Dimethoate 30% E C Suppliers and Manufacturers

1> Back To Back Towel Bars(with and without metal washers) 2> Pull handled available in various sizes with back to back Towel bars 3> Glass thickness : 6 mm~12 mm 4> Size: 19 x 6"/8"/10/12"/18"/24" C/C 5> Material :304 Stainless Steel / #62 Brass Tubular 6> Chrome plated, Brushed Nickel, Brass Polished, Polished Chrome, Gold Plated, Oil Rubbed Bronze.

We supply 25mm, 26mm Plain Particle Boards for filling inside the doors. 2440x1220x26mm plain particle board shall weigh about 40kgs. We do particle board starting 9mm to 40mm and above for various purposes like lamination grade fully sanded on both faces, for routing purpose, furniture backing etc. 26mm(non sanded) :520Kg/m3 - E2 Grade 30 to 64mm- E1, High Moisture Resistance, Both Sides sanded 26mm(non sanded) :520Kg/m3 - E2 Grade 30 to 64mm- E1, High Moisture Resistance, Both Sides sanded, suitable for Fire door -tested to BS standard We can also adjust the density of board as per our customer requirement. Our plain particle boards are priced competitive. Please contact us for more details.

Specifications 1.odorless 2.low VOC 3.antimicrobial 4. mildew resistant 5.environmentally friendly 6.waterproof 7.Scrub resistance Description It is an enhanced mildew proof product adopting nano-scale Ag+ antimicrobial and mildew proof technology, integrating odorless formula, with fresh product smell, smooth paint film, durable and beautiful paint.As an affordable and environmentally friendly product with excellent decorative performance, it is characterized by fresh smell, environmental health, strong covering power, large painting area, convenient constructionapplication, short constructionapplication period, etc. Specification Data Solvent: Water Pigment: Non-lead pigment Theoretical Solids By Volume: more than 50% Theoretical Coverage: Theoretically 1 litre of this product covers 12 sqm in 1 coat Coverage varies considerably depending on application methods and surface roughness and porosity. Shelf Life: Minimum 12 months at 77F(25C) unopened and store in cool and dry places. Recommended Film Thickness: Wet: 80 micron Dry: 30 micron Dry Time: At 77F (25C) and 50% R.H. to recoat Touch Dry: 1 hours Recoat : 2-3 hours Application: Brush, Roll, conventional spray or Airless Spray. Thinner: Thin up 15% depend on different application methods & temperature. Do not over thin by adding more than 30% water. Brush or Roller: For sealing new or bare surfaces thin with up to 1 part of clean water to 5-10 parts of paint(10%-20%) Conventional Spray: Add up to 1 part clean water to 5 parts paint(20%) Airless spray: do not thin Clean-up: Clean up equipment with water Typical painting system Substrate System All kinds of Wall surfaces 1.Alkali Resistance Primer (1 coat) 2.Emulsion Wall Paint (2 coats)

Product's name: Wood Charcoal Keywords: Flat cube charcoal,Flat cube burning,Lump charcoal , Lump Shisha Charcoal, Silver Charcoal. Specification as following: Specification: Grade A Material (Composition) 90% bamboo charcoal & 10% pure nature bonding Moisture Content less than 6% Fixed Carbon More than 85% Ash 4% Heat value 7000J-8000J Volatile Matter 2% Hardness 90% Temperature (Burning) 700-880°C Burning Time 4-5 hours Others feature smokeless,odourless,innocuity, no bursting it is an environment-friendly products , no any chemicals Size: hexagon shape square diameter outer diameter Æ 40mm 40x40mm inner diameter Æ 10mm Æ 10mm Length 18-25cm 18-25cm Weight (Average) 285g-295/pc 285-295g/pc

Jumbo Bags : Name : Big bag/Bulk bag/Jumbo bag/FIBC/Super sack/Ton bag Raw Material : Polypropylene virgin material Color : White, blue, Beige, or whatever Printing : Onside or both sides in multi-colors,offset print color print Size : As the customers requirement Type of bag : U-panel,Circular,baffle Weave : 10x10,12x12,can be customized or as the customer requirement Denier : 700D to1000D Weights/m2 : 120gm to 240 gm or as the customers requirement Feature : Breathable and airy, anti-static, UV stabilization, reinforcement dust-proof, moisture- proof Sealing : Single/double fold saw bottom Top Filling : Top full open,top skirt,top filling spout Bottom : Flat bottom,discharge spout Saftey factory : From 3:1 to 6:1 Liner : coated or with liner bag for moisture proof Usage : sand,cement, chemical,mineral,sugar,food,flour,etc. Packing : 20pcs/bundle(bale), or as the customized MOQ : Above 1000pcs Delivery Time : 20-30 days after place an order Trade Term : FOB Payment Term : T/T

