En590 Diesel 10Ppm 50 Ppm Suppliers and Manufacturers

Product Description - Used globally as a refined diesel oil, having very low sulphur content. Price of product is offered on CIF MED Prices, with deliveries to European ports, buyer's LOI is required, 100% genuine supply from UAE. All fuel offers that we sell are 100% genuine offers, only send us enquiries from 100% genuine buyers who can provide an LOI, and if NO LOI can be sent/available, please do not contact us! As we are only interested in talking to real genuine buyers who are Ready Willing and Able to proceed, who want to secure real product from a genuine seller at real market discounted prices! Product origin - UAE fuel Non - Sanctioned Fuels. Key Specifications/Special Features - Ultra Low Sulphur Diesel 10 ppm & 50 ppm Minimum Order Size and Packaging details - First initial trial shipment of 50,000 MT, 12 month contract, after 1st successful shipment, 200,000 MT to 300,000 MT per month is possible negotiated directly between buyer and seller. SORRY, NO SPOT CONTRACTS ARE ACCEPTED.

PETROALLIANCE diesel fuel is the second distillate of crude oil. Ultra-low sulfur grades of D2, such as GOST 305-82, with a reduce sulfur content to a maximum of 0.02 percent and reduce sulfur pollution emissions. Diesel fuel is often used in diesel engines. Diesel engines or compression ignition engines, rely on the temperature increase of compression, rather than on spark plugs, to achieve reliable ignition timing and combustion efficiency. As a result of their inherently higher compression ratio for a given power output, diesel engines are more fuel efficient than spark ignition engines. Compared with spark ignition automotive engines, diesel engines weigh more, generate more vibration and produce greater particulate or soot emissions. Diesel engines can also produce a particularly carcinogenic type of hydrocarbon pollutant known as polycyclic aromatic hydrocarbons (PAHs), which are generated during the diesel combustion process. The cetane index is a measure of the autoignition quality of a diesel fuel, with higher numbers meaning that the engine is easier to start in cold weather. Our products are exported to Asia, Europe, America, and the CIS.

PETROALLIANCE diesel fuel is the second distillate of crude oil. Ultra-low sulfur grades of D2, such as GOST 305-82, with a reduce sulfur content to a maximum of 0.02 percent and reduce sulfur pollution emissions. Diesel fuel is often used in diesel engines. Diesel engines or compression ignition engines, rely on the temperature increase of compression, rather than on spark plugs, to achieve reliable ignition timing and combustion efficiency. As a result of their inherently higher compression ratio for a given power output, diesel engines are more fuel efficient than spark ignition engines. Compared with spark ignition automotive engines, diesel engines weigh more, generate more vibration and produce greater particulate or soot emissions. Diesel engines can also produce a particularly carcinogenic type of hydrocarbon pollutant known as polycyclic aromatic hydrocarbons (PAHs), which are generated during the diesel combustion process. The cetane index is a measure of the autoignition quality of a diesel fuel, with higher numbers meaning that the engine is easier to start in cold weather. Our products are exported to Asia, Europe, America, and the CIS.

Product: Diesel En590 10 Ppm Origin: Kazakhstan price: Available on fixed price and platts minus price. payment: SBLC/DLC CIF: Any Safe World Port./FOB Rotterdam. Destination: looking for buyer all over the world

Diesel is a light petroleum product, a complex mixture of hydrocarbons (with a carbon atom number of about 10-22), used as fuel for diesel engines. It is mainly composed of diesel fractions produced through processes such as crude oil distillation, catalytic cracking, thermal cracking, hydrocracking, and petroleum coking. It can also be produced through shale oil processing and coal liquefaction, and can be divided into two categories: light diesel (with a boiling point range of about 180-370 â??) and heavy diesel (with a boiling point range of about 350-410 â??). Widely used in large vehicles, railway locomotives, and ships. The most important use of diesel is for diesel engines in vehicles and ships. Compared with gasoline engines, diesel engines have higher thermal efficiency and lower fuel consumption. Diesel has low energy consumption, so some small cars and even high-performance cars have switched to diesel.

