Basic knowledge about the external floating roof tank: The floating roof tank (FR tank) is broadly divided into external floating roof tank and internal floating roof tank (IFR tank). The floating roof tank (FR tank) does not have a fixed roof. It is open in the top and has a floating roof only. The external floating roof tank consists of an open-topped cylindrical steel shell equipped with a roof, which floats on the surface of the stored liquid. The roof rises and falls with the liquid level in the tank. As opposed to the fixed roof tank, there is no vapor space (ullage) in the floating roof tank, very low liquid level situations are not included. In principle, this eliminates tank breathing loss and greatly reduces the evaporative loss of the stored liquid. There is a rim seal system between the tank shell and roof to reduce rim evaporation. The floating roof has support legs hanging down into the liquid. At low liquid levels the roof eventually lands and a vapor space forms between the liquid surface and the roof, similar to the fixed roof tank. The support legs are usually retractable to increase the working volume of the external floating roof tank. What advantages does the external floating roof tank have? The external floating roof tank is usually installed for environmental or economical reasons to limit product loss and reduce the likelihood of emission of volatile organic compounds (VOCs) and other potential air pollutants. Normally, the roof of the external floating roof tank rests directly on the surface of the stored liquid, leaving little vapor space and consequently leading to a much lower risk of rim space fire. What products are suitable to store by the external floating roof tank? The external floating roof tank is storage tank that is commonly used to store large quantities of crude oil, condensate and so on petroleum products. Medium flash point liquids such as naphtha, kerosene, diesel, and crude oil are usually stored by the external floating roof tank. The fixed roof tank, internal floating roof tank and external floating roof tank are the main types of API Standard 650 storage tank we supply. http://api650steel.com/ Contact Ms. Olivia Henan BEBON Iron & Steel Co., Ltd Email: olivia.roy88@gmail.com Tel: 008637186151527
Storage Tank
Industrial Storage Tanks
Bulk Storage Tanks
BCPL offers vacuum-insulated, double-walled cylinders designed for various applications, including liquid nitrogen (LIN), liquid oxygen (LOX), liquid argon (LAR), liquid carbon dioxide (LCO2), and liquefied natural gas (LNG).
100% NEW HDPE
Features: High strength and high corrosionproof, provides long service life and convenient to fill and clean. It provides wide applicability and can be widely applied for packaging in industries such as chemical engineering, petroleum, medicine and food etc. Seal liquid test:Put the sealed barrel with liquid upside down or tap,the seal is at the lowest position,and no leakage within 24 hours. The standard specifies blow-moulding technology requirements of the barrel, test methods and the rules and symbols, packaging, transporting and storage. This standard applies to polyethylene as the main raw material, barrels production through automatic blow molding machine,and this type of blow molding barrel is mainly used for solids or chemical products. We also can help to change any design as your requirements. such as size,weight,color,capacity ect.
Colour: Natural Item: 70kg 120 x 100 x 116 Pack: n/a Pallet: 70kg 120 x 100 x 115 Cap: IBCLID, IBCVALVECAP Tamper Evident: No Food Grade: Yes UV Protected: Yes Dangerous Goods: Yes In Stock: Yes Bulk Options: n/a Specification: Yes MXF1000 IBC Food Grade/ Dangerous Goods
high quality stainless steel 201 honey tank with cover and valve 25kg Basic Information Place of Origin: CHINA Brand Name: Super-Sweet Certification: ISO Model Number: HB Minimum Order Quantity: 1 Price: 12-45kgs Packaging Details: 25 kg honey tank Standard Packing: 1pcs/carton Size: 34*33*33cm GW: 8kg Delivery Time: Shipped in 5 days after payment Payment Terms: T/T, Western Union, MoneyGram, D/P, L/C Supply Ability: 5000 Piece/Pieces per Month 25 kg honey tank
1000 liter / 275 gallon repurposed rain tank. These are used & new tanks, food-grade tanks are comprised of a galvanized metal frame with a pallet (metal, plastic, or wood) and a plastic HDPE bottle. The rain tank has a 6, 8, or 12-inch top-fill cap and a 2-inch bottom butterfly or ball valve. The tanks may or may not include a plastic cap with a buttress or NPT thread for the bottom valve. If a valve cap is included, it can be drilled to accept our garden hose spigot assembly. A spigot assembly and 7/8 inch hole saw are not included. The dimensions are approximately 39 inches wide across the bottom valve, 47 inches deep, and 48 inches tall and the tanks weigh approximately 75 lbs empty. Previous contents may include olive oil, fish oil, organic fertilizer or beverage concentrates and some residue may still remain inside. The residue, if any, will only enrich the soil.
We can supply tanks and vessels required for storage and transportation tanks of various liquids and gases like LPG, PROPANE, PROPYLENE, AMMONIA, LIQUIDCARBONDIOXIDE, CHLORINE , HYDROGEN, NITROGEN, OXYGEN, ARGON, SULPHUR DIOXIDE, BUTADINE, ETHYLENE OXIDE AND OTHER GASES , in a wide range of various capacities for use in domestic, industrial and transportation sectors. The manufacturing of these tanks requires special expertise , technology and strict quality control measures. These tanks are manufactured confirming to various design standards like ASME SECT VIII DIV I & II, AD- MERKBLATTER, PD5500, IS2825 and under the stagewise inspection of various third party inspection agencies like DNV, BVIS, TUV, LLOYDS ,PDIL and others. We also supply a wide range of Process Plant Equipments such as Coded Pressure Vessels, Distillation Columns, Towers, Reactors and Heat Exchangers. Also we undertake turnkey projects to construct Fixed & Floating Roof Tanks, Mounded Storage Tanks and Plant Piping.
Mixing Tank
Blending Tank
Wash Settling Tanks
Used for storage of LNG at LNG filling stations. These come in various capacities and can be designed as per customer requirements
BCPL manufactures two & three-piece welded steel cylinders for LPG used in automobiles, meeting the established standards and as per the customersâ?? requirement. These auto LPG containers are available in cylindrical and toroidal shapes. The cylindrical containers range from 200 to 400 mm in diameter, whereas toroidal containers range from 180 to 270 mm in diameter. The cylinders are available in the following capacities: 4.9 Ltr, 5 Ltr, 5.2 Ltr, 5.8 Ltr, 15 Ltr, 25 Ltr, 28 Ltr (toroidal), 34 Ltr (toroidal), 36 Ltr, 50 Ltr, 60 Ltr and 75 Ltr. BCPL is one of the renowned companies in India known for the quality of automotive tanks. These tanks are marketed through a Pan-India network of distributors and dealers.
BCPL manufactures 990 Ltr water capacity tanks. The manufacturing unit is equipped to design and manufacture tanks up to 3000 liters of water capacity. These tanks are heat-treated in a state-of-the-art NC control furnace and painted with polyurethane paint with an undercoat of epoxy primer. The powder coated surface is also supplied on request. These cylinders are supplied to Indian oil and marketing companies such as Indian Oil Corporation, Hindustan Petroleum, Bharat Petroleum and to companies such as TOTAL, Super Gas and exported to other countries.
Hammered Copper Water Tank
Prefabricated Septic Tank
Product’s name: Injection mold Keyword: Injection mold,blow molding, rotary mold, roto mold. Specification: We offer to make molds for injection molding, blow molding, rotary molding roto molding. We also undertake injection, blow or rotary molding works from Toys to Big bins or water tanks, floating docks, road barrier etc. We can do custom design plastic parts or components. Water Tanks ( Roto Molding process)
