Dth Drilling Rig Mounted Suppliers and Manufacturers

DTH Drilling Rig mounted on a MAN Truck up to 600 Mtr

Crawler Mounted Hydraulic DTH Drilling Rig Automatic Crawler Mounted DTH Drill Rig, Crawler Mounted Drilling Rigs Advanced Technology, easy to handle and operate. Borehole Diameter 105ï½?305mm Site Condition CM458 is applicable to all kinds of anchor supporting operation, grouting hole drilling for cofferdam, dam, and base reinforcement. Newly designed hydraulic clamp makes operation easier. Product Features CM458 internal combustion (CM458D Electric) crawler mounted versatile anchor rig adopts diesel engine and hydraulic oil pump assemblies to provide power, allowing rigs to finish moving, rotating, propelling and lifting, as well as angle positioning. During drillingï¼?only the percussive hammer consumes compressed air.  CM458 is applicable to all kinds of anchor supporting operation. In addition, the rig is also applicable to the grouting hole drilling for cofferdam, dam, and base reinforcement. Newly designed hydraulic clamp is a very useful device making operation easier. Model CM458 Borehole diameter 105-305mm Borehole depth 200m Applicable rock hardness f=6-20 Working air pressure 1.2-3.5MPa Air consumption 16-40m/min Feeding stroke 3300mm Rod-changing length 3m Ground clearance 254mm Rotation rate 0-50rpm Rotation torque 5400Nm Travle speed 2Km/h Grade ability 24° Power Yuchai 70KW/Cummins 74KW Electric motor 45KW Dust collector (optional) Hydraulic dry dust collector Wet dust collector Dimension (LxWxH) 6900mmÃ?2200mmÃ?2200mm Weight 6200kg

Crawler Mounted Versatile Well Drilling Rig hydraulic drill rig, Automatic Crawler Mounted DTH Drill Rig A new, efficient, and versatile hydraulic percussive well rig Rated Drilling Depth 500m Site Condition It is mainly applicable to the drilling process of wells, monitor boreholes and geothermal boreholes. Product Features JKS500C Crawler Mounted Versatile Well Drilling Rig is a new, efficient and multifunctional drill rig, mainly applicable to all kinds of drilling process of wells, monitor boreholes, geothermal boreholes, grouting holes of cofferdam, dam and reinforced base, as well as long hole drilling of open pit, anchor reinforcement and defense project. The rig equips with powerful hydraulic motor, heavy-duty hydraulic drilling arm and high pressure DTH percussive hammer, and its drilling speed is faster than other type of rigs.  We are Crawler Mounted Drill Rig Supplier and Crawler Mounted Drill Rig Factory Rated Drilling Depth 500m Drilling Diameter 105-350mm Working Air Pressure 1.05-4.5MPa Air Consumption 16-60m³/min Drilling Rod Diameter Ï?89mm, Ï?102mm, Ï?114mm Max. Lifting Force 25T Axial Pressure ±10T Lifting Force of Small Winch 1.5T Lifting Force of Main Winch 4T (optional) Rotation Torque 9500N.m Rotation Rate 0-40/80rpm Feeding Force 3800mm Lifting Rate 0-18m/min Grade Ability 15° Hydraulic Motor 24kW/380V (optional) Flow of Foam Pump 20L/min (optional) Dimension (L x W x H) 6800mm x 2250mm x 2650mm

Crawler Mounted Hydraulic DTH Drilling Rig Crawler Mounted DTH Drill Rig, Crawler Mounted Drilling Rigs Low operation cost and humanized design. Borehole Diameter 90-165mm Site Condition It is applicable to the blast hole drilling process of hydro project, open pit mining, quarrying, road construction and defense project. Product Features JK590C / JK590 are the new generation of internal combustion (electric) crawler mounted hydraulic DTH drilling rig, the latest updated version of JK590 series.  In contrast with the last generation, they feature lower operation cost and humanized design.  They adopt a 70kW Yuchai diesel engine and hydraulic oil pump station assembly to generate power, allowing rigs to rotation, propelling, lifting, walking and angle positioning.  During operation, only the percussive hammer consumes the compressed air. In contrast with conventional pneumatic drill rigs, JK590C/JK590 consume about 40% to 50% less energy (oil or electricity), and the air displacement of matched air compressor decreases 30% to 50%.  Compared with JK590, JK590C is additionally equipped with dust collection system, and wet type dust collector is optional once water is accessible on site.  JK590C/JK590 are mainly applicable to blasting borehole drilling process of hydro project, open pit mining, quarrying, road construction and defense project. Model JK590 Borehole diameter 90-165mm Borehole depth 50m Applicable rock hardness f=6-20 Working air pressure 1.2-2.4MPa Air consumption 11-21m³/min Feeding stroke 4138mm Rod-changing length 3m Max. horizontal drilling height 3370 Rotation rate 0-80rpm Rotation torque 3000Nm Travle speed 2Km/h, 3Km/h Grade ability 24° Power Yuchai 70KW/Cummins 74KW (optional) Electric motor 45KW Dust collector (optional) Hydraulic dry dust collector Wet dust collector Dimension (LxWxH) 7000mm x 2200mm x 2100mm Weight 6500kg

