1.Description D111 This is a kind of cation exchange resin which has carboxylic acid groups [-COOH] in the macroporos acrylic acid-divinylbenzene copolymer. It works with large exchange capacity, speedy exchange ability, small volumn change, good physical strength and chemical stability, excellent capabilities of contamination and oxidation resistance etc. 2.Typical Physical and Chemical Properties: Items Specification Polymer Matrix Structure Acrylic Crosslinked with DVB Physical Form and Appearance Ivory opaque spherical particle Functional Groups R-COOH Ionic Form ,as shipped H+ Total Capacity, H+ form, wet, volumetric 2.7 eq/l min Moisture Retention, H+ form 55-65% Particle Size Range 0.3mm-1.2mm
1.Description D111 This is a kind of cation exchange resin which has carboxylic acid groups [-COOH] in the macroporos acrylic acid-divinylbenzene copolymer. It works with large exchange capacity, speedy exchange ability, small volumn change, good physical strength and chemical stability, excellent capabilities of contamination and oxidation resistance etc. 2.Typical Physical and Chemical Properties: Items Specification Polymer Matrix Structure Acrylic Crosslinked with DVB Physical Form and Appearance Ivory opaque spherical particle Functional Groups R-COOH Ionic Form ,as shipped H+ Total Capacity, H+ form, wet, volumetric 2.7 eq/l min Moisture Retention, H+ form 55-65% Particle Size Range 0.3mm-1.2mm
1.Description D111 This is a kind of cation exchange resin which has carboxylic acid groups [-COOH] in the macroporos acrylic acid-divinylbenzene copolymer. It works with large exchange capacity, speedy exchange ability, small volumn change, good physical strength and chemical stability, excellent capabilities of contamination and oxidation resistance etc. 2.Typical Physical and Chemical Properties: Items Specification Polymer Matrix Structure Acrylic Crosslinked with DVB Physical Form and Appearance Ivory opaque spherical particle Functional Groups R-COOH Ionic Form ,as shipped H+ Total Capacity, H+ form, wet, volumetric â?¥2.7 eq/l min Moisture Retention, H+ form 55-65% Particle Size Range 0.3mm-1.2mm
1.Description D111 This is a kind of cation exchange resin which has carboxylic acid groups [-COOH] in the macroporos acrylic acid-divinylbenzene copolymer. It works with large exchange capacity, speedy exchange ability, small volumn change, good physical strength and chemical stability, excellent capabilities of contamination and oxidation resistance etc. 2.Typical Physical and Chemical Properties: Items Specification Polymer Matrix Structure Acrylic Crosslinked with DVB Physical Form and Appearance Ivory opaque spherical particle Functional Groups R-COOH Ionic Form ,as shipped H+ Total Capacity, H+ form, wet, volumetric 2.7 eq/l min Moisture Retention, H+ form 55-65% Particle Size Range 0.3mm-1.2mm
1.Description D111 This is a kind of cation exchange resin which has carboxylic acid groups [-COOH] in the macroporos acrylic acid-divinylbenzene copolymer. It works with large exchange capacity, speedy exchange ability, small volumn change, good physical strength and chemical stability, excellent capabilities of contamination and oxidation resistance etc. 2.Typical Physical and Chemical Properties: Items Specification Polymer Matrix Structure Acrylic Crosslinked with DVB Physical Form and Appearance Ivory opaque spherical particle Functional Groups R-COOH Ionic Form ,as shipped H+ Total Capacity, H+ form, wet, volumetric 2.7 eq/l min Moisture Retention, H+ form 55-65% Particle Size Range 0.3mm-1.2mm
1.Description D111 This is a kind of cation exchange resin which has carboxylic acid groups [-COOH] in the macroporos acrylic acid-divinylbenzene copolymer. It works with large exchange capacity, speedy exchange ability, small volumn change, good physical strength and chemical stability, excellent capabilities of contamination and oxidation resistance etc. 2.Typical Physical and Chemical Properties: Items Specification Polymer Matrix Structure Acrylic Crosslinked with DVB Physical Form and Appearance Ivory opaque spherical particle Functional Groups R-COOH Ionic Form ,as shipped H+ Total Capacity, H+ form, wet, volumetric2.7 eq/l min Moisture Retention, H+ form 55-65% Particle Size Range 0.3mm-1.2mm
1.Description D111 This is a kind of cation exchange resin which has carboxylic acid groups [-COOH] in the macroporos acrylic acid-divinylbenzene copolymer. It works with large exchange capacity, speedy exchange ability, small volumn change, good physical strength and chemical stability, excellent capabilities of contamination and oxidation resistance etc. 2.Typical Physical and Chemical Properties: Items Specification Polymer Matrix Structure Acrylic Crosslinked with DVB Physical Form and Appearance Ivory opaque spherical particle Functional Groups R-COOH Ionic Form ,as shipped H+ Total Capacity, H+ form, wet, volumetric 2.7 eq/l min Moisture Retention, H+ form 55-65% Particle Size Range 0.3mm-1.2mm
