Jk520 Crawler Mounted Hydraulic Dth Drilling Rig

Hydraulic Drilling Rig Features JK590C / JK590 are the new generation of diesel (electric) crawler mounted hydraulic DTH drilling rig, the latest updated version of JK590 series. In contrast with the last generation, they feature lower operation cost and humanized design. They adopt a 70kW Yuchai diesel engine and hydraulic pump station assembly to generate power to rotate, feed, lift, walk and angle position. During operation, only the percussive hammer consumes the compressed air. In contrast with conventional pneumatic drill rigs, JK590C/JK590 crawler drilling rig consume about 40% to 50% less energy (diesel or electricity), and the air displacement of matched air compressor decreases 30% to 50%. Compared with JK590, JK590C is additionally equipped with hydraulic dust collection system, and wet type dust collector is optional if water is accessible on site. JK590C/JK590 are mainly applicable to blast hole drilling process of hydropower construction, open pit mining, quarrying, road construction and national defense construction. Hydraulic Drilling Rig Technical Parameters Model JK590 Borehole diameter 90-165mm Borehole depth 50m Applicable rock hardness f=6-20 Working air pressure 1.2-2.4MPa Air consumption 11-21m³/min Feeding stroke 4138mm Rod-changing length 3m Max. horizontal drilling height 3370 Rotation rate 0-80rpm Rotation torque 3000Nm Walking speed 2Km/h, 3Km/h Grade ability 24° Power Yuchai 70KW/Cummins 74KW (optional) Electric motor 45KW Dust collector (optional) Hydraulic dry dust collector Wet dust collector Dimension (LxWxH) 7000mm x 2200mm x 2100mm Weight 6500kg The crawler drilling rigs are widely used in blasthole drilling of mining, hydropower, transportation and defense projects, as well as harbor and channel construction; The hydraulic drilling rigs are specialized in drilling the boreholes of large diameter and depth, for instance, water well drilling and geothermal well drilling.

Crawler Mounted Hydraulic DTH Drilling Rig Crawler Mounted DTH Drill Rig, Crawler Mounted Drilling Rigs Low operation cost and humanized design. Borehole Diameter 90-165mm Site Condition It is applicable to the blast hole drilling process of hydro project, open pit mining, quarrying, road construction and defense project. Product Features JK590C / JK590 are the new generation of internal combustion (electric) crawler mounted hydraulic DTH drilling rig, the latest updated version of JK590 series.  In contrast with the last generation, they feature lower operation cost and humanized design.  They adopt a 70kW Yuchai diesel engine and hydraulic oil pump station assembly to generate power, allowing rigs to rotation, propelling, lifting, walking and angle positioning.  During operation, only the percussive hammer consumes the compressed air. In contrast with conventional pneumatic drill rigs, JK590C/JK590 consume about 40% to 50% less energy (oil or electricity), and the air displacement of matched air compressor decreases 30% to 50%.  Compared with JK590, JK590C is additionally equipped with dust collection system, and wet type dust collector is optional once water is accessible on site.  JK590C/JK590 are mainly applicable to blasting borehole drilling process of hydro project, open pit mining, quarrying, road construction and defense project. Model JK590 Borehole diameter 90-165mm Borehole depth 50m Applicable rock hardness f=6-20 Working air pressure 1.2-2.4MPa Air consumption 11-21m³/min Feeding stroke 4138mm Rod-changing length 3m Max. horizontal drilling height 3370 Rotation rate 0-80rpm Rotation torque 3000Nm Travle speed 2Km/h, 3Km/h Grade ability 24° Power Yuchai 70KW/Cummins 74KW (optional) Electric motor 45KW Dust collector (optional) Hydraulic dry dust collector Wet dust collector Dimension (LxWxH) 7000mm x 2200mm x 2100mm Weight 6500kg

