Product Features : 1.Strong adhesion and economical choice. 2.Quick setting and curing time. 3.Easy and quick use. 4.Suitable for dry fastening. 5.Suitable for wall and overhead application. 6.Reduced anchor spacing and edge distance. 7.Variety of cartridge sizes are available. 8.Partially used cartridges can re-used by replacing the mixer nozzle. Base Material : Concrete,solid masonry ,and hollow bricks masonry. Application : Fixing machines,handrails,steel constructions,and reinforcement bars. Shelf Life : 12 months after the manufactured day if stored in perfect conditions.
Type: HM-500 Volume: 390ml Mix Ratio: 3:1 Color: Red or Black Density: 1.5±0.1g/cm³ Packing: 30 cartridges/carton High strength Wet resistance Anti-aging Convenience Good thixotropy Safe and Non-toxic Seismic resistance
As Per Client Requirement Of Vessel Design Requirement. We Can Carry Detailed Design And Fabrication As Per Requirement. With Heating, Cooling /heating Cooling Coils For Thermic Fluid /steam /electric, Agitators For Mixing, Safety Devices Like Pressure Relief Valves/measurement, Instrumentation For Measurement/ Structure Design., Etc. Also Can Be Supplied As A Complete Skid Kettles -non Pressursed Vessel Moc : Cs /cs Epoxy Lined / Ss / Alloy Steel.
DESCRIPTION ITSEAL is truly developed for sealing window frames with highly durable and flexible properties to withstand severe weathering and extreme temperatures. It seals small gap that normal sealant cannot reach and penetrate. It provides a truly watertight seal deep into minute joint and gap. FEATURES * ITSEAL is the only waterproof sealer that is completely watertight. * It is highly water repellent that no water can get through it during storm. * It adheres well on aluminum and glass * Once dried, ITSEAL is flexible and accommodate joint movement due to vibration. * Mill finish aluminum, oil or wet surfaces can also be well-sealed. VOC CONTENT Type of Regulated Adhesive under the Air Pollution Control (Volatile Organic Compounds) Regulation of Hong Kong: Architectural Sealant VOC Content (Ready to use): 248g/Ltr. SURFACE PREPARATION For maximum adhesion, the adhesive surface must be free of dust, release agent, oil and grease. Wipe surface with solvent is recommended. Solvent are obtainable from ITLS-SB. This information in this catalogue is provided to the best of our knowledge from results gathered both internal and external credited laboratories. However, we have no control over site applications, site conditions and workmanship of the applicator. We therefore will not accept any liability, either directly or indirectly arising from the misuse of these products or when the product is used not in accordance with any advice, specification, and recommendation of information given by us, The user is responsible for checking the suitability of these products for its intended use. APPLICATION ITSEAL can be used with hand operated or air operated grease pump. Other simple extruding device can also be used but it has to be solvent resistance. LIMITATION * Not suitable large gap wider than 5 mm wide and deep. For deeper joint fill to half of it, let it dry overnight and fill it up the next day. * Not suitable for use as expansion joint. COLOUR AND PACKING 26 kg / pail Grey/Black/Bronze/White SAFETY INFORMATION * ITSEAL is flammable. Please keep away from sources of ignition during application. * Avoid breathing in solvent by wearing solvent vapor respiratory mask in badly ventilated area or confined space. * Avoid contact with skin and eyes. If swallowed please contact doctor immediately. * ITSEAL meets the requirement of RoHS regulation of European Union and it does not contain eight heavy metals which were restricted by ASTM F963 or EN71 part3. * Please read the Material Safety Data Sheet in regards to flammability and health and hazard. SHIPPING/STORAGE INFORMATION ITSEAL must be stored in a cool place under 25°C and away from direct sunlight. The shelve life is 12 months if stored in accordance to the recommendation. Dangerous Goods Information: Cement Adhesive, Class 3, UN1133 PG III.
Certification: LR, BV, ABS, DNV-GL, KR, NK, CCS, RMRS... certificate available Surface treatment: sandblasting to S2.5 + one layer of shop primer; special paint available on request About Our Company: Our main business is manufacturing and sales of anchors, deck outfittings and other casted products. Advanced manufacturing facility, quality control system and inspection measures assure us supply you with high quality products. Our main products: Anchors -- All kind of Stock Anchor and Stockless Anchor, AC-14 HHP Anchor, Danforth Anchor, Delta Anchor, Stevpris Anchor..., with any class cert Deck Outfittings -- Stoppers, Fairleads, Bollards and Chocks..., with most class cert Bollards and front pannels for quay fenders All class certificate available LR, ABS, DNV-GL, BV, NK, KR, CCS, RINA, RMRS, IRS, CS, CRS, ZC...
TID POWER Fall Restraint (Anchor Point Tool) adopts moisture-proof small-mouth closed-cell foam filled high-strength epoxy glass fiber tube as the insulating body, equipped with U-shaped hanging ring, and light weight and high-strength aviation aluminum pole base and nylon ratchet holding rod locking system. This product can be used to fix the safety belt of line workers, and connect the anti-dropping device or light industrial equipment. Features: The design meets the load of 250kg, and the insulation distance is 160mm; Large U-shaped bolts are convenient for the operator to pass through the lifting ring easily; 50mm*1300mm nylon belt ratchet assembly can be quickly and easily connected to the pole.
