtration for electronic industry, biological engineering, precision mechanical industry; air filtration in aseptic packing industry; ozone filtration for mineral water and purified water; bacteria removal filtration for all kinds of organic solvent. Complete test (minimum bubble point ) 0.2um >=0.07mpa 0.45um>=0.04mpa
Specifications: Material: PES (Polyether Sulphone) Pore size: 0.05um, 0.1um, 0.20um, 0.45um, 0.65um, 0.8um, 1.2um Length: 5inch, 10inch, 20inch, 30inch, 40inch END CAP Configuration: 1. Code 3 (222 Flat) 2. Code 8 (222 Fin) 3. Code 2 (226 Flat) 4. Code 7 (226 Fin) 5. DOE O-RING: 1. Silicone 2. VITON 3. EPDM 4. TEV Remark: Customization is available upon request. Features: 1. The membrane stack consists of imported PES filter membrane and deflector layer, and possesses superior properties and chemical-resistance. 2. Hydrophilic membrane, with uniform pore size and high pore volume 3. High flowing rate and particle retention rate 4. Manufactured in Cleaning Room 5. Possess superior performance of high-temperature resistance and acid& alkali resistance 6. Each cartridge filter experience 100% integrity test as well as flush with super pure water Applications: 1. Sterilization filtration in pharmaceutical and biological industry 2. Sterilization filtration for drinking water, beverage, wine and various liquids 3. Terminal filtration and point-of-use filtration for high pure water and deionized water 4. Purification filtration for various chemical raw material and medicament 5. Much finer pre-filtration Packing: 10inch: 24pcs/ctn (65x42x28cm) 20inch: 15pcs/ctn (65x42x28cm) 30inch: 15pcs/ctn (89x42x28cm)
Customized connector pleated sintered filter cartridges are filter elements that are made of stainless steel wire mesh or sintered metal fiber felt. The filter cartridges are formed by sintering at the contact points of the wire mesh, creating a porous filter cylinder with high surface filtration performance. The cartridges feature a pleated design, providing a larger filtration area and strong dirt-holding capacity. They can be provided with double-open ends or single-open ends, often accompanied by threaded end gaskets (such as O-rings) to reduce friction. Specifications Material: Stainless steel 304/316L or other special alloys Filtration precision: 1-300 microns Porosity: Up to 90% Length: 99-1490 mm Diameter: 35-80 mm Operating temperature: -200�°C to 600�°C Cleaning methods: Backwashing, ultrasonic cleaning Connector: As per drawing requirements Features High dirt-holding capacity: The pleated design provides a larger filtration area, allowing the filter cartridge to efficiently capture and retain dirt, extending its service life. Corrosion resistance: The filter cartridge is made of stainless steel throughout, exhibiting excellent corrosion resistance and suitable for filtering various corrosive media. High strength and stability: The filter cartridge possesses high strength and stability, capable of withstanding high pressure and harsh operating conditions, ensuring reliable operation of the filter. Multiple filtration grades: Different filtration grades of filter cartridges can be provided to meet various particle size filtration requirements. Easy to clean: Pleated sintered filter cartridges can be cleaned through various methods, including backwashing, reverse flow, and ultrasonic cleaning, while still maintaining high filtration efficiency after cleaning. Applications Chemical industry Oil and gas industry Food and beverage industry Pharmaceutical industry Electronics industry Automotive industry Other industrial applications
Description The large diameter geometrical design of polypropylene pleated high flow filter cartridges enlarge surface filtration area, high dirt holding capacity to save the quantities of filter cartridges, high flow rate when filtration efficiency exceed 99%. high flow filter cartridges are wide range of chemical compatibility and applications, the ideal option for industrial high flow water filtration system to protect RO membrane. Feature 1. Gradient pore structure of high flow filter cartridges provide layered filter function 2. Outer hard cage can withstand higher pressure than Pall Ultipleat high flow filters made by soft netting 3. High flow filter cartridges are high filtration efficiency, lower waste disposal costs and more economical 4. Inside to outside filtration pattern of high flow filters ensure holding all impurities stay inside the pleated media 5. The highest flow rate of high flow filters could get 110 M3/H and Beta 5000 rated (99.98% efficiency) 6. The reduction of filtration system space maximum 50% and lower maintenance costs when use high flow filters 7. Materials meet FDA requirements, wide chemical compatibility, no resins, binders, or adhesives and 100% integrity testing Application 1.Paints and coatings 2. Microelectronic, film and resin 3. Water treatment in Power generation 4. RO Pre filtration and sea water desalination 5. Solvents, API and water filtration in Bio field 6. Bottled water, high fructose, edible oil, soft drink and milk
FNB-NYis an absolute pleated filters,the double layers N66 membranes provided excellent filtration performance, it use for beverage,soft drink steriliation filtration.higher filtration area provide high flow rates low pressure drop and increased dirt holding capacity.