JK520 Crawler Mounted Hydraulic DTH Drilling Rig Crawler Mounted Hydraulic DTH Drilling Rig Crawler Mounted Drilling Rigs, Crawler Mounted DTH Drill Rig It features its compact design, small footprint, and humanized operation. Borehole Diameter 90-150mm Site Condition It is applicable to the blasting borehole drilling process of hydro project, open pit mining and road construction. Product Features JK520 internal combustion (electric) crawler mounted hydraulic DTH drilling rig is the latest updated product of the "Sharp Sword" series, specially designed for the hydropower project and quarry mining project.  JK520 can drill boreholes of various angles, ranging from horizontal angle to vertical angle. It boasts its better performance, compact design, small footprint and humanized operation. JK520 is equipped with environment-friendly dry type dust collector, and as long as water is accessible on working site, wet type dust collector is optional. Model  JK520 Borehole    diameter 90-150mm Borehole    depth 40m Applicable    rock hardness f=6-20 Working air    pressure 1.2-2.4MPa Air    consumption 11-21m³/min Feeding    stroke 3865mm Rod-changing    length 3m Max.    horizontal drilling height 2510mm Feed    extension 1200mm Ground    clearance 300mm Rotation rate 0-79rpm Rotation    torque 2500Nm Travle speed 2Km/h, 3Km/h Grade ability 25° Power Yuchai    70KW Dust collector (optional) Hydraulic dry dust    collector Wet dust collector Dimension    (LxWxH) 7000mmÃ?2250mmÃ?2250mm Weight 5800kg Wired remote    control Optional

Crawler Mounted Hydraulic DTH Drilling Rig Crawler Mounted DTH Drill Rig, Hydraulic Crawler Drills In contrast to the pneumatic drilling rig, energy consumption (diesel or electricity) saves about 40% to 50%. Borehole Diameter 90-165mm Site Condition CM358A crawler mounted hydraulic DTH drilling rig is mainly applicable to the blast hole drilling process of open pit mining, quarrying, hydropower project and road constructions. Product Features CM358A crawler mounted hydraulic DTH drilling rig adopts diesel engine (or electric motor)  and hydraulic oil pump assembly to provide power, allowing rigs to finish moving, rotating, feeding and lifting, as well as angle positioning.  During operation only the percussive DTH rigs consumes compressed air and in contrast to the conventional pneumatic rigs, CM358A saves about 40%~50% of total energy.  Model CM358A Borehole    diameter 90-165mm Borehole    depth 50m Applicable    rock hardness f=6-20 Working air    pressure 1.2-2.4MPa Air    consumption 11-21m³/min Feeding    stroke 3820mm Rod-changing    length 3m Max.    horizontal drilling height 3370mm Rotation rate 0-80rpm Rotation    torque 3000Nm Travel speed 2Km/h Grade ability 24° Power Yuchai 70KW/Cummins    74KW Electric motor 45KW Dust collector (optional) Hydraulic dry dust    collector Wet dust collector Dimension    (LxWxH) 6900mm Ã? 2200mm Ã?    2200mm Weight 6100kg

JK830 All-In-One DTH Automatic Drilling Rig Crawler Mounted Hydraulic DTH Drilling Rig Hydraulic Crawler Drills. Crawler Mounted Drilling Rigs JK830, the new all-in-one DTH drilling rig which features JK Drilling's latest automation technology, is efficient, reliable and easily operational.  With a FOPS-approved cabin coming standard, the rig is also equipped with automatic pipe exchanger and widened heavy-duty undercarriage that can provides both fast maneuver and better safety.  The hydraulic dust collector meets the requirement of environment protection and is a reliable solution to modern mining with less environmental impacts. More information you can views here Items Specs Unit Value Body Weight kg 24000 Length mm 9785 Width mm 3200 Height mm 3500 Undercarriage Track length mm 3646 Ground contact length mm 2875 Track center distance mm 2200(whole width 2700) Track width mm 500 Ground clearance mm â?¥400 Track oscillation ° ±10° Walking motor Eaton Walking speed Km/h 1.8(low), 2.95(high) Max. tractive force KN 170 Grade ability ° 20° Engine Model QSZ13-C450-30 (Cummins) Type Water-cooled six-cylinder EFI diesel engine Rated power Kw/RPM 335/2100 Fuel tank capacity L 760 Hydraulic pump/valve Main pump Variable load-sensing piston pump Main valve Load-sensing valve Manufacturer Rexroth Air compressor Model Airman SK900 Type Dual stage rotary screw air compressor Working pressure bar 17.5 (medium), 24 (high) Max. air delivery m3/min 23.5 Rotary motor Hydraulic rotation unit Dual motors (Eaton) Rotation rate rpm 0-70 Max. rotation torque N.m 3900 Feeding method Motor-driven planetary gearbox + Chain Fast feeding rate m/ min 30 Feeding rate m/ min 4.7 Max. lifting rate m/ min 5.5 Feeding force kN 0-30 (adjustable) Lifting force kN 30 Feeding boom Length mm 8500 Feeding stroke mm 5500 Feed extension mm 800 Swing angle ° Left 95°, right 35° Drilling arm Type mm Telescopic single straight boom (length 760mm) Tilt angle ° 30°(up), 10°(down) Swing angle ° Left(cabin side)10°, Right 35° Pipe exchanger Pipe diameter mm 102/114 Pipe length m 5 Drilling diameter mm 115-203 Drilling depth m 30 Pipe capacity pc 5+1 Hammer specs 5"/ 6" Dust collector Filter element 20 Collecting method Air pulse jet Dust cover Sliding