Crawler Mounted Hydraulic DTH Drilling Rig Automatic Crawler Mounted DTH Drill Rig, Crawler Mounted Drilling Rigs Advanced Technology, easy to handle and operate. Borehole Diameter 105ï½?305mm Site Condition CM458 is applicable to all kinds of anchor supporting operation, grouting hole drilling for cofferdam, dam, and base reinforcement. Newly designed hydraulic clamp makes operation easier. Product Features CM458 internal combustion (CM458D Electric) crawler mounted versatile anchor rig adopts diesel engine and hydraulic oil pump assemblies to provide power, allowing rigs to finish moving, rotating, propelling and lifting, as well as angle positioning. During drillingï¼?only the percussive hammer consumes compressed air.  CM458 is applicable to all kinds of anchor supporting operation. In addition, the rig is also applicable to the grouting hole drilling for cofferdam, dam, and base reinforcement. Newly designed hydraulic clamp is a very useful device making operation easier. Model CM458 Borehole diameter 105-305mm Borehole depth 200m Applicable rock hardness f=6-20 Working air pressure 1.2-3.5MPa Air consumption 16-40m/min Feeding stroke 3300mm Rod-changing length 3m Ground clearance 254mm Rotation rate 0-50rpm Rotation torque 5400Nm Travle speed 2Km/h Grade ability 24° Power Yuchai 70KW/Cummins 74KW Electric motor 45KW Dust collector (optional) Hydraulic dry dust collector Wet dust collector Dimension (LxWxH) 6900mmÃ?2200mmÃ?2200mm Weight 6200kg

Crawler Mounted Versatile Well Drilling Rig hydraulic drill rig, Automatic Crawler Mounted DTH Drill Rig A new, efficient, and versatile hydraulic percussive well rig Rated Drilling Depth 500m Site Condition It is mainly applicable to the drilling process of wells, monitor boreholes and geothermal boreholes. Product Features JKS500C Crawler Mounted Versatile Well Drilling Rig is a new, efficient and multifunctional drill rig, mainly applicable to all kinds of drilling process of wells, monitor boreholes, geothermal boreholes, grouting holes of cofferdam, dam and reinforced base, as well as long hole drilling of open pit, anchor reinforcement and defense project. The rig equips with powerful hydraulic motor, heavy-duty hydraulic drilling arm and high pressure DTH percussive hammer, and its drilling speed is faster than other type of rigs.  We are Crawler Mounted Drill Rig Supplier and Crawler Mounted Drill Rig Factory Rated Drilling Depth 500m Drilling Diameter 105-350mm Working Air Pressure 1.05-4.5MPa Air Consumption 16-60m³/min Drilling Rod Diameter Ï?89mm, Ï?102mm, Ï?114mm Max. Lifting Force 25T Axial Pressure ±10T Lifting Force of Small Winch 1.5T Lifting Force of Main Winch 4T (optional) Rotation Torque 9500N.m Rotation Rate 0-40/80rpm Feeding Force 3800mm Lifting Rate 0-18m/min Grade Ability 15° Hydraulic Motor 24kW/380V (optional) Flow of Foam Pump 20L/min (optional) Dimension (L x W x H) 6800mm x 2250mm x 2650mm

Description: The PDTHR-150 drill rig is ideal for water well drilling application in rock formation. Thanks to its simple and compact design, excellent performance, high accessibility and reliability at afford cost in its class. The PDTHR-150 rigâ??s flexibility means it can be mounted on Crawler, two truck versions and on local truck matching the rig to the terrain it will be used. Can be used for both DTH and mud rotary drilling. Key features: Proven technology ensures easy maintenance and more productive. The rig can be customize as per customer requirement All the actuators are operated by proportional control valves. Technical specification: Drill rod handling 10 feet (3.0 meter) Drilling depth 500 feet (150 meters) Drilling diameter 4.5 inch (114 mm) - 8 inch (203 mm) Pull up force 5,000 kgf Air compressor 600 cfm/200 psi Mud pump flow 600 lpm - 500 lpm

DTH Drilling Rig mounted on a MAN Truck up to 600 Mtr