Greetings, we trust this message finds you well. We are reaching out to express our warmest regards and extend an invitation for potential collaboration. In order to better understand your requirements, we kindly request you to share the requested quantity for EN590 10PPM. This information will allow us to tailor our offer to meet your specific needs effectively. With authorized access to reputable refineries, we take pride in ensuring the delivery of high-quality products, providing exceptional service and buyer friendly procedures. Our commitment is to foster a mutually beneficial business relationship that goes beyond expectations. Looking forward to your prompt response and the opportunity to discuss further details. Origin : Kazakhstan / Russia

DIESEL EN590 10PPM,,, Dip and Pay as FOB as Ship To Ship only, from Benghazi, Libya, Only for RWA Buyers.. Price: $0.59 / Liter as Dip and Pay .. Quantity per Vessel is from 10,000 - 30,000 MT / Vessel... Procedures is very simple, easy and clear: ICPO --> Seller send CI to Buyer to sign ---> Buyer makes Block Fund in Dubai against CI ---> Dip test and Injection of product ---> Payment... Please contacting through RWA buyers only... Contact: USAMA

EN590 Diesel (10PPM) ULSD (Ultra Low Sulfur Diesel) is a premium diesel fuel that conforms to the European standard EN590, with an ultra-low sulfur content of only 10 parts per million (PPM). This type of diesel is known for its environmental benefits and is widely used in modern diesel engines.

EN590 was introduced to coincide with the development of new emissions standards across the European Union. The overall goal has been to reduce the sulphur content of diesel fuel. Sulphur had been used as a lubricant in the fuel. Its role is taken by special additives in ULSD. Since 2007, diesel that conforms to EN590 has been referred to as Ultra Low Sulphur Diesel (ULSD) in the European Union. The phrase Ultra Low Sulphur Diesel is governed by different standards in other parts of the world. EN590 describes the physical properties that all automotive diesel fuel must meet if it is to be sold in the European Union, Croatia, Iceland, Norway and Switzerland. The EN 590 had been introduced along with the European emission standards. With each of its revisions the EN 590 had been adapted to lower the sulphur content of diesel fuel since 2007 this is called ultra low sulphur diesel as the former function of sulphur as a lubricant is absent (and needs to be replaced by additives). The quality of European diesel fuels is specified by the EN 590 standard. While these specifications not are mandatory, they are observed by all fuel suppliers in Europe. Automobile diesel en 590 is intended for application in diesel engines. Diesel motor fuel quality meets the requirements of European Standard EN 590. For operation in the conditions of a temperate climate following marks of fuel diesel automobile EN 590 are offered: Grade C limiting filterability temperature -5 C; Grade D limiting filterability temperature -10 C; Grade E limiting filterability temperature 15 C; Grade F limiting filterability temperature -20 C. The entire volume of produced diesel fuel quality meets the requirements for fuels for vehicles of Euro 4 and Euro 5. Low sulfur content in diesel EN 590 reduces emissions of sulfur oxides into the atmosphere, which is especially important for for inhabitants of big cities.

Origin: Kazakhstan or non-Embargo Country Specifications: En590-10ppm, Euro 5 Grade with non-Biodiesel content*** Packaging: Bulk Shipment Delivery Method: FOB, CIF Destination: CIF (ASWP), FOB (Rotterdam, Jurong, Houston, Fujairah, China) MOQ: 50,000 MT/mth (12 mth contract); Trial Lift Available) Note: Price FOB/CIF may vary from listed (slight negotiation possible, depending on order volume)

SPECIFICATION of ULSD 10 ppm Diesel Fuel (EN590) Density at 15 0C Kg.m3 820-845 Polycyclic aromatic hydrocarbons EN 12916 wt% B Max Flash Point EN 2719 0C >55 Cold Filter Plugging Point CFPP EN 116 0C Winter Grade -15 Max Summer Grade 5 Max Distillation EN ISO 3405 Recovered at 250C Vol% 65 Max Recovered at 350C Vol%95% (Vol/Vol) Recovered at 0C 360 Max 85 Min Sulphur EN ISO 20846 EN ISO 20884 Mg/kg 10 Max Carbon Residue (on 10%residue) EN ISO 10370 wt% 0.30 Max Viscosity at 40C EN ISO 3104 Cst 2.0-4.5 Copper Strip Corrosion (3h a5 50C) EN ISO 2160 Fatty acid methyl ester(FAME) content EN 14078 Vol% 7.0 Max Cetane Number EN ISO 5161 EN 15195 51 Min Cetane Index EN ISO 4264 Calculated 46 Min Water EN ISO 12937 Mg/kg 200 Max Particulate Matter EN 12662 Mg/kg 24 Max Oxidation Stability EN ISO 12205 EN 15751 G/m3 H 25 20 Max Min Lubricity (wsd1,4) at 60C EN ISO 12156/1 Um 450 Max Quantity: Minimum 25.000 MT - Maximum 100.000 MT Origin: Kazakstan Loading Port: Gorgia Batumi Payments (SBLC or BG) via MT-760 unconditional, cashed back from top 25-30 world banks with sellers acceptable verbiage.