1.We use imported base paper from Germany. For solid color, base paper most 80 to 120GSM. For wood base paper is between 70-85 gsm 2. High quality water-base ink- Available over 200 shades in Solid colors and wood grains 3. With clear texture ,high Fidelity meeting international standards. 4. With smooth surface coating 5. Germproof, mould proof, antistatic and wear-resistance. 6. Green environmental protection and Odorlessness which Conforms to the GB18584-2001 standard requirement 7. Can be used for the hot press molding craft, the production efficiency is high. 8. Melamine paper takes shape easily, is widely used for the panel furniture and the decorative yarn. Product Specification: Width: 1230-1260mm or 1300-1800mm Length: 500-1000m For storing: Put it in room to a cool and dry place keep the temperature 20-25°C in room. The best humidity is: 50-60% We can also give you complete decorative solution with Matching Melamine Edge Banding, PU Paper. If you need just need Melamine/prelaminated boards either in MDF / Particle board we can also do so

Sun Pesticides Pvt Ltd Product Dimethoate 30% E.C (SUNGOR). It is highly effective synthetic pyrethroid compound which contains 0.4% Fenvalerate active ingredient w/w and balance adjuvants Product Name:- Dimethoate 30% E.C Model Name:- SUNGOR Product Category:- (Insecticide) Crops:- Fig, Mango, Potato, Banana, Apricot, Rose, Cabbage & Cauliflower, Tomato, Citrus, Onion, Brinjal, Bhindi, Chillies, Apple. Direction of Use P.P. Equipment :-Knapsack sprayer, foot sprayer, compression knapsack sprayer, compression knapsack battery sprayer and ASPEE-HTP power sprayer Precaution:- 1. Keep away from foodstuffs, empty foodstuff containers and animals food. 2.. Avoid contact with mouth, eyes and skin. 3.. Avoid inhalation the spray mist. Spray in the direction of wind. 4 . Wash thoroughly the contaminated clothes and parts of the body after spraying. 5. Do not smoke, drink, eat and chew anything while spraying. 6. Wear full protective clothing while mixing and spraying. Packing Size :- 100ML, 250ML, 500ML, 1L, 5L, 10L Manufactured By: Sun Pesticides Pvt Ltd G-195 Sarna Dungar Industrial Area Jhotwara Jaipur Rajasthan 302012

Can supply TEXTILE WASTE WHITE FABRIC CLIPS CUTTINGS NON WOVEN BALES Composition of clips cuttings approx 60 POLYESTER approx 30 VISCOSE and approx 10 TENCEL LYOCELL May have foreign bodies approx 1 comes from baling procedure POST INDUSTRIAL MATERIALS COME FROM FACTORY THAT PRODUCE BABY WIPES Can load in 1x40HC container approx 22 MT 10

"Gillette Blue II Ultra Grip 1'S (Hangcard)". - Razors that have two blades. - Convenient to use - Equipped with lubricating strip containing Aloe and Vitamin E that prevents irritation to your skin .

Nescafe 3 in 1 instant coffee mix. Original product by Nestle Indonesia Available in commercial pack 30's per bag and wholesalers pack of 100's per bag

The mentha water is steam distilled from fresh blossoms Bulgarian mentha piperita of during the months of may and June of each year. It is a completely natural product for skin and hair application. Transparent liquid, colorless; specific aroma; essential oil content 0.03, ethyl alcohol content 3.44, relative density 20 C 0.9827, PH 5.25, microbiological purity - corresponds to standard. Benefits: Has an antiseptic and anti-inflammatory effect on the skin. Soothes the skin after sunburns or razor cuts. Gently cleanses and tightens the pores of the oily skin. Moisturizes the skin and improves its general condition.

