PRice - Rs.8.95 Piece
Description: cyclone is to separate the two-phase or multi-phase mixture of liquid-liquid, liquid-solid, liquid-gas and so on with a certain density difference under the action of centrifugal force. The mixed liquid is tangentially flowed into the cyclone with a certain pressure, and a high-speed rotating flow field is generated in the cylindrical cavity.
Description: cyclone is to separate the two-phase or multi-phase mixture of liquid-liquid, liquid-solid, liquid-gas and so on with a certain density difference under the action of centrifugal force. The mixed liquid is tangentially flowed into the cyclone with a certain pressure, and a high-speed rotating flow field is generated in the cylindrical cavity. Liuda Li
Air cyclones s
The cyclone is a single gas-cleaning device that uses a centrifugal force generated by a spinning stream to separate the particulate matter from the carrier gas. The single or multi cyclone can be made in a number of configurations to allow for higher collection efficiency or increased volumetric throughput. It can be used as a large single unit (figure 3-1), in parallel for increased volumetric capacity, in series for increased particle removal efficiency, or in a multi cyclone configuration (figure 3-2). Multi cyclone tubes are used for handing larger gas volumes. The cyclone tube arrangement is generally square or rectangular, and the tubes are arranged linearly. The number of cyclone rows is kept to a minimum to prevent hopper cross flow and to reduce gas distribution problems.
Overview : Dust is mainly the equipment of separating dust from the flue gas. The performance of the dust collector can handle the amount of gas, gas through the resistance loss and the efficiency of dust control. Filter types including mechanical filter, static and wet dust collector, cyclone dust collector, filter cartridge dust collector, dust, etc. Commonly the filter used in removing dust project is divided into four categories. The dust catcher is rely on a variety of power separation and filtration of dust particles from the gas. Cyclone dust collector : Cyclone after adding bypass, its working principle is the dust from the inlet gas tangential into the air, while get the rotary motion of upper and lower separated form the twin twist worm activity, dust in twin twist worm boundaries produce strong separation effect. Coarser dust particles with backspin cochlear flow separation to the outer wall, some of the dust by the bypass separate room in the middle of the mouth of the cave leads, the rest of the dust ash hopper with the downdraft. Topspin worm airflow gathered for fine particles of dust, thus improve the dust removal efficiency. This part of the fine dust particles by topspin cochlear flow upwards, which forms part of a strong rotation on the dust under roof and with topspin worm airflow into the bypass separation chamber, the upper part of the hole through the inlet into the cone, and the internal flow convergence after purification of gas from the exhaust pipes, isolated from the dust into the hopper
We are able to produce both Cyclone Breather and other automotive products which are manufactured by plastics. For more information, feel free to contact me. it depends on how many you would like to order
Cyclone Mesh
The screen of cyclone screen is cylindrical and placed in the machine body. After passing through the spiral conveying system, the materials are mixed with the air flow and atomized into the screen barrel; The materials are subjected to centrifugal force and cyclone propulsion force through the wind wheel blades in the mesh drum at the same time, so as to force the materials to spray through the mesh and be discharged from the fine material discharge outlet. The materials that cannot cross the mesh are discharged from the coarse material discharge outlet along the mesh drum wall. Feature introduction 1. The whole machine has the advantages of small volume, light weight, stability, no vibration, low noise, good tightness and high efficiency; 2. Simple installation and convenient operation; 3. It can be used with single machine or multiple machines, and can operate continuously for a long time; 4. The screen is washed by the cyclone and can be cleaned automatically; 5. Redispersion function for agglomerated materials; 6. The new type of outer spherical bearing prolongs the service life; 7. The machine can be matched with the pneumatic conveying system and directly connected into the air path to save resources; 8. New design: the gas protection system can deliver the purified air to both ends of the equipment, which can effectively reduce the temperature produced by the equipment during operation; Form a gas isolation layer for the bearing, so as to eliminate the entry of dust, effectively prolong the service life of the bearing, reduce the maintenance frequency and improve the work efficiency; 9. Can be specially designed; Mesh drum rotation system to meet special needs.