1. Description D113 is a premium grade, weak acid, macroporous, cation resin supplied in the hydrogen form as moist, tough, uniform, spherical beads. Its ion exchange functionality is derived from the carboxylic group, which is easily converted to the hydrogen form and has a high affinity for divalent ions.D113 is intended for use in hydrogen cycle dealkalization, deionization, and chemical processing applications. D113 can also be supplied in the sodium form for use in sodium cycle applications such as softening and removal of heavy metal cations. 2.Typical Physical and Chemical Properties: Items Specification Polymer Matrix Structure Acrylic Crosslinked with DVB Physical Form and Appearance Macroporous spherical beads Functional Groups R-COOH Ionic Form ,as shipped H+ Total Capacity, H+ form, wet, volumetric 4.2 eq/l min Moisture Retention, H+ form 45-52% Particle Size Range 0.3mm-1.2mm
Product Name Weak acid cation exchange resin (Macroporous) Sanxing Resin Article#: D113 Competitive Equivalents Amberlite IRC-84; Lewatit-CNP80 Application: Mainly used in industrial water treament, expecially to remove bicarbonate,carbonate, and other alkaline salts; Also can be used for zinc and nickel recycling, separation and purification of biochemical drugs. Typical physical and chemical properties: Matrix Structure acrylic acid series Appearance Milky or faint yellow non-transparent spherical grain Ionic form H Moisture content (%) 45.00~52.00 Total exchange capacity (mmol/g)
Product Name Weak acid cation exchange resin (Macroporous) Bairy Resin Article#: D113 Competitive Equivalents Amberlite IRC-84; Lewatit-CNP80 Application: Mainly used in industrial water treament, expecially to remove bicarbonate,carbonate, and other alkaline salts; Also can be used for zinc and nickel recycling, separation and purification of biochemical drugs. Typical physical and chemical properties: Matrix Structure acrylic acid series Appearance Milky or faint yellow non-transparent spherical grain Ionic form H Moisture content (%) 45.00~52.00 Total exchange capacity (mmol/g) â?¥10.80 Total exchange capacity (mmol/ml) â?¥4.40 Shipping weight (g/ml) 0.72~0.80 True density (g/ml) 1.14~1.20 Particle size range (%) (0.315mm~1.250mm)â?¥95.0 Lower limit size (%) (ï¼?0.315mm)â?¤1.0 Effective size (mm) 0.400~0.700 Uniformity coefficient â?¤Â 1.60 Sphericity after attrition  % â?¥Â 90.00 Reference indexes in using PH range 4~14 Max. operation temperature (â??) 100 Swelling upon complete conversion (%) â?¤Â 70 Working exchange capacity (mmol/L) â?¥Â 1600 Working flow rate (m/h) 15~30
Corn starch,wheat starch,maltodextrin,dried apricot,pistachio, pistachio paste,raisin,hazelnut,hazelnut paste, cocoa powder, cocoa butter, organic cocoa powder, organic cocoa bean, cocoa bean,shea butter,wheat flour,corn flour, canned tuna, sardines, fruit juice, concentrates, pulp, fruit puree, mango puree,pectin, sunflower oil, sunflower kernel, sunflower lecithin, soya lecithin, desiccated coconut, coconut virgin oil, coconut flour, red split lentil, beta caroten,glucose, glucose syrup,corn gluten meal, acetic acid, caustic soda flakes, citric acid, ethanol, monomers, phosphoric acid, ammonium bicarbonate, maleic acid, stearic acid, sulphuric acid, sulfamic acid, calcium chloride, polyol, epoxy resin, pvc resin, fluorspar,guar gum,titanium ore.Distrubution and logistics
Capsicum Oleoresin is prepared by extracting the crushed capsicum (Capsicum Annum Linn) with volatile solvents by percolation method. It contains the pungent principles, capsicin not less that 8 percent. It also contains the red colouring matter called Capsanthin. This product is a powerful irritant and a carminative, which is also used as a counter irritant in lumbago and neuralgia. It can also be used to treat stomach ache that involves poorly functioning stomach muscles and as an antibacterial agents. Extraction of oleoresin capsicum from peppers involves finely ground capsicum, from which capsaicin is extracted in an organic solvent such as ethanol. The solvent is then evaporated, and the remaining wax like resin is the oleoresin capsicum. An emulsifier such as propylene glycol is used to suspend the OC in water, and pressurized to make it aerosol in pepper spray. The high performance liquid chromatography (HPLC) method is used to measure the amount of capsaicin within pepper sprays. Scoville Heat Units (SHU) are used to measure the concentration or "heat" of pepper spray. A synthetic analogue of capsaicin, pelargonic acid vanillylamide (desmethyldihydrocapsaicin), is used in another version of pepper spray known as PAVA spray which is used in the United Kingdom. Another synthetic counterpart of pepper spray, pelargonic acid morpholide, was developed and is widely used in Russia. Its effectiveness compared to natural pepper spray is unclear. Pepper spray typically comes in canisters, which are often small enough to be carried or concealed in a pocket or purse. Pepper spray can also be bought concealed in items such as rings. There are also pepper spray projectiles available, which can be fired from a paintball gun. It has been used for years against demonstrators. Derived from chilli peppers, oleoresin capsicum is the active ingredient in pepper spray and in some topical pain relievers.
