It can stand on its own with a base. The cross is suitable for a table. Made from carefully selected wood that has been dried using a wood drying machine. The finishing is very smooth, using a strong paint coating. Size: 84 x 45 x 18 cm.
- Material : Solid SS304, SS316, SS316L ( also available in some models with hollow tube) - Shape at top of the spigot: Round/dome top or slopped as shown in the picture) - Also available in Square shape - Spigot no hole in the glass panel. - Spigot with base plate and cover ring - Dimensions: 48 x 155mm, 48*220mm, 48*300mm with base plate. - include the black gasket and stainless steel insert - Mirror polished or satin stainless steel.
Base material:solid brass, ss304, ss316 Finish:chrome, satin nickel, pearl satin,pss-polished ss, sss- satin stainless steel, pvd, gold, brass polished For use on: tempered glass thickness 6mm to 12mm glass Edges:straight egdes/beveled edges Recommended glass door weight for three hinges:heavy duty hinges: 3 hinges- 54kgs Recommended glass door weight for two hinges: heavy duty hinges: 2 hinges- 34kgs Glass cuts: square glass cut, ear mouse glass cut, round glass cut Glass door swing:90,135, 180 degree, full swing.
FH SERIES OF PRODUCTS: FH products are Pure nonionic derived the endosperm of guar polysaccharide (Cyamopsos tetragonolobus). The products are unique with ultra-high viscosity with fastest hydration characteristics as shown in Figure 1 below. Also, when added with other drilling components, to seawater, a KCl solution or other aqueous system, the product suspension disperses readily without lumping, even under low-shear conditions generating most of its full viscosity within just a few minutes. PRODUCT COMPATIBILITY: FH series of products are compatible with most of the chemicals and auxiliaries used in drilling operations. However, the products are not compatible with Arabic and Crystal gums. Also, in presence of borates they form elastic gel. PRODUCT APPLICATIONS: FH series of products are natural, high viscosity, fast hydrating non-Newtonian hydrocolloids with suitable cross linking components in diesel slurries and are versatile for continuous mix applications, where extremely fast hydration and subsequent viscosity development is required. They are excellent viscosifiers, stabilizers, thickeners and suspending agent for use in oil-drilling, workover fluids and several other oilfield applications like hydraulic fracturing, oil well stimulation, mud drilling, oil well capping, flocculent and liquid shoring etc. The product is used as a surfactant; synthetic polymer and deformer ideally suited for all rheological requirements of water based and brine based drilling fluids. Specifications:- PRODUCT : FH-35 FH-38 FH-42 CAS No. : 9000-30-0 9000-30-0 9000-30-0 Granulation : FINE FINE FINE APPEARANCE : OFF WHITE POWDER MOISTURE : 8% Max. 8% Max. 8% Max. PROTEIN (N X 6.25) : 5.0% Max 5.0% Max 5.0% Max ASH : 1.5% Max. 1.5% Max. 1.5% Max. ACID INSOLUBLE RESIDUE (A.I.R.) : 3% Max. 3% Max. 3% Max. CARBOHYDRATE (incl gum by difference) : 82% Min 82% Min 82% Min pH (1% Solution) : 5.5 ? 6.5 5.5 ? 6.5 5.5 ? 6.5 VISCOSITY : (0.48% Product in 2% KCL Sol. 2.5 mins mix @1500 RPM in waring blender) Fann 35sa Viscometer at 300 RPM, 25�C 3 Mins : 35 3 Min:38 3 Mins : 42 5 Mins : 37 5 Mins : 39 5 Mins : 43 30 Mins : 39 30 Mins : 42 30 Mins : 45 60 Mins : 40 60 Mins : 43 60 Mins : 47
WATER HYACINTH OTTOMAN CHAIR Add a new element of functionality to any living space with this gorgeous woven ottoman. This ottoman is the perfect size to function as a footrest for any accent chair, or can even function as a stand for photo frames, a tray or decorative items. This multi-functional ottoman is also a great easy solution for extra living room seating while guests are over, and can even be used as an end/side table next to a chair or sofa. The gorgeous weave on this ottoman, rich in color and made with the utmost craftsmanship will be a guaranteed stunning addition to any room. With two timeless shape choices, round and square, you are sure to find your perfect fit.
FryShineTM is a Physically Modified starch, Vegan, Gluten-Free, Plant-based, Non-GMO starch. It is produced by Physical modification of starch with functional food ingredients to enhance the textural properties and expansion of fryum related products. FryShineTM is used to enhance the texture of Fryum related products. FryShineTM disperses well with other ingredients and improves the overall crispiness of the product. The starch molecules in FryShineTM form strong cross-links with other ingredients and create network like structure. When fried in oil at high temperatures, moisture and air bubbles trapped will evaporate and forms a porous structure which in turn provides the crispy texture. This process will also increase the expansion ratio of the product. FEATURES AND BENEFITS *FryShineTM enhances the texture of the product providing excellent crispiness *It improves the shiny appearance of the product *It can be used as Functional Food ingredient and label friendly product *It is minimally processed starch with no residues of chemicals. *It is highly bio-degradable and causes no harm to the Environment. *FryShineTM is a White powder that adds no color to application and blends well with other ingredients. It has a bland taste and so will not mask flavors or aromas. DOSAGE Use 1 to 3% FryShineTM of total batch size. For excellent results, maybe use upto 5% FryShineTM of total batch size.
