Ethicon 8702H 7 0 Prolene Suppliers and Manufacturers

The Ethicon 8702H is a specific type of suture produced by Ethicon, a subsidiary of Johnson & Johnson and a leading manufacturer of surgical sutures and other medical devices. The product you mentioned, "7-0 Prolene Suture," refers to a specific size and type of suture. Here are some key details about the Ethicon 8702H 7-0 Prolene Suture: Suture Material: Prolene is the brand name for a synthetic, non-absorbable monofilament suture material made of polypropylene. Monofilament sutures like Prolene are smooth and reduce tissue drag, making them suitable for various surgical applications. Size: The "7-0" designation indicates the size of the suture. In this case, it is a very fine suture. Suture sizes are denoted numerically, with smaller numbers indicating larger sizes. Color: The "blue" in "blue monofilament" indicates the color of the suture. Suture colors are used to enhance visibility during surgery. Non-Absorbable: Prolene sutures are non-absorbable, meaning they do not break down or dissolve over time. This characteristic makes them suitable for applications where long-term tissue support is required. Indications: Prolene sutures are commonly used in various surgical procedures, including cardiovascular, ophthalmic, and plastic surgery. The choice of suture material and size depends on the specific requirements of the surgical procedure.

Ethicon Prolene is a brand of surgical suture material, and the notation "2/0" refers to the size or diameter of the suture. The cutting needle indicates the type of needle attached to the suture. A cutting needle is designed with a sharp edge, allowing it to cut through tissues, and it is often used for skin closure and in procedures where a clean, precise incision is needed. So, "Ethicon Prolene 2/0 cutting needle" signifies a Prolene suture with a size of 2/0 and a cutting needle. Here's a breakdown: Ethicon Prolene: Ethicon is a subsidiary of Johnson & Johnson and is known for producing a variety of surgical products, including sutures. Prolene is a type of suture material made of polypropylene. 2/0 (pronounced "two-oh"): This indicates the size or diameter of the suture. In this case, 2/0 is a medium-sized suture commonly used for various surgical procedures. Cutting Needle: A cutting needle is designed for sharp and precise penetration through tissues. It's commonly used in procedures where a clean incision is required, such as in skin closure.

S.N CAS No. Item 1 9003-07-0 Poly(propylene) 2 25766-59-0 Polycarbonate resin 3 26062-94-2 Poly(butylene terephthalate) 4 9002-86-2 poly(vinyl chloride) 5 9002-88-4 Polythene 6 9003-56-9 ABS Resin 7 25212-74-2 Poly(1,4-phenylene sulfide) 8 25135-51-7 Polysulfone 9 110-63-4 Butane-1,4-diol 10 9003-35-4 Phenol-formaldehyde resin 11 9003-53-6 Polystyrene 12 9011-14-7 Poly(methyl methacrylate) 13 26009-03-0 Poly(2-Hydroxyacetic acid) 14 24980-41-4 Polycaprolactone 15 31533-76-3 Polyphenyl ether 16 29658-26-2 PEEK 17 9002-81-7 PolyoxyMethylene 18 26023-30-3 Polylactic acid 19 63428-84-2 Polyamide 20 25038-59-9 Polyethylene terephthalate

S.N CAS No. Item 1 100-21-0 Terephthalic acid 2 67763-03-5 Silsesquioxanes 3 9003-01-4 Acrylic acid 4 1333-86-4 Carbon black 5 80-62-6 Methyl methacrylate 6 61788-97-4 Haloperidol 7 75-38-7 1,1-difluoroethylene 8 100-42-5 Styrene 9 9002-84-0 Poly(tetrafluoroethylene) 10 124-04-9 Adipic acid 11 107-21-1 Ethylene glycol 12 126-30-7 Neopentyl glycol 13 85-44-9 Phthalic anhydride 14 106-89-8 Epichlorohydrin 15 9003-08-1 Amino resin 16 9006-03-5 Chlorinated rubber 17 13463-67-7 Titanium dioxide 18 12227-89-3 Iron Oxide Black 19 922-67-8 Methylpropiolate 20 538-24-9 Trilaurin 21 9011-05-6 Urea formaldehyde 22 79-41-4 Methacrylic acid 23 1314-13-2 Zinc oxide 24 80-05-7 Bisphenol A 25 121-91-5 Isophthalic acid