Material Membrane: PTFE Core: polypropylene/sus304L O ring/Gasket: Silicone/Viton/TEV/EPDM Specifications: Pore size (um): 0.10,0.20, 0.45, 0.80, 1.00 Outer Diameter(OD): 68mm / 70 mm (can be decided by client) Length (inch): 10, 20, 30, 40 Endcaps: DOE, SOE (code2, code3, code7, code8) Technical data: Effective filtration area (10"): í¦0.6 M2 Normal working temperature: í_80 íµ/ 172¿H Max. working temperature: 90 íµ/ 194¿H(Pí_1.0 bar) Max. differential pressure: 4.2 bar PH value: 1-14 Sterilization method: Autoclaving (121í+2 íµ) within 30 minutes Export Standard package ( 1pc/Poly bag/carton)
Material Membrane: PES Core: polypropylene/ sus304L O ring/Gasket: Silicone/Viton/TEV/EPDM Specifications: Pore size (um): 0.10,0.20, 0.45, 0.65, 1.00 Outer Diameter(OD): 68mm / 70 mm (can be decided by client) Length (inch): 10, 20, 30, 40 Endcaps: DOE, SOE (code2, code3, code7, code8) Technical data: Effective filtration area (10"): í¦0.65 M2 Normal working temperature: í_80 íµ/ 172¿H Max. working temperature: 90 íµ/ 194¿H(Pí_1.5 bar) Max. differential pressure: 4.2 bar PH value: 2-13 Sterilization method: Autoclaving (121í+2 íµ) within 30 minutes Export standard packing (1pc/poly bag/carton)
Material Membrane: Nylon( N6/ N66) Core: polypropylene/ sus304L O ring/Gasket: Silicone/Viton/TEV/EPDM Specifications: Pore size (um): 0.10,0.20, 0.45,0.65, 0.80, 1.00, 3.00 Outer Diameter(OD): 68mm / 70 mm (can be decided by client) Length (inch): 2.5, 5, 10, 20, 30, 40 Endcaps: DOE, SOE (code2, code3, code7, code8) Technical data: Effective filtration area (10"): í¦0.65 M2 Normal working temperature: í_60 íµ/ 149¿H Max. working temperature: 80 íµ/ 172¿H(Pí_1.5 bar) Max. differential pressure: 4.2 bar PH value: 6-13 Sterilization method: Autoclaving (121í+2 íµ) within 30 minutes Export Standard package ( 1pc/Poly bag/carton)
Material Membrane: PP/HPP Core: polypropylene/sus304L O ring/Gasket: Silicone/Viton/TEV/EPDM Specifications: Pore size (um): 0.10, 0.20, 0.45, 1.0, 3.0, 5.0 Outer Diameter(OD): 68mm / 70 mm (can be decided by client) Length (inch): 10, 20, 30, 40 Endcaps: DOE, SOE (code2, code3, code7, code8) Technical data: Effective filtration area (10"): í¦0.6 M2 Normal working temperature: í_55íµ/ 131¿H Max. working temperature: 80 íµ/ 194¿H(Pí_1.0 bar) Max. differential pressure: 4.2 bar PH value: 1-13 Sterilization method: Autoclaving (121í+2 íµ) within 30 minutes Water flow rate with different pressure see the chart Export Standard package ( 1pc/Poly bag/carton)
Filtration performance is further enhanced by the use of a state of the art multi layer pleating process. The multi layers provide an integral pre-filter and protection to the cellulose fiber media. Resulting in maximum dirt holding and increased durability to extend the filters life. The filters are manufactured to the most stringent production standards using the latest automated manufacturing equipment and the highest quality of materials. The cartridge is assembled with thermal weld technology making a one pieces cartridge construction for maximum integrity and strength. Extensive filter production knowledge and the most modern manufacturing facilities results in a top of the range, but still economic pleated cellulose fiber filter cartridge.