DESCRIPTION Non-Skinning sealant is a one component, non-drying polybutene rubber based mastic. It does not harden but rather remains permanently soft and paste-like. Non-Skinning sealant has excellent resistance to water vapor transmission. FEATURES * Permanently non-skinning * Low shrinkage * Moisture resistance * Excellent adhesion USES * It is suitable for all kinds of plastics, metals, glass, masonry and timber. * It can also be used in installation of cool rooms and prefabricated construction. LIMITATIONS * It should not be applied in exposed joints where dirt pick-up and hand contact. * Not for: Used in areas subject to considerate dynamic stress. * Not for: Mobile homes, truck bodies. COLOR White, almond other colors are available upon request. APPLICATION * Surface must be clean and dry. * Cut nozzle to desired size. * Insert cartridge into caulking gun. * Push sealant ahead for uniform bead. * Clean off excess sealant with kerosene or mineral spirits. CAUTION Use appropriate personal protection to avoid contact with skin and eyes. In case of eye contact, flush with copious amounts of water for at least 15 minutes and get medical attention. In case of skin contact, wash affected areas with hand cleaner followed by soap and water. For further information, please refer to Material Safety Data Sheet (MSDS).
DESCRIPTION CC-604 is two components of water based surface paint, composed from water based of liquid epoxy resin and hardener and special pigment. APPLICATION 1. Waterproof of concrete wall, resist to mold and decorative coating. 2. Highly resist to chemicals in non-circulated places. 3. Suitable for hospital, operation room, food factory to prevent the mold, dust and bacterium. CHARATERISTIC 1. It is water based paint, and dilute by water, but its films strong after hard is not less than solvent based epoxy resin. 2. With good light resist quality, uneasy to become powder or change color, suitable for the environment with highly hygienic request. 3. Good to resist the radiation, can be used for the concrete wall and floor in the nuclear power factory. 4. Good adhesion to the moisture floor, can take as the primer for non-solvent or solvent based epoxy resin.
AC-14 HHP Anchor is widely used. There are two types, not balanced and fully balanced type. Certification: LR, BV, ABS, DNV-GL, KR, NK, CCS, RMRS... certificate available Surface treatment: sandblasting to S2.5 + one layer of shop primer; special paint available on request About Our Company: Our main business is manufacturing and sales of anchors, deck outfittings and other casted products. Advanced manufacturing facility, quality control system and inspection measures assure us supply you with high quality products. Our main products: Anchors -- All kind of Stock Anchor and Stockless Anchor, AC-14 HHP Anchor, Danforth Anchor, Delta Anchor, Stevpris Anchor..., with any class cert Deck Outfittings -- Stoppers, Fairleads, Bollards and Chocks..., with most class cert Bollards and front pannels for quay fenders All class certificate available LR, ABS, DNV-GL, BV, NK, KR, CCS, RINA, RMRS, IRS, CS, CRS, ZC...
Epoxy adhesive, caulking guns, anchors, silicone sealants, anchor rod.OEM service and Buyer Label Offered
Description CS-613 is a multipurpose water-based epoxy sealer/putty/adhesive. Itâ??s developed for filling seam, gap between Calcium Silicate board. It is environmentally friendly which does not pose health hazard to user and dwellers. The best part is how easy it can be cleaned with just water. Itâ??s easy to mix even by hand due to our innovative water-based technology. Features / Benefits *Paintable easily with water-based coating; can be painted after 1 day without work delay hence reduce time and save money. * Easy to use: Compatible with damp surface, time is saved in waiting for it to dry up; Washable with water including tools. Best to wash as soon as possible before it hardens. * Smooth to tool with trowel; Non-sagging characteristic making it easy to use on vertical wall and ceiling. * Stronger adhesion due to higher amount of binders used. * High solid by volume; 100% water resistant when cured. * Low odor/ solvent free/ VOC free, it does not pose health hazard to user and dwellers.
Design:hall anchor Weight (kg):6001 - 8000kg Certification:LR hall anchor:hall anchor Place of Origin: Qingdao,Shandong Certificates:ABS,LR,BV,NK,DNV,GL,KR,CCS,RINA, ,CS, ISO9001 Design:Bruce Anchor Weight (kg):1001 - 3000kg Name:Delta Flipper Anchor material:ZG200-400C,Q235,Q345 Product name:Marine Ship Anchor Weight: 10KGS to 46000KGS Surface Treatment:Black bitumen paint, anti-rusting paint High Holding Power Welded Anchor (HHP type) High holding power anchor has two types: one is stock HHP anchor,like danforth anchor, and another one is stock-less HHP anchor . Such as AC-14 anchor. It is widely used for dredging, offshore mooring, fish farm, and yachting operation. Standard or fully balanced type for your ship design. With SS316L material option or with H.D.G. finishing for your multi purposes.All high holding power anchor was approved by ABS,LR,DNV,GL,BV,RINA,BKI,CCS etc.