Hydraulic Drilling Rig Features JK590C / JK590 are the new generation of diesel (electric) crawler mounted hydraulic DTH drilling rig, the latest updated version of JK590 series. In contrast with the last generation, they feature lower operation cost and humanized design. They adopt a 70kW Yuchai diesel engine and hydraulic pump station assembly to generate power to rotate, feed, lift, walk and angle position. During operation, only the percussive hammer consumes the compressed air. In contrast with conventional pneumatic drill rigs, JK590C/JK590 crawler drilling rig consume about 40% to 50% less energy (diesel or electricity), and the air displacement of matched air compressor decreases 30% to 50%. Compared with JK590, JK590C is additionally equipped with hydraulic dust collection system, and wet type dust collector is optional if water is accessible on site. JK590C/JK590 are mainly applicable to blast hole drilling process of hydropower construction, open pit mining, quarrying, road construction and national defense construction. Hydraulic Drilling Rig Technical Parameters Model JK590 Borehole diameter 90-165mm Borehole depth 50m Applicable rock hardness f=6-20 Working air pressure 1.2-2.4MPa Air consumption 11-21m³/min Feeding stroke 4138mm Rod-changing length 3m Max. horizontal drilling height 3370 Rotation rate 0-80rpm Rotation torque 3000Nm Walking speed 2Km/h, 3Km/h Grade ability 24° Power Yuchai 70KW/Cummins 74KW (optional) Electric motor 45KW Dust collector (optional) Hydraulic dry dust collector Wet dust collector Dimension (LxWxH) 7000mm x 2200mm x 2100mm Weight 6500kg The crawler drilling rigs are widely used in blasthole drilling of mining, hydropower, transportation and defense projects, as well as harbor and channel construction; The hydraulic drilling rigs are specialized in drilling the boreholes of large diameter and depth, for instance, water well drilling and geothermal well drilling.

Technical Specifications Drilling capacity6 1/2" dia holes upto 300mtrs by DTH method. 12 1/2" dia holes upto 300 mtrs by Rotary method. 16" dia holes upto 100 mtrs by Rotary method. NQ hole upto a depth of 150 mtrs by Core Drilling. Mud Pump Capacity 1021 LPM @15.43 kg/cm

Technical Specifications Drilling capacity6 1/2" dia holes upto 300mtrs by DTH method. 12 1/2" dia holes upto 300 mtrs by Rotary method. 16" dia holes upto 100 mtrs by Rotary method. NQ hole upto a depth of 150 mtrs by Core Drilling. Mud Pump Capacity 1021 LPM @15.43 kg/cm

DTH hammer is one of our main products.It strictly matches with API standard and other Chinese industry standards.It is durable for being produced with advanced craftwork and good material.It also has the following advantages: First,Can be used in hard rock application. Second,it Can work on low to high pressure radius. Third,High rate of penetration while utilizing less air.

MAST Box frame using high strength steel (Tensile 760MPa, Yield 700MPa) - Welding condition AWS D1-1 - V-Profi le power head sliding mechanism - Dual leaf chain with safety wire rope or telescopic cylinder type - Double Clamp(HI-ROKTM) equipped on Mast for angle drilling job Equipped with 3,000lb winch POWER HEAD - Two Speed Power Head - Strong and compact helical gears - Separate Water Swivel easy maintenance - Separate Float Cushion Sub - Lubrication/Cooling System with Washable - Lubrication Strainer - Max Torque/Speed 3500psi [345bar] or 40GPM [151LPM] - Eaton VIS series Two Speed Motor, 325cc/rev

JZ600 DTH drilling Rig

JZ600 DTH drilling Rig

JZ600 DTH drilling Rig

Gypsum rocks, gypsum powder, rock salt (industrial salt and deicing salt), food grade salt, sodium bicarbonate, limestone, white limestone (marble chips), sulphur (granular, lumps).

304 stainless steel pipes, carbon steel pipes, galvanized steel pipes, seamless pipes, stainless steel pipes, used drill bits.

1> Feature : Adjustable 2> 90° wall mount hinge , 180° glass to glass 3> Glass thickness : 8 mm~12 mm 4> Max door weight : 36 kg (with 2 hinges) 5> Material : Solid Brass 6> Some models do have auto self-closing function within 25° at both sides 7> Mickey Mouse ear design.