1 117-81-7 Bis(2-ethylhexyl) phthalate 2 117-84-0 Di-n-octyl phthalate 3 85-69-8 Butyl 2-ethylhylhexyl phthalate 4 84-61-7 Dicyclohexyl phthalate 5 84-74-2 Dibutyl phthalate 6 84-69-5 Diisobutyl phthalate 7 131-11-3 Dimethyl phthalate 8 84-66-2 Diethyl phthalate 9 20548-62-3 Bis(7-methyloctyl) phthalate 10 68515-49-1 Diisodecyl phthalate 11 84-75-3 Di-n-hexyl phthalate 12 6422-86-2 Dioctyl terephthalate 13 137-89-3 Bis(2-ethylhexyl) isophthalate 14 123-79-5 Dioctyl adipate 15 122-62-3 Bis(2-ethylhexyl)sebacate 16 109-43-3 Bis(n-butyl)sebacate 17 512-56-1 Ttrimethyl phosphate 18 126-73-8 Tributyl phosphate 19 8013-07-8 Epoxidized soya bean oil 20 77-93-0 Triethyl citrate

1 63148-62-9 Silicone oil 2 77-92-9 Citric acid 3 9003-05-8 Polyacrylamide 4 7664-39-3 Hydrogen fluoride 5 9000-11-7 Carboxymethyl cellulose 6 7757-82-6 Sodium sulfate 7 68-04-2 Sodium citrate 8 7664-38-2 Phosphoric acid 9 1310-73-2 Sodium hydroxide 10 497-19-8 Sodium carbonate 11 139-33-3 EDTA disodium 12 67-63-0 Isopropanol 13 25322-68-3 Polyethylene Glycol 14 144-55-8 Sodium bicarbonate 15 4404-43-7 Fluorescent Brightener 28 16 7758-29-4 Sodium tripolyphosphate 17 7601-54-9 Trisodium phosphate 18 532-32-1 Sodium benzoate 19 5329-14-6 Sulfamic acid 20 142-91-6 Isopropyl palmitate 21 7782-99-2 Sulfurous Acid 22 9014-01-1 Subtilisin (Compound proteinase) 23 1344-09-8 Sodium silicate 24 6834-92-0 Sodium metasilicate 25 7720-78-7 Ferrous sulfate

1 27176-87-0 Dodecylbenzenesulphonic acid 2 151-21-3 Sodium dodecyl sulfate 3 9016-45-9 Nonylphenol Ethoxylate 4 63449-41-2 Benzalkonium Chloride 5 139-07-1 Dodecyldimethylbenzylammonium chloride 6 9004-82-4 AES 7 6863-42-9 Coconut oil acid diethanolamine 8 683-10-3 Lauryl betaine 9 25155-30-0 Sodium dodecyl benzene sulfonate 10 107-43-7 Betaine 11 112-00-5 Dodecyltrimethylammonium chloride 12 25496-72-4 Glyceryl monooleate 13 1120-02-1 Octadecy trimethyl ammonium bromide 14 9005-64-5 Polysorbate 20 15 9005-67-8 Tween 60 16 68213-23-0 Fatty alcohol polyglycol ether 17 68585-34-2 Sodium lauryl ether sulfate 18 9004-95-9 Polyethylene Glycol Monocetyl Ether 19 9004-98-2 Polyethylene glycol monooleyl ether 20 9003-11-6 Polyethylene-polypropylene glycol

1 101-68-8 4,4'-Diphenylmethane diisocyanate 2 9016-00-6 Poly(dimethylsiloxane) 3 26471-62-5 Tolylene diisocyanate 4 100-42-5 Styrene 5 141-32-2 Butyl acrylate 6 107-13-1 Acrylonitrile 7 106-99-0 Buta-1,3-diene 8 75-38-7 1,1-difluoroethylene 9 9-38-9 Chlorotrifluoroethylene 10 111-44-4 2,2'-Dichlorodiethyl ether 11 1187-93-5 Trifluoromethyl trifluorovinyl ether 12 21645-51-2 Aluminum hydroxide 13 116-14-3 Tetrafluoroethene 14 116-15-4 Hexafluoropropylene 15 126-99-8 Chloroprene 16 103-11-7 2-Ethylhexyl acrylate 17 140-88-5 Ethyl acrylate 18 78-79-5 Isoprene 19 96-33-3 Methyl acrylate 20 1300-21-6 Dichloroethane