This is chemical setting Furan based chemical resistant mortar which is combination of Liquid and Powder, when mixed in proper proportion from workable mortar which after setting and curing give of liquid and give black highly cross linked composites. Furan When set and cured is resistant to highly corrosive acids, alkalis and to powerful organic solvents such as ketones, Aromatic and Chlorinated solvents. It has extreme resistant to Acidic & alkalis, Salts, Greases and Detergents. It resists to Organic & Inorganic acids at their boiling temperature. It is suitable against mild chlorine Gas (dry) phosphorous trichloride, pyridine at room temperature. Furan is especially useful where resistance to mixed media such as aqueous acids /alkalis and organic solvents is needed in chemical plant process and waste streams. Carbon filled Furan is used against corrosive effect of hydrofluoric acid & its salts. PREPARATION OF FURANE MORTAR : Mortar consist of Furan solution and Furan powder. The average mixing ratio necessary to obtain mortar with good working consistency is 1 part by weight Solution & 3 part by weight powder. The ratio will vary slightly depending on temperature and working conditions.Stir the liquid thoroughly before using. Place liquid in a suitable shallow mixing pan. Add powder by weight in the solution mix thoroughly and rapidly until all lumps are dispersed and the mortar is completely homogenous. Spread out the mortar in a thin layer, not more than ¾ thick, to dissipate the heat of reaction and lengthen the working life. Batch size can be varied depending upon the temperature and the speed with which the masons are working. Very large batches will become stiff quite rapidly. Make sure that all the Furan Motrar is used from the pan before another batch is mixed.When working at temperature above 40 C, very small batches not more than 2 Kgs, should be prepared. When working at temperature below 15C the liquid should be kept warm.
Smart Home Appliances- Kitchen Helpers ? Hand Blender with Chopper HHB-177E Onyx Black Easy Grip Ergonomic Design 3 Different Blades Attachment Base Stand for Easy Storage of Blender Drawer for Storage of Accessories Holder for Storage of Power Cord 250 Watts Powerful and Durable motor 18000 RPM Smooth and Safe Switch Hygienic Stainless Steel Beater Whisk & Mincer Blades Hygienic Stainless Steel Shaft Non-slip Rubberized Underside for Safe Standing Long Power Cord
Clear Acrylic Display Stand 6 INCH x 4 INCH Size ( 6 PICES COMBO ) Material: The display stand is made from clear acrylic, a durable and lightweight material that offers excellent transparency. Acrylic is resistant to shattering and provides a sleek and modern appearance. Shape and Size: The stand typically has a rectangular shape, with straight edges and clean lines. The size can vary depending on the specific model, but common dimensions range from small tabletop versions to larger freestanding displays. Transparency: The clear acrylic material ensures maximum visibility, allowing the displayed items to be easily seen from different angles. The transparency of the stand enhances the visual appeal of the showcased items and creates a clean and minimalist look. Stability: The stand is designed to be stable and secure, ensuring that the displayed items are held firmly in place. The base is often wider and heavier to provide stability and prevent tipping over. Versatility: Acrylic rectangle display stands can be used to showcase a wide range of items, such as products, literature, signage, artwork, or collectibles. They are suitable for displaying items of various sizes and weights. Ease of Use: The display stand is simple to use and requires no assembly. You can easily place or remove items from the stand, making it convenient for changing displays or arranging new products.
Safety Insulin Syringe with Restractable Needle Safety Characteristics: after absorbing the expected dose of liquid medicine, if transportation is needed, push up the sliding-sleeve to protect the needle tip from physical damage during transportation; push the sliding sleeve to expose the needle tip before the injection starts, when the expected dose of liquid medicine is 100% injected, manually slide the sliding sleeve to the position where the connector base can no longer slide, the needle tip is completely covered in the sliding sleeve, and then the sliding sleeve is manually rotated until it is locked, it could effectively preventing repeated use and accidental needle sticking, and avoiding cross infection.
Material PE Brand SuperStick Color Transparent Length Customized Feature Water Proof Packaging Type Roll Core Size 3 Inch Design Plain Is It Customised Customisation Adhesive Acrylic Feature Antistatic Filament Tapes are made with Fibre Glass Reinforce backing made up of Polyester Film with Glass Yarn, Coated with Solvent Based or Hot melt Rubber Adhesive. Application: Heavy duty packing. Bundling and strapping of metal coils. Pipes and tubes temporary Holding parts. Appliances in house hold and electric appliance manufactures. There are two kind of backing available: Straight line fiberglass (mono) Mesh fiberglass (cross)
Price - Rs 55,000/ Piece Frame Material : Wood Seat Material : Fabric Seat Material : Fabric Cushion : Seat & Back Cushion Color : White Arm Type : Armrest Base Style : Stationary Appearance : Modern Seat Shape : Square Rattan calcutta wooden dining chair with white upholstery. Any customisation can be done according to requirements of the interior designer or buyer
It can stand on its own with a base. The cross is suitable for a table. Made from carefully selected wood that has been dried using a wood drying machine. The finishing is very smooth, using a strong paint coating. Size: 63.6 x 32 x 13.6 cm.
It can stand on its own with a base. The cross is suitable for a table. Made from carefully selected wood that has been dried using a wood drying machine. The finishing is very smooth, using a strong paint coating. Size: 43 x 22.6 x 9.2 cm.
Sleeping sets, mattress, base, headboard, ,night stand.
Features Of Steel Billets Steel billets result from the second stage of the steel production process. They are hot-rolled or forged from an ingot or strand cast. Smaller and longer than a bloom, billets are usually a square cross-section less than 36 square inches. They are used for the manufacture of all ‘long’ steel products such as bars, rods, pipes, tubes, wire and wire products.