The primary use of Ammonium Sulphate is as a fertilizer for alkaline soils. In the soil the ammonium ion is released and forms a small amount of acid, lowering the pH balance of the soil, while contributing essential nitrogen for plant growth. The main disadvantage to the use of Ammonium Sulphate is its low nitrogen content relative to Ammonium Nitrate, which elevates transportation costs. It is also used as an agricultural spray adjuvant for water soluble insecticides, herbicides, and fungicides. There it functions to bind iron and calcium cations that are present in both well water and plant cells. It is particularly effective as an adjuvant for 2,4-D (amine), glyphosate and glufosinate herbicides.
S.N CAS No. Item 1 9003-07-0 Poly(propylene) 2 25766-59-0 Polycarbonate resin 3 26062-94-2 Poly(butylene terephthalate) 4 9002-86-2 poly(vinyl chloride) 5 9002-88-4 Polythene 6 9003-56-9 ABS Resin 7 25212-74-2 Poly(1,4-phenylene sulfide) 8 25135-51-7 Polysulfone 9 110-63-4 Butane-1,4-diol 10 9003-35-4 Phenol-formaldehyde resin 11 9003-53-6 Polystyrene 12 9011-14-7 Poly(methyl methacrylate) 13 26009-03-0 Poly(2-Hydroxyacetic acid) 14 24980-41-4 Polycaprolactone 15 31533-76-3 Polyphenyl ether 16 29658-26-2 PEEK 17 9002-81-7 PolyoxyMethylene 18 26023-30-3 Polylactic acid 19 63428-84-2 Polyamide 20 25038-59-9 Polyethylene terephthalate
Ferrite Magnet is manufactured from oxide material by powder metallurgical process. Its advantages include: low-cost excellent corrosion resistance, resistance to be demagnetized etc. The normal working temperature of Ferrite Magnet is between-40C and +250C.It can be magnetized before or after assembling. Generally, Ferrite Magnet can be machined to regular shapes like segments, blocks, rings and discs etc. The normal grades for sintered Ferrite Magnets are Y10,TY25, Y30, Y30BH, Y35, etc. Advantages of Ferrite Magnet: Ferrites have isotropic characteristics, weak magnetic performance, has the same magnetic performance in any direction, multipolar magnetic charge. The main raw material of ferrite is oxides, so it is not corroded by high temperature, high humidity or chemicals (except strong acid and base); with excellent diamagnetic impedance, no flux loss before and after assembly and magnetic charging; working temperature is-40C to + 250C, poor temperature coefficient; Br temperature coefficient is-0.2% /C, 0.2% under Br, etc. per 1 Cincrease; high hardness, wire cutting and grinding; ferrite is brittle and fragile during production and transportation. magnetic requirements and good for strict working environment requirement.