Commodity: Sodium Hydrosulfite Other name: Synonyms: Sodium Hydrosulphite; Sodium Dithionite; Dithionous acid, Disodium salt; Sodium Sulfoxylate CAS No.: 7775-14-6 Molecular Weight: 174.10 Chemical Formula: Na2S2O4 Product Description Appearance: White, crystalline powder. Product Feature Odor: Slight irritative. Specific Gravity: Unavailable Solubility: Soluble in water. Density: 2.19 pH: 6-7 pH Test-Method: PH test paper. % Volatiles by volume @ 21C (70F): 0 Boiling Point: Not applicable. Melting Point: >300 C Decomposes. Vapor Pressure (mm Hg): No information found. Bulk Density: ~0.9 Evaporation Rate (BuAc=1): No information found. Application 1. Widely used in textile industry for vat dyeing, reduction cleaning, printing and stripping, textile textile bleaching . 2. bleaching paper pulps , especially mechanical pulps, its the most fittable bleaching agent in pulps. 3. bleaching kaolin clay, fur bleaching and reductive whitening, bleaching of bamboo products and straw products, 4. in mineral, the compound of thiourea and other sulphides. 5. as reducing agent in chemical industry. 6. Sodium hydrosulfite food additive grade is used in foodstuffs, as bleaching agent and preservative dried fruits, dried vegetable, vermicelli, glucose, sugar, rock sugar, caramel, candy, liquid glucose, bamboo shoots, mushrooms and canned mushrooms. Packaging 50kg/100kg net in iron drums with double PVC bags Product Specification/Models NDEX 90%, 88%, 85%. FOOD ADDITIVE Na2S2O4, 90%, 88%, 85%, Fe 20ppm ZincZnOther heavy metal calculated as Pb, 1ppm Water Insolubles05% Shelf Life(month)12

Tumi Ishi blocks are small chunks of wood, cut kind of like a gemstone. Basically the idea is you are supposed to stack them all up. Tumi ishi Wood Balancing Stones for Baby is a new take on the classic wooden building block. Unlike standard square blocks, these blocks have many sides making them more challenging to stack Type: Block Set, Other Classic Toys Material: Wood Size: 3-6cm Color: Natural color Logo: Customized Logo Age Range: 0 to 24 Months, 2 to 4 Years, 5 to 7 years, 8 to 13 Years,... Usage: Relaxing, Educate, Simulate brain development for kids Packing: Bag/carton

Bitumen Primer * Bitumen Primer is Bituminous air curing ready mixed Acid & Alkali resistant special primer. Application * Concrete surface must be clean, dry and rough. No primer should be applied over smooth and wet surface. * After cleaning the concrete surface, one coat of Bitumen Primer should be applied with brush and allow to dry thoroughly. * The drying time will depend upon the temperature. * 24 Month at the temperature 30C (+2OC) Packing * Bitumen Primer: 25 Liter Drum Note * Bitumen Primer contains volatile and slightly toxic solvent. Keep away from spark and open flames at working area. * Bitumen premier it is manufactured using bitumen solution which is used for sealing of prime porous and non-porous surface, and also to protect residential and commercial building. * Bitumen Primer is used to protect substrate against corrosive attack, is suggested to apply anti-corrosive primer.It is best for protection against sub-striate against atmospheric corrosion and chemical corrosion. It is a mixed substance made up of organic liquids that are highly sticky, water proof, viscous,acid proof as with all surface coating, good Bitumen Premier is used for long life of the system. it is applied by brush or roller and allowed to dry before any water proofing treatment so to avoid solvent it is used in defects such as cracks, broken mortar joints, etc. are to be repaired prior to Bitumen primer application. Product Details: Grade Standard Technical Grade Physical State - Liquid Usage - Industrial Color - Black Characteristics: Appearance/Color - Pasty liquid/ black Chemical Base - Bituminous rubber emulsion. Density - 1.0 kg/l Curing Speed/ Rate - 3 - 4 hours Tack free after - 5 - 10 hours Cured after - 2 - 4 days (Dependent on ambient Solid Content by - temperature, substrate temperature, Weight - relative Water Content by weight - humidity and thickness of the coating) Bitumen Content - 41% by weight - Thixotropic (The viscosity can be adjusted by - Viscosity adding up to max. 5% of clean water. - Stir well prior use) - For light protection: 1.0 mm min. Coating - For greater protection: ~ 1.5 - 2.0 mm Thickness applied - in two coats. Water Penetration - 48 h, 1 bar: 78.5 cm2: 0 ml under Hydrostatic - 96 h, 4 bar: 78.5 cm2: 33 ml Pressure - Water vapor 6 x 10-7 mg / hmPa Permeability Service - -30 C to 200 C Temperature - Adhesion Concrete - Very good, Timber: Very good, Metal: Moderate Glass: Poor