Description CS-613FD is a water-based multi-purposed epoxy putty and adhesive. It is developed for filling seam, gap between Calcium Silicate board. It is environmentally friendly which does not pose health hazard to user and dwellers. The best part is how easy it can be cleaned with just water. It is easy to mix even by hand due to our innovative water-based technology. Features Paintable easily with wb coating Easy to use Smooth to tool with trowel Non-sagging Stronger adhesion High solid by volume; 100% water resistant when cured. Low odor VOC free / Solvent free Uses Gypsum boardCalcium silicate board Fiber cement board Plywood / Timber Concrete / Tile It may be suitable to use on other substrates not mentioned above. Application 1. The surface to be adhered must be free of dust, release agent, oil and grease 2. Mix part A and part B with 1: 1 (by volume), and stir until homogeneous as indicated by uniform color. 3. Do not stir or mix the two parts on the application surface.
Carbon fiber, cfrp, cabon fiber reinforced polymer, carbon fiber plate, carbon fiber fabric, chemical anchor, anchor epoxy, crack injection, carbon fiber laminate, crack injection, carbon fiber strip, adhesivr anchor.
CS-613W is 2-component water-based premium epoxy product. CS-613W as admixtures can improve the properties, particularly in relation to water absorption reduction, toughness enhancement, vibration damping and increase of the bond strength of cement to reinforcements other than being used as admixtures, CS-613W is used partial replacement of fine aggregate, for coating, sealing and repairing concrete and for coating steel reinforcing bars for corrosion protection. AREA OF APPLICATIONS Repair mortar for concrete areas. Industrial flooring. Bonding agent for new to old concrete. As water based primer. Can be applied with damp surface. FEATURE Weatherproof and waterproof of capabilities that help prevent the deterioration of the ground-coat material. Low odor. Washable with water including tools. Best to wash as soon as possible before it hardens.100% water resistant when cured.
.Guniting, shotcreting, shoring, retaining, painting, sand/shot/grit blasting, rock drilling, anchoring, grouting, epoxy coating
Spek Type Anchor Anchor Weight, kg., Dimensions in mm, A, B, C, D, E, H, L, 380, 600, 827, 190, 412, 258, 780, 1080, 480, 650, 902, 205, 442, 280, 846, 1170, 610, 700, 960, 221, 472, 302, 910, 1260, 735, 750, 1030, 235, 502, 320, 975, 1350, 880, 800, 1100, 251, 542, 340, 1040, 1440, 1030, 850, 1170, 270, 568, 362, 1102, 1530, 11050, 900, 1240, 286, 587, 388, 1168, 1620, 1400, 950, 1299, 295, 644, 420, 1229, 1710, 1750, 1000, 1378, 316, 671, 442, 1300, 1800, 2020, 1050, 1454, 330, 706, 460, 1362, 1890, 2360, 1100, 1514, 343, 744, 480, 1424, 1980, 2750, 1150, 1584, 362, 788, 492, 1502, 2070, 3000, 1200, 1650, 380, 801, 520, 1560, 2160, 3700, 1350, 1850, 418, 890, 580, 1743, 2430, 4000, 1400, 1927, 438, 910, 610, 1813, 2520, 5100, 1450, 2000, 451, 954, 626, 1864, 2610, 5800, 1500, 2060, 467, 998, 642, 1946, 2700, 6600, 1550, 2138, 490, 1030, 660, 2006, 2790, 8000, 1700, 2333, 533, 1118, 734, 2210, 3060,
Size Length Color Material M20 260mm yellow or whitev 5.8,8.8,A2,A4 1) M20X260 2) No squeezing pressure on the base material 3) Capable of bearing high load 4) Resistant to moisture and water 5) Suitable for anchor base temperature up to 120 degrees 6) Drill hole sealed by mortar 7) Anchor studs: 5.8 or 8.8 grade, zinc plated, yellow or white, hot dip galvanized, stainless steel A4 8) Low requirement of the edge and space distance
For 360ml, 345ml cartridge, metal 1) 9" 2)Dimmensions:44*32*22 3)Packing:12pcs/CTN 4)N.W:13KG/CTN, G.W:14KG/CTN
Glass tube, Styrene free The capsule size is from 8mm to 30 mm with threaded anchor rod. A capsule contains acrylate resin (vinyl ester), peroxide(hardening agent), quartz particle.When the components are combined, they form an adhesive mortar which mechanically bonds the anchor rod to solid base material. This type of system must be used with a chisel pointed anchor rod which spin into it with a rotary hammer drill. 1) Chemical material: acrylic resin,styrene free, quartz particle 2) Glass tube: easy to pack 3) Rapid condensation 4) steady to humidity 5) Easy to apply 6) Temperature range: - 5 ~ +40ípC 7) Shelf life: 12 months 8) Resistant to acid and alkali,and aging; fire and heat-resistant