Rose petals are edible and a traditional ingredient in the foods in the middle east, especially in desserts. In addition to sprinkling rose water on desserts, it is sprinkled on guests as a sign of welcome before the meal. Rose petal jam and cordial are still popular in Europe. Rose hips are a rich source of vitamin c and can be made into a conserve or jam. The petals are then eaten as a candy or used to decorate desserts. Roses are used for excess menstrual bleeding, digestive problems, gonorrhoea, and for liver symptoms. Delicious medicinal preparations can be made from rose petals, including syrup of roses, honey of roses, sugar of roses, rose water, and vinegar of roses. Rose petals have been used for conditions such as fevers, headache, jaundice, joint pain, fainting, weakness, trembling of the heart, poor digestion, and infection.

Strivectin Multi-action Super-c Retinol 30 Ml

Plate Iron Scrap is a material that a visual inspection appears of regular shape. This by-product is formed after slag processing in electrometallurgical furnaces. Its chemical composition is homogeneous and stable with about Fe 90% and P around 1.4%, S 0.8% and C 1.4%. The max weight of each pieces is up to 1 ton. The material can be loaded loose in 20 heavy duty container. For further details feel free to contact us.

We offer a wide plethora of Zinc in many forms including LME registered and non registered Special High Grade Ingots and Jumbos, cathodes, dust, foil, granules, powder, pieces, anodize activated powder, shot, and a mossy form. Zinc is a bluish-white, lustrous metal. It is brittle at ambient temperatures but is malleable at 100 to 150°C. It is a reasonable conductor of electricity, and burns in air at high red heat with evolution of white clouds of the oxide. Plating thin layers of zinc on to iron or steel is known as galvanizing and helps to protect the iron from corrosion.

We are able to supply Tin in many forms including LME registered and non registered, ingots, slabs, bars, foil, granules, powder, anodized activated powder, shot, wire, sticks, ingots, and “mossy tin”. Tin is a silvery-white metal, is malleable, somewhat ductile, and has a highly crystalline structure. The element has two colours, with a cubic structure which changes at allotropic forms. On warming it is grey, the ordinary form of the metal. When Tin is cooled below 13.2°C, it changes slowly from white to grey or tetragonal structure. This change is affected by impurities such as Aluminium and Zinc, and can be prevented by small additions of Antimony or Bismuth.

This Cast Iron slag is a by-product derived from the production of thermal insulating products. The byproduct is a ferrous slag which can be utilised in an electric arc furnace to produce crude steel. Physical Description On visual inspection, it appears to be made up of irregular shapes. Dimension: 500mm -800mm Chemical Composition Its chemical composition is homogeneous and stable with Fe contents in the range of 90 +/- 5% and P contents < 0.6% S around 0.15% and C% around 3.5%. Packing: Loose in container Loading: in 20 Container For further information, please feel free to contact us.

Mill scale, is formed on the outer surfaces of plates, sheets or profiles when they are being produced by rolling hot iron or steel billets in rolling or steel mills. It looks like a hard brittle sand and is mainly composed of iron oxides, mostly ferric, and is bluish black in color. Being produced during the reheating, conditioning and hot rolling operation for the production of steel articles, the mill scale initially adheres to the steel surface and protects it from atmospheric corrosion, provided no break occurs in this coating. From the chemical and physical analysis performed on the scrap, and according to the european environmental rules, the material has been classified as a special non dangerous waste, listed in green list In particular the mill scale can be classified as follows: Einecs (european commission no.): 266-007-8 Waste code: 10 02 10 Basel code: b 12 30 Hs code: 2619.00

We are proposing about 2000tons of iron slag derived from the desulphurisation skimming process. This material is a iron by- product that is encapsulated in varying levels of contaminants (S,Mg,Si). In order to enhance its usability, the material is processed and screened. We can propose two specifications of Iron Slag - European Code: 19.12.01 - Basel Code: B1010 - HS Code: 2619.0020 - Quantity: 2000 tons currently available - Monthly quantity: 500-1000 tons depending on production - Size: 350 1200 mm - Fe content: from 77 to 86% - C content: above 2,5-3% - Bulk density: 2,8-3,4 tons/m3 - Loading type: loose in 20 (26-27 tons on average) The level of Fe% in the slag has been estimated by water displacement test. For any further information please feel free to contact us