Temperature Block Temperature Range: 0 - 105 Max. Heating Rate: 7 /s Max. Cooling Rate: 5 /s

Combusting temperature: 4300 - 4700 Kcal/?g Moisture: around 8% Ash content : around 0, 7% Mechanical durability: 95% Partly destroyed briquettes:14% Size : 65x270 - 300 mm

Combusting temperature: 4300 - 4700 Kcal/?g Moisture: around 8% Ash content : around 0, 7% Mechanical durability: 95% Partly destroyed briquettes:14% Size : 65x270 - 300 mm

1,Hight prurity (99.99% min) Metal Antimony (Sb) 2,4N>99.99%, 5N>99.999%, 6N>99.9999%, 7N>99.99999% 3,Lumps/Ingot/Granule/Bar 4,Color: Gray 5,Atomic weight: 121.760 6,Electronegativity: 2.05 7,CAS No.: 7440-36-0 8,Density: 6.697 g/cm3 (25â??) 9,Melting Point: 630.63 â?? 10,Boiling Point: 1587 â?? 11,Mainly used for the preparation of â?¢ - V compound semiconductor InSb, Bi2Sb, GaSb, high purity alloys, electronic refrigeration element materials and germanium, silicon single crystal dopants.

Refined sunflower oil is perfectly clean oil, which preserves all the nutrients during the production process. This oil can be used in conditions of extremely high cooking temperatures. Margarine and cooking fats are made of refined sunflower oil by hydrogenation. Refined sunflower oil is also used in manufacturing of canned food, as well as in soap boiling and paint and varnish industry. We offer refined sunflower oil packed in bulk and in PET bottles. Custom design print labels Physical properties Refractive index:1.465-1.475 at 40 deg. C Density:0.91-0.92 g/cm3 at 20 deg. C Volatile matter: Max.0.07 % at 105 deg. C Taste : Excellent Odor : None not sensed Appearance: No residue at 40 deg. C Cold test: Min.48 hours at 0 deg. C Colour: Max.1.2 red, lovibond tintometer 5/20 inch Chemical specifications Peroxide:0.2 meq/KG. Of oil % soap:0.0005 % unsaponifiable matter: Max.0.12 Impurities: None % saturated fat(-ty acids):8-12 % unsaturated fat(-ty acids):87-91 %free fatty acids (ffa): Max 0.1 % ash (*): Max.0.05 Saponification value:190.32 koh/g. Of oil Iodine value:134.13 (wijs-hanus method) Feeding energy:900kcal Iron : < 0.02 mg/lt Packaging Details:1) JERRY CAN : 2L, 3L, 5L, 7L, 8L, 10L, 16L, 18L, 20L, 25L 2) BIG MOUTH JERRY CAN : 10L, 16L, 18L 3) PET BOTTLE : 500ML, 750ML, 1L, 1.8L, 2L, 3L, 5L 4) TIN : 16L, 18L 5) METAL DRUMS : 190KGS & 192KG 6) POLY DRUMS : 195KGS 7) FLEXI TANK : 21MT

Refined sunflower oil is perfectly clean oil, which preserves all the nutrients during the production process. This oil can be used in conditions of extremely high cooking temperatures. Margarine and cooking fats are made of refined sunflower oil by hydrogenation. Refined sunflower oil is also used in manufacturing of canned food, as well as in soap boiling and paint and varnish industry. We offer refined sunflower oil packed in bulk and in PET bottles. Custom design print labels Physical properties Refractive index:1.465-1.475 at 40 deg. C Density:0.91-0.92 g/cm3 at 20 deg. C Volatile matter: Max.0.07 % at 105 deg. C Taste : Excellent Odor : None not sensed Appearance: No residue at 40 deg. C Cold test: Min.48 hours at 0 deg. C Colour: Max.1.2 red, lovibond tintometer 5/20 inch Chemical specifications Peroxide:0.2 meq/KG. Of oil % soap:0.0005 % unsaponifiable matter: Max.0.12 Impurities: None % saturated fat(-ty acids):8-12 % unsaturated fat(-ty acids):87-91 %free fatty acids (ffa): Max 0.1 % ash (*): Max.0.05 Saponification value:190.32 koh/g. Of oil Iodine value:134.13 (wijs-hanus method) Feeding energy:900kcal Iron : < 0.02 mg/lt Packaging Details:1) JERRY CAN : 2L, 3L, 5L, 7L, 8L, 10L, 16L, 18L, 20L, 25L 2) BIG MOUTH JERRY CAN : 10L, 16L, 18L 3) PET BOTTLE : 500ML, 750ML, 1L, 1.8L, 2L, 3L, 5L 4) TIN : 16L, 18L 5) METAL DRUMS : 190KGS & 192KG 6) POLY DRUMS : 195KGS 7) FLEXI TANK : 21MT