EN 590 10ppm CIF PRICE $370/360 TRANSACTION WORKING PROCEDURES CIF DELIVERY 1 Buyer issues Irrevocable Corporate Purchase Order (ICPO). 2. Seller issues SPA to Buyer. Within 48 hours Buyer signs seals and returns the SPA to seller. 3. Seller notarizes the contract, at its own expenses and submits Partial Proof of Product (via email) as follows: A) Refinery Commitment to Supply B) Product Passport C) Certificate of Origin D) Export license E) Proforma invoice for the first month of value f) Statement of Availability of Product h) Company Registration 4. Within 5 banking days, Buyer's bank sends Irrevocable Operative SBLC via MT760 or DLC via MT700 according to seller's fiduciary bank verbiage to seller nominated fiduciary offshore bank account for first month shipment, 5. Seller's Bank issues Full POP Documents to the Buyer's Bank alongside with 2% Performance Bond (PB 2%). 6. All parties finalized the signing of the NCNDA/IMFPA. The buyer will be invited by the seller to witness the loading of the product (At Buyers Cost, Maximum of Five Personals/Representatives, Optional). 7. Seller clears vessels from the commercial's terminal (Loading Port), the buyer confirms shipping documents with ship master while seller effects delivery to buyer destination 8. Upon the arrival of cargo at the discharge port, and after SGS/Q&Q at discharge port buyer's bank release to seller's bank payment by TT/MT103 within 7 (Seven) banking days. Seller release payment to all intermediaries as per signed NCNDA IMFPA within 48 hours.

CI DIP AND PAY FOB TTT Rotterdam PROCEDURE 1. Buyer sends ICPO, Company Profile along with current and valid TSA company registration certificate+ buyer passport number + company profile to seller on receipt of seller's soft corporate offer. 2. Seller issues commercial invoice of the product in tanks at the port of Rotterdam and returns commercial invoice. 3.seller will provide the Proof of Product (PPOP) documents for product verification Which include �¯?�¼ Tank Storage Receipt (TSR) �¯?�¼ Certificate of origin �¯?�¼ Statement of Product Availability, �¯?�¼ Authorization to Verify (ATV), and �¯?�¼ Dip Test Authorization (DTA) Letter. 4.After successful verification of the PPOP, the buyer will contact the seller's Tank Storage Company to request a 1-day payment invoice to enable Buyer obtain all the necessary authorization and clearance for a Dip Test schedule. *Or* Buyer must have a minimum of 10 days TSR to avoid one day tank extension. 5.Upon a successful Dip Test conducted in the seller's tanks, the buyer will make the payment for the total product cost based on the SGS Report via MT103. The seller will transfer title ownership to the buyer and send all exportation documents. The buyer can then either transfer the product into a vessel or take over the seller's tanks for further storage. 6. Upon a successful Dip Test conducted in the seller's tanks, the buyer will make the payment for the total product cost based on the SGS Report via MT103. The seller will transfer title ownership to the buyer and send all exportation documents. The buyer can then either transfer the product into a vessel or take over the seller's tanks for further storage. 7. All intermediaries involved in the transaction will sign a Non- Circumvention, Non-Disclosure Agreement (NCNDA) and International Master Fee Protection Agreement (IMFPA). These documents will be forwarded to the seller for endorsement, and the seller will provide the Endorsed NCNDA/IMFPA and Authorization to Sell and Collect (ATSC).

High quality Diesel EN590 10 ppm with origin from Central Asia - No Kazakhstan origin! Loading Ports: FOB Rotterdam, Houston, Fujairah, Jurong Agreement Payment: MT103 Wire Transfer or Telegraphic Transfer (TT) Min MOQ: 50,000 Metric Tons per Month Max MOQ: 300,000 Metric Tons per Month

EN590 10 PPM Oil