Cyclonic vacuum cleaner Features Cyclonic bagless design, washable hepa High dust cup capacity, automatic cord rewinding function Stepless speed control, 5 stage filtration with hepa Specification Power:1400w, 1600w, 1800w, 2000w Voltage:100v, 110v, 120v, 220v, 240v Noise level:
We manufactures Cyclone Dust Collector for High dust loading in woodworking environments, High temperatures, highly abrasive dust, Sticky dusts, For Boiler, Cement industries & Concrete industries, Power, Sugar, Pharmaceuticals & Special Purpose Projects. Our Cyclone Dust Collector operates on the principle of vortex motion where the centrifugal force is acting on each particle and therefore causes the particle to move away from the cyclone axis towards the inner cyclone wall. However, the movement in the radial direction is the result of two opposing forces where the centrifugal force acts to move the particle to the wall, while the drag force of the air acts to carry the particles into the axis. As the centrifugal force is predominant, a separation takes place. *Features of Cyclone Dust Collector: - High efficiency - Sturdy construction - No moving parts - Easy to clean - Construction with a fully welded centre cyclone
The Trima Cyclone System is created by two in-line high efficiency, twin Trima cyclones mounted in series. The advantage of the Trima design lies in its cumulative effect on air stream gases. For example, if the first cyclone in the air stream path is 90% efficient in removing 15 micron particles from the gas stream, a second tower of similar size will also remove 90% of the 15 micron particles from the gas stream remaining from the first tower; a cumulative efficiency of 99% on 15 micron size particles. Fostered with immense years of industry experience and market understanding, we are engaged in manufacturing, exporting and supplying excellent quality Trima Cyclone that is used to separate coarse from fine dust. This product is manufactured by utilizing quality approved raw material and advanced technology by our skilled professionals. Offered product is available in various technical specifications as per the requirement of our clients. Further, this is Trima Cyclone equipped with storage tanks, fluid pipelines, etc.
Lubricants and greases for every mechanical application A wide variety of more than 200 products available
Simple structure,no moving parts,high separation efficiency.Compared with other heavy medium separation equipments,heavy medium cyclone,separation speed is quicker,unit area treating capacity is bigger,separation particle size limit is lower,normally 0.5mm.Use lower suspension liquid density to get higher separation density(normally increase 0.2~0.4).Disadvantages are suspension liquid circulation capacity is big,medium purification system and adjustment control are complicated.
The basic principle of the hydro cyclone is to separate the two-phase or multi-phase mixture of liquid-liquid, liquid-solid, liquid-gas and so on with a certain density under the action of centrifugal force. The mixed liquid is tangentially flowed into the cyclone with a certain pressure, and a high-speed rotating flow field is generated in the cylindrical cavity. The high density components in the mixture under the action of the swirling flow at the same time along the axial downward movement along the radial outward movement in the reach of the force down along the wall along the wall, and from the bottom outlet, thus forming. The small vortex component moves toward the central axis and forms an upwardly moving internal vortex in the central of the axis, and then is discharged from the overflow port, thus achieving the purpose of two-phase separation.
GreenPower company produces and sells filter elements of various capacities multicyclone or battery cyclone. It belongs to a group of mechanical cleaners with dry cleaning method of high efficiency. Cleaning efficiency from particles sized 5-10 μm is 90%, while from particles that are larger is 99%. Production of cyclone elements from basal castings of modular construction improves their efficiency, durability and simplified assembly. Possible places of multicyclone (battery cyclones) using: ferrous and non-ferrous metallurgy enterprises, granaries and processing plants, bread-baking complex, oil-extraction plants, starch plants, energy industry, cement plants, chemical industry, coal industry, gas pipelines.
Application Dust Collecting Voltage 220V Automatic Grade Automatic Power 1-3kw Driven Type Electric Warranty 1year
Multi cyclone dust collectors
Dyson V10 Cyclone Cordless Vacuum