Refined sunflower oil is perfectly clean oil, which preserves all the nutrients during the production process. This oil can be used in conditions of extremely high cooking temperatures. Margarine and cooking fats are made of refined sunflower oil by hydrogenation. Refined sunflower oil is also used in manufacturing of canned food, as well as in soap boiling and paint and varnish industry. We offer refined sunflower oil packed in bulk and in PET bottles. Custom design print labels Physical properties Refractive index:1.465-1.475 at 40 deg. C Density:0.91-0.92 g/cm3 at 20 deg. C Volatile matter: Max.0.07 % at 105 deg. C Taste : Excellent Odor : None not sensed Appearance: No residue at 40 deg. C Cold test: Min.48 hours at 0 deg. C Colour: Max.1.2 red, lovibond tintometer 5/20 inch Chemical specifications Peroxide:0.2 meq/KG. Of oil % soap:0.0005 % unsaponifiable matter: Max.0.12 Impurities: None % saturated fat(-ty acids):8-12 % unsaturated fat(-ty acids):87-91 %free fatty acids (ffa): Max 0.1 % ash (*): Max.0.05 Saponification value:190.32 koh/g. Of oil Iodine value:134.13 (wijs-hanus method) Feeding energy:900kcal Iron : < 0.02 mg/lt Packaging Details:1) JERRY CAN : 2L, 3L, 5L, 7L, 8L, 10L, 16L, 18L, 20L, 25L 2) BIG MOUTH JERRY CAN : 10L, 16L, 18L 3) PET BOTTLE : 500ML, 750ML, 1L, 1.8L, 2L, 3L, 5L 4) TIN : 16L, 18L 5) METAL DRUMS : 190KGS & 192KG 6) POLY DRUMS : 195KGS 7) FLEXI TANK : 21MT

Refined sunflower oil is perfectly clean oil, which preserves all the nutrients during the production process. This oil can be used in conditions of extremely high cooking temperatures. Margarine and cooking fats are made of refined sunflower oil by hydrogenation. Refined sunflower oil is also used in manufacturing of canned food, as well as in soap boiling and paint and varnish industry. We offer refined sunflower oil packed in bulk and in PET bottles. Custom design print labels Physical properties Refractive index:1.465-1.475 at 40 deg. C Density:0.91-0.92 g/cm3 at 20 deg. C Volatile matter: Max.0.07 % at 105 deg. C Taste : Excellent Odor : None not sensed Appearance: No residue at 40 deg. C Cold test: Min.48 hours at 0 deg. C Colour: Max.1.2 red, lovibond tintometer 5/20 inch Chemical specifications Peroxide:0.2 meq/KG. Of oil % soap:0.0005 % unsaponifiable matter: Max.0.12 Impurities: None % saturated fat(-ty acids):8-12 % unsaturated fat(-ty acids):87-91 %free fatty acids (ffa): Max 0.1 % ash (*): Max.0.05 Saponification value:190.32 koh/g. Of oil Iodine value:134.13 (wijs-hanus method) Feeding energy:900kcal Iron : < 0.02 mg/lt Packaging Details:1) JERRY CAN : 2L, 3L, 5L, 7L, 8L, 10L, 16L, 18L, 20L, 25L 2) BIG MOUTH JERRY CAN : 10L, 16L, 18L 3) PET BOTTLE : 500ML, 750ML, 1L, 1.8L, 2L, 3L, 5L 4) TIN : 16L, 18L 5) METAL DRUMS : 190KGS & 192KG 6) POLY DRUMS : 195KGS 7) FLEXI TANK : 21MT