S.N CAS No. Item 1 100-21-0 Terephthalic acid 2 67763-03-5 Silsesquioxanes 3 9003-01-4 Acrylic acid 4 1333-86-4 Carbon black 5 80-62-6 Methyl methacrylate 6 61788-97-4 Haloperidol 7 75-38-7 1,1-difluoroethylene 8 100-42-5 Styrene 9 9002-84-0 Poly(tetrafluoroethylene) 10 124-04-9 Adipic acid 11 107-21-1 Ethylene glycol 12 126-30-7 Neopentyl glycol 13 85-44-9 Phthalic anhydride 14 106-89-8 Epichlorohydrin 15 9003-08-1 Amino resin 16 9006-03-5 Chlorinated rubber 17 13463-67-7 Titanium dioxide 18 12227-89-3 Iron Oxide Black 19 922-67-8 Methylpropiolate 20 538-24-9 Trilaurin 21 9011-05-6 Urea formaldehyde 22 79-41-4 Methacrylic acid 23 1314-13-2 Zinc oxide 24 80-05-7 Bisphenol A 25 121-91-5 Isophthalic acid
METHOD OF APPICATION: * Mastic compound application consist of two coats of. Primer ,Primer and followed by Mastic compound in recommended thickness, ranging from min. 12mm to 25mm in one or two layers to achieve desired thickness without any pin hole and crack. 1). Surface preparation and application of Primer: Refer application method of Primer. 2). After doing necessary surface preparation and application of primer coating, area to be installed with Mastic compound should be divided in to equal no. bays. To maintain even thickness required, place wooden or aluminum batten. Mastic compound is then broken in small pieces and put it in heating pan. While heating, keep material moving to avoid burning. It is heated until it comes in a uniform consistency and then applied on the surface and works it with wooden float, to achieve uniform thickness and smooth surface free from any pinholes. CHEMICAL RESISTANCE PROPERTIES: * Mastic compound has good resistance to weak, diluted acids, alkalis salts etc. It is not recommended to use against strong acids, oxidizing acid solvents, oil and fats STORAGE & PACKING: * Keep Mastic compound away from direct sunlight, heat solvents etc. Under this condition, its shelf life is unlimited. It is supplied in cake form and approx. wt. is 10 kgs. HEALTH & SAFETY: * Handle melted Mastic compound compound very carefully . Avoid contact with skin. It is advisable to wear protective wears at the time of use of Mastic compound and all other our products. This information, given in good faith, is based on results gained from experience and tests. However, all recommendations or suggestions are made without guarantee since the conditions of use are beyond our control.
Refractory bricks, high alumina bricks, acid proof bricks, tiles and castables, all mortars and fire clay, low cement castables, insulating castables, conventional dense refractory bricks, insulation bricks, cold face, hot face insulation bricks, hot face insulation bricks, acid resistant bricks/components, membranes, acid resistant cement, construction chemicals, class 1 ar tiles and bricks 38mm and 75mm, 4457 vitrified ar tiles with 0% water absorption, 20mm & 25m, primer, mastics, pot. silicate cement, coerce cement, furnace based cement, crushed refractory boiler bed material, acid resistant tiles, acid resistant brick fireclay type, acid resistant brick red shale type, bitumen primer, epoxy resin & hardner, furan powder and syrup solution,.
Color index, number : 18 Hot alcoholInsolubile,% : 1.00 Application: 1. The plasticity and castability of heating, combined with its ability to absorb a large amount of infiltrated material, is of great value in the casting industry. 2. The lac resin is non-toxic. Based on the excellent characteristics listed above, the shellac resin is applied to alcohol paints, electrical insulating materials, printing inks, rubber fillers, and its use for oil and acid resistance. 3. Other industries: It has a wide range of important application value in many fields such as medicine, food, cosmetics, chemical industry, metallurgy, machinery, woodware, papermaking, electronics and military industry.
Product Name: Disposable Vinyl/Nitrile Blend Examination Gloves One-time use, no sterilization, no latex Single use, non-sterile, Latex free Model: S, M, L, XL Sizes: S, M, L, XL Color: blue, green, black, etc. Color: Blue, Green, Black etc. Structure: 5 fingers, with curling, regardless of left and right hands Structure: 5 fingers, beaded cuff for easy donning, ambidextrous Surface type: smooth surface Surface: Smooth Features : PVC/nitrile synthetic gloves are made of PVC resin and nitrile latex material. The product has PVC and The double advantage of nitrile gloves. The Vinyl/Nitrile Blend gloves is compounded with PVC paste and Nitrile latex, and the finished product has the advantage of both PVC and Nitrile glove. The donning feeling is better than vinyl gloves. Much softer than vinyl gloves Sturdy, wearable, longer wearing time than nitrile gloves The wearing time is longer than nitrile gloves. Has good wet hand wearability, easier to wear than nitrile and PVC gloves Easy donning with wet hands and easy donning than nitrile &vinyl gloves. PU coating, free of protein, effectively reduces the risk of allergies PU coating, with no protein in it, allergy risk is reduced effectively. Has better protection, has better acid resistance, alkali resistance and oil resistance Better protection, good resistance of acid, alkali and oil. Better cost-performance
